Scribd
Upload
65 views2 pages

601fm CGB

This document provides information about a conventional infrared flame detector including its features, description, part numbers, technical specifications, dimensions, wiring, and field of view. The flame detector can detect fires without being blinded by oil mist, requires no additional power source, and can interface with an AutroSafe fire detection system.

Uploaded by

mehdi.ss910
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views2 pages

601fm CGB

This document provides information about a conventional infrared flame detector including its features, description, part numbers, technical specifications, dimensions, wiring, and field of view. The flame detector can detect fires without being blinded by oil mist, requires no additional power source, and can interface with an AutroSafe fire detection system.

Uploaded by

mehdi.ss910
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Conventional infrared flame detector 601F-M

Product datasheet

Features
 Unlike UV and UV/IR detection, not blinded by
oil mist in machinery spaces
 No additional power source required
 Easy installation
 Can be used on all vessels as fully marine
approved
 Easily interfaced to AutroSafe fire detection
system

Description
The flame detector 601F-M is full-featured solar
blind flame detector for enclosed/indoor use and
boast a high degree of false alarm immunity. It is
designed for connection to a conventional zone of
point type fire detectors that may include any mix of
detection technologies.

The detector can be interfaced to the AutroSafe


system by a specially designed flame detector
interface built into the deckhead-mounting box.
(See separate datasheet for Flame Detector
Interface, 116-P-FLAMEDETINTERF/CGB.)

Part number Description Technical specifications


116-5861-010.2011 IR Flame detector head 601F-M Weight (g) 74 g

116-5861-010.2012 Detector base for 601 series Detector material FR110 ´BAYBLEND´

Dimensions 128 x 21,2 mm

Accessories Supply voltage 18-32VDC

Part number Description Quiescent current Typical 300 micro Amp

116-5861-010.2014 Deckhead mount. kit 601 series Alarm current 8-30mA

116-5861-010.2015 AutroSafe Flame Detector Interface Operating temperature -20°C to +70°C

Storage temperature -40°C to +80°C

Relative humidity 90% RH continuous (non-condensing)


and up to 99% RH intermittent
(non-condensing)

Range 0,1 m2 n-heptane at 20m


0,4 m2 n-heptane at 50m

Field of view 100°

116-P-601FM/CGB, Rev. B, 2012-12-07 Protecting life, environment and property…


Conventional infrared flame detector 601F-M

Dimensions

Detector base wiring

Conventional system:

AutroSafe system: See data sheet 116-P-FLAMEDETINTERF/CE

Field of view

Note: When the risk is a hot vibrating body the detector


should be mounted securely using a suitably fabricated
bracket at an angle or on a vertical surface to view the
risk.

AUTRONICA FIRE AND SECURITY AS


Head office, Trondheim, NO-7483 Norway Tel: +47 73 58 25 00, fax: +47 73 58 25 01, e-mail: info@autronicafire.no
Oil and Gas division, Stavanger, Norway Tel: +47 51 84 09 00, fax: +47 51 84 09 99
Maritime division, Spikkestad, Norway Tel: +47 31 29 55 00, fax: +47 31 29 55 01

Visit Autronica Fire and Security AS’ website: www.autronicafire.com

You might also like