Wood-Mizer® Sawmill

Parts Manual

LT15 rev. E8.14

Safety is our #1 concern!

Form #799

Models Affected:

LT15D10
LT15D17
LT15E10H
LT15E10L
LT15E10L-ICE
LT15EH15N
LT15G19
LT15G25
LT15G25INT

WARNING! Read and understand this

! manual before using this machine.
 California
Proposition 65 Warning

WARNING: Breathing gas/diesel engine exhaust exposes you to chemicals known to

the State of California to cause cancer and birth defects or other reproductive harm.

Always start and operate the engine in a well-ventilated area.

If in an enclosed area, vent the exhaust to the outside.
Do not modify or tamper with the exhaust system.
Do not idle the engine except as necessary.

For more information go to www.P65warnings.ca.gov.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the State of California to cause cancer. Avoid inhaling
wood dust or use a dust mask or other safeguards for personal protection.

For more information go to www.P65Warnings.ca.gov/wood.

Active Patents assigned to Wood-Mizer, LLC

Wood-Mizer, LLC has received patents that protect our inventions which are a result of a dedication to
research, innovation, development, and design. Learn more at: woodmizer.com/patents

©2022 Wood-Mizer LLC

Printed in the United States of America, all rights reserved. No part of this manual may be reproduced in any form by any
photographic, electronic, mechanical or other means or used in any information storage and retrieval system without
written permission from

Wood-Mizer, LLC
8180 West 10th Street
Indianapolis, Indiana 46214
Table of Contents Section-Page
SECTION 1 REPLACEMENT PARTS
1.1 How To Use The Parts List.................................................................... 1-1
To Order Parts ......................................................................1-1
1.2 Sample Assembly................................................................................... 1-1
1.3 Torque Values ........................................................................................ 1-2

SECTION 2 BLADE GUIDE ROLLERS & ARM

2.1 Blade Guide Assembly, Idle Side .......................................................... 2-1
2.2 Blade Guide Assembly, Drive Side ....................................................... 2-3
2.3 Blade Guide Arm ............................................................................... 2-5

SECTION 3 BLADE WHEELS & TENSIONER

3.1 Blade Drive Assembly ......................................................................... 3-1
3.2 Idle Blade Wheel Assembly................................................................... 3-2
3.3 Blade Tensioner Assembly .................................................................... 3-3

SECTION 4 SAW HEAD

4.1 Water Lube Assembly............................................................................ 4-1
4.2 Saw Head Decals ................................................................................... 4-3
4.3 Blade Housing Covers & Wood Blocks ................................................ 4-5

SECTION 5 BATTERY BOX

5.1 Battery Box Assembly .......................................................................... 5-1

SECTION 6 UP/DOWN SYSTEM

6.1 Saw Head Mount.................................................................................... 6-1
6.2 Manual Crank Assembly (E10, G13 & D10)......................................... 6-3
6.3 Manual Crank Assembly (D17/D19/G25) ............................................. 6-5
6.4 Up/Down Reducer Assembly (Optional)............................................... 6-7
6.5 Up/Down Assist Assembly ................................................................. 6-8

SECTION 7 FEED SYSTEM & TRACK ROLLERS

7.1 Track Rail, Rollers, & Travel Pins......................................................... 7-1
7.2 Rail Wiper .............................................................................................. 7-3
7.3 Feed Rope, Pulleys & Brackets.............................................................. 7-4
7.4 Manual Feed Crank Handle ................................................................... 7-5

SECTION 8 BED FRAME ASSEMBLY

8.1 Log Wedge, Loading Ramps, & Cant Hook (Optional) ........................ 8-1
8.2 Bed Section & Connecting Hardware .................................................... 8-2
8.3 Leg Assembly ........................................................................................ 8-3
8.4 Log Side Support Assembly .................................................................. 8-4
8.5 Log Clamp.............................................................................................. 8-5

Table of Contents WM doc 10/6/23 iii

 Replacement Parts
1 How To Use The Parts List

SECTION 1 REPLACEMENT PARTS

1.1 How To Use The Parts List

 Use the table of contents to locate the assembly that contains the part you need.

 Go to the appropriate section and locate the part in the illustration.

 Use the number pointing to the part to locate the correct part number and description in the table.

 Parts shown indented under another part are included with that part.

To Order Parts

 From the continental US, call 1-800-525-8100 to order parts. Have your customer number, vehicle
identification number, and part numbers ready when you call.

 From other international locations, contact the Wood-Mizer distributor in your area for parts.

1.2 Sample Assembly

REF PART # DESCRIPTION COMMENTS QTY.

012345 SAMPLE ASSEMBLY, COMPLETE INCLUDES ITEMS 1-6 1
1 F02222-22 Sample Part 1
2 F03333-33 Sample Part 2
098765 Sample Subassembly Includes items 3-6 1
3 S04444-44 Subassembly Sample Part 1
4 K55555 Subassembly Sample Part 1
054321 Sample Sub-Subassembly Includes items 5-6 2
5 022222 Sub-Subassembly Sample Part 1
6 F10234-56 Sub-Subassembly Sample Part 1

The Sample Assembly, Complete, part number 02345 (top level assembly) includes two parts (F0222-22
and F0333-33) and the 098765 subassembly.

Subassembly 098765 contains two parts(S04444-44 and K55555) and two copies of sub-subassembly
054321.

Each sub-subassembly 054321 contains two parts (022222 and F10234-56).

1-1 MB200 10/6/23 Replacement Parts

 Replacement Parts
Torque Values 1
1.3 Torque Values

Grade Units SAE 5 SAE 8

Grade Mark

Bolt Threads.
Units SAE 5 SAE 8
Dia. Per In.
6 32 in-lbs (Nm) 20 (2.3) -
8 32 in-lbs (Nm) 24 (2.7) 30 (3.4)
10 24 in-lbs (Nm) 35 (4.0) 45 (5.1)
10 32 in-lbs (Nm) 40 (4.5) 50 (5.7)
12 24 in-lbs (Nm) 50 (5.7) 65 (7.3)
1/4 20 in-lbs (Nm) 95 (10.7) 125 (14.1)
1/4 28 in-lbs (Nm) 95 (10.7) 150 (17.0)
5/16 18 ft-lbs (Nm) 17 (22.6) 23 (31.2)
5/16 24 ft-lbs (Nm) 20 (27.1) 25 (33.8)
3/8 16 ft-lbs (Nm) 30 (40.7) 40 (54.2)
3/8 24 ft-lbs (Nm) 35 (47.5) 45 (61.0)
7/16 14 ft-lbs (Nm) 50 (67.8) 65 (88.1)
7/16 20 ft-lbs (Nm) 55 (74.6) 70 (94.9)
1/2 13 ft-lbs (Nm) 75 (101.7) 100 (135.6)
1/2 20 ft-lbs (Nm) 85 (115.3) 110 (149.2)
9/16 12 ft-lbs (Nm) 105 (142.4) 135 (183.1)
9/16 18 ft-lbs (Nm) 115 (155.9) 150 (203.4)
5/8 11 ft-lbs (Nm) 150 (203.4) 195 (264.4)
5/8 18 ft-lbs (Nm) 160 (217.0) 210 (284.8)
3/4 10 ft-lbs (Nm) 170 (230.5) 220 (298.3)
3/4 16 ft-lbs (Nm) 175 (237.3) 225 (305.1)
7/8 9 ft-lbs (Nm) 302 (409.5) 473 (640.9)
7/8 14 ft-lbs (Nm) 300 (406.8) 400 (542.4)
1 8 ft-lbs (Nm) 466 (631.8) 714 (967.4)

0HWULF%ROW+HDG  

,GHQWLILFDWLRQ 0HWULF 0HWULF
*UDGH *UDGH

COARSE THREAD FINE THREAD

Wrench
Diameter & Metric 8.8 Metric 10.9 Diameter & Metric 8.8 Metric 10.9
Thread Thread Size
Pitch N-m lbs-ft N-m lbs-ft Pitch N-m lbs-ft N-m lbs-ft
6 x 1.0 8 6 11 8 10 mm
8 x 1.25 20 15 27 20 8 x 1.0 21 16 29 22 13 mm
10 x 1.5 39 29 54 40 10 x 1.25 41 30 57 42 16 mm
12 x 1.75 68 50 94 70 12 x 1.25 75 55 103 76 18 mm
14 x 2.0 109 80 151 111 14 x 1.5 118 87 163 120 21 mm
16 x 2.0 169 125 234 173 16 x 1.5 181 133 250 184 24 mm
18 x 2.5 234 172 323 239 18 x 1.5 263 194 363 268 27 mm
20 x 2.5 330 244 457 337 20 x 1.5 367 270 507 374 30 mm
22 x 2.5 451 332 623 460 22 x 1.5 495 365 684 505 34 mm
24 x 3.0 571 421 790 583 24 x 2.0 623 459 861 635 36 mm
30 x 3.0 1175 867 1626 1199 30 x 2.0 1258 928 1740 1283 46 mm

Replacement Parts MB200 10/6/23 1-2

2 Blade Guide Rollers & Arm
Blade Guide Assembly, Idle Side

SECTION 2 BLADE GUIDE ROLLERS & ARM

2.1 Blade Guide Assembly, Idle Side

1
5

7
4
4
10 7
11 6
3
9 2
19
8
21

11 18
13 17
14 10
13 20
16
14 12

23
14 22
15 13 SM0310C Optional Relube
Blade Guide Roller
14
13

REF PART # DESCRIPTION COMMENTS QTY.

A08197 BLADE GUIDE ASSEMBLY, COMPLETE IDLE 1
SIDE
1 F05010-15 Nut, 1/2-20 Hex Nylon Lock 1
A04925 Roller Assembly, Blade Guide (standard) 1
K07079 Bearing Kit, Blade Guide Rebuild 1
2 P04252 Washer, 5/8" White Felt 1
3 F04254-1 Ring, 1 1/8" Interior Retaining 1
4 015975 Bearing, R8-2RS Blade Guide Available in assemblies only. 2
5 P06455 Washer, 5/8" Gray Felt 1
F05005-105 Screw, 1/4-28 x 1/4” Socket Head 1
Cup Point Set Black Oxide
057407-1507 Instruction Sheet, Blade Guide 1
Rebuild
6 S04250 Roller, Flanged Blade Guide Available in assemblies only. 1
A04925-364 Instruction Sheet, Blade Guide Roller 1
Replacement
7 S04253 Spacer, Blade Guide 2

2-1 WM doc 10/6/23 Blade Guide Rollers & Arm

 Blade Guide Rollers & Arm
Blade Guide Assembly, Idle Side 2
REF PART # DESCRIPTION COMMENTS QTY.
8 036373 Bolt, Blade Guide Roller 1
9 W08495 Bracket, Blade Guide Idle Side With Water 1
Tube
10 F05007-96 Screw, 3/8-24 X 1 1/4" Stainless Steel Socket 2
Head Flat Point
11 F05010-22 Nut, 3/8-24 Jam 2
12 S08196 Shaft, Blade Guide Adjustment 1
13 F05007-95 SCREW, 3/8-24 X 3/4" STAINLESS STEEL 4
SOCKET HEAD FLAT POINT
14 F05010-22 NUT, 3/8-24 JAM 4
15 W08159 TUBE, BLADE GUIDE MOUNT (See Section 2.4) 1
016568 ROLLER ASSEMBLY, BLADE GUIDE RELUBE 1
(OPTIONAL)
057407 Bearing Kit, Relube Blade Guide Rebuild 1
16 P04252 Washer, 5/8" White Felt 1
17 F04254-1 Ring, 1 1/8" Interior Retaining 1
18 015975 Bearing, R8-2RS Blade Guide Available in assemblies only. 2
Bearing must be modified for
use with relube roller assem-
blies. Remove one seal from
each bearing, place open sides
facing each other and place
spacer 035411 between bear-
ings.
19 P06455 Washer, 5/8" Gray Felt 1
057407-1507 Instruction Sheet, Blade Guide Rebuild 1
20 035411 Spacer, Blade Guide Bearing 1
21 035426 Roller, Flanged Blade Guide Relube Available in assemblies only. 1
A04925-364 Instruction Sheet, Blade Guide Roller 1
Replacement
22 S08192 BOLT, BLADE GUIDE ROLLER (RELUBE ONLY) 1
23 P05060 FITTING, 1/4-28 GREASE (RELUBE ONLY) 1

Blade Guide Rollers & Arm WM doc 10/6/23 2-2

2 Blade Guide Rollers & Arm
Blade Guide Assembly, Drive Side

2.2 Blade Guide Assembly, Drive Side

4
10 1
4
2
7

9 11 7
6

3
8
21
13
18
13 19
14 11 16

23 20
12 10
15
17
14 Optional Relube
22 Blade Guide Roller
14
14 150122D
13 13

REF PART # DESCRIPTION COMMENTS QTY.

A08191 BLADE GUIDE ASSEMBLY, COMPLETE DRIVE 1
SIDE
1 F05010-15 Nut, 1/2-20 Hex Nylon Lock 1
A04925 Roller Assembly, Blade Guide (standard) 1
K07079 Bearing Kit, Blade Guide Rebuild 1
2 P04252 Washer, 5/8" White Felt 1
3 F04254-1 Ring, 1 1/8" Interior Retaining 1
4 015975 Bearing, R8-2RS Blade Guide Available in assemblies only. 2
5 P06455 Washer, 5/8" Gray Felt 1
F05005-105 Screw, 1/4-28 x 1/4” Socket Head 1
Cup Point Set Black Oxide
057407-1507 Instruction Sheet, Blade Guide 1
Rebuild
6 S04250 Roller, Flanged Blade Guide Available in assemblies only. 1
A04925-364 Instruction Sheet, Blade Guide Roller 1
Replacement
7 S04253 Spacer, Blade Guide 2
8 036373 Bolt, Blade Guide Roller 1
9 W08482 Bracket, Blade Guide Drive Side 1
10 F05007-96 Screw, 3/8-24 X 1 1/4" Stainless Steel Socket 2
Head Flat Point
11 F05010-22 Nut, 3/8-24 Jam 2
12 S08196 Shaft, Blade Guide Adjustment 1
13 F05007-95 SCREW, 3/8-24 X 3/4" STAINLESS STEEL 3
SOCKET HEAD FLAT POINT SET
14 F05010-22 NUT, 3/8-24 JAM 4
15 W08159 TUBE WELDMENT, BLADE GUIDE MOUNT (Part 1
of saw frame weldment)

2-3 WM doc 10/6/23 Blade Guide Rollers & Arm

 Blade Guide Rollers & Arm
Blade Guide Assembly, Drive Side 2
REF PART # DESCRIPTION COMMENTS QTY.
016568 ROLLER ASSEMBLY, BLADE GUIDE RELUBE 1
(OPTIONAL)
057407 Bearing Kit, Relube Blade Guide Rebuild 1
16 P04252 Washer, 5/8" White Felt 1
17 F04254-1 Ring, 1 1/8" Interior Retaining 1
18 015975 Bearing, R8-2RS Blade Guide Available in assemblies only. 2
Bearing must be modified for
use with relube roller assem-
blies. Remove one seal from
each bearing, place open sides
facing each other and place
spacer 035411 between bear-
ings.
19 P06455 Washer, 5/8" Gray Felt 1
20 035411 Spacer, Blade Guide Bearing 1
057407-1507 Instruction Sheet, Blade Guide Rebuild 1
21 035426 Roller, Flanged Blade Guide Relube Available in assemblies only. 1
A04925-364 Instruction Sheet, Blade Guide Roller 1
Replacement
22 S08192 BOLT, BLADE GUIDE ROLLER (RELUBE ONLY) 1
23 P05060 FITTING, 1/4-28 GREASE (RELUBE ONLY) 1

Blade Guide Rollers & Arm WM doc 10/6/23 2-4

 Blade Guide Rollers & Arm
2 Blade Guide Arm

2.3 Blade Guide Arm

9
14
11

13 10
16

15 20
12 21 22
2 4
3

6
1
5
7 150125-4D
8

REF PART # DESCRIPTION COMMENTS QTY.

046966 ARM ASSEMBLY, LT15 BLADE GUIDE (2004) 1
1 046965 Arm Weldment, LT15 Blade Guide (2004) 1
2 Blade Guide Parts ((See Section 2.1))
3 014955 Guard, LT15 Blade Guide Arm 1
4 015849 Decal, LT15 Blade Guide Arm 1
5 F05005-1 Bolt, 1/4-20 x 3/4” Hex Head Full Thread 1
6 F05010-21 Nut, 1/4-20 Hex Lock 1
7 F05010-22 Nut, 3/8-24 Hex Jam 4
8 F05007-95 Screw, 3/8-24 x 3/4” Socket Head Flat Point 4
Set
9 014973 Pad, Blade Guide Slide 3
10 076118 PLATE, LT15 WIDE BLADE GUIDE ARM 1
ADJUSTMENT
11 076117 PLATE, LT15 WIDE BLADE GUIDE ARM LINK 1
12 F05007-87 BOLT, 3/8-16 X 1” HEX HEAD GRADE 5 2
13 F05011-3 WASHER, 3/8” SAE FLAT 3
14 F05010-10 NUT, 3/8-16 HEX NYLON LOCK 3
15 F05007-78 BOLT, 3/8-16 X 1 1/2” HEX HEAD GRADE 5 1
16 049008 GRIP, FOAM FLAT 1/4 X 3/4 1
17 F05007-95 SCREW, 3/8-24 X 3/4” STAINLESS SOCKET 8
HEAD FLAT POINT SET
18 F05010-22 NUT, 3/8-24 HEX JAM 8
19 015899 BUSHING, BLADE GUIDE ARM 2
20 014882 BRACKET, BLADE GUIDE ARM GUIDE 1
21 F05006-124 BOLT, 5/16-18 X 1” FLAT HEAD SOCKET 1
22 F05010-6 NUT, 5/16-18 HEX LOCK 1

2-5 WM doc 10/6/23 Blade Guide Rollers & Arm

 Blade Wheels & Tensioner
Blade Drive Assembly 3
SECTION 3 BLADE WHEELS & TENSIONER
3.1 Blade Drive Assembly

11

12 5 4 2
32 10
1
6

13
7

9
8
150046D

REF PART # DESCRIPTION COMMENTS QTY.

BLADE WHEEL BRAKE PARTS See Section SECTION 5
014995 WHEEL ASSEMBLY, DRIVE SIDE BLADE (E10) 1
036657 WHEEL ASSEMBLY, DRIVE SIDE BLADE (D17, 1
G19 & G25)
1 014727 Wheel, Drive Side Blade (E10 ) 1
047702 Wheel, Drive Side Blade (D17, G19 & G25) 1
2 014811 Bearing, #6207 2RS 2
3 014730 Spacer, Drive Bearing 1
4 F04254-30 Ring, 3.121 IR Beveled Retaining 1
5 014728 WASHER, DRIVE WHEEL RETAINING 1
6 F05007-87 BOLT, 3/8-16 X 1” HEX HEAD 1
7 014729 SHAFT, LT15 DRIVE SIDE BLADE WHEEL 1
8 F05007-95 SCREW, 3/8-24 X 3/4” FLAT POINT SOCKET 3
9 F05010-22 NUT, 3/8-24 HEX JAM 4
10 BELT, DRIVE See Section SECTION 5 1
11 P04185 BELT, B57 1
12 F05011-4 WASHER, 3/8” SPLIT LOCK 1
13 F05007-96 SCREW, 3/8-24 X 1 1/4” FLAT POINT SOCKET 1

Blade Wheels & Tensioner WM doc 10/6/23 3-1

3 Blade Wheels & Tensioner
Idle Blade Wheel Assembly

3.2 Idle Blade Wheel Assembly

4 17

5
7 2
3
8

8
9

10
16

14
14 14 11

15 1
13
14 13 12
280029B

16

REF PART # DESCRIPTION COMMENTS QTY.

A08218 WHEEL ASSEMBLY, IDLE SIDE BLADE 1
1 P08125 Wheel, Idle Side Blade Available in assemblies only. 1
2 P08066 Bearing, Idle Side Blade Wheel #6305-AA, C3, 2
ABEC-1, SRI-2 Grease
3 F04254-21 Ring, 2 7/16" Internal Retaining 1
4 S08220 WASHER, IDLE BLADE WHEEL RETAINER 1
5 F05006-102 BOLT, 5/16-18 X 3/4” HEX HEAD 1
6 P04185 BELT, BLADE WHEEL B57 1
7 F05009-3 BOLT, 5/8-11 X 4 1/2” HEX HEAD 1
8 014834 BEARING, 5/8” I.D. W/SNAP RING 2
9 F05010-34 NUT, 5/8-11 HEX NYLON LOCK 1
10 049349 IDLER WELDMENT, BLADE WHEEL 1
11 S12565 SHAFT, IDLE WHEEL 1
12 F05008-111 BOLT, 1/2-20 X 3 3/4” HEX HEAD FULL THREAD 1
GRADE 2
13 S04253 SPACER, 1/2” I.D. FLANGED 2
14 F05010-16 NUT, 1/2-20 HEX JAM 4
15 F05011-9 WASHER, 1/2” SPLIT LOCK 1
16 F05008-127 BOLT, 1/2-20 X 1 3/4” HEX HEAD GRADE 5 2
17 F05011-13 WASHER, 5/16” SPLIT LOCK 1

3-2 WM doc 10/6/23 Blade Wheels & Tensioner

 Blade Wheels & Tensioner
Blade Tensioner Assembly 3
3.3 Blade Tensioner Assembly

9 2 5

1
2
8
11
15

12 10
13
6 8
12 7
14
16
17
18 150243
19

REF PART # DESCRIPTION COMMENTS QTY.

074801 TENSION ASSEMBLY, CAM ACTUATED BLADE 1
1 049104 Cam, Tension 1
2 P05135 Bushing, 5/8” x 7/8” x 1/2” Bronze 2
3 103801 Handle, Blade Tensioner, LT15/28/35 1
4 P04211 Knob, 5/8-18 Ball 1
5 F05012-16 Pin, 3/16” x 1 1/4” Roll 2
6 128072 Block, Tensioner Bearing Mount 1
7 048219 Cam Follower, 3/8" x 1 3/8" x 13/16" 1
8 F05011-3 Washer, 3/8” SAE Flat 2
9 F05007-202 Bolt, 3/8 x 2 1/2” Socket Head Shoulder 1
10 F05010-58 Nut, 5/16-18 Hex Nylon Lock 1
11 038642 Shaft Weldment, Blade Tension 1
12 014925 Guide, Tension Handle 3
13 014828 Spring, Rubber Tensioner Blade 1
14 F05011-62 Washer, 3/4" SAE Flat 1
15 F05012-12 Pin, 1/4" x 1 1/4" Roll 1
16 F05007-157 Bolt, 3/8-16 x 2 1/2" Hex Head Full Thread 1
17 F05010-29 Nut, 3/8-16 Jam 1
18 F05011-4 Washer, 3/8” Split Lock 1
19 F05011-29 Washer, 3/4" USS Flat 1

Blade Wheels & Tensioner WM doc 10/6/23 3-3

 Saw Head
4 Water Lube Assembly

SECTION 4 SAW HEAD

4.1 Water Lube Assembly

10

2
3
9 7

4
14 6
16
15

13
17
11 5
12

150050D
18

REF PART # DESCRIPTION COMMENTS QTY.

015799 WATER LUBE ASSEMBLY 1
1 014642 Bottle Assembly, Water Lube w/Cap 1
061372 O-ring, Water Bottle Cap If the water bottle cap keeps 1
leaking, add this o-ring to the
cap. Leave the existing o-ring
installed.
2 014636 Fitting, 3/4FPT x 3/4MPT 1
3 014100 Fitting, Water Lube Shutoff Valve 1
4 014113 Fitting, 5/8” NPT to 3/8” Hose Barb 1
5 R01885 Tubing, Water Lube 3/8” I.D. 12.8
ft.
6 015798 Tray Weldment, LT15 Water Lube 1
7 F05005-34 Bolt, 1/4-20 x 1” Carriage Head 2
8 F05010-21 Nut, 1/4-20 Hex Lock 2
9 F05011-11 Washer, 1/4” SAE Flat 2
10 P11668 Strap, 20” Rubber w/Hook 2
11 065635 Valve, LT15 Water Shut Off 1
12 F05007-230 Bolt, 3/8-16 x 2 3/4” Hex Head Full Thread 1
Grade 5
13 F05011-3 Washer, 3/8” Flat SAE 2

4-1 WM doc 10/6/23 Saw Head

 Saw Head
Water Lube Assembly 4
REF PART # DESCRIPTION COMMENTS QTY.
14 F05010-10 Nut, 3/8-16 Hex Nylon Lock 1
15 P07584 Clamp, 1/2” EMT Coated 4
16 F05006-1 Bolt, 5/16-18 x 1” Hex Head 3
17 F05011-17 Washer, 5/16” SAE Flat 6
18 F05010-58 Nut, 5/16-18 Nylok Hex 3

Saw Head WM doc 10/6/23 4-2

4 Saw Head
Saw Head Decals

4.2 Saw Head Decals

Av pa rt

Bu
oid of

rn
Fa sult P roduc
Wo -52

re -Mi zer 100

co ho

Ha
800
od

ilu in

nta t en

za
re se s, Inc. R eor
5-8

ct gin

rd
to rio

wi e. y
do us

th
t

so inj

an
y
ma ury
de
r #01

.
4419
15 2 M o v i n g Pa rt s C an Cru s h
An d Cu t.
Moving Parts Can Crush
And Cut.
2
M ake su re a ll g ua rd s an d c ov ers
a re in p lac e an d se cu re be fo re
M ak e s ure all g u ards an d co vers
are in p la ce a nd s ecu re b ef ore ®
o pe ra ti ng th is ma ch in e. op erat ing t his mac hin e.

F ail ure to do so w ill res ul t in Fa ilu re to d o s o will re su lt in

serio u s in ju ry. se ri ou s i nju ry.
Wo od -Mi ze r Pro d uc ts, n
I c. Woo d-M z i er Prod u cts, Inc .
80 0-5 25 -8 10 0 Re ord er # 03 3 25 4 80 0 -52 5-8 10 0 Re o rde r# 0 33 25 4

12
14 3 16
4

11 STO P!

13
Always wear eye, e ar,
resp irat ion an d fo ot
pr otect ion wh en
o pera ting this m achin e.
Fa il ure t o do so m ay

6
r esult in inju ry.
Wo od M- i ze r P rod uct s, n
I c.
80 0-52 5-81 00 R eord er #S 117 53

10
US E BOTH HA NDS !
Grasp the handle with
both hands when
operati ng the bl ade
8
tensi oner.
Failure to do so
may result in inj ury.
Woo d-Mize r P ro duc ts, n
I c.
800 -5 25-81 00 R eo rd er # 049 367

17 9

7
STOP!

Re ad an d u nd erst an d o pe ra tor’s
man ua l an d all s afe ty
i nst ruct ion s bef ore s ett in g u p,
op erat ing or mai nta ini ng th is
mac hin e.

Fai lure t o d o so ma y resu lt in

inju ry, de at h o r e qu ip me nt
d amage .
Wo od-Mi zer P ro duc ts , I nc.
80 0-52 5-81 00 R eo rd er #01 640 2

D
us
tA
co Insp H nd
nt
be ai ec az P
Fa Ke o fo nm t pr ar roje
ilu ep f th re en oj d ct
Wo r cl e ea t ec ile
800 od in e to sa ear sa w ch finge tile
- 525- Miz
- 810er
se do wd of m use rs
P ve so us ex ill.
0 ro duc re m t. itin
ts, inj ay
Inc ur re g
.
Reo
y. su
rder lt
#P1
175
4

150140-3F

REF PART # DESCRIPTION COMMENTS QTY.

1 014419 DECAL, HOT ENGINE WARNING 1
2 033254 DECAL, MOVING PARTS DANGER 2
3 S11752 DECAL, BLADE DANGER W/ARROW 1
4 015849 DECAL, BLADE GUIDE ARM STRIPE 1
5 S11753 DECAL, EYE/EAR PROTECTION WARNING 1
6 079278 DECAL, WOOD-MIZER QUALITY & INFORMA- 1
TION
7 P11754 DECAL, SAWDUST CHUTE WARNING 1
8 049367 DECAL, TENSIONER WARNING 1
9 049368 DECAL, BLADE TENSION INFO 1
10 P11789 DECAL, BLADE TRACK INFO 1
11 015784 DECAL, LT15 INCH SCALE 1
076131 DECAL, LT15 WIDE INCH SCALE 1
12 003235 DECAL, WOOD-MIZER WEBSITE 1
13 016275 DECAL, MAGNETIC QUARTER SCALE 1
14 065008 DECAL, IDLE SIDE BLACK EURO STRIPE 1
15 065002 DECAL, WHITE WOOD-MIZER LOGO 1
16 011220-LT15 DECAL, LT15 DRIVE SIDE 1

4-3 WM doc 10/6/23 Saw Head

 Saw Head
Saw Head Decals 4
REF PART # DESCRIPTION COMMENTS QTY.
011220-LT15W DECAL, LT15 WIDE DRIVE SIDE 1
011220-LT15S DECAL, LT15 START DRIVE SIDE 1
17 016402 DECAL, READ MANUAL WARNING 1

Saw Head WM doc 10/6/23 4-4

4 Saw Head
Blade Housing Covers & Wood Blocks

4.3 Blade Housing Covers & Wood Blocks

9 23 11
11
19
13 22 13

12 12

E10 and D10 Only 10 All Except E10 and D10

7
2
14
2 24
9

6 8
4
5
20
21
3 1
6

2 18
150138-1G
17
16

15

REF PART # DESCRIPTION COMMENTS QTY.

1 014984 COVER, DRIVE SIDE BLADE HOUSING See Section 4.2 1
2 F05005-15 BOLT, 1/4-20 X 1/2” HEX HEAD 8
3 F05010-9 NUT, 1/4-20 KEPS 6
4 014829 LATCH, FLEXIBLE DRAW 2
5 F05004-3 SCREW, #10-24 X 3/8” CROSS SLOTTED 8
ROUND HEAD
6 F05010-14 NUT, #10-24 SELF-LOCKING HEX 8
7 014985 COVER, IDLE SIDE BLADE HOUSING See Section 4.2 1
8 015844 BLOCK, BLADE VIBRATION DAMPENING 1
9 F05015-33 BOLT, #10 X 3/4” SLOTTED HEX WASHER 6/2
HEAD
10 016506 BLOCK, 3/4” X 1” X 2” WOOD (E10 AND D10 2
ONLY)
038633 COVER ASSEMBLY, TOP ENGINE PULLEY 1

4-5 WM doc 10/6/23 Saw Head

 Saw Head
Blade Housing Covers & Wood Blocks 4
REF PART # DESCRIPTION COMMENTS QTY.
11 074574 Cover Weldment, LT15/28 Top Belt Cover 1
12 074546 Plate, Belt Guard Cover 1
13 F05005-134 Bolt, 1/4-20 x 3/4” Hex Head w/Conical 4
Washer
14 F05011-11 WASHER, 1/4” SAE FLAT 2
15 003811 PLATE, SAWDUST DEFLECTOR 1
16 F05011-17 WASHER, 5/16” SAE FLAT 2
17 F05011-13 WASHER, 5/16” SPLIT LOCK 2
18 F05006-5 BOLT, 5/16-18 X 3/4” HEX HEAD 2
19 P05436 CLAMP, 1” EMT (E10 ONLY) 1
20 F05010-29 NUT, 3/8-16 JAM 1
21 F05007-18 SCREW, 3/8-16 X 1 1/4 SHOP SET 1
22 F05005-54 SCREW, 1/4-20 X 3 1/2” HEX HEAD (ALL 1
EXCEPT E10 AND D10)
23 F05010-21 NUT, 1/4-20 SWAGED (ALL EXCEPT E10 AND 1
D10)
24 074394 BRACKET WELDMENT, LT15 BELT ENHANCE 1

Saw Head WM doc 10/6/23 4-6

5 Battery Box
Battery Box Assembly

SECTION 5 BATTERY BOX

5.1 Battery Box Assembly

1 2
5

6 7

150078-4 9

10 8
REF PART # DESCRIPTION COMMENTS QTY.
1 028004 BATTERY, DEKA 12V 526MF 540CCA 665CA Available in assemblies only. 1
2 033358 TERMINAL, POSITIVE BATTERY 1
3 033359 TERMINAL, NEGATIVE BATTERY 1
4 016413 BOX ASSEMBLY, LT15 BATTERY 1
5 F05005-134 BOLT, 1/4-20X3/4 W/CONICAL WASHER 4
6 F05010-69 NUT, 1/4-20 HEX NYLON LOCK 4
7 034899 MOUNT WELDMENT, BATTERY/CONTROL BOX 1
8 F05007-7 BOLT, 3/8-16X1 HH 3
9 F05011-4 WASHER, 3/8 SPLIT 3
10 F05011-3 WASHER, 3/8 FLAT 3

5-1 WM doc 10/6/23 Battery Box

 Up/Down System
Saw Head Mount 6
SECTION 6 UP/DOWN SYSTEM
6.1 Saw Head Mount

11 10
3 31 30
9 7 12 32
2 13 12
4
5

3 27 28
8 29
6 7
3
1

14 15
16 17
18 19

21

16
26
20
25 22
21
150125-6C 23
24

REF PART # DESCRIPTION COMMENTS QTY.

046885 BEARING ASSEMBLY, SAW HEAD MOUNT 1
UPPER
1 046635 Bracket Weldment, Upper Saw Head Mount 1
2 F05007-35 Bolt, 3/8-16 x 4 1/2” Hex Head 3
3 F05010-10 Nut, 3/8-16 Hex Nylon Lock 5
4 P08066 Bearing, .9843” x 2.4409” x .6693” 1
5 F04254-26 Ring, 25mm 5100-98 OR 1
6 046608 Bushing, Saw Head Mount Bearing 1
7 P06030-2 Bearing, 6203-2NSL 17mm SRI-2 ABEC-1 2
8 F05007-198 Bolt, 3/8-16 x 2” Flat Socket Head 1
9 074748 Spacer, Bearing 1
10 F05010-9 Nut, 1/4-20 Keps 2
11 F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 1
12 F05011-3 Washer, 3/8” SAE Flat 2
13 F05007-125 Bolt, 3/8-16 x 2 1/2” Hex Head Grade 5 1
046886 BEARING ASSEMBLY, SAW HEAD MOUNT 1
LOWER
14 046969 Bracket Weldment, Lower Saw Head Mount 1
15 F05007-87 Bolt, 3/8-16 x 1” Hex Head Grade 5 3
16 F05010-10 Nut, 3/8-16 Hex Nylon Lock 4
17 046604 Plate, Bearing Cam 2
18 046607 Block, Bearing Spacer 1

Up/Down System WM doc 10/6/23 6-1

 Up/Down System
6 Saw Head Mount

REF PART # DESCRIPTION COMMENTS QTY.

19 F05005-68 Bolt, 1/4-20 x 1 3/4” Hex Head Grade 5 2
20 F05010-69 Nut, 1/40-20 Hex Nylon Lock 2
21 F05011-44 Washer, 3/8” Fender 3
22 046606 Shaft, Bearing Mount 1
23 046974 Washer, Spacer 2
24 P08066 Bearing, .9843” x 2.4409” x .6693” 1
25 F05004-124 Bolt, 3/8-16 x 1/2” Hex Head Grade 5 1
26 F05007-161 Bolt, 3/8-16 x 3 1/2” Carriage Head 1
27 P13576 PAD, IDLE SIDE SLIDE 2
28 F05015-1 BOLT, 1/4-20 X 1/2” SLOTTED HEX HEAD 4
29 014905 BRACKET, IDLE SIDE SLIDE PAD MOUNT 1
30 F05007-29 BOLT, 3/8-16 X 2 3/4” HEX HEAD 2
31 F05011-3 WASHER, 3/8” SAE FLAT 2
32 F05010-10 NUT, 3/8-16 HEX NYLON LOCK 2

6-2 WM doc 10/6/23 Up/Down System

 Up/Down System
Manual Crank Assembly (E10, G13 & D10) 6
6.2 Manual Crank Assembly (E10, G13 & D10)

2 1 21
3
7
6 5 11
23 10
20 3 24 6
26 25
9 8
22 16
19 4 17
12 18
29 27 14 15 12
13
30 28

44 43 42
31 41
33 38
40
34 150139-1D
35 37
32 34
36
39
REF PART # DESCRIPTION COMMENTS QTY.
046638 UP/DOWN ASSEMBLY, LT15 2006 1
1 038649 Bracket Weldment, LT15 Up/Down Mount 1
2 046648 Shaft Weldment, LT15 Up/Down Sprocket 1
3 049331 Bearing, Needle 1/2” x 3/4” Single Seal 2
4 046617 Plate, Up/Down Lock 1
5 F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2
6 F05011-11 Washer, 1/4” SAE Flat 4
7 F05010-69 Nut, 1/4-20 Hex Nylon Lock 2
8 F05011-3 Washer, 3/8” SAE Flat 3
9 F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 3
10 046627 Block, LT15 Up/Down Handle 1
11 F05012-11 Pin, 3/16” x 1” Roll 1
12 P10649 Ring, 1/2” E-Clip Retaining 2
13 046976 Bushing, 1/2” x 5/8” x 3/4” Bronze 1
14 F05011-2 Washer, 1/2” SAE Flat 1
15 046975 Spring, .72” x .576” x 1.25” Compression 1
16 046867 Plate, Handle Lock Release 1
17 046644 Shaft, Up/Down Handle 1
18 046647 Handle, 33/64” x 1 1/4” x 4” Plastic 1
19 046983 Chain, #40 x 82 5/8” Roller 1
20 P04200 Link, #40 Master 2
21 047699 Decal, LT15 Round Blade Height 1
22 036597 Bearing, 1/2” ID x 1” OD x 1/16” Bronze Thrust 1
23 P05060 Fitting, 1/4-28 Grease 1
24 048598 Plate, Pointer Up/Down 1
25 F05005-3 Bolt, 1/4-20 x 1 1/4” Hex Head Full Thread 1
Cap
26 F05010-9 Nut, 1/4-20 Keps 2

Up/Down System WM doc 10/6/23 6-3

 Up/Down System
6 Manual Crank Assembly (E10, G13 & D10)

REF PART # DESCRIPTION COMMENTS QTY.

27 076108 BRACKET, UP/DOWN CHAIN MOUNT 1
28 F05007-87 BOLT, 3/8-16 X 1” HEX HEAD GRADE 5‘ 3
29 F05011-3 WASHER, 3/8” SAE FLAT 3
30 F05010-10 NUT, 3/8-16 HEX NYLON LOCK 3
046980 IDLER ASSEMBLY, LT15 LOWER UP/DOWN 1
31 015860 Guard Weldment, Chain Tension Sprocket 1
32 015859 Cover, Chain Tension Sprocket Guard 1
33 P04333 Sprocket, #40 Idler 17T 5/8” ID 1
34 F05011-5 Washer, 5/8” SAE Flat 1
35 F05009-1 Bolt, 5/8-11 x 3” Hex Head Full Thread 1
36 F05010-5 Nut, 5/8-11 Hex 1
37 F05010-34 Nut, 5/8-11 Hex Nylon Lock 1
38 046981 Bracket, LT15 Up/Down Chain Tensioner 1
39 F05007-22 Bolt, 3/8-16 x 2” Carriage Head Full Thread 1
40 F05011-3 Washer, 3/8” SAE Flat 1
41 F05010-10 Nut, 3/8-16 Hex Nylon Lock 1
42 F05011-11 Washer, 1/4” SAE Flat 2
43 F05011-14 Washer, 1/4” Split Lock 2
44 F05005-124 Bolt, 1/4-20 x 1 1/2” Hex Head 2

6-4 WM doc 10/6/23 Up/Down System

 Up/Down System
Manual Crank Assembly (D17/D19/G25) 6
6.3 Manual Crank Assembly (D17/D19/G25)

4 5
12 38 8
6 9 25 26
7 10 24 27 28
2 11 29
13 37 14 30
31

36 6
32 15 37
1 3 21
34 16 11 20 24
33 17 22
35 23 40
39 41
42 18 19
44 43
45

59 58 57
46
56
48
53 55
54 150141F
50
49
47 52
49 51
REF PART # DESCRIPTION COMMENTS QTY.
038582 UP/DOWN ASSEMBLY, GEAR REDUCED LT15 1
1 054610 Guard, Gear Reducer 1
2 038649 Up/Down Weldment, LT15 1
3 049371 Plate, Rear Up/Down Reducer 1
4 F05005-18 Bolt, 1/4-20 x 2 3/4” Hex Head 4
5 054587 Spacer, Plate Mount 4
6 P22317 Bushing, 1/2” x 3/4” Bronzed Flanged 2
7 049394 Spacer, Small Gear 1
8 F05012-16 Pin, 3/16” x 1 1/4” Roll 1
9 074940 Gear, 12T Up/Down 1
10 054589 Spacer, Small Gear Lock 1
11 F05005-60 Bolt, 1/4-20 x 3/4” Stainless Steel 4
12 046648 Shaft Weldment, LT15 Up/Down 1
13 F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2
14 049331 Bearing, Needle 1/2” x 3/4” Single Seal 2
15 049373 Bushing, Gear Mount 1
16 F05012-19 Pin, 3/16” x 7/8” Roll 1
17 074941 Gear, 24T Up/Down 1
18 049395 Plate, 2:1 Up/Down Lock 1
19 054588 Decal, Gear Reduced Blade Height 1
20 049372 Plate, Front Up/Down Reducer 1
21 049377 Shaft, Gear Reduced Up/Down 1
22 046627 Block, Up/Down Handle 1
23 F05012-11 Pin, 3/16” x 1” Roll 1
24 P10649 E-Clip, 1/2” Shaft 2
25 F05011-2 Washer, 1/2” SAE Flat 1

Up/Down System WM doc 10/6/23 6-5

 Up/Down System
6 Manual Crank Assembly (D17/D19/G25)

REF PART # DESCRIPTION COMMENTS QTY.

26 046975 Spring, Compression .72” OD x .576” ID x 1
1.25” L
27 046976 Bushing, Bronze 1/2” ID x 5/8” OD x 3/4” L 1
28 036597 Bearing, 1/2” ID x 1” OD x 1/16” Bronze Thrust 1
29 046867 Plate, Lock Release 1
30 046644 Shaft, Up/Down Handle 1
31 046647 Handle, 33/64” ID x 1 1/4” OD x 4” Plastic 1
32 P05060 Fitting, 1/4-28 Grease 1
33 F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 3
34 F05011-3 Washer, 3/8” Flat SAE 3
35 046983 Chain, #40 x 82-1/2” Roller 1
36 P04200 Link, #40 Master 2
37 F05011-11 Washer, 1/4” SAE Flat 8
38 F05011-14 Washer, 1/4” Split Lock 6
39 048598 Plate, Pointer Up/Down 1
40 F05005-3 Bolt, 1/4-20 x 1 1/4” Hex Head Full Thread 1
Cap
41 F05010-9 Nut, 1/4-20 Keps 2
42 076108 BRACKET, UP/DOWN CHAIN MOUNT 1
43 F05007-87 BOLT, 3/8-16 X 1” HEX HEAD GRADE 5 3
44 F05011-3 WASHER, 3/8” SAE FLAT 3
45 F05010-10 NUT, 3/8-16 HEX NYLON LOCK 3
046980 IDLER ASSEMBLY, LT15 LOWER UP/DOWN 1
46 015860 Guard Weldment, Chain Tension Sprocket 1
47 015859 Cover, Chain Tension Sprocket Guard 1
48 P04333 Sprocket, #40 Idler 17T 5/8” ID 1
49 F05011-5 Washer, 5/8” SAE Flat 1
50 F05009-1 Bolt, 5/8-11 x 3” Hex Head Full Thread 1
51 F05010-5 Nut, 5/8-11 Hex 1
52 F05010-34 Nut, 5/8-11 Hex Nylon Lock 1
53 046981 Bracket, LT15 Up/Down Chain Tensioner 1
54 F05007-22 Bolt, 3/8-16 x 2” Carriage Head Full Thread 1
55 F05011-3 Washer, 3/8” SAE Flat 1
56 F05010-10 Nut, 3/8-16 Hex Nylon Lock 1
57 F05011-11 Washer, 1/4” SAE Flat 2
58 F05011-14 Washer, 1/4” Split Lock 2
59 F05005-124 Bolt, 1/4-20 x 1 1/2” Hex Head 2

6-6 WM doc 10/6/23 Up/Down System

 Up/Down System
Up/Down Reducer Assembly (Optional) 6
6.4 Up/Down Reducer Assembly (Optional)

22 5
21
6
9 18
19
11 16
3 10
7 17
7
8
2 22
21
15
4 12
1
13
15 20
14
150149-1C

REF PART # DESCRIPTION COMMENTS QTY.

038871 REDUCER KIT, LT15 UP/DOWN Included with D18/D19 or G25 1
engines
1 049371 Plate, Rear Up/Down Reducer 1
2 F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2
3 F05005-18 Bolt, 1/4-20 x 2 3/4” Hex Head 4
4 054610 Guard, Gear Reducer 1
5 049376 Spacer, Plate Mount Long 2
6 054587 Spacer, Plate Mount 2
7 P22317 Bushing, Flanged Bronze 2
8 049394 Spacer, Small Sprocket 1
9 F05012-16 Pin, 3/16” x 1 1/4” Roll 1
10 049377 Shaft, Up/Down Reducer 1
11 F05012-11 Pin, 3/16” x 1” Roll 1
12 049373 Bushing, Gear Mount 1
13 F05012-19 Pin, 3/16” x 7/8” Roll 1
14 049374 Sprocket, 12T Up/Down Reducer Large 3
15 F05005-60 Screw, 1/4-20 x 3/4” Socket Button Head 4
16 049375 Sprocket, 12T Up/Down Reducer Small 3
17 054589 Plate, Small Sprocket Lock 1
18 049395 Plate, 2:1 Up/Down Dial 1
19 054588 Decal, 2:1 Up/Down Dial 1
20 049372 Plate, Front Up/Down Reducer 1
21 F05011-11 Washer, 1/4” SAE Flat 6
22 F05011-14 Washer, 1/4” Split Lock 6

Up/Down System WM doc 10/6/23 6-7

 Up/Down System
6 Up/Down Assist Assembly

6.5 Up/Down Assist Assembly

9 7 6 5 8 7 10

1 11

10
18
22
17
3 23 24
19 20 15
21
12
7 6
20 8 16
2
10
7 9

25 14
13 26

150157-1

REF PART # DESCRIPTION COMMENTS QTY.

046595 ASSIST ASSEMBLY, LT15 UP/DOWN 1
1 055504 Tube Weldment, Upper Assist 1
2 055500 Tube Weldment, Lower Assist 1
3 046982 Spring, Gas Charged 2
038628 Wiper, .542” Gas Spring Rubber 1
4 046978 Block, Upper Spring Mount 2
5 046602 Pulley, Large Cable 1
6 F04254-1 Ring, 1 1/8” Inside Retaining 2
7 046986 Bushing, 3/16” Spacer 4
8 015975 Bearing, R8-2RS 2
9 F05008-146 Bolt, 1/2” x 1” Shoulder 2
10 F05010-10 Nut, 3/8-16 Hex Nylon Lock 3
11 F05005-59 Screw, 1/4-20 x 1/2” Button Socket Head 4
Stainless
12 046995 Pulley, Small Cable 1
13 055505 Block, Lower Spring Mount 1
14 F05006-30 Bolt, 5/16-18 x 2 1/4” Hex Head 2

6-8 WM doc 10/6/23 Up/Down System

 Up/Down System
Up/Down Assist Assembly 6
REF PART # DESCRIPTION COMMENTS QTY.
15 F05010-58 Nut, 5/16-18 Nyl Lock (2) F05010-58 replaced with 1
weldnuts per ECN 37799
2/2021
16 046977 Cable Assembly, Up/Down Assist 1
17 F05010-1 Nut, 3/8-16 Hex 1
18 F05011-3 Washer, 3/8” SAE Flat 2
19 046963 Bracket, LT15 Blade Height Indicator Mount 1
20 F05011-16 Washer, 5/16” Standard Flat 2
21 F05006-27 Bolt, 5/16-18 x 1” Hex Head Grade 5 1
22 017805 Indicator, Blade Height 1
23 F05004-3 Screw, #10-24 x 3/8” Slotted Pan Head 2
24 F05010-14 Nut, #10-24 Hex Self-Locking 2
25 F05011-13 Washer, 5/16 Split Lock Added per ECN 37799 2/2021 2
26 F05011-17 Washer, 5/16” SAE Flat 2

Up/Down System WM doc 10/6/23 6-9

 Feed System & Track Rollers
7 Track Rail, Rollers, & Travel Pins

SECTION 7 FEED SYSTEM & TRACK ROLLERS

7.1 Track Rail, Rollers, & Travel Pins

32 3 2
30 31
28
33
4
29 29
31
27
2 1 4 2
4 7
25
4 26
28
5 24

8 6 13
4

2
9
14
13
10 23

22
21
11

12

18 16 150210-32B
19 15
20
17

REF PART # DESCRIPTION COMMENTS QTY.

1 015846 COVER WELDMENT, TRACK ROLLER 2
2 F05007-27 BOLT, 3/8-16 X 3/4” HEX HEAD 6
3 F05011-4 WASHER, 3/8” SPLIT LOCK 2
4 F05011-3 WASHER, 3/8” SAE FLAT 6
5 014906 PLATE, TRACK WIPER 2
6 F05011-2 WASHER, 1/2” SAE FLAT 1
7 F05007-78 BOLT, 3/8-16 X 1 1/2” HEX HEAD 2
8 110818 COVER, MIDDLE TRACK WITH FELT (See Section 7.2) 1

9 F05007-36 BOLT, 3/8-16 X 1 1/2” SOCKET HEAD 4

10 F04254-2 RING, 5/8” (5100-62) OUTER RETAINING 4
11 P06030-1 BEARING, 5/8” X 1.75” X .47” 4
12 110404 SHAFT, ROLLER UPRIGHT 4
13 P08066 BEARING, .98” X 2.44” X .67” 3
14 F04254-26 RING, 25MM (5100-98) OUTER RETAINING 2

7-1 WM doc 10/6/23 Feed System & Track Rollers

 Feed System & Track Rollers
Track Rail, Rollers, & Travel Pins 7
REF PART # DESCRIPTION COMMENTS QTY.
15 016489 RAIL, PINNED 80.5” LONG BED 2
16 F05007-230 BOLT, 3/8-16 X 2 3/4” HEX HEAD FULL THREAD 24
17 F05010-25 NUT, 3/8-16 HEX LOCK 24
18 014899 PIN, TRAVEL LOCK 2
19 F05012-46 PIN, 1/4” X 2” ROLL 2
20 F05012-16 PIN, 3/16” X 1 1/4” ROLL 2
21 P07997 SPRING, 7/8” O.D. X 1 1/2” COMPRESSION 2
22 S12480 WASHER, 41/64” ID X 1” OD X 3/16” THICK 2
23 F05012-11 PIN, 3/16” X 1” ROLL 2
24 014974 SHAFT, IDLE SIDE ROLLER MOUNT 1
25 F05011-9 WASHER, 1/2” SPLIT LOCK 1
26 F05008-37 BOLT, 1/2-13 X 1 1/4” HEX HEAD GRADE 5 1
074251 BRACKET ASSEMBLY, IDLE WIPER 1
27 F05007-35 Bolt, 3/8-16 x 4 1/2” Hex Head Grade 5 1
28 074270 Felt, Idle Wiper 2
29 074250 Bracket, Left Idle Wiper 2
30 F05010-10 Nut, 3/8-16 Hex Nylon Lock 1
31 F05011-3 Washer, 3/8” SAE Flat 2
32 014897 PLATE, IDLE SIDE GUIDE 1
33 017926 DECAL, LOCK PIN WARNING 2

Feed System & Track Rollers WM doc 10/6/23 7-2

 Feed System & Track Rollers
7 Rail Wiper

7.2 Rail Wiper

5 7 8
4 6
3
1 2

150267-1

REF PART # DESCRIPTION COMMENTS QTY.

110818 Cover Assy, Middle Track 1
110819 Cover Assy, Middle Track Idle LT15 Wide 1
1 F05010-69 Nut, 1/4-20 Nylock 4
2 F05011-11 Washer, 1/4 SAE Flat 4
3 110815 Cover, LT15 Middle Track Use with 110818 1
110816 Cover, LT15 Middle Track Use with 110819 1
4 F05011-3 Washer, 3/8 Flat SAE 2
5 F05007-27 Bolt, 3/8-16x3/4 HH Gr2 2
6 110820 Felt, LT15 Track Wiper 2
7 110783 Retainer, Felt Oiler 2
8 F05005-113 Bolt, 1/4-20x3/4 Carriage 4

7-3 WM doc 10/6/23 Feed System & Track Rollers

 Feed System & Track Rollers
Feed Rope, Pulleys & Brackets 7
7.3 Feed Rope, Pulleys & Brackets

12 1
11
13
2
3 8
4
13
9

5 6
2
7

10 12 3

150125-7D

REF PART # DESCRIPTION COMMENTS QTY.

1 074463 BRACKET, ROPE/STOP 2
2 F05008-10 BOLT, 1/2-13 X 2 1/4” HEX HEAD GRADE 5 2
3 F05010-8 NUT, 1/2-13 HEX NYLON LOCK 2
046979 ROLLER ASSEMBLY, ROPE GUIDE WITH 1
BEARING
4 046838 Roller, 2 1/4” Double Groove Available in assemblies only. 1
5 P06030-1 Bearing, 5/8" I.D. 6203-2NSL 1
6 F04254-8 Ring, 1.575” ID Beveled 5002-156 Retaining 1
7 S12480 Spacer, 41/64” x 1” x 3/16” 1
8 F05009-2 Bolt, 5/8-11 x 2” Hex Head 1
9 F05011-5 Washer, 5/8” SAE Flat 1
10 F05010-34 Nut, 5/8-11 Hex Nylon Lock 1
11 R02080 ROPE, 5/16” DIA. SOLID BRAIDED POLYESTER Add 6 feet for each additional 30ft
bed section.
12 F05011-2 WASHER, 1/2” SAE FLAT 2
13 033911 SPACER, FEED MOUNT BRACKET 2

Feed System & Track Rollers WM doc 10/6/23 7-4

7 Feed System & Track Rollers
Manual Feed Crank Handle

7.4 Manual Feed Crank Handle

1
4
3
5 6

11
7
7
9

2
10

12 16
13 15

18 17 12
13
13 8 150136-1
20 14
19
13

REF PART # DESCRIPTION COMMENTS QTY.

046889 HANDLE ASSEMBLY, LT15 PUSH 1
1 046857 Handle Weldment, LT15 Push 1
2 028390 Grip, Handle 1
3 F05007-123 Bolt, 3/8-16 x 1 1/4” Hex Head Grade 5 2
4 F05011-3 Washer, 3/8” SAE Flat 2
038624 CRANK ASSEMBLY, FEED 2006 1
5 046832 Plate Weldment, Feed Mount 1
6 046854 Pulley Weldment, Feed 1
7 P22317 Bushing, 1/2” x 3/4” Flanged Bronze 2
8 038625 Handle Weldment, Feed 1
9 046976 Bushing, 1/2” x 5/8” x 3/4” Bronze 1
10 F05011-2 Washer, 1/2” SAE Flat 1
11 F05012-16 Pin, 3/16” x 1 1/4” Roll 1
12 F05010-69 Nut, 1/4-20 Hex Nylon Lock 2
13 F05011-11 Washer, 1/4” SAE Flat 5
14 038623 Bracket, Feed Handle Lock 1
15 F05005-68 Bolt, 1/4-20 x 1 3/4” Hex Head Grade 5 1
16 049364 Spring, .6” Dia. x 1” Long x .045” Wire Com- 1
pression
17 046867 Plate, Lock Handle Release 1
18 046647 Handle, 33/64” x 1 1/4” x 4” Plastic 1
19 F05005-163 Bolt, 1/4-20 x 6” Hex Head Grade 5 1
20 036597 Bearing, 1/2” ID x 1” OD x 1/16” Bronze Thrust 1

7-5 WM doc 10/6/23 Feed System & Track Rollers

 Bed Frame Assembly
Log Wedge, Loading Ramps, & Cant Hook (Optional) 8
SECTION 8 BED FRAME ASSEMBLY
8.1 Log Wedge, Loading Ramps, & Cant Hook (Optional)

2 5 7
3
1
13
9
14 6

4
16
8
15
11
12
10

150056D

REF PART # DESCRIPTION COMMENTS QTY.

LT15OP KIT, OPTIONAL PACKAGE LT15
015809 WEDGE ASSY, LOG TAPER 1
1 015807 Plate, LT15 Wedge Available in assemblies only. 2
2 007073 Bracket, LT15 Wedge (LT15BS Rev. Available in assemblies only. 1
G.00+)
3 015808 Bracket, LT15 Wedge Bed Spacer Available in assemblies only. 1
(LT15BS Rev. A.00 - F.00)
4 F05007-73 Bolt, 3/8-16 x 3” Hex Head Grade 5 2
5 F05010-10 Nut, 3/8-16 Hex Nylon Lock 2
015804 RAMP ASSY, LOG LOADING 2
6 015803 Ramp Weldment, Log Loading Available in assemblies only. 1
7 S08329 Bracket, Log Loading Stop 6
8 F05007-1 Bolt, 3/8-16 x 3” Hex Head Full Thread 1
9 F05010-10 Nut, 3/8-16 Hex Nylon Lock 7
10 P04060 Spring, .563” O.D. x .072” x 5” Extension 12
11 F05007-29 Bolt, 3/8-16 x 2 3/4” Hex Head 6
12 CH048 HOOK, ALUMINUM HANDLE CANT 1
CH HOOK, WOOD HANDLE CANT Not shown 1
074403 WEDGE ASSEMBLY, LOG TAPER LT15 WIDE Included with LT15 Wide 1
13 015807 Plate, LT15 Wedge Available in assemblies only. 2
14 007073 Bracket, LT15 Wedge (LT15BS Rev. G.00+) Available in assemblies only. 1
15 F05007-73 Bolt, 3/8-16 x 3” Hex Head Grade 5 2
16 F05010-10 Nut, 3/8-16 Hex Nylon Lock 2

Bed Frame Assembly WM doc 10/6/23 8-1

 Bed Frame Assembly
8 Bed Section & Connecting Hardware

8.2 Bed Section & Connecting Hardware

2 8
1 5

10
6

3 9
7
4

11 150064F

REF PART # DESCRIPTION COMMENTS QTY.

LT15BS BED ASSEMBLY, 6’-8” LT15 EXTENSION 2
1 016170 Splice Assembly, Pinned Bed Rail 1
2 F05007-87 Bolt, 3/8-16 X 1” Grade 5 Hex Head 2
3 F05008-66 Bolt, 1/2-13 X 5” Grade 5 Hex Head 4
4 F05010-8 Nut, 1/2-13 Hex Nylon Lock 4
5 016489 Rail, Pinned 80.5” Long Bed 1
6 S09851 Decal, Keep Away Danger 1
7 F05007-230 Bolt, 3/8-16 x 2 3/4” Hex Head Full Thread 8
8 F05010-25 Nut, 3/8-16 Swaged Lock 8
9 110790 Plate, Outrigger Nut Added after 5/19. 4
10 See Parts Side Support Parts (See Section 8.4) 1
11 See Parts Leg Parts (See Section 8.3) 4
See Parts Lock Pin Retrofit Parts (See Section 7.1) 1

8-2 WM doc 10/6/23 Bed Frame Assembly

 Bed Frame Assembly
Leg Assembly 8
8.3 Leg Assembly

150125-1B

REF PART # DESCRIPTION COMMENTS QTY.

1 046615 LEG WELDMENT, LT15 2004 4
2 F05010-186 NUT, 7/8-9 SQUARE 4
3 F05010-136 NUT, 7/8-9 HEX 4

Bed Frame Assembly WM doc 10/6/23 8-3

8 Bed Frame Assembly
Log Side Support Assembly

8.4 Log Side Support Assembly

10

1
8 12
9

1 6

6 4
5 3
5 2
11
4
3
2

7 150020D

REF PART # DESCRIPTION COMMENTS QTY.

1 F05008-28 BOLT, 1/2-13 X 5 1/2” HEX HEAD CAP GRADE 5 2
2 014972 WASHER, 33/64 X 1 3/4 X 1/32” NYLON 2
3 025767 WASHER, 1/2” LOG SIDE SUPPORT 2
4 F05012-7 PIN, 1/4 X 1” ROLL 2
5 F05007-168 BOLT, 3/8-16 X 3/4” HEX HEAD GRADE 5 2
W/NYLON PATCH
6 014855 SUPPORT, LOG SIDE 2
7 F05010-3 NUT, 1/2-13 HEX LOCK 2
074276 ROLLER ASSEMBLY, LT15 SIDE SUPPORT 1
8 016561 Roller, Side Support 2
9 016560 Bushing, Bronze 5/8” x 1” x 3/4” 2
10 F05009-93 Bolt, 5/8-11 x 3 1/2” Hex Head Grade 5 1
11 F05010-96 Nut, 5/8-11 Jam Nylon Lock 1
12 F05011-5 Washer, 5/8” SAE Flat 4

8-4 WM doc 10/6/23 Bed Frame Assembly

 Bed Frame Assembly
Log Clamp 8
8.5 Log Clamp

9 2
6
4

6
5

8 1 9

150227C

REF PART # DESCRIPTION COMMENTS QTY.

065661 CLAMP ASSEMBLY, LT10/15 RETRO 1
071347 Clamp Assembly, LT10/LT15 Log Pivoting Available in assemblies only. 1
1 071026 Tube, 2012 Clamp Main 1
061101 Clamp Kit, LT10/LT15 1
2 071343 Tube Weldment, Clamp Post Available in assemblies only. 1
3 071350 Screw Assembly, Clamp 1
4 075295 Block, Clamp Point 1
5 071034 Spacer, 2012 Clamp Mount 2
6 F05007-109 Bolt, 3/8-16 x 4 3/4” Hex Head Grade 5 Not used for LT15 2
7 F05010-10 Nut, 3/8-16 Hex Nyloc 2
8 F05011-3 Washer, 3/8” Flat SAE 4
9 F05007-205 Bolt, 3/8-16 x 6 1/2” Hex Head Grade 5 2
F05007-45 Screw, 3/8-16 x 6" Hex Head 2
065661-1784 Instruction Sheet, LT10/15 Log Clamp 1

Bed Frame Assembly WM doc 10/6/23 8-5