Technical Datasheet
Revision: 03/06/2019
COLCAR H-58
TYPE OF ADHESIVE Synthetic Hotmelt Adhesive based on rubber.
Hotmelt adhesive specially recommended for binding the
hinge and backer (side part of spine book) especially
Bookbinding when a great adhesion is required and when difficult
papers are used. It has an excellent adhesion on treated
polypropylene.
FIELD OF
Hotmelt designed for the mattress manufacture,
APPLICATION
especially to stick polyurethane foams.
It shows excellent adhesion in many materials used in
Mattresses
the mattress sector.
It has very good thermal resistance and excellent shear
and cohesion.
APPLICATION MODE By injection, roller or swivel.
APPLICATION
150 – 170 ºC
TEMPERATURE
Color Beige. Almost transparent
Presentation (shape) Mini-pillow around 25g
Brookfield RVT Viscosity 160 ºC 2800 – 3800 mPa.s
(ASTM D 3236 Method) 170 ºC 1800 – 2700 mPa.s
TECHNICAL DATA Softening point (ring & ball)
87 – 94 ºC
(ASTM E 28 Method )
Open time Long
Setting time Very short
Thermal stability Good
Mattresses: Do not mix with APAO products (incompatibility).
CAUTION
Bookbinding: Do not mix with EVA products (incompatibility).
Shelf life: two years under normal storage conditions and closed box.
STORAGE The product should be stored avoiding extreme temperatures. It is
advisable between 15-30 ºC.
PACKAGING 15 kg in cardboard boxes.
To clean the coating equipments we recommend our SANYWAX-200
CLEANING
cleaner or cold cleaning agent based on organic solvents.
IMPORTANT
This technical information is based on our best practical knowledge and in studies performed by our technical department. Our
warranty about the results is limited only to maintain the quality of the product and their continuity because it is impossible to check
all the ways our product is used. For this reason, other legal responsibilities cannot be demanded. Owing to the great number of
Productos Colcar
c/ Compositor Beethoven, 10-20, Polígono Industrial Can Jardí 08191 Rubí (Barcelona) Spain
colcar@productoscolcar.com +34 93 337 17 75 / +34 93 337 29 81 www.productoscolcar.com
different materials existing in the market, we always recommend making previous tests in order to warrant a satisfactory result in
every specific case.
Productos Colcar
c/ Compositor Beethoven, 10-20, Polígono Industrial Can Jardí 08191 Rubí (Barcelona) Spain
colcar@productoscolcar.com +34 93 337 17 75 / +34 93 337 29 81 www.productoscolcar.com
