MAF MAF CLOTHING PVT LTD
PP MEETING( ) / PILOT RUN( ) / INLINE( ) / MID( ) / INTERNAL( ) INSPECTION REPORT
AA)General Information
Factory Buyer : Date
P.O No Style Description : Colour
Style No Size Ranges : Size Involved
Order Qty : Name :
BB)Production Details
Dyeing Cutting Printing Embroidery Sewing Washing Ironing Packing
CC)Technical Details
Main Label Odur/Smell Snap/Revert Stitch Per Inch (13-14)
Size Label Wash Appearence Data Sheet Side Seam
Barcode/Tickets Hand Feel Pinch Setting Hem
Care Label Ironing Sharp Edge Sleeve
Flag Label Folding Linning Pocket
Emb Thread Packing Button Pull Test PK Material
Emb Art Work Stripe Matching Carton Marking Onsite Test
Emb Grading Zipper Needle Detection Neck Stretch
Shade/Dye Lots Button Size/Color Bar Tacking Carton Quality
Others Fabric Composition GSM Req/Found /
DD) Inspection Standard
LOT SIZE 281-500 501-1200 1201-3200 3201-10000 10001-35000 35001-150000
MIL STD 105D /
AQL 2.5
SAMPLE / MAJOR / 20 / 01 / 02 32 / 02 / 03 50 / 03 / 05 80 / 05 / 07 125 / 07 / 10 200 / 07 / 10
MINOR
Sample Size
EE)OBSERVATIONS
S NO DEFECTS DESCRIPTION CRITICAL MAJOR MINOR
Defects Observed
Defects Allowed
FF)CORRECTIVE ACTION
GG)Critical Measurements Checked Yes ( ) No ( ) Measurements Within Tolerance Limit ( ) Without Tolerance Limit( )
Result
RE - Inspection
Accepted Rejected Required
Factory Representative Auditor Signautre Quality Manager Signature
MAF MAF CLOTHING (P) LTD
MEASUREMENT CONTROL CHART
P.O No:..................................... Style No:……………………………… Factory:………………………………………… Style Description:……………………………………………………… Date:………………..
Inspection Type PPS ( ) SIZE SET ( ) PILOT RUN ( ) INLINE ( ) PRE-FINAL ( ) FINAL ( ) SHIPMENT SAMPLE ( )
Tol+/ Spec Spec Spec Spec Spec Spec Spec
Measurement points - size size size size size size size
*Measurements taken in CM/INCH On the flat, PASS FAIL
Vendor's Authorised Co ordinator Signature Inspector's Signature
Page off
MAF CLOTHING (P) LTD
MAF SAMPLE CHECK LIST REPORT
AA)Proto Sample Please Tick Below ( ü)
Fit ( ) Size Set ( ) PPS ( ) Shipment ( ) Top sample ( )
BB)General Information
Factory : Date :
Buyer : Size Involved :
Style No : Sample size:
Style description :
CC) Material
Fabric Bulk( ) Sub( ) Fabric Color Bulk( ) Sub( ) Req Gsm Act Gsm
Trims Bulk( ) Sub( ) Trim Color Bulk( ) Sub( )
DD) Material Treatment
Garment Treatment( ) Fabric Treatment ( ) RFD + Cpl Wash ( )
EE)Details Of Material
Items Details Ok Not Ok Available Items Details Ok Not Ok Available
Quality Quality
Colour Colour
Fabric Trims
Hand Feel Placement
Treatment Wash care
Quality Quality
Print / Colour Colour
Embro
Fusing Design Design
Placement Placement
Quality Color
Colour Handfeel
Studs Spray
Design Pilling
Placement Effect
FF)WORKMANSHIP Matched to Last Fit sample + PP Sample Comments Yes ( ) No ( )
GG)QC( ) OR QA ( ) COMMENTS
HH)Critical Check Points ( Do Mock Ups)
II)PATTERN :If Correction Required, Yes( ) No( ) MEASUREMENTS Yes No
Within Tolerance Limit
1) The Above Is Approved with correction
2)The Above Is Not Approved , Please Remake
Audited by Reviewed By
Final Inspection Report MIS
AA)General Information Division of Product : Textiles(Knitted)
Factory : Customer :
Inspection Type : Inspector(s) :
P O (S) : Inspection Date :
Style Description : Style No :
AQL
ANSI/ASQ Z1.4-
2008,MIL STD Level I
Major Sampling Plan
105E Crictal Minor Level II
Level III Single
0.0 2.5 4.0 Double
BB) Inspection Categories Pass Fail Remarks
Style,Material,Color
Workmanship, Presentation
Handfeel, Odour,Moisture
Care Label,Tickets, Badge & trims
Packing Audit
Critical path of the product & Metal Detection
Measurements
Test Report (s)
Shipping Marks,Carton barcode sticker,Labelling
cc) Goods Condition Loose condition Partially packed 100% Packed
Offered Carton Order Quantity Sample size
Inspected Carton Offered Quantity Colour(s)
DD)GSM: Required : Actual : Result: Tolerance: + / - 5 %
Fabric 1
Fabric 2
Carton No(s)
Inspected Carton No(s)
Over All Conclusion : Pass Fail Hold Page 1 of ________
MIS
EE) Workmanship & Presentation
S.No Defects description Critical Major Minor
Total Defects Observed
Total Defects Allowed
Result Of Workmanship Pass Fail
FF) Packing Audit
Assortment( Size/ Colour) Pass Fail
GG) Onsite Test
Neck or waist Stretch/Button/Beads/Sequence/
Pass Fail
Badge/Print or other embellishments
HH) Needle Detection ------ Pcs/set Pass Fail Not Available
II) Remarks
jj) After Appearance wash test (3'rd wash) for Shrinkage & colour fastness( Maf Lab)
Pass Fail Not Available
Supplier's Authorised Co- Ordinator's Signature Inspector's Signature
This inspection was carried out by us or our QA personal on a randam sampling basis. The results of
inspection, however, do not release the vendor from their responsibility in the event of clients and / or
Complaints from the customer, who will exercise ultimate acceptence of goods upon receipt of search at
destination.
Maf Inspection Services Page ---- of -----
MEASUREMENT RECORD MIS
Order No:……………………………… Factory:………………………………………… Style Description:……………………………………………………… Date:………………..
Tol+
/- Spec Spec Spec Spec Spec Spec Spec
Measurement points size size size size size size size
Total no of points measured : Points (Key mmts only for Final Inspection)
Total no of fault measurement allowed (Knitted 10% & Woven 5% ) : Points
Total no of Fault measurements observed : Points
*Measurements taken in CM/INCH On the flat, Conclusion of the Measurements PASS FAIL
Vendor's Authorised Co ordinator Signature Inspector's Signature
Page off
MEASUREMENT RECORD MIS
Order No:……………………………… Factory:………………………………………… Style Description:……………………………………………………… Date:………………..
Tol+
/- Spec Spec Spec Spec Spec Spec Spec
Measurement points size size size size size size size
Length
Chest
Hem
Shoulder
Sleeve Length
Armhole Straight
Sleeve Opening
Back Neck Width
F.N.D
Min Neck Stretch
Total no of points measured : Points (Key mmts only for Final Inspection)
Total no of fault measurement allowed (Knitted 10% & Woven 5% ) : Points
Total no of Fault measurements observed : Points
*Measurements taken in CM/INCH On the flat, Conclusion of the Measurements PASS FAIL
Vendor's Authorised Co ordinator Signature Inspector's Signature
Page off
