TECHNICAL DATA SHEET

STAINLESS STEEL LANDING VALVE SINGLE OUTLET

1.0 REFERENCE STANDARDS IS : 5290 – 1993 TYPE-A

2.0 APPROVALS ISI MARKED

3.0 SIZE 75mm FLANGED INLET & 63mm INST.

OUTLET
3” FLANGE (Drilling as per IS: 1538 FF)
4.0 MATERIAL OF CONSTRUCTION

4.1 BODY, BONNET, STOP (SEAT) VALVE,

CHECK NUT, GLAND NUT, FEMALE INST.
OUTLET IS: 3444 Gr. 1 (SS 304)

4.2 SPINDLE IS: 6603 (SS 304)

4.3 HAND WHEEL CAST IRON IS: 210 FG 200

4.4 SPRING IS: 6528 (SS 304)

4.5 WASHER RUBBER IS: 937 Type – ‘A’

5.0 DIMENSIONS AS PER DRAWING

6.0 FINISH  BODY TO BE PAINTED BY 3 COATS OF

FIRE RED PAINT AS PER IS:5, SHADE
NO:536 OVER 2 COATS OF ZINC
CHROMATE PRIMER.
 HAND WHEEL TO BE PAINTED BY 2
COATS OF BLACK PAINT.
7.0 PERFORMANCE REQUIREMENTS
14 kgf/cm2. (FOR 2.5 min.)
7.1 WATER TIGHTNESS There should not be
any Leakage or
7.2 HYDRAULIC PRESSURE TEST 21 kgf/cm2. (FOR 2.5 min.) Sweating

7.3 FLOW TEST 900 LPM min. @ 7KGF/CM2.

8.0 MARKING PERMANENTLY MARKED

BRAND : AAAG
SIZE : 63mm
ISI : BIS MARKED

9.0 WARRANTY& GUARANTEE 12 MONTHS FROM THE DATE OF SUPPLY

00 For Approval GS DYP 13.05.2024
Rev Description BY APPD DATE
DATA SHEET NO. SHEET NO.
SBJ/104/SS-IS/DS 1 OF 1 TITLE : S.S. 63mm SINGLE OUTLET LANDING VALVE
2
Shah Bhogilal Jethalal & Bros.
72, Siddhivinayak Estate, Opp. Kitchen Express, Santej – 382721.
 11

12
2
4
15
5
6
19
14 20 CHAIN GI

18 19 SPRING SS IS:6528 (SS 304)

18 CAM TOOTH SS 304 (IS: 3444 Gr. 1)
16
17 RUBBER RING RUBBER IS:937
17 16 BLANK CAP ABS
3
15 UPPER LUG SS 304 (IS: 3444 Gr. 1)
14 LOWER LUG SS 304 (IS: 3444 Gr. 1)
13 FEMALE OUTLET SS 304 (IS: 3444 Gr. 1)

1 12 HAND WHEEL CI. IS:210 FG 200

11 HEX. NUT M.S.
13 10 SEAT CHECK NUT SS 304 (IS: 3444 Gr. 1)
7 9 STOP VALVE SS 304 (IS: 3444 Gr. 1)
20
9 8 SEAT WASHER RUBBER IS:937
8 7 CHECK NUT(SPINDLE) SS 304 (IS: 3444 Gr. 1)
6 GLAND NUT SS 304 (IS: 3444 Gr. 1)
10
5 GLAND PACKING ASBESTOSE ROPE SS
4 GLAND BUSH 304 (IS: 3444 Gr. 1) SS
3 BONNET 304 (IS: 3444 Gr. 1) SS
2 SPINDLE IS:6603 (SS 304)
1 BODY SS 304 (IS: 3444 Gr. 1)

NO. DESCRIPTION MATERIAL

PART LIST
DRAWN BY: CHECKED BY: SCALE:
TOL. WHERE NOT SPECIFIED ±5mm ALL DIM. ARE IN M.M.
M.S.PANCHAL M.M.SHAH N.T.S
HYDRAULIC TEST :
TITLE:
SEAT TIGHTNESS : 14KGF/CM2. (FOR 2.5 MINIUTES) Shah Bhogilal
BODY : 21KGF/CM2. (FOR 2.5 MINIUTES) Jethalal & Bros. DRG. NO. DATE:
REV. 00
SPECN.
IS:5290
FLOW TEST
72, SIDDHI VINAYAK ESTATE, SANTEJ - 382721. SBJ/104/SS 13.05.2024 Type-A
: 900 LPM MIN @ 7KGF/CM2.
NOTE : DUE TO OUR POLICY OF CONTINUOUS IMPROVEMENT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE