QUICK START
1. Unpacking and Installation 2. Display and keyboard
Remove terminal
from pack along with Stable weight Center zero
the CD containing
the instructions.
Tare entered
Tare
via keyboard
D400 Gross weight
Gross weight
in pounds
Minimum
Net weight
A C F weight
Connect in Below-range
Weighing range
sequence. weight indica-
indication
A. Weighing plat- tion
WEIGHING TERMINAL
form.
B Within-range Above-range
B. Any peripheral
weight indica- weight indica-
equipment used
tion tion
(e.g.: print-
D E
ers, additional
displays, etc.).
F A B C. Optional outputs Tare entry and
Weight reset
(e.g.: Ethernet, cancellation
* WI-FI, I/O, BCD,
R232/422/485). Printing and/or
Tare entry and
D. Analog output. transmission
display
E. I/O connection. start
F. Mains power
* socket. Check Customizable I on
voltage value on
data plate.
keys O off
85-265 Vac
50/60 Hz
Press button I to
Code 81320341 - 1/1/2010
turn the terminal
on.
Press button O to
ENGLISH
turn the terminal
ON/OFF
off.
* Not included
DECLARATION OF CONFORMITY
N° D400_100101
3. Weighing with tare entry 4. Menu browsing
SOCIETÀ COOPERATIVA BILANCIAI A.R.L.
We: Via S. Ferrari, 16
41011 Campogalliano (MO)- Italy
hereby declare under our responsibility that
1 Allowthe user to browse in the program-
ming menus
the product: Electronic weighing terminal D400 Reset the terminal.
and its optional equipment Accesses the menu. The next item
required is selected with the other keys.
described in this declaration conforms to the following Up to 6 functions are available on the
2°F shortcut key bar.
Directive EMC 2004/108/EEC
directives: Electrical Safety Directive 2006/95/EC ENTER Confirm the data item entered
Weighing Instrument Directive 2009/23/EEC 2
Load the empty container Up, down, right and left
Conformity is guaranteed by compliance with the following (tare)
Selects the required item or accesses a
EN 61000-6-3, EN 61000-6-4 SELEC submenu
standards: EN 60950
EN 45501 # \\ Unabbreviated path, path given in numbers
The terminal is also suitable for the creation of non-automatic weigh- 3 Goes back to the previous menu level
ing instruments approved with the "CE Type Approval Certificate" in ESC Press twice to go back to the weight display
conformance with the requirements of Directive 2009/23/EEC (for- mode
merly 90/384). Acquire the tare
The product bears CE marking.
1-1-2010
Campogalliano, this day ............................
5. Setup
Division Management
Franco Brighenti
4 Main menu items ...>MENU>...
WARNINGS Load the product
>Contrast Adjusts the contrast
Do not install in places with potentially explosive gas or
dust; >Data management>Date Time Adjusts the date and time
• This electrical or electronic device cannot be disposed of
as solid urban waste.
5 >Display (DISPL) Character height and display type setup
>Data management>Set Point Settings
• It must be disposed of separately.
Read the net weight
>Data management>Range Settings
Consult the Operation, Maintenance and Installation instruc-
tions in the CD for further information.
SOCIETÀ COOPERATIVA
BILANCIAI
Weighing Instruments and Technologies
6
Print or transmit the data to
Società Cooperativa Bilanciai Campogalliano - 41011 Campogalliano (MO) Italy the PC
Via S. Ferrari, 16 - Tel. +39 (0)59 893 611 - Fax +39 (0)59 527 079
Web: http://www.coopbilanciai.it - E-mail:cb@coopbilanciai.it
Customer Assistance Service Tel. +39 (0)59 893 612 - Fax +39 (0)59 527 294
