Document No. PSIPL/PRD/20/00/01.01.
2018
Issue Date:- 01.01.2018
WORK INSTRUCTION FOR OPERATOR Rev. No.:- 00
PREMIER SEALS INDIA PVT LTD
Rev. Date:- ------
Purpose:- Optimum process for Part Inspection ,Marking and Packing Online
Part Name:- Part No:-
4) Now verify the parts visualy for any
defects as per ''Eye sequence chart''
5) Now mark the OK parts with
''Date'' ,''Shift'' and ''Name''
6) Now pack the parts in Clean Polythene
bags
6) Now keep the parts in the box
Prepared by : Mangesh Kawade Approved by : Sampat Thakre
Premier seals (i)
pvt. Ltd. Chakan WORK INSTRUCTION FOR OPERATOR
pune
Purpose:- Optimum process for Part Deflashing opration.
Part Name:- Induction Pipe Part No:- 1B0033
1)Before starting the process ensure
opration area 5'S And hand gloves ,
cutter, pencil and material loading
trolley if applicable avialable at work
station.
2)Take part from trolley. And part put
on the opration table.
3) Use the sharp cutter for deflashing.
Start deflashing from parting line ,
ballon cutting area, bracket and slot
inside and nipple side area.
ballon cutting area, bracket and slot
inside and nipple side area.
5) Verify the deflashing part area for
proper deflashing. & kept in WIP
trolley..
Prepared by : Pankaj pawar Approved by :
Document No. PSIPL/PU/PRD/28
Issue Date:- 18/08/2015
R OPERATOR
Rev. No.:- 00
Rev. Date:- ------
Piaggio vehicles pvt.
Customer name
Ltd.
1B003395 Rev. no & date -
oved by : Deepak kumar
Premier seals (i)
pvt. Ltd. Chakan WORK INSTRUCTION FOR OPERATOR
pune
Purpose:- Optimum process for Part Ballon cutting.
Part Name:- Induction Pipe Part No:- 1B0033
1)Before Band saw( Machine) switch ON
ensure machine area 5'S
2)Ballon cutting fixture guide at band
saw machine & take part from trolley
3)Part kept on ballon cutting fixture &
slide the fixture to band saw
cutter(blade) ensure blade touch at part
ballon groove.
cutter(blade) ensure blade touch at part
ballon groove.
5) Verify ballon cutting section area
6)Part remove from ballon fixture after
completed the operation & kept in WIP
trolley..
Prepared by : Pankaj pawar Approved by :
Document No. PSIPL/PU/PRD/28
Issue Date:- 18/08/2015
R OPERATOR
Rev. No.:- 00
Rev. Date:- ------
Piaggio vehicles pvt.
Customer name
Ltd.
1B003395 Rev. no & date -
oved by : Deepak kumar
