C USTO M C ARV ED I NTER I O R D O O R S

Bring in d i v i d u a l i t y i n t o f o c u s

DOOR: C6020, SINGLE-HIP PANEL WITH 110/112 RAISED MOULDING

Cover image DOORs: C5000,

8'0", FLAT PANEL WITH square sticking
a home is full of personal touches —things that reflect the people living there. at JEld-WEn, we create our
custom carved interior doors to do just that. in addition to our many standard designs, we can create nearly any custom
door you can imagine. these doors have a clean look and precise detailing that also makes them an excellent choice for
light commercial projects. they are available in over 100 designs and come in various styles including passage, pocket,
bifold and bypass. door sizes are 6'8" to 8'0" in height and 1'0" to 3'0" in width.

in any application, you can count on these doors to be durable, worr y-free and remarkably reliable.
our industry-leading 5-year warranty guarantees it.

to find a custom carved interior door dealer near you, please visit www.jeld-wen.com.

door: c3000, singlE-HiP PanEl WitH 110/112 raisEd Moulding

table of contents
aesthetic options .................................................... 4
design portfolio ...................................................... 6
Materials and construction ..................................... 12
standard door designs ........................................... 14
Warranty.................................................................... 23

door: c5110 douBlE-HiP

PanEl WitH og sticking
 anytHi ng for you

How do you customize these doors? first, select a door design. next, choose a panel profile. then select sticking or
raised moulding. Panel profiles, sticking and raised moulding increase visual interest, with each option providing its
own distinctive look. for example, flat panels provide a craftsman look, while raised moulding is appropriate for
colonial or victorian homes. a panel profile is the dimensional detail design of a panel; sticking refers to the detail
around the perimeter of the panel. a few examples of how you can use the options for a customized look are
shown here.

door: c5000, flat PanEl WitH og sticking

Flat Panel

flat square og 110/112 raised

sticking sticking moulding

square sticking
door: c5000, singlE-HiP PanEl WitH squarE sticking

Single Hip

square og 110/112 raised

sticking sticking moulding

single hip

og sticking

4
 AesthetIc oPtIons
customization
We’re always open to your ideas and imagination. as proof of this, we offer custom capabilities that allow you
to have nearly any design.* We also offer over 100 standard designs and assorted profile options, which allow
you to choose from thousands of distinctive combinations.

door: c5000, douBlE-HiP PanEl WitH 110/112 raisEd Moulding

Double Hip

double hip
square og 110/112 raised
sticking sticking moulding
110/112 moulding

Illustrations are
Scoop Panel
artist renderings and

for information

purposes only.
square og 110/112 raised
sticking sticking moulding Please visit
scoop www.jeld-wen.com

for architectural
square sticking
specifications.

JEld-WEn.coM 5
*Please note, doors will arrive primed, not finished or painted.
 Vari ety is captivating

We’ve brought together a sampling of Custom Carved interior doors to show you the broad range of standard styles
we offer*, as well as what’s possible with our custom capabilities. The combination of door design, panel profile and
sticking (or raised moulding) you choose will provide a unique look; for additional distinction, select door designs are
available with custom art, including company logos or text (see examples on the right).

For more information on customization, contact your local dealer.

Please note, all doors, including custom designs, come primed and will need to be painted.
*Review over 100 standard designs on pages 14–21.

DOOR: C2050, double-HIP PANEL

WITH 110/112 raised moulding
(custom one-of-a-kind carving)

6 J E LD - we n w i n d o w s & d o o r s

DOOR: C2020, Single-hip panel with OG sticking

 Design portfolio
Available type styles

Font 1: Handel Gothic

Font 2: Polka
Type measurements will be a standard 2" high for all doors.

DOOR: C2170, Double-HIP PANEL WITH 110/112 RAISED MOULDING

DOOR: C3070, Double-hip panel with OG sticking

J E LD - we n . c o m 7
DOOR: C4000, flat PANEL WITH square STICKING

8 J E LD - we n w i n d o w s & d o o r s
 DesIgn PortfolIo
door: c2040, singlE-HiP PanEl WitH og sticking

door: c5020, douBlE-HiP PanEl WitH og sticking

JEld-WEn.coM 9
door: c3100, douBlE-HiP PanEl WitH 110/112 raisEd Moulding
 DOOR: C5010, double-hip panel with OG sticking

DOOR: C5000, FLAT PANEL WITH 110/112 RAISED MOULDING

10 J E LD - we n w i n d o w s & d o o r s
 DOOR: V2020, DOUBLE-HIP PANEL WITH V-GROOVE
DESIGN AND SQUARE STICKING

Design portfolio

J E LD - we n . c o m 11
DOORs: C2020, 8'0" SINGLE-HIP PANEL WITH 110/112 raised moulding
 Smar tly built, precisely designed

Every Custom Carved interior door begins with refined medium density fiberboard (MDF) that’s carefully buffed for a
visually appealing, smooth finish. The doors feature finger-jointed pine stiles, for added durability and screw holding
strength. The door feels solid, yet it has a lightweight core that makes installation easy.

Router technology
Designs are carved into our doors with superior router
technology. This makes nearly any design possible,
while also creating an exceptionally detailed and
polished appearance.

Fire and sound ratings

Our Custom Carved interior doors offer fire protection
and superior sound reduction. Raised panel doors
come with a 20-minute fire rating option (for true
fire protection, use with certified frames and
hardware). Please check with your supplier for
availability. They also have an STC rating of up to 33.
That means the doors provide up to 50 percent more
sound reduction than a flush, hollow core door.

Bifold doors
JELD-WEN is pleased to offer a large selection of
Custom Carved bifold interior doors. So you can now
choose a matching design for all your interior doors,
whether they’re for passages, closets or smaller
spaces like laundry rooms. Size availability varies;
please see your local dealer or visit jeld-wen.com/
architecturaltoolbox for complete details.

DOOR: C4030, Double-hip panel with OG sticking

12 J E LD - we n w i n d o w s & d o o r s
 MAterIAls AnD constructIon

doors: c6000 Bifolds, douBlE-HiP PanEl WitH og sticking

JEld-WEn.coM 13
 standard door designs

C1000 C1010 C1020 C1030 C1040

C1050 C2000 C2010 C2020 C2030

C2040 C2050 C2060 C2070 C2080

14 J E LD - we n w i n d o w s & d o o r s
 C2090 C2130 C2140 C2150 C2160

C2170 C2180 C2190 C2200 C3000

C3010 C3020 C3040 C3050 C3060

For technical information, including CSI specifications and architectural drawings,

J E LD - we n . c o m 15
please visit www.jeld-wen.com/architecturaltoolbox.
 standard door designs

C3070 C3080 C3090 C3100 C3110

C3120 C3130 C3140 C3150 C3160

C3170 C3180 C3190 C3200 C3210

16 J E LD - we n w i n d o w s & d o o r s
 C3220 C3230 C3240 C3250 C3260

C3270 C3280 C3300 C3330 C4000

C4010 C4020 C4030 C4050 C4060

For technical information, including CSI specifications and architectural drawings,

J E LD - we n . c o m 17
please visit www.jeld-wen.com/architecturaltoolbox.
 standard door designs

C4070 C4080 C4090 C4100 C4120

C4130 C4140 C4150 C4160 C4170

C4180 C4190 C4400 C5000 C5010

18 J E LD - we n w i n d o w s & d o o r s
 C5020 C5030 C5040 C5050 C5060

C5070 C5080 C5090 C5100 C5110

C5300 C6000 C6010 C6020 C6030

For technical information, including CSI specifications and architectural drawings,

J E LD - we n . c o m 19
please visit www.jeld-wen.com/architecturaltoolbox.
 standard door designs

C6040 C6050 C6060 C6070 C6080

C6090 C6100 C7000 C7010 C7020

C8000 C8010 C9000 C9010 V1000

20 J E LD - we n w i n d o w s & d o o r s
 V1030

V2020

V2030

DOORs: C5000, Flat PANEL WITH square sticking

For technical information, including CSI specifications and architectural drawings,

J E LD - we n . c o m 21
please visit www.jeld-wen.com/architecturaltoolbox.
door: C2060, SINGLE-HIP PANEL WITH OG STICKING

DOORs: C3000, flat panel with square sticking and c2020 SINGLE-hip panel with OG sticking (custom quilt carving)
 DOOR: v2030, SINGLE-HIP PANEL WITH v-groove design and OG sticking
doors: C3000, flat panel with square sticking

J E LD - we n . c o m 23
 I n s ta l l at i o n , c a r e a n d m a i n t e n a n c e

JELD-WEN Custom Carved Interior Doors

®
Oil-based paints (employing drying oils such as linseed or tung oils)
General Instructions and some alkyd enamel paints are compatible with the primer.
Handling The slower drying alkyd enamel top coats (those employing
long-oil alkyds) should not be used. If you must use an alkyd
1. Avoid dragging doors across one another and keep doors clean.
enamel system, ask your paint store to recommend a quicker
2. Store flat on a level surface in a dry, well-ventilated building. drying short-oil system. The slower the solvent evaporates,
3. Doors should be conditioned to average prevailing the more likely it is to saturate the primer and possibly leach
relative humidity. naturally occurring chemicals out of the wood, which can affect
4. Doors should not be subject to extreme or rapid changes appearance or cure of the top coat.
in heat or humidity. Avoid sudden changes such as forced Lacquers are not recommended over latex primers due to the
heat to dry out a building. Doors should not be delivered strong solvents they contain. Aside from the flammability and
to the job site or installed until concrete floors, foundation, toxicity issues involved with their use, their adhesion to acrylic
plaster or drywall are cured. primer is poor.
5. In addition to finishing both door surfaces, all ends and edges Wood preservatives are not recommended. They may contain
must be sealed with an effective coating before installation, metals and waxes which inhibit the adhesion of top coats applied
to prevent undue moisture absorption. Additional coats of the fin- subsequently to the surface.
ish materials will increase resistance to moisture absorption. Be sure to select a finish coating specifically intended for the job,
from a reputable coatings manufacturer. Make certain that it is
Fitting and Hanging
a top-quality product with a list of ingredients and application
1. Allow approximately 3/16" clearance on width. instructions on the label. Read the label thoroughly and follow the
2. Caution must be used to avoid impairing the strength instructions explicitly.
of the door when trimming. Trim no more than 3/16"
from each side. Surface Preparation
3. Use three hinges on all 6'8" doors. Use four hinges on all 8'0" The surface must be clean, dry and free from dust, dirt, mildew
doors. Hinges must be set in a straight line to prevent distortion. and other contamination. Areas of door lacking primer should be
4. Jambs and stops must be set square and plumb. lightly sanded with 220-grit sandpaper and then spot-primed with
a latex-acrylic primer.
5. Immediately after cutting and fitting (before hanging) seal
all cut surfaces and ends of doors with an effective coating. Repriming is not recommended. Some of the primers intended for
use on raw wood have penetrants and solvents, which can soften
JELD-WEN Custom Carved Doors— the latex primer or inhibit adhesion.
Finishing Recommendations Thinning the Finishing Coat
1. Doors furnished preprimed should be carefully wiped clean and Most finish coatings are supplied ready-to-use with little or no
finished with two coats of top quality latex or oil-based paint. thinning necessary for application. If some thinning is required,
2. To properly seal and finish doors, use a high-grade product and see the manufacturer’s suggestions on the paint label. Avoid
apply in strict compliance with the manufacturer’s specifications. thinning oil-based and alkyd materials with anything but pure
3. Ends must be sealed before hanging. mineral spirits (paint thinner). The use of kerosene, lacquer
4. Doors should be finished on all six sides before hanging or thinner, turpentine or reclaimed solvents of any kind to thin
immediately after hanging. oil-based or enamel finishes is not recommended. Some alkyd
5. Doors should not be allowed to remain unfinished when hung, enamel systems are sold too thick to spray. This allows the
nor should one side be finished when the other is not. manufacturer to meet various states’ solvent emissions regulations.
Avoid those brands.
Edge and End Sealing—All Doors
Application Parameters
1. All surfaces of the door must be properly finished.
The finish coat of paint should be applied in accordance with
2. Use a good grade of latex or oil-based paint.
the recommendation on the paint manufacturer’s label, paying
3. Do not use water-thinned latex paint. strict attention to proper covering instructions, temperature and
humidity at the time of painting, and other specific requirements.
JELD-WEN Custom Carved Doors Avoid painting in hot, humid weather or when the temperature
Painting Instructions is likely to drop below 50 degrees Fahrenheit before the paint
A waterborne all-acrylic latex finish is most compatible with our fully cures. The temperature needs to be above 50 degrees
primer and is our recommended finish. It has a chemical affinity for 24 hours. Two thin coats of paint are recommended. If spray
for the primer and allows the whole system to “breathe,” while application is used, apply a minimum of two coats, waiting for
affording durability and appearance equal to or better than the first coat to dry thoroughly before spraying the second. An
solvent-borne systems. These top coats are also user-friendly, excessively thick coat is undesirable as well. Two thin coats are
posing no flammability or health problems during application, and better than one thick coat. If the job calls for a high gloss, let
clean up easily. the first coat dry thoroughly, then lightly sand and clean the
surface with a clean dry cloth before applying a second coat.

24 J E LD - we n w i n d o w s & d o o r s
doors: C2020, 8'0" single-hip panel with 110/112 raised moulding

J E LD - we n . c o m 25
 J E LD-W E N I n t e r i o r D o o r s lab and sy stem War r anty
®

Our warranty to you What this warranty does NOT cover

JELD-WEN Interior Door slabs and systems are designed to create lasting value
®
JELD-WEN manufactures and sells both individual door slabs and complete
for your home. This warranty is effective for interior door slabs and systems door systems. This warranty does not cover parts or components (e.g., locksets,
manufactured by us on or after October 1, 2008 for use in the United States handles, etc.) not sold by JELD-WEN to the original owner. See your distributor
and Canada. Separate warranties apply for our Custom, Premium Wood and or dealer regarding the warranty on the entire door system and/or these other
Exterior door collections. Any previous warranties will continue to apply to door components.
products manufactured by us prior to this date. For additional information, We are not liable for:
including care and maintenance, installation and finishing instructions, see your
dealer or refer to www.jeld-wen.com. • Normal wear and tear; natural variations in the color or texture of wood.
• Problems due to misuse, abuse, failure to follow the care and maintenance
What this warranty COVERS instructions; or as a result of any cause beyond our reasonable control
We warrant to the original owner1 that JELD-WEN products will be free from (e.g. fire, flood, earthquake, other acts of nature, and acts of third parties
defects in material or workmanship as identified below from the date of initial outside of our control).
purchase for the time periods described below. Should an Interior door slab or • Problems related to: improper finishing of all surfaces (front and back) and
system be deemed defective, we will, at our option, either repair or replace the edges (top, bottom, and sides) of the door slab; variation or unsatisfactory
defective product or components, or refund the purchase price. results in sheen or texture resulting from the field application of paint or
any other finishing material.
Owner-Occupied Single-Family Residence
• Warp which does not exceed 1/4" in the plane of the door slab itself; any
Limited Warranty warp for a door panel 3'0" wide by 8'0" (914 mm by 2450 mm) high.
Interior Door Slabs: Our interior door slabs will be free from defects in • Bow or misalignment in the frame or jamb in which the door slab is hung.
materials and workmanship for five (5) years from the date of initial purchase. • Problems due to improper assembly or installation (not in conformance
Door Frames: Our door frames will be free from defects in materials and with our instructions).
workmanship for one (1) year from the date of initial purchase. • Structural integrity issues or other problems caused by improper fitting of
the hardware or improper sizing of the slab, or other door entry system
Commercial Limited Warranty (Other than Owner- assembly problems.
Occupied Single-Family Residence) • Damage or poor product performance resulting from installation into a
condition that exceeds product design standards and/or certified
Coverage is the same as for Owner-Occupied Single-Family residences as listed
performance specifications and/or does not comply with applicable
above.
building codes.
Transferability • Hardware or inserts that are not provided by us, such as locksets, door
handles, strikes, etc.
This warranty is not transferable.
• Cost for labor, removal or disposal of defective product(s), installation or
How to get assistance finishing of the replacement door or component.
If you have a problem with your JELD-WEN Interior Door, immediately upon • Incidental or consequential damage. Some states/provinces do not allow
discovery contact the distributor or dealer from whom you purchased our the exclusion or limitation of incidental or consequential damages, so this
product or contact us directly: may not apply to you.
Mail: JELD-WEN Custom Service Note: Color variation of pre-finished molded doors is not considered a defect.
Attn.: Interior Door Warranty Claims
P.O. Box 1329, Klamath Falls, OR 97601
Important Legal Information
Phone: 800-JELD-WEN (800-535-3936)
This Warranty sets forth our maximum liability for our products. We
Fax: 800-436-5954 shall not be liable for special, indirect, consequential, or incidental
Email: CustomerServiceAgents@jeld-wen.com damages. Your sole and exclusive remedy with respect to any and
all losses or damages resulting from any cause whatsoever shall be
We can respond quickly and efficiently if you provide the following: a) date and
as specified above. We make no other warranty or guarantee, either
location of purchase, b) how to contact you, c) the address of where the product
express or implied, including implied warranties of merchantability
can be inspected, and d) a description of the apparent problem and the product
and fitness for a particular purpose to the original purchaser or to any
(photographs are helpful).
subsequent user of the product, except as expressly contained herein.
What we will do In the event state or provincial law precludes exclusion or limitation
Upon receiving your notification, we will send out an acknowledgement within of implied warranties, the duration of any such warranties shall be
three business days of receipt to the contact identified. We will investigate no longer than, and the time and manner of presenting any claim
your claim and begin to take appropriate action within 30 days after receipt of thereon shall be the same as, that provided in the express warranty
notification. If it is determined that the product does not have a defect covered stated herein.
by the warranty, we may charge an inspection fee for an onsite inspection
that is required or requested by you. If we determine that there is a defect we No distributor, dealer or representative of JELD-WEN has the authority to change,
will repair the product/component, or ship a replacement product/component modify or expand this warranty.
to the distributor or person making the claim in the same specification as the 1This warranty extends to the original owner (original owner means the contractor/
product originally sold to the distributor. Replacement components/products are dealer/distributor/purchaser and the initial owner of the structure where the
warranted for the balance of the original product warranty or 90 days, whichever product is initially installed) and is not transferable. The original purchaser of this
is longer. If we are unable to provide replacement and repair is not practical or product acknowledges that they have read this warranty, understand it and are
cannot be made timely then we will refund the purchase price. This guarantee bound by its terms and agrees to provide this warranty to the original owner of
gives you specific legal rights, and you may have other rights that vary from the structure into which the product is installed. Should state or provincial law
state/province to state/province. preclude no transferability, then the warranty period is effective as applicable up
If the claimed nonconformity is warp of a door slab, we may defer repairing or to five (5) years from the date of initial purchase.
replacing the door slab for a period up to twelve (12) months from the date of © 2008 JELD-WEN, inc. | JELD-WEN is a registered trademark of
claim. It is not uncommon for a temporary warp condition to occur as the door JELD-WEN, inc., Oregon, USA.
slab adjusts to local humidity and temperature conditions. This deferral will not
be counted against the warranty period.

26 J E LD - we n w i n d o w s & d o o r s
 A b o u t J EL D - W EN

Since 1960, when JELD-WEN began with one

Oregon millwork plant, we’ve been dedicated
to crafting reliable window and doors. Today
you can see, touch and feel reliability in our
beautiful windows and doors because of
their durability, energy efficiency and
worry-free performance.

We measure our success by the relationships

we build with our customers, suppliers and
communities where we live and work. We’ve
partnered with organizations such as the
Green Building Initiative, which accelerates
green-building practices by promoting
environmentally progressive approaches that
are practical, affordable and accessible.

Another way we fulfill our commitment to the

communities where we operate, is through the
JELD-WEN Foundation and the JELD-WEN
Tradition Foundation. We’ve been the title
sponsor of the JELD-WEN Tradition since this
championship golf tournament moved to Oregon
in 2003. We’re also proud to be the official
window, door and millwork provider of the
PGA TOUR, and Proud Partner of THE PLAYERS.

J E LD - we n . c o m 27
door: V2030, single-hip panel with v-groove design and OG sticking
the JEld-WEn website is your ultimate resource for learning about
our reliable windows and doors. it has all the product information
and design advice you need. visit us at www.jeld-wen.com today.

©2009, 2003, JEld-WEn, inc.; JEld-WEn, the JW icon and reliability for real life are trademarks or registered trademarks
of JEld-WEn, inc., oregon, usa. all other trademarks are the property of their respective owners.

JEld-WEn reserves the right to change product specifications without notice.

Please check our website, www.jeld-wen.com, for current information.

10-474 06/09 (cds 6M)