Diaphragm Valve,

Metal

Construction
The GEMÜ 601, 612 and 673 manually operated diaphragm valves have a
temperature resistant plastic handwheel, GEMÜ 602 has a stainless steel GEMÜ 601
handwheel. Bonnet and internals are made all of stainless steel.
An integral optical position indicator and a seal adjuster to increase service
life of the diaphragm are included as standard.

Features
• Suitable for inert and corrosive* liquid and gaseous media
• Chemical resistance of bonnet
• CIP/SIP cleaning and sterilizing capabilities
• Autoclave capability
GEMÜ 602
• Insensitive to particulate media
• Valve body and diaphragm available in various materials and designs
• Compact design (ideal when space is at a premium)
• Stepless minimum flow regulation due to seal adjuster

Advantages
• Hermetic separation between medium and actuator
• Optional flow direction
• Installation for an optimized draining is possible
• Long service life of the diaphragm due to patented seal adjuster
(US-Pat. 5 377 956)
• Valve body also available in multi-port designs (M-block and T-body) or
as tank bottom valve body

*see information on working medium on page 2

GEMÜ 612

Sectional drawing

GEMÜ 601

GEMÜ 673

GEMÜ 612

601, 602, 612, 673

 Technical data

Working medium
Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and chemical properties of the body
and diaphragm material.

Temperatures
Media temperature
FKM (Code 4/4A) -10 ... 90 °C
EPDM (Code 13/3A) -10 ... 100 °C
EPDM (Code 17) -10 ... 100 °C
EPDM (Code 19) -10 ... 100 °C
PTFE/EPDM (Code 54) -10 ... 100 °C
PTFE/EPDM (Code 5M) -10 ... 100 °C
PTFE/PVDF/EPDM (Code 71) -10 ... 100 °C
Sterilisation temperature (1)

FKM (Code 4/4A) not applicable

EPDM (Code 13/3A) max. 150 °C (2), max. 60 min per cycle
EPDM (Code 17) max. 150 °C (2), max. 180 min per cycle
EPDM (Code 19) max. 150 °C (2), max. 180 min per cycle
PTFE/EPDM (Code 54) max. 150 °C (2), no time limit per cycle
PTFE/EPDM (Code 5M) max. 150 °C (2), no time limit per cycle
PTFE/PVDF/EPDM (Code 71) not applicable
¹ The sterilisation temperature is valid for steam (saturated steam) or superheated water.
² If the sterilisation temperatures listed above are applied to the EPDM diaphragms for longer periods of time,
the service life of the diaphragms will be reduced. In these cases, maintenance cycles must be adapted accordingly. Steam input
This also applies to PTFE diaphragms exposed to high temperature fluctuations.
PTFE diaphragms can also be used as steam barriers; however, this will reduce their service life.
The maintenance cycles must be adapted accordingly. Process pipe
GEMÜ 555 and 505 globe valves are particularly suitable for use in the area of steam generation and distribution.
The following valve arrangement for interfaces between steam pipes and process pipes has proven itself over time: Steam distribution    Sterile process
A globe valve for shutting off steam pipes and a diaphragm valve as an interface to the process pipes.

Ambient temperature 0 ... 60 °C

Operating pressure [bar]

EPDM / FKM PTFE
Diaphragm Nominal All valve body Forged Investment cast or
Type
size size materials body cast iron body
GEMÜ 601/602 8 DN 4 - 15 0 - 10 0 - 10 0-6
GEMÜ
10 DN 10 - 20 0 - 10 0 - 10 0-6
612
25 DN 15 - 25 0 - 10 0 - 10 0-6
GEMÜ
40 DN 32 - 40 0 - 10 0 - 10 0-6
673
50 DN 50 - 65 0 - 10 0 - 10 0-6
All pressures are gauge pressures. Operating pressure values were determined with static operating pressure applied on one side of a closed
valve. Sealing at the valve seat and atmospheric sealing is ensured for the given values. Information on operating pressures applied on both
sides and for high purity media on request.

601, 602, 612, 673

2
 Technical data

Kv values [m³/h]
Pipe DIN EN 10357 EN 10357 DIN 11850 SMS ASME BPE / ISO 1127 / DIN ISO
standard series B series A Series 3 3008 DIN 11866 EN 10357 228
(formerly (formerly series C series C /
DIN 11850 DIN 11850 DIN 11866
series 1) series 2) / series B
DIN 11866
series A
Connection
0 16 17 18 37 59 60 1
code
Type MG DN
4 0.5 - - - - - - -
6 - - 1.1 - - - 1.2 -
GEMÜ
8 8 - - 1.3 - - 0.6 2.2 1.4
601/602
10 - 2.1 2.1 2.1 - 1.3 - -
15 - - - - - 2.0 - -
10 - 2.4 2.4 2.4 - 2.2 3.3 -
GEMÜ 12 - - - - - - - 3.2
10
612 15 3.3 3.8 3.8 3.8 - 2.2 4.0 3.4
20 - - - - - 3.8 - -
15 4.1 4.7 4,7 4.7 - - 7.4 6.5
25 20 6.3 7.0 7.0 7.0 - 4.4 13.2 10.0
25 13.9 15.0 15.0 15.0 12.6 12.2 16.2 14.0
GEMÜ
32 25.3 27.0 27.0 27.0 26.2 - 30.0 26.0
673 40
40 29.3 30.9 30.9 30.9 30.2 29.5 32.8 33.0
50 46.5 48.4 48.4 48.4 51.7 50.6 55.2 60.0
50
65 - - - - 62.2 61.8 - -
MG = diaphragm size
Kv values determined acc. to DIN EN 60534, inlet pressure 5 bar, ∆p 1 bar, stainless steel valve body (forged body) and soft elastomer diaphragm.
The Kv values for other product configurations (e.g. other diaphragm or body materials) may differ. In general, all diaphragms are subject to
the influences of pressure, temperature, the process and their tightening torques. Therefore the Kv values may exceed the tolerance limits of
the standard.
The Kv value curve (Kv value dependent on valve stroke) can vary depending on the diaphragm material and duration of use.

601, 602, 612, 673

3
 Order data

Valve type Code Valve body material Code

GEMÜ 601 diaphragm size 8 601 EN-GJS-400-18-LT (SG iron 40.3) PFA lined 17
GEMÜ 602 diaphragm size 8 stainless st. handwheel 602 EN-GJS-400-18-LT (SG iron 40.3) PP lined 18
GEMÜ 612 diaphragm size 10 612 1.4435, investment casting C3
GEMÜ 673 diaphragm size 25 - 50 673 1.4408, investment casting 37
1.4435 (316L), forged body 40
Body configuration Code 1.4435 (BN2), forged body Δ Fe<0.5% 42
Tank valve body B** 1.4539, forged body F4
2/2-way body D
T body T* Diaphragm material Code
* For dimensions see T Valves brochure
FKM 4 4A*
** Dimensions and versions on request
EPDM 13 3A*
EPDM 17
Connection Code
EPDM 19
Butt weld spigots
Spigots DIN 0 PTFE/EPDM, one-piece 54
Spigots EN 10357 series B PTFE/EPDM, two-piece 5M**
(formerly DIN 11850 series 1) 16 PTFE/PVDF/EPDM, three-piece 71***
Spigot EN 10357 series A
(formerly DIN 11850 series 2) / DIN 11866 series A 17 * for diaphragm size 8
Spigots DIN 11850 series 3 18 ** Code 5M available from diaphragm size 25
Spigots JIS-G 3447 35 *** Code 71 only available for bodies with PFA lining (code 17)
Spigots JIS-G 3459 36
Material complies with FDA requirements, except codes 4 and 4A
Spigots SMS 3008 37
Spigots BS 4825 Part 1 55
Spigot ASME BPE / DIN 11866 series C 59 Control function Code
Spigot ISO 1127 / EN 10357 series C /
DIN 11866 series B 60 Manually operated 0
Spigots ANSI/ASME B36.19M Schedule 10s 63
Spigots ANSI/ASME B36.19M Schedule 15s 64
Spigots ANSI/ASME B36.19M Schedule 40s 65
Bonnet version Code
Threaded connections With seal adjuster, black handwheel
Threaded sockets DIN ISO 228 1 GEMÜ 601    diaphragm size 8 0TS
Threaded spigots DIN 11851 6 With seal adjuster, metal handwheel
Cone spigot and union nut DIN 11851 6K GEMÜ 602    diaphragm size 8 0TM
Aseptic unions on request With seal adjuster, black handwheel
Flanges GEMÜ 612    diaphragm size 10 1TS
Flanges EN 1092 / PN16 / form B, With seal adjuster, black handwheel
length EN 558, series 1, GEMÜ 673    diaphragm size 25 2TS
ISO 5752, basic series 1 8 With seal adjuster, black handwheel
Flanges ANSI Class 150 RF, length MSS SP-88 38 GEMÜ 673    diaphragm size 40 3TS
Flanges ANSI Class 125/150 RF,
length EN 558, series 1, ISO 5752, basic series 1 39 With seal adjuster, black handwheel
GEMÜ 673    diaphragm size 50 4TS
Clamp connections
Clamps ASME BPE for pipe ASME BPE,
length ASME BPE 80
Clamps DIN 32676 series B for pipe EN ISO 1127,
length EN 558, series 7 82
Clamps ASME BPE for pipe ASME BPE,
length EN 558, series 7 88
Clamps DIN 32676 series A for pipe DIN 11850,
length EN 558, series 7 8A
Clamps SMS 3017 for pipe SMS 3008,
length EN 558, series 7 8E
Clamps DIN 32676 series C,
length FTF ASME BPE 8P
Clamps DIN 32676 series C,
length FTF EN 558 series 7 8T
Aseptic clamps on request
For overview of available valve bodies see page 15/16

601, 602, 612, 673

4
 Order data

Internal surface finishes for forged and block material bodies 1

Mechanically polished 2 Electropolished

Readings for Process
Contact Surfaces Hygienic class Hygienic class
Code Code
DIN 11866 DIN 11866
Ra ≤ 0.80 μm H3 1502 HE3 1503
Ra ≤ 0.60 μm - 1507 - 1508
Ra ≤ 0.40 μm H4 1536 HE4 1537
Ra ≤ 0.25 μm 3 H5 1527 HE5 1516

Mechanically polished 2 Electropolished

Readings for Process
Contact Surfaces acc. to ASME BPE ASME BPE
ASME BPE 2016 4 Surface Code Surface Code
Designation Designation
Ra Max. = 0.76 μm (30 μinch) SF3 SF3 - -
Ra Max. = 0.64 μm (25 μinch) SF2 SF2 SF6 SF6
Ra Max. = 0.51 μm (20 μinch) SF1 SF1 SF5 SF5
Ra Max. = 0.38 μm (15 μinch) - - SF4 SF4

Internal surface finishes for investment cast bodies

Mechanically polished 2
Readings for Process
Contact Surfaces Hygienic class
Code
DIN 11866
Ra ≤ 6.30 μm - 1500
Ra ≤ 0.80 μm H3 1502
Ra ≤ 0.60 μm 5 - 1507

1 Surface finishes of customized valve bodies may be limited in special cases.

2 Or any other finishing method that meets the Ra value (acc. to ASME BPE).
3 The smallest possible Ra finish for pipe connections with an internal pipe diameter < 6 mm is 0.38 µm.
4 When using these surfaces, the bodies are marked according to the specifications of ASME BPE.
The surfaces are only available for valve bodies which are made of materials (e.g. GEMÜ material codes 40, 41, F4, 44)
and use connections (e.g. GEMÜ connection codes 59, 80, 88) according to ASME BPE.
5 Not possible for GEMÜ connection code 59, DN 8 and GEMÜ connection code 0, DN 4.

Ra acc. to DIN EN ISO 4288 and ASME B46.1

601, 602, 612, 673

5
 Order data

Special function Code

3-A compliant design M

Order example 601 8 D 60 C3 54 0 0TS 1500 M

Type 601
Nominal size 8
Body configuration (code) D
Connection (code) 60
Valve body material (code) C3
Diaphragm material (code) 54
Control function (code) 0
Bonnet version (code) 0TS
Surface finish (code) 1500
Special function (code) M

601, 602, 612, 673

6
 Dimensions [mm]

Bonnet dimensions
Type Diaphragm size A ∅B Weight [kg]
GEMÜ 601 8 58 32 0.10
GEMÜ 602 8 54 32 0.15
GEMÜ 612 10 80 60 0.40
25 102 90 0.70
GEMÜ 673 40 119 114 1.30
50 136 140 2.05

GEMÜ 601 / 602

øB
øB
A

CT*

A
CT*

GEMÜ 601 GEMÜ 602

GEMÜ 612 / 673

B
CT*

* CT = A + H1 (see body dimensions)

601, 602, 612, 673

7
 Body dimensions [mm]

Butt weld spigots, connection code 0, 16, 17, 18

Valve body material: Investment casting (code C3), forged body (code 40, F4)
Pipe standard DIN EN 10357 EN 10357 DIN 11850 Weight
series B series A Series 3 [kg]
(formerly (formerly
DIN 11850 DIN 11850
series 1) series 2) /
DIN 11866
series A
Connection code 0 16 17 18
Type MG DN NPS L c (min) H1* H1** ød s ød s ød s ød s
4 - 72 20 8.5 6 1.0 - - - - - - 0.09
GEMÜ 6 - 72 20 8.5 - - - - 8 1.0 - - 0.09
8
601, 602 8 1/4” 72 20 8.5 - - - - 10 1.0 - - 0.09
10 3/8” 72 20 8.5 - - 12 1.0 13 1.5 14 2.0 0.09
GEMÜ 10 3/8” 108 25 12.5 - - 12 1.0 13 1.5 14 2.0 0.30
10
612 15 1/2” 108 25 12.5 18 1.5 18 1.0 19 1.5 20 2.0 0.30
15 1/2” 120 25 13.0 19.0 18 1.5 18 1.0 19 1.5 20 2.0 0.62
25 20 3/4” 120 25 16.0 19.0 22 1.5 22 1.0 23 1.5 24 2.0 0.58
GEMÜ 25 1” 120 25 19.0 19.0 28 1.5 28 1.0 29 1.5 30 2.0 0.55
673 32 1 1/4” 153 25 24.0 26.0 34 1.5 34 1.0 35 1.5 36 2.0 1.45
40
40 1 1/2” 153 30.5 26.0 26.0 40 1.5 40 1.0 41 1.5 42 2.0 1.32
50 50 2” 173 30 32.0 32.0 52 1.5 52 1.0 53 1.5 54 2.0 2.25
* only for investment cast design    ** only for forged design    MG = diaphragm size
For materials see overview on page 14

Butt weld spigots, connection code 60

Valve body material: Investment casting (code C3), forged body (code 40, F4)
Pipe standard ISO 1127 / Weight
EN 10357 series C / [kg]
DIN 11866 series B
Connection code 60
Type MG DN NPS L c (min) H1* H1** ød s
6 - 72 20 - 8.5 10.2 1.6 0.09
GEMÜ
8 8 1/4” 72 20 8.5 8.5 13.5 1.6 0.09
601. 602
10 3/8” 72 20 - 8.5 - - 0.09
GEMÜ 10 3/8” 108 25 12.5 12.5 17.2 1.6 0.30
10
612 15 1/2” 108 25 12.5 12.5 21.3 1.6 0.30
15 1/2” 120 25 13.0 19.0 21.3 1.6 0.62
25 20 3/4” 120 25 16.0 19.0 26.9 1.6 0.58
GEMÜ 25 1” 120 25 19.0 19.0 33.7 2.0 0.55
673 32 1 1/4” 153 25 24.0 26.0 42.4 2.0 1.45
40
40 1 1/2” 153 30.5 26.0 26.0 48.3 2.0 1.32
50 50 2” 173 30 32.0 32.0 60.3 2.0 2.25
* only for investment cast design    ** only for forged design    MG = diaphragm size
For materials see overview on page 14

601, 602, 612, 673

8
 Body dimensions [mm]

Butt weld spigots, connection code 35, 36, 37

Valve body material: Investment casting (code C3), forged body (code 40, F4)
Pipe standard JIS-G JIS-G SMS Weight
3447 3459 3008 [kg]
Connection code 35 36 37
Type MG DN NPS L c (min) H1* H1** ød s ød s ød s
GEMÜ 601, 6 - 72 20 - 8.5 - - 10.5 1.20 - - 0.09
8
602 8 1/4” 72 20 - 8.5 - - 13.8 1.65 - - 0.09
10 3/8” 108 25 - 12.5 - - 17.3 1.65 - - 0.30
GEMÜ 612 10
15 1/2” 108 25 - 12.5 - - 21.7 2.10 - - 0.30
15 1/2” 120 25 - 19.0 - - 21.7 2.10 - - 0.62
25 20 3/4” 120 25 - 19.0 - - 27.2 2.10 - - 0.58
25 1” 120 25 19.0 19.0 25.4 1.2 34.0 2.80 25.0 1.2 0.55
GEMÜ 673 32 1 1/4” 153 25 - 26.0 31.8 1.2 42.7 2.80 33.7 1.2 1.45
40
40 1 1/2” 153 30,5 26.0 26.0 38.1 1.2 48.6 2.80 38.0 1.2 1.32
50 2” 173 30 32.0 32.0 50.8 1.5 60.5 2.80 51.0 1.2 2.25
50
65 2 1/2” 173 30 - 34.0 63.5 2.0 - - 63.5 1.6 2.20
* only for investment cast design    ** only for forged design    MG = diaphragm size
For materials see overview on page 14

Butt weld spigots. connection code 55. 59. 63. 64. 65

Valve body material: Investment casting (code C3). forged body (code 40. F4)
Pipe standard BS 4825 ASME BPE / ANSI/ASME ANSI/ASME ANSI/ASME Weight
Part 1 DIN 11866 B36.19M B36.19M B36.19M [kg]
series C Schedule Schedule Schedule
10s 5s 40s
Connection code 55 59 63 64 65
c
Type MG DN NPS L H1* H1** ød s ød s ød s ød s ød s
(min)
6 - 72 20 - 8.5 - - - - 10.3 1.24 - - 10.3 1.73 0.09
GEMÜ 8 1/4” 72 20 8.5 8.5 6.35 1.2 6.35 0.89 13.7 1.65 - - 13.7 2.24 0.09
8
601. 602 10 3/8” 72 20 8.5 8.5 9.53 1.2 9.53 0.89 - - - - - - 0.09
15 1/2” 72 20 8.5 8.5 12.70 1.2 12.70 1.65 - - - - - - 0.09
10 3/8” 108 25 - 12.5 9.53 1.2 9.53 0.89 17.1 1.65 - - 17.1 2.31 0.30
GEMÜ
10 15 1/2” 108 25 - 12.5 12.70 1.2 12.70 1.65 21.3 2.11 21.3 1.65 21.3 2.77 0.30
612
20 3/4” 108 25 12.5 12.5 19.05 1.2 19.05 1.65 - - - - - - 0.30
15 1/2” 120 25 - 19.0 - - - - 21.3 2.11 21.3 1.65 21.3 2.77 0.62
25 20 3/4” 120 25 16.0 19.0 19.05 1.2 19.05 1.65 26.7 2.11 26.7 1.65 26.7 2.87 0.58
25 1” 120 25 19.0 19.0 - - 25.40 1.65 33.4 2.77 33.4 1.65 33.4 3.38 0.55
GEMÜ
32 1 1/4” 153 25 - 26.0 - - - - 42.2 2.77 42.2 1.65 42.2 3.56 1.45
673 40
40 1 1/2” 153 30.5 26.0 26.0 - - 38.10 1.65 48.3 2.77 48.3 1.65 48.3 3.68 1.32
50 2” 173 30 32.0 32.0 - - 50.80 1.65 60.3 2.77 60.3 1.65 60.3 3.91 2.25
50
65 2 1/2” 173 30 - 34.0 - - 63.50 1.65 - - - - - - 2.10
* only for investment cast design    ** only for forged design    MG = diaphragm size
For materials see overview on page 14

601, 602, 612, 673

9
 Body dimensions [mm]

Threaded sockets, connection code 1

valve body material: investment casting (code 37)
Number of Weight
Type MG DN R H H1 t L SW2 flats [kg]
GEMÜ
8 8 G 1/4 19,0 9.0 11 72 18 6 0,09
601/602
GEMÜ 12 G 3/8 25,0 13.0 12 55 22 2 0,17
10
612 15 G 1/2 30,0 15.0 15 68 27 2 0,26
15 G 1/2 28,3 14.8 15 85 27 6 0,32
25 20 G 3/4 33,3 17.3 16 85 32 6 0,34
GEMÜ 25 G1 42,3 21.8 13 110 41 6 0,39
673 32 G 11/4 51,3 26.3 20 120 50 8 0,88
40
40 G 11/2 56,3 28.8 18 140 55 8 0,93
50 50 G2 71,3 36.3 26 165 70 8 1,56
MG = Diaphragm size   
H1

R
H

SW2

t
L

601, 602, 612, 673 10

 Body dimensions [mm]

Threaded connections, connection code 6

Valve body material: Forged body (code 40)
Thread to DIN 405 Weight
Type MG DN H1 ød1 L
R [kg]
GEMÜ
8 10 8.5 10.0 RD 28 x 1/8 92 0.21
601/602
GEMÜ 10 12.5 10.0 RD 28 x 1/8 118 0.33
10
612 15 12.5 16.0 RD 34 x 1/8 118 0.35
15 19.0 16.0 RD 34 x 1/8 118 0.71
25 20 19.0 20.0 RD 44 x 1/6 118 0.78
GEMÜ 25 19.0 26.0 RD 52 x 1/6 128 0.79
673 32 26.0 32.0 RD 58 x 1/6 147 1.66
40
40 26.0 38.0 RD 65 x 1/6 160 1.62
50 50 32.0 50.0 RD 78 x 1/6 191 2.70
MG = Diaphragm size
H1

d1
R
L

Cone spigot, connection code 6K

Valve body material: Forged body (code 40)
Thread to DIN 405 Weight
Type MG DN H1 ød1 L
R [kg]
GEMÜ
8 10 8.5 10.0 RD 28 x 1/8 90 0.21
601/602
GEMÜ 10 12.5 10.0 RD 28 x 1/8 116 0.33
10
612 15 12.5 16.0 RD 34 x 1/8 116 0.35
15 19.0 16.0 RD 34 x 1/8 116 0.71
25 20 19.0 20.0 RD 44 x 1/6 114 0.78
GEMÜ 25 19.0 26.0 RD 52 x 1/6 127 0.79
673 32 26.0 32.0 RD 58 x 1/6 147 1.66
40
40 26.0 38.0 RD 65 x 1/6 160 1.62
50 50 32.0 50.0 RD 78 x 1/6 191 2.70
MG = Diaphragm size
H1
ød1
R

11
601, 602, 612, 673
 Body dimensions [mm]

Flanges - DIN EN 1092, connection code 8

Valve body material GGG 40.3 (code 17, 18), investment casting (code C3),
forged body (code 40)
H1
Number Weight
Type MG DN øD øk øL Material Material Material FTF
of bolts [kg]
code 17, 18 code C3 code 40

15 95 65 14 4 18.0 13.0 19.0 130* 1.85

25 20 105 75 14 4 20.5 16.0 19.0 150 2.35
GEMÜ 673

25 115 85 14 4 23.0 19.0 19.0 160 2.85

32 140 100 19 4 28.7 24.0 26.0 180 4.90
40
40 150 110 19 4 33.0 26.0 26.0 200 5.65
50 50 165 125 19 4 39.0 32.0 32.0 230 7.45
*Material code C3, 40 FTF = 150 (no DIN length)
MG = diaphragm size    For materials see overview on page 14

Flanges - ANSI Class 125/150 RF, connection code 38, 39

Valve body material GGG 40.3 (code 17, 18), investment casting (code C3),
forged body (code 40)
H1 FTF
Number Weight
Type MG DN øD øk øL Material Material Material Connection Connection
of bolts [kg]
code 17, 18 code C3 code 40 code 38 code 39

15 90 60.3 15.9 4 18.0 13.0 19.0 - 130* 1.85

25 20 100 69.9 15.9 4 20.5 16.0 19.0 146 150 2.35
GEMÜ 673

25 110 79.4 15.9 4 23.0 19.0 19.0 146 160 2.85

32 115 88.9 15.9 4 28.7 24.0 26.0 - 180 4.90
40
40 125 98.4 15.9 4 33.0 26.0 26.0 175 200 5.65
50 50 150 120.7 19.0 4 39.0 32.0 32.0 200 230 7.45
*Material code C3, 40 FTF = 150 (no DIN length)
MG = diaphragm size    For materials see overview on page 14

L
H1

D
k

FTF

601, 602, 612, 673 12

 Body dimensions [mm]

Clamp connections, connection code 80, 82, 88, 8A, 8E, 8P, 8T
Valve body material: Forged body (code 40, F4)
Pipe connection ASME BPE ISO 1127 / EN 10357 EN 10357 series A SMS 3008 Weight
for clamp series C / (formerly DIN 11850 [kg]
DIN 11866 series B series 2) /
DIN 11866 series A
Clamp connection Code 80, 88 - ASME BPE DIN 32676 series B DIN 32676 series A ISO 2852 / SMS 3017
Code 8P, 8T - DIN 32676 series C
Clamp connection code 80, 8P 88, 8T 82 8A 8E
Type MG DN NPS H1 ød1 ød3 L ød1 ød3 L ød1 ød3 L ød1 ød3 L ød1 ød3 L
6 1/8 ” 8.5 - - - - - - 7.0 25.0 63.5 6 25.0 63.5 - - - -
601/602

8 1/4” 8.5 4.57 25.0 63.5 - - - 10.3 25.0 63.5 8 25.0 63.5 - - - 0.15
GEMÜ

8
10 3/8” 8.5 7.75 25.0 63.5 - - - - - - 10 34.0 88.9 - - - 0.18
15 1/2” 8.5 9.40 25.0 63.5 9.40 25.0 108 - - - - - - - - - 0.18
10 3/8” 12.5 - - - - - - 14.0 25.0 108.0 10 34.0 108.0 - - - 0.30
GEMÜ

10 15 1/2” 12.5 9.40 25.0 88.9 9.40 25.0 108 18.1 50.5 108.0 16 34.0 108.0 - - - 0.43
612

20 3/4” 12.5 15.75 25.0 101.6 15.75 25.0 117 - - - - - - - - - 0.43

15 1/2” 19.0 - - - - - - 18.1 50.5 108.0 16 34.0 108.0 - - - 0.75
25 20 3/4” 19.0 15.75 25.0 101.6 15.75 25.0 117 23.7 50.5 117.0 20 34.0 117.0 - - - 0.71
25 1” 19.0 22.10 50.5 114.3 22.10 50.5 127 29.7 50.5 127.0 26 50.5 127.0 22.6 50.5 127 0.63
GEMÜ

32 1 1/4” 26.0 - - - - - - 38.4 64.0 146.0 32 50.5 146.0 31.3 50.5 146 1.62
673

40
40 1 1/2” 26.0 34.80 50.5 139.7 34.80 50.5 159 44.3 64.0 159.0 38 50.5 159.0 35.6 50.5 159 1.50
50 2” 32.0 47.50 64.0 158.8 47.50 64.0 190 56.3 77.5 190.0 50 64.0 190.0 48.6 64.0 190 2.50
50
65 2 1/2” 34.0 60.20 77.5 193.8 60.20 77.5 216 - - - - - - 60.3 77.5 216 2.30
MG = diaphragm size
H1

ød1
ød3

13
601, 602, 612, 673
 Overview of valve bodies for GEMÜ 601, 602, 612, 673

Spigots
Connection
0 16 17 18 35 36 37 55 59 60 63 64 65
code

All rights including copyright and industrial

property rights are expressly reserved.
Type

Material
C3 40 40 C3 40 40 40 40 C3 40 40 C3 40 C3 40 40 40 40
code
MG DN
4 X X - - - - - - - - - - - - - - - -
6 - - - X X - - X - - - - - - X X - X
601/602
GEMÜ

8 8 - - - X X - - X - - X X X X X X - X
10 - - X X X X - - - - X X X - - - - -
15 - - - - - - - - - - X X X - - - - -
10 - - X X X X - X - - X - X X X X - X
GEMÜ
612

10 15 - X X X X X - X - - X - X X X X X X
20 - - - - - - - - - - X X X - - - - -
15 - X X X X X - X - - - - - X X X X X
25 20 - X X X X X - X - - X X X X X X X X
25 - X X X X X X X X X - X X X X X X X
GEMÜ

32 - X X X X X X X - X - - - X X X X X
673

40
40 - X X X X X X X X X - X X X X X X X
50 - X X X X X X X X X - X X X X X X X
50

Should there be any doubts or misunderstandings, the German

65 - - - - - - X - - X - - X - - - - -

version of this data sheet is the authoritative document!

Availability of material code 42, F4: same as code 40    MG = diaphragm size

Threaded Flanges
connec- Clamps
tions
Connection 6, 80, 88,
1 82 8A 8E 8 38 39
code 6K 8P 8T
Type

Material
37 40 40 40 40 40 40 17 18 C3 40 17 18 17 18 C3 40
code
MG DN
6 - - - K - K - - - - - - - - - - -
601/602

8 X - K K - K - - - - - - - - - - -
GEMÜ

8
10 - W K - - W - - - - - - - - - - -
15 - - K - W - - - - - - - - - - - -
10 - W - K - K - - - - - - - - - - -
GEMÜ
612

10 15 X W K W K K - - - - - - - - - - -
20 - - K - K - - - - - - - - - - - -
15 X W - W - K - X X W W - - X X W W
25 20 X W K K K K - X X W W X X* X X W W
25 X W K K K K K X X W W X X* X X W W
GEMÜ

32 X W - W - K K X X W W - - X X W W
673

40
Subject to alteration · 02/2024 · 88318767

40 X W K W K K K X X W W X X* X X W W
50 X W K W K K K X X W W X X* X X W W
50
65 - - W - W - W - - - - - - - - - -
* Connection code 38 / material code 18 on request
X = Standard    K = Connections completely machined (not welded)   W = Welded construction
Availability of material code 42, F4: same as code 40   MG = diaphragm size

For further metal diaphragm valves, accessories and other products,

please see our Product Range catalogue and Price List. Contact GEMÜ.

VALVES, MEASUREMENT
AND CONTROL SYSTEMS

GEMÜ Gebr.Müller · Apparatebau GmbH & Co.KG · Fritz-Müller-Str. 6-8 · D-74653 Ingelfingen-Criesbach · Telefon +49(0)7940/123-0 · Telefax +49(0)7940/123-192
info@gemue.de · www.gemu-group.com