Specification
Construction Tests and Ratings
Maximum Conductor Resistance to Extreme Resistance to Resistance to Ozone Resistance to Water
Temperature120OC Temperatures Minimum: Ultraviolet IEC 60811-2-1 Absorption
IEC 60216 40OC IEC 60811-1-4 Rays (UV) UL 1581 IEC 60811-1-3
Design Life Impact Resistance Abrasion Resistance Tear Resistance
Time 30 Years IEC 60811-1-4 EN 50305 IEC 61034-2
IEC 60216
Environment Halogen Free Low Corrosive Low Smoke Opacity Non Fire
Friendly IEC 60754-1 Gas Emission IEC EN 61034-2 Propagation
IEC 60754-2 IEC 60332-2
FEATURES
Chemical Features:
• Weather and UV resistant
• Resistant to mineral oils
• Resistant to acids & alkalis
Thermal Features:
• Ambient Temperature: -40°C ~ +90°C
• Maximum Temperature at Conductor: 120°C (20000h)
• Short Circuit Temperature: 200°C at conductor (max. 5 sec)
• Thermal Endurance Test: According to EN 60216-2 (temperature index +120°C)
• High Temperature Pressure: Test according to EN 60811-3-1
• Damp Heat Test: According to EN 60068-2-78, 1000 hrs. at 90°C with 85% humidity
Electrical Features:
• Rated Voltage: 0.6/1 kV AC
• Rated DC Voltage: 1.5 kV
• Maximum Permitted DC Voltage: 1.8 kV (conductor / conductor,
non earthed system, circuit not under load)
• Maximum Permitted AC Voltage: 0.7/1.2 kV (Uo/U)
• Working Voltage: DC 1000 V
• Insulation Resistance: 1000 MΩ/KM
• Spark Test: 6000 VAC (8400 VDC)
• Voltage Withstand: 6500 V as per EN50395 for 5 min
• Ampacity: According to requirements for cables for PV systems
Mechanical Features:
• Resistant to impact, tear and abrasion
• Minimum bending radius is 4 times the diameter
• Safe pulling force - 50 N/sqmm
• Mineral oil resistance will be according to EN 60811-2-1
• Ozone resistance will be according to EN 50396 part 8.1.3
• Weathering-UV Resistance: according to HD 605/A1 or DIN 53367
• Ammonia resistance is done for 30 days in saturated ammonia atmosphere (internal testing)
KEI/SC/QCL/101 REV-02
• Very good resistance to oil and chemicals
• Acidic & alkaline resistance will be according to EN 60811-2-1 (Oxal acid and sodium hydroxide)
