LAUNDRY AND LINEN
ORIGINAL CONTRACT VALUATION 08 RESTORATION
DESCRIPTION WORK DONE MEASURED
ITEM UNIT QTY RATE AMOUNT QTY AMOUNT
% AMOUNT
I SANITARY FITTINGS - INSTALL ONLY- LAUNDRY & LINEN
Price to Install, test and commission the following sanitary appliances including their support
brackets, screws and any other items required to install the appliances not detailed in the description
but required as per the manufacturer's installation guides including their connection to water supply,
waste/soil drainage, fixing sealants and electrical power supply where applicable.
VALUATION 08
A DHOBI SINKS
Heavy duty Stainless dhobi sink of size 500x400x285 deep suitable for mounting on counter complete
NO. 7 1,500.00 10,500.00 14 100% 21,000.00 21,000.00
with40mm diameter chrome plated bottle trap and chain waste fitting and plug.
B LONG NECK BIB TAP FOR DHOBI SINK
15mm diameter chrome plated back inlet long neck bib tap as Tapis NO. 7 300.00 2,100.00 14 100% 4,200.00 4,200.00
C BIP TAP
1/2" Chrome Plated Hose Union Bib tap and a 3/4" threaded connection to connect to tap connectors with a
i threaded connection as Pegler or equal and approved. Flow not to exceed 2 liters per minute NO 2 300.00 600.00 2 100% 600.00 600.00
TOTAL FOR SANITARY SUPPLY FOR LAUNDRY & LINEN TO COLLECTION PAGE 13,200.00 25,800.00 25,800.00
-Page 36 L
LAUNDRY AND LINEN
DESCRIPTION WORK DONE
ITEM UNIT QTY RATE AMOUNT QTY AMOUNT
%
II PLUMBING INSTALLATIONS FOR LAUNDRY & LINEN
Supply, install, test and commission the domestic (potable) cold water supply distribution network
with high density PE piping, with a minimum pressure rating of 16 bar, in accordance with British or
European standards. Allow for its installation in the ground as well as all necessary pipe fittings from the
A
same manufacturer, as required to complete the distribution network, including (but not limited to) the
connectors, adaptors, supports and accessories required for the satisfactory execution, completion and
operation of the system.
i Φ32 diameter Lm 18 600.00 10,800.00 18 100% 10,800.00
B DOMESTIC COLD WATER SUPPLY PPR PIPING AND FITTINGS
Supply, install, test and commission the installation of the POTABLE WATER DISTRIBUTION SYSTEM
WITH PP-R PIPING 80, TYPE 3 MINIMUM PRESSURE RATING AS PN 20 BAR to conform to the
requirements of BS Standards and to the particular requirements of the site. Allow for all pipe fittings of
same manufacturer as required to complete the distribution system and all necessary fittings, including
but not limited to tapped ends, flexible connectors and accessories and fixing required for the satisfactory
execution operation and completion of the work.
i Φ25mm diameter Lm 12 600.00 7,200.00 12 100% 7,200.00
ii Φ32mm diameter Lm 14 700.00 9,800.00 14 100% 9,800.00
C NON RETURN VALVES
Supply, install, test and commission the installation of NON RETURN VALVES according to
specifications for water piping, with all necessary fittings and accessories and fixing required for the
satisfactory execution operation and completion of the work.
i DN20 (PPΦ25) diameter Item 1 2,800.00 2,800.00 1 100% 2,800.00 2,800.00
D BALL VALVES
Supply, install, test and commission the installation of BALL VALVES according to specifications for
water piping, with all necessary fittings and accessories and fixing required for the satisfactory execution
operation and completion of the work. Units to be as Pegler or watts
i DN20 (PPΦ25) diameter Item 2 4,500.00 9,000.00 2 100% 9,000.00
E MANHOLES AND CHAMBERS
Supply, installation, testing and commissioning of closed flow sewage water system manhole with cast iron
access cover. Procedures in accordance with specifications and on-site requirements, including (but not
limited to) all necessary sealings, penetrations, fittings, fixings, adaptors, connectors, supports and
accessories required for a complete and satisfactory installation.
600x600 up to 1000mm depth
i Item 1 21,500.00 21,500.00 1 100% 21,500.00 10,750.00
600x600mm cover(Class A15)
E DRY POWDER FIRE EXTINGUISHER
Supply and install the portable dry powder fire extinguisher, 6kg. Allow for all necessary equipment and
works required, including (but not limited to) the supports and accessories required for the satisfactory Item 2 7,500.00 15,000.00 2 100% 15,000.00
execution, completion and operation of the system.
76,100.00 76,100.00 13,550.00
TOTAL FOR LAUNDRY & LINEN PLUMBING C/F TO COLLECTION PAGE
-Page 37 L
LAUNDRY AND LINEN
DESCRIPTION WORK DONE
ITEM UNIT QTY RATE AMOUNT QTY AMOUNT
%
III FOUL & WASTE WATER DRAINAGE LAUNDRY & LINEN
Ιinstall, test and commission the installation of u-PVC pipe work for the Drainage system with a minimum
pressure rating of PN 8 bar in accordance with specifications and requirements of the site with all necessary
wall penetrations. Allow all necessary fittings, including but not limited to fixings, adaptors, connectors
and accessories including traps, cleanouts, external vent cowls, access fittings, pipe fittings, supports, tapped
A ends, pipe hangers etc. required for the satisfactory execution of the work and efficient operation of the
drainage system complete in all respects. The manufacturers pipe jointing recommendations shall be fully
complied. All pipe and fittings to be from same manufacturer
i Φ40mm diameter Lm 3 700.00 2,100.00 3 100% 2,100.00
ii Φ50mm diameter Lm 24 950.00 22,800.00 24 100% 22,800.00
iii Φ110mm diameter Lm 18 1,600.00 28,800.00 18 100% 28,800.00
B FLOOR TRAP
Supply, Install, test and commission,Chrome plated floor drain with stainless steel frame and stainless steel
access cover with drainage holes with all necessary equipment required for the satisfactory execution
Item 2 2,500.00 5,000.00 2 100% 5,000.00
operation and completion of the work.
C SEWAGE MANHOLES
Supply, installation, testing and comissioning of closed flow sewage water system manhole with cast
iron access cover. Procedures in accordance with specifications and on-site requirements, including (but not
limited to) all necessary sealings, penetrations, fittings, fixings, adaptors, connectors, supports and
accessories required for a complete and satisfactory installation.
600x450 up to 800mm depth
Item 1 21,500.00 21,500.00 1 100% 21,500.00 10,750.00
600x450mm cover
D GULLEY TRAP
Connect to Gulley trap chamber size 350x350x450mm deep, in masonry walling, housing a uPVC gully trap
with drain pipe, 50mm thick P.C.C. cover with vent-hole etc. and allow for excavation in soil or murram, and No. 0 6,500.00 - 0 0% -
making good.
VII RAIN WATER DRAINAGE
Supply, install, test and commission the installation of u-PVC pipe work for above ground Rainwater System
with a minimum pressure rating of PN 6 bar in accordance with specifications and requirements of the site
with all necessary wall penetrations. Allow all necessary fittings,including but not limited to fixings, adaptors,
connectors and accessories including traps, cleanouts, external vent cowls, access fittings, pipe fittings,
A supports, tapped ends etc. required for the satisfactory execution of the work and efficient operation of the
drainage system complete in all respects. The manufacturers pipe jointing recommendations shall be fully
complied.
i Φ110mm diameter Lm 15 1,600.00 24,000.00 15 100% 24,000.00
COST OF DRAINAGE FOR LAUNDRY & LINENTO COLLECTION PAGE 104,200.00 104,200.00 10,750.00
-Page 38 L
LAUNDRY AND LINEN
ITEM DESCRIPTION WORK DONE
UNIT QTY UNIT RATE AMOUNT QTY AMOUNT
%
COLLECTION PAGE
I B/F FROM SANITARY FITTINGS INSTALL ONLY FOR LAUNDRY & LINEN NO 1 13,200.00 13,200.00 1 25,800.00 25,800.00
II B/F FROM PLUMBING SUPPLY FOR LAUNDRY & LINEN NO 1 76,100.00 76,100.00 1 76,100.00 13,550.00
III B/F FROM FOUL DRAINAGE FOR LAUNDRY & LINEN NO 1 104,200.00 104,200.00 1 104,200.00 10,750.00
CARRY FORWARD TO MAIN SUMMARY PAGE 193,500.00 206,100.00 50,100.00
-Page 39 L
