FASHION AND DESIGN LEVEL 4
FAS /CU/FD/CR/02/4/A
GARMENT SKETCHING AND CONSTRUCTION LEVEL 4
MARCH /APRIL 2024
Time: 2 HOURS
TVET CURRICULUM DEVELOPMENT, ASSESSMENT AND CERTIFICATION
COUNCIL (TVET CDACC)
ANSWER ALL QUESTIONS.
1.Which one of the following is NOT one of the workshop rules. (1 mark)
A .When in doubt ask the teacher.
B. Operate the machine only with permission.
C. Eat in the workshop.
D. When operating the machine do not be careless.
2. The following are tools for drafting ,which one is NOT. (1 mark)
A. Tape measure
B. Charts
C. French curves
D .Metre ruler
3.Which one is NOT a class of fire (1 mark)
A .Class Z fires
B. Class A fires
C. Class B fires
D. Class C fires
4.Which one of the following items is contained in the First Aid kit. (1 mark)
A. White chalk
B. Sharpener
C .Pencil
D. Alcohol free cleansing wounds.
5. which ONE of the following is not a personal protective equipment. (1 mark)
A Shade required
B .Face masks
C. Dust coat
D. Gloves
6.Which one of the following is the benefit of personal protective equipment in garment industry
(1 mark)
A. Protects your body from harm
B .Enhance injury
C. Proper training
D .None of the above
7.Which one of the following materials is not used when designing a garment (1mark)
A. Pencil
B .Crayon
C. Tweezer
D. Charcoal
8.The following are types of workshop accidents which one is NOT (1mark)
A .Falls
B .Electric shock
C .Tree falling
D. Fire outbreak
9.When taking skirt measurement which part of the body is not recorded ( 1 mark).
A .Waist
B. Hips
C .Chest
D .Full length
10. Which one is NOT a design detail (1 mark)
A. Frills
B. Pockets
C .Neckline
D. Gathers
SECTION B
11.You have been employed in a garment making workshop in the cutting section,List FIVE
pattern instructions that will help you in cutting out.
Use sharp shears or a rotary cutter to cut out your pattern pieces. Never use pinking shears.
Pattern pieces cannot be cut out accurately with pinking shears. Do not allow the fabric to hang
over the edge of the table when you are cutting. (5 marks)
12,Highlight FIVE factors to consider when taking the body measurements . When taking
your clients body measurements
Use a tape measure that doesn't stretch. ...
Don't measure over bulky clothes. ...
Don't pull the tape measure too tight. ...
Try not to take your own measurements. ...
Tie a ribbon around the natural waistline. ...
Keep the tape measure parallel to the ground. ...
Record the number
Be sure to stand comfortably (as you normally do), don't try to suck in your waist or pull the
measuring tape too tight. Make sure the measuring tape is level and measuring the fullest part of
your chest/bust, waist and hips. (5 marks)
13.As a fashion designer, Outline figure faults likely to be encountered while
constructing client’s garments Square Shoulders
Sloping Shoulder
Narrow Shoulders
Wide Shoulders
Large Bust
Small Bust
Large Upper Bust
Hollow Chest
Pigeon Chest
Rounded Back
Bottle Neck
Small Waist
Large Hips
Narrow Hips
Large Upper Arms
Forward Sloping Shoulders
High Rounded Stomach
Sway Back
( 5 marks)
14. Identify FIVE positions that you can move a dart
There are three dart manipulation techniques in flat patterns. These are suitable for manipulate
dart to any location. The slash and spread or pivot method mostly use to transfer darts to the bust,
neck, armhole or anywhere you want! Pin and pivotal dart transfer technique.
(5 marks)
15. Explain the functions of the following tools as used in laying (4 marks)
i) Tape measure
ii) Pins
16 i) With illustrations sketch six types of skirts (12 marks)
ii) Outline FOUR safety measures in the workshop (4 marks)
Read the operator's manual and observe all safety precautions for all equipment.
Protect yourself from electric shock. ...
Keep all guards and shields in place.
Give the task your full attention.
Let each tool work at its own speed; do not force it.
Always wear appropriate personal protective clothing.
