RAVENOL VGL SAE 70W-80
Kategorie: Gear oil for manual transmissions and drive axis
Artikelnummer: 1221112
Viscosity: 70W-80
Specification: API GL-5 + LS, MIL-L-2105 D, MT-1
Oil type: Full synthetic
Recommendation: BMW 83222413512, BMW 83222447362, BMW
Hypoid Axle Oil G3, BMW Hypoid Axle Oil G4, Mazda Hypoid Gear Oil
(SG1), Mazda K020-01-SG1, VW G 060 190 A2
RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with
the latest full synthetic components for vehicles with most recent
transmission technology.
RAVENOL VGL SAE 70W-80 is designed on the basis of high quality
synthetic base oils with special additivation and inhibition, which ensure
proper functioning of the gearbox. It was specially developed to meet the
latest requirements of axle drive manufacturers, especially for BMW
vehicles.
1L | 1221112-001
RAVENOL VGL SAE 70W-80 ensures proper functioning of the
4L | 1221112-004
aggregates even under the most severe operating conditions. Even under
10L | 1221112-010 large temperature fluctuations it ensures a reliable lubricating film.
20L | 1221112-020
20L | 1221112-B20 Application Note
60L | 1221112-060
60L | 1221112-D60 RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle
drives of vehicles. It is particularly suitable for axle drives with hypoid
208L | 1221112-208
gearing.
208L | 1221112-D28
1000L | 1221112-700 Use RAVENOL VGL SAE 70W-80 according to the manufacturer's
instructions!
Characteristics
Outstanding cold flow properties
Good wear protection protects the gearbox
Excellent resistance to aging
Extremely low pour point
High viscosity stability
Reduces running noise
Technical Product Data
PROPERTY UNIT DATA AUDIT
Density at 20 °C 848 EN ISO 12185
Colour gelbbraun VISUELL
Viscosity at 100 °C mm²/s 9,27 DIN 51562-1
Viscosity at 40 °C mm²/s 50,47 DIN 51562-1
Viscosity Index VI 169 DIN ISO 2909
Brookfield Viscosity at -55 °C mPa*s 109400 ASTM D2983
Pourpoint °Celsius -63 DIN ISO 3016
Flashpoint °Celsius 214 DIN EN ISO 2592
Seq. I at 24 °C 0/0 ASTM D892
Seq. II at 93,5 °C 10/0 ASTM D892
Seq. III at 24 °C after 93,5 °C 0/0 ASTM D892
Copper Corrosion (24h/120 °C) 1a ASTM D130
All indicated data are approximate values and are subject to the
commercial fluctuations.
Alle angegebenen Daten sind ca. Werte und unterliegen
handelsüblichen Schwankungen.
19.07.2023
