SPECIFICATIONS

ENGINE CONTROL
Maker / Model CUMMINS QSB6.7 Engine Pilot pressure operated joysticks and pedals with detachable lever provide almost
Type Water-cooled, 4-cycle diesel, 6-cylinder in- effortless and fatigueless operation.
line, Direct injection, Turbocharged, Charge Two joysticks with one safety lever
air cooled, Low emission Pilot control (LH): Swing and arm
J1995 (gross) 136 kW (183 HP) at 1,950 rpm (RH): Boom and bucket (ISO)
Rated SAE
J1349 (net) 129 kW (173 HP) at 1,950 rpm Traveling and steering Two levers with pedals
flywheel
horse 6271/1 (gross) 136 kW (185 PS) at 1,950 rpm Engine throttle Electric, Dial type
power DIN
6271/1 (net) 129 kW (175 PS) at 1,950 rpm
Max. torque 81.6 kgf (590 lbf.ft) at 1,500 rpm
SWING SYSTEM
Bore × stroke 107 × 124 mm (4.2’’ x 4.9’’) Swing motor Fixed displacement axial piston motor

Piston displacement 6,700 cc (409 cu in) Swing reduction Planetary gear reduction

Batteries 2 × 12 V × 100 Ah Swing bearing lubrication Grease-bathed

Starting motor 24 V - 4.8 kW Swing brake Multi wet disc

Alternator 24 V - 95 A Swing speed 10,8 rpm

HYDRAULIC SYSTEM SERVICE REFILL CAPACITIES

Re-filling liter US gal UK gal
MAIN PUMP
Fuel tank 320 84.5 70.4
Variable displacement tandem axis piston
Type Engine coolant 40 10.6 8.8
pumps
Max. flow 2 × 222 ℓ/min (58.6 US gpm / 48.8 UK gpm) Engine oil 23.7 6.3 5.2
Sub-pump for pilot circuit Gear pump Swing device 7 1.8 1.5
Final drive (each) 4.5 1.2 1.0
Cross-sensing and fuel saving pump system
Hydraulic system (including tank) 275 72.6 60.5
HYDRAULIC MOTORS
Hydraulic tank 160 42.3 35.2
Two speed axial pistons motor with
Travel DEF/AdBlue® tank 27 7.1 5.9
brake valve and parking brake
Swing Axial piston motor with automatic brake
UNDERCARRIAGE
RELIEF VALVE SETTING The X-leg type center frame is integrally welded with reinforced box-section track
Implement circuits 350 kgf/cm2 (4,980 psi) frames. The undercarriage includes lubricated rollers, idlers, track adjusters with
shock absorbing springs and sprockets and a track chain with double or triple
Travel 350 kgf/cm2 (4,980 psi)
grouser shoes.
Power boost (boom, arm, bucket) 380 kgf/cm2 (5,410 psi)
Center frame X - leg type
Swing circuit 285 kgf/cm2 (4,050 psi)
Track frame Pentagonal box type
Pilot circuit 40 kgf/cm (570 psi)
2

No. of shoes on each side 49 EA

Service valve Installed
No. of carrier roller on each side 2 EA
HYDRAULIC CYLINDERS No. of track roller on each side 9 EA
Boom: 2-120 x 1,290 mm No. of rail guard on each side 2 EA
Arm: 1-140 x 1,510 mm

No. of cylinder
Bucket: 1-120 × 1,055 mm OPERATING WEIGHT (APPROXIMATE)
bore × stroke Dozer Blade: 2-130 × 240 mm Operating weight, including 5,680 mm (18’ 8’’) boom; 2,920 mm (9’ 7’’) arm;
2-Piece Boom: SAE heaped 0.80 m3 (1.05 yd3) bucket, lubricant, coolant, full fuel tank,
1st: 2-125 x 1,260 mm full hydraulic tank and all standard equipments.
2nd: 1-160 x 1,060 mm
OPERATING WEIGHT
Shoes Operating weight Ground pressure
DRIVES & BRAKES
Width
Drive method Fully hydrostatic type Type kg (lb) kgf/cm2 (psi)
mm (in)
Drive motor Axial piston motor, in-shoe design 600 (24’’) 24,000 (52,910) 0.51 (7.25)
Reduction system Planetary reduction gear 700 (28’’) 24,280 (53,530) 0.44 (6.26)
Triple
Max. drawbar pull 20,500 kgf (45,194 lbf) grouser 800 (32’’) 24,560 (54,140) 0.39 (5.55)
Max. travel speed (high / low) 5.5 km/hr (3.5 mph) / 3.3 km/hr (2.1 mph) 900 (36’’) 24,840 (54,760) 0.35 (4.98)
Gradeability 35° (70%)
Parking brake Multi wet disc

1
BUCKET SELECTION
GUIDE & DIGGING FORCE

BUCKETS
All buckets are welded with high-strength steel.

SAE heaped 0.51 (0.67) 0.80 (1.05) 1.10 (1.44) 1.34 (1.75) 0.74 (0.97) 0.87 (1.14) 0.75 (0.98)
m3 (yd3) 0.87 (1.14) 1.20 (1.57) 0.90 (1.18)
0.92 (1.20) 1.05 (1.37)

Recommendation mm (ft.in)
Capacity Width
m3 (yd3) mm (in) 5,680 (18’ 8’’) 5,650 (18’ 6’’)
Weight Mono-boom 2-Piece boom
kg (lb)
2,000 2,400 2,920 2,000 2,400 2,920
SAE CECE Without With
(6’ 7’’) (7’ 10’’) (9’ 7’’) (6’ 7’’) (7’10’’) (9’ 7’’)
heaped heaped side cutters side cutters
Arm Arm Arm Arm Arm Arm
0.51 (0.67) 0.45 (0.59) 700 (27.6) 820 (32.3) 570 (1,260)
0.80 (1.05) 0.70 (0.92) 1,000 (39.4) 1,120 (44.1) 700 (1,540)
0.87 (1.14) 0.75 (0.98) 1,090 (42.9) 1,210 (47.6) 740 (1,630)
0.92 (1.20) 0.80 (1.05) 1,150 (45.3) 1,270 (50.0) 770 (1,700)
1.10 (1.44) 0.96 (1.26) 1,320 (52.0) 1,440 (56.7) 830 (1,830)
1.20 (1.57) 1.00 (1.31) 1,400 (55.1) 1,520 (59.8) 850 (1,870) - -
1.34 (1.75) 1.15 (1.50) 1,550 (61.0) 1,670 (65.7) 920 (2,030) - - -
0.74 (0.97) 0.65 (0.85) 985 (38.8) - 770 (1,700)
0.90 (1.18) 0.80 (1.05) 1,095 (43.1) - 810 (1,790)
1.05 (1.37) 0.92 (1.20) 1,290 (50.8) - 890 (1,960)
0.87 (1.14) 0.75 (0.98) 1,140 (44.9) - 900 (1,980)
0.75 (0.98) 0.65 (0.85) 1,790 (70.5) - 880 (1,940)

Heavy duty bucket : Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less
Rock-Heavy duty bucket : Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less
Slope finishing bucket : Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less

ATTACHMENT
Booms and arms are welded with a low-stress, full-box section design.
5.68 m (18’ 8’’) Mono-boom and 5.65 m (18’ 6’’) 2-Piece boom and 2.0 m (6’ 7’’); 2.4 m (7’ 10’’) & 2.92 m (9’ 7’’) Arms are available.

DIGGING FORCE
Length mm (ft.in) 2,000 (6’ 7’’) 2,400 (7’ 10’’) 2,920 (9’ 7’’)
Arm Remarks:
Weight kg (lb) 975 (2,150) 1,045 (2,300) 1,095 (2,410)
kN 133.4 [144.8] 133.4 [144.8] 133.4 [144.8]
SAE kgf 13600 [14770] 13600 [14770] 13600 [14770]
Bucket lbf 29980 [32550] 29980 [32550] 29980 [32550]
digging
force kN 152.0 [165.0] 152.0 [165.0] 152.0 [165.0]
ISO kgf 15500 [16830] 15500 [16830] 15500 [16830]
lbf 34170 [37100] 34170 [37100] 34170 [37100] [ ]:
Power
kN 144.2 [156.5] 119.6 [129.9] 102.0 [110.7] Boost
SAE kgf 14700 [15960] 12200 [13250] 10400 [11290]
Arm lbf 32410 [35190] 26900 [29210] 22930 [24900]
crowd
force kN 151.0 [164.0] 125.5 [136.3] 106.9 [116.1]
ISO kgf 15400 [16720] 12800 [13900] 10900 [11830]
lbf 33950 [36860] 28220 [30640] 24030 [26090]

Note : Arm weight includes bucket cylinder, linkage and pin

2
DIMENSIONS &
WORKING RANGE

HX235 LCR DIMENSIONS

5.68 m (18’ 8’’) Mono-boom and 2.0 m (6’ 7’’), 2.4 m (7’ 10’’) & 2.92 m (9’ 7’’) Arm.

D, D' E

J N F
HX235 LCR

C
G
A H
B K
I L

Unit : mm (ft·in)

A Tumbler distance 3,650 (12’ 0’’) 5,680

Boom length
B Overall length of crawler 4,404 (14’ 6’’) (18’ 8’’)

C Ground clearance of counterweight 1,080 (3’ 7’’) 2,000 2,400 2,920

Arm length
(6’ 7’’) (7’ 10’’) (9’ 7’’)
D Tail swing radius 1,780 (6’ 04’’)
9,040 8,950 8,910
D’ Rear-end length 1,780 (6’ 04’’) I Overall length
(29’ 8’’) (29’ 4’’) (29’ 3’’)
E Overall width of upperstructure 2,980 (9’ 9’’) 3,200 3,100 3,020
J Overall height of boom
F Overall height of cab 3,100 (10’ 2’’) (10’ 6’’) (10’ 2’’) (9’ 11’’)
G Min. ground clearance 480 (1’ 7’’)
600 700 800 900
H Track gauge 2,390 (7’ 10’’) K Track shoe width
(24’’) (28’’) (32’’) (36’’)
N Overall height of guardrail 3,290 (10’ 10’’) 2,990 3,090 3,190 3,290
L Overall width
(9’ 10’’) (10’ 2’’) (10’ 6’’) (10’ 10’’)

HX235 LCR WORKING RANGE

A Unit : mm (ft·in)

A' 5,680
Boom length
(18’ 8’’)
F
2,000 2,400 2,920
Arm length
(6’ 7’’) (7’ 10’’) (9’ 7’’)

9,040 9,430 9,910

A Max. digging reach
(29’ 8’’) (30’ 11’’) (32’ 6’’)

D Max. digging reach 8,860 9,260 9,750

A’
on ground (29’ 1’’) (30’ 5’’) (32’ 0’’)

5,780 6,180 6,700

E B Max. digging depth
(19’ 0’’) (20’ 3’’) (22’ 0’’)

Max. digging depth 5,550 5,980 6,530

B’
(8’ level) (19’ 0’’) (19’ 7’’) (21’ 5’’)
HX235 LCR

Max. vertical wall 5,140 5,710 6,270

C
digging depth (16’ 10’’) (18’ 9’’) (20’ 7’’)

10,090 10,420 10,830

D Max. digging height
(33’ 1’’) (34’ 2’’) (35’ 6’’)

B' C 7,190 7,510 7,890

B E Max. dumping height
(23’ 7’’) (24’ 8’’) (25’ 11’’)

2,860 2,550 2,350

F Min. front swing radius
(9’ 5’’) (8’ 4’’) (7’ 9’’)

3
DIMENSIONS &
WORKING RANGE

HX235 LCR (DOZER TYPE) DIMENSIONS

5.68 m (18’ 8’’) Mono-boom and 2.0 m (6’ 7’’), 2.4 m (7’ 10’’) & 2.92 m (9’ 7’’) Arm.

D, D' E

J P F
HX235 LCR

C
O M G
N
A H
B K
I L

Unit : mm (ft·in)

A Tumbler distance 3,650 (12’ 0’’) 5,680

Boom length
B Overall length of crawler 4,404 (14’ 6’’) (18’ 8’’)

C Ground clearance of counterweight 1,080 (3’ 7’’) 2,000 2,400 2,920

Arm length
(6’ 7’’) (7’ 10’’) (9’ 7’’)
D Tail swing radius 1,780 (6’ 04’’)
10,020 9,930 9,890
D’ Rear-end length 1,780 (6’ 04’’) I Overall length
(32’ 10’’) (32’ 7’’) (32’ 5’’)
E Overall width of upperstructure 2,980 (9’ 9’’) 3,200 3,100 3,020
J Overall height of boom
F Overall height of cab 3,100 (10’ 2’’) (10’ 6’’) (10’ 2’’) (9’ 11’’)
G Min. ground clearance 480 (1’ 7’’)
600 700 800 900
H Track gauge 2,390 (7’ 10’’) K Track shoe width
(24’’) (28’’) (32’’) (36’’)
M Ground clearance of blade up 550 (1’ 10’’) 2,990 3,090 3,190 3,290
L Overall width
N Depth of blade down 410 (1’ 4’’) (9’ 10’’) (10’ 2’’) (10’ 6’’) (10’ 10’’)
O Height of blade 740 (2’ 5’’)
P Overall height of guardrail 3,290 (10’ 10’’)

HX235 LCR (DOZER TYPE) WORKING RANGE

A Unit : mm (ft·in)

A'
Boom length 5,680 (18’ 8’’)
F
2,000 2,400 2,920
Arm length
(6’ 7’’) (7’ 10’’) (9’ 7’’)

9,040 9,430 9,910

A Max. digging reach
(29’ 8’’) (30’ 11’’) (32’ 6’’)

Max. digging reach 8,860 9,260 9,750

D A’
on ground (29’ 1’’) (30’ 5’’) (32’ 0’’)

5,780 6,180 6,700

E B Max. digging depth
(19’ 0’’) (20’ 3’’) (22’ 0’’)

Max. digging depth 5,550 5,980 6,530

B’
(8’ level) (18’ 3’’) (19’ 7’’) (21’ 5’’)

Max. vertical wall 5,140 5,710 6,270

HX235 LCR

C
digging depth (16’ 10’’) (18’ 9’’) (20’ 7’’)

10,090 10,420 10,830

D Max. digging height
(33’ 1’’) (34’ 2’’) (35’ 6’’)

7,190 7,510 7,890

B B' C E Max. dumping height
(23’ 7’’) (24’ 8’’) (25’ 11’’)

2,860 2,550 2,350

F Min. front swing radius
(9’ 5’’) (8’ 4’’) (7’ 9’’)

4
DIMENSIONS &
WORKING RANGE

HX235 LCR 2-PIECE BOOM DIMENSIONS

5.65 m (18’ 6’’) 2-Piece Boom and 2.0 m (6’ 7’’), 2.4 m (7’ 10’’) & 2.92 m (9’ 7’’) Arm.

D, D' E

J N F
HX235 LCR

C
G
A H
B K
I L

Unit : mm (ft·in)

A Tumbler distance 3,650 (12’ 0’’) Boom length 5,650 (18’ 6’’) 2-Piece
B Overall length of crawler 4,404 ( 14’ 6’’) 2,000 2,400 2,920
Arm length
C Ground clearance of counterweight 1,080 (3’ 7’’) (6’ 7’’) (7’ 10’’) (9’ 7’’)

D Tail swing radius 1,780 (6’ 04’’) 9,000 8,910 8,900

I Overall length
(29’ 6’’) (29’ 3’’) (29’ 2’’)
D’ Rear-end length 1,780 (6’ 04’’)
3,050 3,000 2,990
E Overall width of upperstructure 2,980 (9’ 9’’) J Overall height of boom
(10’ 0’’) (9’ 10’’) (9’ 10’’)
F Overall height of cab 3,100 (10’ 2’’)
600 700 800 900
G Min. ground clearance 480 (1’ 7’’) K Track shoe width
(24’’) (28’’) (32’’) (36’’)
H Track gauge 2,390 (7’ 10’’)
2,990 3,090 3,190 3,290
N Overall height of guardrail 3,290 (10’ 10’’) L Overall width
(9’ 10’’) (10’ 2’’) (10’ 6’’) (10’ 10’’)

HX235 LCR 2-PIECE BOOM WORKING RANGE

A Unit : mm (ft·in)
A'
Boom length 5,650 (18’ 6’’) 2-Piece
F
2,000 2,400 2,920
Arm length
(6’ 7’’) (7’ 10’’) (9’ 7’’)

9,050 9,460 10,020

A Max. digging reach
(29’ 8’’) (31’ 0’’) (32’ 10’’)

Max. digging reach 8,880 9,290 9,860

A’
on ground (29’ 2’’) (30’ 6’’) (32’ 4’’)
D 5,460 5,860 6,380
B Max. digging depth
(17’ 11’’) (19’ 3’’) (20’ 11’’)
E Max. digging depth 5,340 5,750 6,270
B’
(8’ level) (17’ 6’’) (18’ 10’’) (20’ 7’’)

Max. vertical wall 4,530 4,970 5,520

C
digging depth (14’ 10’’) (16’ 4’’) (18’ 1’’)
HX235 LCR

10,600 10,990 11,470

D Max. digging height
(34’ 9’’) (36’ 1’’) (37’ 8’’)

7,680 8,090 8,540

E Max. dumping height
C (25’ 2’’) (26’ 7’’) (28’ 0’’)
B B'
2,130 2,030 2,000
F Min. front swing radius
(7’ 0’’) (6’ 8’’) (6’ 7’’)

8ft

5
DIMENSIONS &
WORKING RANGE

HX235 LCR 2-PIECE BOOM (DOZER TYPE) DIMENSIONS

5.65 m (18’ 6’’) 2-Piece Boom and 2.0 m (6’ 7’’), 2.4 m (7’ 10’’) & 2.92 m (9’ 7’’) Arm.

D, D' E

J P F
HX235 LCR

C
OM G
N
A H
B K
I L

Unit : mm (ft·in)

A Tumbler distance 3,650 (12’ 0’’) Boom length 5,650 (18’ 6’’) 2-Piece
B Overall length of crawler 4,404 ( 14’ 6’’) 2,000 2,400 2,920
Arm length
C Ground clearance of counterweight 1,080 (3’ 7’’) (6’ 7’’) (7’ 10’’) (9’ 7’’)

D Tail swing radius 1,780 (6’ 04’’) 9,850 9,760 9,750

I Overall length
(32’ 4’’) (32’ 0’’) (32’ 0’’)
D’ Rear-end length 1,780 (6’ 04’’)
3,050 3,000 2,990
E Overall width of upperstructure 2,980 (9’ 9’’) J Overall height of boom
(10’ 0’’) (9’ 10’’) (9’ 10’’)
F Overall height of cab 3,100 (10’ 2’’)
600 700 800 900
G Min. ground clearance 480 (1’ 7’’) K Track shoe width
(24’’) (28’’) (32’’) (36’’)
H Track gauge 2,390 (7’ 10’’)
2,990 3,090 3,190 3,290
M Ground clearance of blade up 550 (1’ 10’’) L Overall width
(9’ 10’’) (10’ 2’’) (10’ 6’’) (10’ 10’’)
N Depth of blade down 410 (1’ 4’’)
O Height of blade 740 (2’ 5’’)
P Overall height of guardrail 3,290 (10’ 10’’)

HX235 LCR 2-PIECE BOOM (DOZER TYPE) WORKING RANGE

A Unit : mm (ft·in)
A'
Boom length 5,650 (18’ 6’’) 2-Piece
F
2,000 2,400 2,920
Arm length
(6’ 7’’) (7’ 10’’) (9’ 7’’)

9,050 9,460 10,020

A Max. digging reach
(29’ 8’’) (31’ 0’’) (32’ 10’’)

Max. digging reach 8,880 9,290 9,860

A’
on ground (29’ 2’’) (30’ 6’’) (32’ 4’’)
D
5,460 5,860 6,380
B Max. digging depth
(17’ 11’’) (19’ 3’’) (20’ 11’’)
E Max. digging depth 5,340 5,750 6,270
B’
(8’ level) (17’ 6’’) (18’ 10’’) (20’ 7’’)

Max. vertical wall 4,530 4,970 5,520

C
digging depth (14’ 10’’) (16’ 4’’) (18’ 1’’)
HX235 LCR

10,600 10,990 11,470

D Max. digging height
(34’ 9’’) (36’ 1’’) (37’ 8’’)

7,680 8,090 8,540

C E Max. dumping height
(25’ 2’’) (26’ 7’’) (28’ 0’’)
B B'
2,130 2,030 2,000
F Min. front swing radius
(7’ 0’’) (6’ 8’’) (6’ 7’’)

8ft

6
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR MONO BOOM

Boom: 5.68 m (18’ 8’’) / Arm: 2.0 m (6’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser.
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

10.5 m kg *4160 *4160 4.63

(35 ft) lb *9170 *9170 (15.2)
9.0 m kg *4580 *4580 4.48
(30 ft) lb *10100 *10100 (14.7)
7.5 m kg *4770 *4770 *4100 *4100 6.56
(25 ft) lb *10520 *10520 *9040 *9040 (21.5)
6.0 m kg *4930 *4930 *4540 *4540 *3990 3080 7.70
(20 ft) lb *10870 *10870 *10010 *10010 *8800 6790 (25.3)
4.5 m kg *8300 *8300 *5880 *5880 *4860 4630 *3990 2580 8.36
(15 ft) lb *18300 *18300 *12960 *12960 *10710 10210 *8800 5690 (27.4)
3.0 m kg *7250 6860 *5440 4370 *4570 3000 *4030 2340 8.67
(10 ft) lb *15980 15120 *11990 9630 *10080 6610 *8880 5160 (28.4)
1.5 m kg *8350 6350 *5980 4120 *4770 2890 *4080 2290 8.66
(5 ft) lb *18410 14000 *13180 9080 *10520 6370 *8990 5050 (28.4)
Ground kg *8660 6110 *6250 3960 *4100 2410 8.36
Line lb *19090 13470 *13780 8730 *9040 5310 (27.4)
-1.5 m kg *11410 *11410 *8260 6080 *6050 3910 *4010 2790 7.69
(-5 ft) lb *25150 *25150 *18210 13400 *13340 8620 *8840 6150 (25.2)
-3.0 m kg *9650 *9650 *7130 6190 *5090 4000 *3610 *3610 6.55
(-10 ft) lb *21270 *21270 *15720 13650 *11220 8820 *7960 *7960 (21.5)

Boom: 5.68 m (18’ 8’’) / Arm: 2.4 m (7’ 10’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser.
Load radius At max. reach
Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *4060 *4060 5.25

(30 ft) lb *8950 *8950 (17.2)
7.5 m kg *4230 *4230 *3770 3710 7.07
(25 ft) lb *9330 *9330 *8310 8180 (23.2)
6.0 m kg *4450 *4450 *4170 *4170 *3700 2800 8.12
(20 ft) lb *9810 *9810 *9190 *9190 *8160 6170 (26.6)
4.5 m kg *7210 *7210 *5400 *5400 *4550 *4550 *3900 3120 *3720 2370 8.74
(15 ft) lb *15900 *15900 *11900 *11900 *10030 *10030 *8600 6880 *8200 5220 (28.7)
3.0 m kg *11320 *11320 *6790 *6790 *5170 4410 *4360 3010 *3770 2160 9.04
(10 ft) lb *24960 *24960 *14970 *14970 *11400 9720 *9610 6640 *8310 4760 (29.7)
1.5 m kg *8040 6400 *5790 4130 *4630 2880 *3830 2110 9.03
(5 ft) lb *17730 14110 *12760 9110 *10210 6350 *8440 4650 (29.6)
Ground kg *9170 *9170 *8580 6100 *6150 3940 *4760 2780 *3870 2210 8.74
Line lb *20220 *20220 *18920 13450 *13560 8690 *10490 6130 *8530 4870 (28.7)
-1.5 m kg *9770 *9770 *12150 12070 *8390 6010 *6100 3860 *3840 2510 8.12
(-5 ft) lb *21540 *21540 *26790 26610 *18500 13250 *13450 8510 *8470 5530 (26.6)
-3.0 m kg *14230 *14230 *10480 *10480 *7490 6080 *5420 3900 *3600 3230 7.06
(-10 ft) lb *31370 *31370 *23100 *23100 *16510 13400 *11950 8600 *7940 7120 (23.2)
-4.5 m kg *7610 *7610 *5470 *5470
(-15 ft) lb *16780 *16780 *12060 *12060

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

7
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR MONO BOOM

Boom: 5.68 m (18’ 8’’) / Arm: 2.92 m (9’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser.
Load radius At max. reach
Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *2920 *2920 *3570 *3570 6.12

(30 ft) lb *6440 *6440 *7870 *7870 (20.1)
7.5 m kg *3260 *3260 *3410 3210 7.70
(25 ft) lb *7190 *7190 *7520 7080 (25.3)
6.0 m kg *3720 *3720 *3380 2500 8.66
(20 ft) lb *8200 *8200 *7450 5510 (28.4)
4.5 m kg *4750 *4750 *4140 *4140 *3800 3170 *3410 2130 9.24
(15 ft) lb *10470 *10470 *9130 *9130 *8380 6990 *7520 4700 (30.3)
3.0 m kg *9680 *9680 *6180 *6180 *4810 4460 *4100 3030 *3460 1950 9.52
(10 ft) lb *21340 *21340 *13620 *13620 *10600 9830 *9040 6680 *7630 4300 (31.2)
1.5 m kg *9550 *9550 *7590 6510 *5500 4160 *4440 2880 *3530 1900 9.52
(5 ft) lb *21050 *21050 *16730 14350 *12130 9170 *9790 6350 *7780 4190 (31.2)
Ground kg *9930 *9930 *8400 6110 *5990 3930 *4670 2760 *3600 1970 9.24
Line lb *21890 *21890 *18520 13470 *13210 8660 *10300 6080 *7940 4340 (30.3)
-1.5 m kg *8850 *8850 *12790 11890 *8470 5950 *6100 3810 *4630 2690 *3620 2210 8.66
(-5 ft) lb *19510 *19510 *28200 26210 *18670 13120 *13450 8400 10210 5930 *7980 4870 (28.4)
-3.0 m kg *12280 *12280 *11380 *11380 *7840 5960 *5690 3810 *3500 2750 7.69
(-10 ft) lb *27070 *27070 *25090 *25090 *17280 13140 *12540 8400 *7720 6060 (25.2)
-4.5 m kg *8920 *8920 *6300 6140 *2930 *2930 6.11
(-15 ft) lb *19670 *19670 *13890 13540 *6460 *6460 (20.0)

Boom: 5.68 m (18’ 8’’) / Arm: 2.0 m (7’ 10’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade up
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

10.5 m kg *4160 *4160 4.63

(35 ft) lb *9170 *9170 (15.2)
9.0 m kg *4580 *4580 4.48
(30 ft) lb *10100 *10100 (14.7)
7.5 m kg *4770 *4770 *4100 *4100 6.56
(25 ft) lb *10520 *10520 *9040 *9040 (21.5)
6.0 m kg *4930 *4930 *4540 *4540 *3990 3520 7.70
(20 ft) lb *10870 *10870 *10010 *10010 *8800 7760 (25.3)
4.5 m kg *8300 *8300 *5880 *5880 *4860 *4860 *3990 2960 8.36
(15 ft) lb *18300 *18300 *12960 *12960 *10710 *10710 *8800 6530 (27.4)
3.0 m kg *7250 *7250 *5440 4980 *4570 3440 *4030 2710 8.67
(10 ft) lb *15980 *15980 *11990 10980 *10080 7580 *8880 5970 (28.4)
1.5 m kg *8350 7280 *5980 4730 *4770 3330 *4080 2660 8.66
(5 ft) lb *18410 16050 *13180 10430 *10520 7340 *8990 5860 (28.4)
Ground kg *8660 7040 *6250 4560 *4100 2800 8.36
Line lb *19090 15520 *13780 10050 *9040 6170 (27.4)
-1.5 m kg *11410 *11410 *8260 7010 *6050 4510 *4010 3220 7.69
(-5 ft) lb *25150 *25150 *18210 15450 *13340 9940 *8840 7100 (25.2)
-3.0 m kg *9650 *9650 *7130 7130 *5090 4610 *3610 *3610 6.55
(-10 ft) lb *21270 *21270 *15720 15720 *11220 10160 *7960 *7960 (21.5)

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

8
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR MONO BOOM

Boom: 5.68 m (18’ 8’’) / Arm: 2.0 m (6’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade down
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

10.5 m kg *4160 *4160 4.63

(35 ft) lb *9170 *9170 (15.2)
9.0 m kg *4580 *4580 4.48
(30 ft) lb *10100 *10100 (14.7)
7.5 m kg *4770 *4770 *4100 *4100 6.56
(25 ft) lb *10520 *10520 *9040 *9040 (21.5)
6.0 m kg *4930 *4930 *4540 *4540 *3990 3300 7.70
(20 ft) lb *10870 *10870 *10010 *10010 *8800 7280 (25.3)
4.5 m kg *8300 *8300 *5880 *5880 *4860 *4860 *3990 2770 8.36
(15 ft) lb *18300 *18300 *12960 *12960 *10710 *10710 *8800 6110 (27.4)
3.0 m kg *7250 *7250 *5440 4660 *4570 3220 *4030 2530 8.67
(10 ft) lb *15980 *15980 *11990 10270 *10080 7100 *8880 5580 (28.4)
1.5 m kg *8350 6770 *5980 4410 *4770 3110 *4080 2480 8.66
(5 ft) lb *18410 14930 *13180 9720 *10520 6860 *8990 5470 (28.4)
Ground kg *8660 6530 *6250 4250 *4100 2610 8.36
Line lb *19090 14400 *13780 9370 *9040 5750 (27.4)
-1.5 m kg *11410 *11410 *8260 6500 *6050 4200 *4010 3000 7.69
(-5 ft) lb *25150 *25150 *18210 14330 *13340 9260 *8840 6610 (25.2)
-3.0 m kg *9650 *9650 *7130 6610 *5090 4290 *3610 *3610 6.55
(-10 ft) lb *21270 *21270 *15720 14570 *11220 9460 *7960 *7960 (21.5)

Boom: 5.68 m (18’ 8’’) / Arm: 2.4 m (7’ 10’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade up
Load radius At max. reach
Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *4060 *4060 5.25

(30 ft) lb *8950 *8950 (17.2)
7.5 m kg *4230 *4230 *3770 *3770 7.07
(25 ft) lb *9330 *9330 *8310 *8310 (23.2)
6.0 m kg *4450 *4450 *4170 *4170 *3700 3210 8.12
(20 ft) lb *9810 *9810 *9190 *9190 *8160 7080 (26.6)
4.5 m kg *7210 *7210 *5400 *5400 *4550 *4550 *3900 3560 *3720 2730 8.74
(15 ft) lb *15900 *15900 *11900 *11900 *10030 *10030 *8600 7850 *8200 6020 (28.7)
3.0 m kg *11320 *11320 *6790 *6790 *5170 5020 *4360 3450 *3770 2510 9.04
(10 ft) lb *24960 *24960 *14970 *14970 *11400 11070 *9610 7610 *8310 5530 (29.7)
1.5 m kg *8040 7340 *5790 4740 *4630 3320 *3830 2460 9.03
(5 ft) lb *17730 16180 *12760 10450 *10210 7320 *8440 5420 (29.6)
Ground kg *9170 *9170 *8580 7030 *6150 4540 *4760 3230 *3870 2570 8.74
Line lb *20220 *20220 *18920 15500 *13560 10010 *10490 7120 *8530 5670 (28.7)
-1.5 m kg *9770 *9770 *12150 *12150 *8390 6940 *6100 4460 *3840 2920 8.12
(-5 ft) lb *21450 *21540 *26790 *26790 *18500 15300 *13450 9830 *8470 6440 (26.6)
-3.0 m kg *14230 *14230 *10480 *10480 *7490 7020 *5420 4510 *3600 *3600 7.06
(-10 ft) lb *31370 *31370 *23100 *23100 *16510 15480 *11950 9940 *7940 *7940 (23.2)
-4.5 m kg *7610 *7610 *5470 *5470
(-15 ft) lb *16780 *16780 *12060 *12060

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

9
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR MONO BOOM

Boom: 5.68 m (18’ 8’’) / Arm: 2.4 m (7’ 10’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade down
Load radius At max. reach
Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *4060 *4060 5.25

(30 ft) lb *8950 *8950 (17.2)
7.5 m kg *4230 *4230 *3770 *3770 7.07
(25 ft) lb *9330 *9330 *8310 *8310 (23.2)
6.0 m kg *4450 *4450 *4170 *4170 *3700 3000 8.12
(20 ft) lb *9810 *9810 *9190 *9190 *8160 6610 (26.6)
4.5 m kg *7210 *7210 *5400 *5400 *4550 *4550 *3900 3340 *3720 2550 8.74
(15 ft) lb *15900 *15900 *11900 *11900 *10030 *10030 *8600 7360 *8200 5620 (28.7)
3.0 m kg *11320 *11320 *6790 *6790 *5170 4700 *4360 3230 *3770 2340 9.04
(10 ft) lb *24960 *24960 *14970 *14970 *11400 10360 *9610 7120 *8310 5160 (29.7)
1.5 m kg *8040 6830 *5790 4420 *4630 3100 *3830 2280 9.03
(5 ft) lb *17730 15060 *12760 9740 *10210 6830 *8440 5030 (29.6)
Ground kg *9170 *9170 *8580 6520 *6150 4230 *4760 3000 *3870 2390 8.74
Line lb *20220 *20220 *18920 14370 *13560 9330 *10490 6610 *8530 5270 (28.7)
-1.5 m kg *9770 *9770 *12150 12070 *8390 6440 *6100 4150 *3840 2710 8.12
(-5 ft) lb *21540 *21540 *26790 26610 *18500 14200 *13450 9150 *8470 5970 (26.6)
-3.0 m kg *14230 *14230 *10480 *10480 *7490 6510 *5420 4190 *3600 3470 7.06
(-10 ft) lb *31370 *31370 *23100 *23100 *16510 14350 *11950 9240 *7940 7650 (23.2)
-4.5 m kg *7610 *7610 *5470 *5470
(-15 ft) lb *16780 *16780 *12060 *12060

Boom: 5.68 m (18’ 8’’) / Arm: 2.92 m (9’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade up
Load radius At max. reach
Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *2920 *2920 *3570 *3570 6.12

(30 ft) lb *6440 *6440 *7870 *7870 (20.1)
7.5 m kg *3260 *3260 *3410 *3410 7.70
(25 ft) lb *7190 *7190 *7520 *7520 (25.3)
6.0 m kg *3720 *3720 *3380 2870 8.66
(20 ft) lb *8200 *8200 *7450 6330 (28.4)
4.5 m kg *4750 *4750 *4140 *4140 *3800 3620 *3410 2470 9.24
(15 ft) lb *10470 *10470 *9130 *9130 *8380 7980 *7520 5450 (30.3)
3.0 m kg *9680 *9680 *6180 *6180 *4810 *4810 *4100 3480 *3460 2280 9.52
(10 ft) lb *21340 *21340 *13620 *13620 *10600 *10600 *9040 7670 *7630 5030 (31.2)
1.5 m kg *9550 *9550 *7590 7450 *5500 4770 *4440 3330 *3530 2230 9.52
(5 ft) lb *21050 *21050 *16730 16420 *12130 10520 *9790 7340 *7780 4920 (31.2)
Ground kg *9930 *9930 *8400 7040 *5990 4530 *4670 3200 *3600 2310 9.24
Line lb *21890 *21890 *18520 15520 *13210 9990 *10300 7050 *7940 5090 (30.3)
-1.5 m kg *8850 *8850 *12790 11890 *8470 6880 *6100 4410 *4630 3140 *3620 2580 8.66
(-5 ft) lb *19510 *19510 *28200 26210 *18670 15170 *13450 9720 *10210 6920 *7980 5690 (28.4)
-3.0 m kg *12280 *12280 *11380 *11380 *7840 6900 *5690 4410 *3500 3180 7.69
(-10 ft) lb *27070 *27070 *25090 *25090 *17280 15210 *12540 9720 *7720 7010 (25.2)
-4.5 m kg *8920 *8920 *6300 *6300 *2930 *2930 6.11
(-15 ft) lb *19670 *19670 *13890 *13890 *6460 *6460 (20.0)

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

10
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR MONO BOOM

Boom: 5.68 m (18’ 8’’) / Arm: 2.92 m (9’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade down
Load radius At max. reach
Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *2920 *2920 *3570 *3570 6.12

(30 ft) lb *6440 *6440 *7870 *7870 (20.1)
7.5 m kg *3260 *3260 *3410 *3410 7.70
(25 ft) lb *7190 *7190 *7520 *7520 (25.3)
6.0 m kg *3720 *3720 *3380 2680 8.66
(20 ft) lb *8200 *8200 *7450 5910 (28.4)
4.5 m kg *4750 *4750 *4140 *4140 *3800 3390 *3410 2300 9.24
(15 ft) lb *10470 *10470 *9130 *9130 *8380 7470 *7520 5070 (30.3)
3.0 m kg *9680 *9680 *6180 *6180 *4810 4750 *4100 3250 *3460 2120 9.52
(10 ft) lb *21340 *21340 *13620 *13620 *10600 10470 *9040 7170 *7630 4670 (31.2)
1.5 m kg *9550 *9550 *7590 6930 *5500 4450 *4440 3100 *3530 2070 9.52
(5 ft) lb *21050 *21050 *16730 15280 *12130 9810 *9790 6830 *7780 4560 (31.2)
Ground kg *9930 *9930 *8400 6530 *5990 4220 *4670 2980 *3600 2150 9.24
Line lb *21890 *21890 *18520 14400 *13210 9300 *10300 6570 *7940 4740 (30.3)
-1.5 m kg *8850 *8850 *12790 12690 *8470 6370 *6100 4100 *4630 2910 *3620 2400 8.66
(-5 ft) lb *19510 *19510 *28200 27980 *18670 14040 *13450 9040 *10210 6420 *7980 5290 (28.4)
-3.0 m kg *12280 *12280 *11380 *11380 *7840 6390 *5690 4100 *3500 2960 7.69
(-10 ft) lb *27070 *27070 *25090 *25090 *17280 14090 *12540 9040 *7720 6530 (25.2)
-4.5 m kg *8920 *8920 *6300 *6300 *2930 *2930 6.11
(-15 ft) lb *19670 *19670 *13890 *13890 *6460 *6460 (20.0)

HX235 LCR 2-PIECE BOOM

Boom: 5.65 m (18’ 6’’) / Arm: 2.0 m (6’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade up
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *6750 *6750 4.51

(30 ft) lb *14880 *14880 (14.8)
7.5 m kg *8110 *8110 *6850 *6850 *5200 4700 6.58
(25 ft) lb *17880 *17880 *15100 *15100 *11460 10360 (21.6)
6.0 m kg *8460 *8460 *6960 *6960 *5740 5390 *4630 3470 7.72
(20 ft) lb *18650 *18650 *15340 *15340 *12650 11880 *10210 7650 (25.3)
4.5 m kg *11210 *11210 *7620 *7620 *5920 5230 *4270 2920 8.37
(15 ft) lb *24710 *24710 *16800 *16800 *13050 11530 *9410 6440 (27.5)
3.0 m kg *8430 7790 *6190 4950 *4850 3410 *3960 2670 8.68
(10 ft) lb *18580 17170 *13650 10910 *10690 7520 *8730 5890 (28.5)
1.5 m kg *8660 7230 *6260 4690 *4710 3300 *3610 2620 8.68
(5 ft) lb *19090 15940 *13800 10340 *10380 7280 7960 5780 (28.5)
Ground kg *7950 6980 *5880 4520 *4200 3230 *3130 2770 8.37
Line lb *17530 15390 *12960 9960 *9260 7120 *6900 6110 (27.5)
-1.5 m kg *7060 *7060 *6470 *6470 *4870 4480 *2330 *2330 7.71
(-5 ft) lb *15560 *15560 *14260 *14260 *10740 9880 *5140 *5140 (25.3)
-3.0 m kg *4140 *4140 *2800 *2800
(-10 ft) lb *9130 *9130 *6170 *6170

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

11
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR 2-PIECE BOOM

Boom: 5.65 m (18’ 6’’) / Arm: 2.0 m (6’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade down
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *6750 *6750 4.51

(30 ft) lb *14880 *14880 (14.8)
7.5 m kg *8110 *8110 *6850 *6850 *5200 4420 6.58
(25 ft) lb *17880 *17880 *15100 *15100 *11460 9740 (21.6)
6.0 m kg *8460 *8460 *6960 *6960 *5740 5060 *4630 3250 7.72
(20 ft) lb *18650 *18650 *15340 *15340 *12650 11160 *10210 7170 (25.3)
4.5 m kg *11210 *11210 *7620 *7620 *5920 4900 *4270 2720 8.37
(15 ft) lb *24710 *24710 *16800 *16800 *13050 10800 *9410 6000 (27.5)
3.0 m kg *8430 7250 *6190 4630 *4850 3180 *3960 2480 8.68
(10 ft) lb *18580 15980 *13650 10210 *10690 7010 *8730 5470 (28.5)
1.5 m kg *8660 6710 *6260 4370 *4710 3070 *3610 2440 8.68
(5 ft) lb *19090 14790 *13800 9630 *10380 6770 7960 5380 (28.5)
Ground kg *7950 6460 *5880 4200 *4200 3000 *3130 2580 8.37
Line lb *17530 14240 *12960 9260 *9260 6610 *6900 5690 (27.5)
-1.5 m kg *7060 *7060 *6470 6450 *4870 4160 *2330 *2330 7.71
(-5 ft) lb *15560 *15560 *14260 14220 *10740 9170 *5140 *5140 (25.3)
-3.0 m kg *4140 *4140 *2800 *2800
(-10 ft) lb *9130 *9130 *6170 *6170

Boom: 5.65 m (18’ 6’’) / Arm: 2.4 m (7’ 10’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade up
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *5600 *5600 *5830 *5830 5.31

(30 ft) lb *12350 *12350 *12850 *12850 (17.4)
7.5 m kg *6240 *6240 *5830 *5830 *4760 4140 7.10
(25 ft) lb *13760 *13760 *12850 *12850 *10490 9130 (23.3)
6.0 m kg *6390 *6390 *6570 *6570 *5480 5480 *4290 3150 8.15
(20 ft) lb *14090 *14090 *14480 *14480 *12080 12080 *9460 6940 (26.7)
4.5 m kg *10370 *10370 *7270 *7270 *5720 5290 *4040 3540 *3980 2690 8.77
(15 ft) lb *22860 *22860 *16030 *16030 *12610 11660 *8910 7800 *8770 5930 (28.8)
3.0 m kg *8170 7920 *6050 5000 *4790 3430 *3720 2470 9.06
(10 ft) lb *18010 17460 *13340 11020 *10560 7560 *8200 5450 (29.7)
1.5 m kg *8620 7300 *6220 4700 *4740 3290 *3420 2420 9.06
(5 ft) lb *19000 16090 *13710 10360 *10450 7250 *7540 5340 (29.7)
Ground kg *8940 *8940 *8190 6970 *5980 4500 *4400 3190 *3010 2540 8.77
Line lb *19710 *19710 *18060 15370 *13180 9920 *9700 7030 *6640 5600 (28.8)
-1.5 m kg *8500 *8500 *6940 6890 *5160 4430 *2360 *2360 8.15
(-5 ft) lb *18740 *18740 *15300 15190 *11380 9770 *5200 *5200 (26.7)
-3.0 m kg *4860 *4860 *3490 *3490
(-10 ft) lb *10710 *10710 *7690 *7690

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

12
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR
Boom: 5.65 m (18’ 6’’) / Arm: 2.4 m (7’ 10’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade down
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *5600 *5600 *5830 *5830 5.31

(30 ft) lb *12350 *12350 *12850 *12850 (17.4)
7.5 m kg *6240 *6240 *5830 *5830 *4760 3880 7.10
(25 ft) lb *13760 *13760 *12850 *12850 *10490 8550 (23.3)
6.0 m kg *6390 *6390 *6570 *6570 *5480 5140 *4290 2950 8.15
(20 ft) lb *14090 *14090 *14480 *14480 *12080 11330 *9460 6500 (26.7)
4.5 m kg *10370 *10370 *7270 *7270 *5720 4960 *4040 3310 *3980 2500 8.77
(15 ft) lb *22860 *22860 *16030 *16030 *12610 10930 *8910 7300 *8770 5510 (28.8)
3.0 m kg *8170 7380 *6050 4670 *4790 3200 *3720 2290 9.06
(10 ft) lb *18010 16270 *13340 10300 *10560 7050 *8200 5050 (29.7)
1.5 m kg *8620 6770 *6220 4380 *4740 3060 *3420 2240 9.06
(5 ft) lb *19000 14930 *13710 9660 *10450 6750 *7540 4940 (29.7)
Ground kg *8940 *8940 *8190 6450 *5980 4180 *4400 2960 *3010 2350 8.77
Line lb *19710 *19710 *18060 14220 *13180 9220 *9700 6530 *6640 5180 (28.8)
-1.5 m kg *8500 *8500 *6940 6370 *5160 4110 *2360 *2360 8.15
(-5 ft) lb *18740 *18740 *15300 14040 *11380 9060 *5200 *5200 (26.7)
-3.0 m kg *4860 *4860 *3490 *3490
(-10 ft) lb *10710 *10710 *7690 *7690

Boom: 5.65 m (18’ 6’’) / Arm: 2.92 m (9’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade up
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *4950 *4950 *3120 *3120 *4630 *4630 6.19

(30 ft) lb *10910 *10910 *6880 *6880 *10210 *10210 (20.3)
7.5 m kg *4750 *4750 *3400 *3400 *4050 3560 7.75
(25 ft) lb *10470 *10470 *7500 *7500 *8930 7850 (25.4)
6.0 m kg *4760 *4760 *5190 *5190 *4840 *4840 *2180 *2180 *3820 2800 8.71
(20 ft) lb *10490 *10490 *11440 *11440 *10670 *10670 *4810 *4810 *8420 6170 (28.6)
4.5 m kg *6690 *6690 *6760 *6760 *5420 5370 *4250 3600 *3650 2410 9.29
(15 ft) lb *14750 *14750 *14900 *14900 *11950 11840 *9370 7640 *8050 5310 (30.5)
3.0 m kg *12100 *12100 *7760 *7760 *5820 5060 *4670 3450 *3430 2220 9.56
(10 ft) lb *26680 *26680 *17110 *17110 *12830 11160 *10300 7610 *7560 4890 (31.4)
1.5 m kg *9380 *9380 *8470 7400 *6110 4730 *4710 3290 *3180 2180 9.56
(5 ft) lb *20680 *20680 *18670 16310 *13470 10430 *10380 7250 *7010 4810 (31.4)
Ground kg *9730 *9730 *8370 6970 *6040 4480 *4520 3160 *2850 2270 9.29
Line lb *21450 *21450 *18450 15370 *13320 9880 *9960 6970 *6280 5000 (30.5)
-1.5 m kg *9980 *9980 *7420 6810 *5440 4360 *3890 3100 *2330 *2330 8.71
(-5 ft) lb *22000 *22000 *16360 15010 *11990 9610 *8580 6830 *5140 *5140 (28.6)
-3.0 m kg *7060 *7060 *5650 *5650 *4130 *4130
(-10 ft) lb *15560 *15560 *12460 *12460 *9110 *9110

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

13
LIFTING CAPACITY

Rating over-front Rating over-side or 360 degrees

HX235 LCR 2-PIECE BOOM

Boom: 5.65 m (18’ 6’’) / Arm: 2.92 m (9’ 7’’) / Bucket: 0.80 m3 (1.05 yd3) SAE heaped / Shoe: 600 mm (24’’) triple grouser. Dozer Blade down
Load radius At max. reach
Load point 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height
m (ft) m (ft)

9.0 m kg *4950 *4950 *3120 *3120 *4630 *4630 6.19

(30 ft) lb *10910 *10910 *6880 *6880 *10210 *10210 (20.3)
7.5 m kg *4750 *4750 *3400 *3400 *4050 3340 7.75
(25 ft) lb *10470 *10470 *7500 *7500 *8930 7360 (25.4)
6.0 m kg *4760 *4760 *5190 *5190 *4840 *4840 *2180 *2180 *3820 2610 8.71
(20 ft) lb *10490 *10490 *11440 *11440 *10670 *10670 *4810 *4810 *8420 5750 (28.6)
4.5 m kg *6690 *6690 *6760 *6760 *5420 5040 *4250 3360 *3650 2240 9.29
(15 ft) lb *14750 *14750 *14900 *14900 *11950 11110 *9370 7410 *8050 4940 (30.5)
3.0 m kg *12100 *12100 *7760 7560 *5820 4730 *4670 3220 *3430 2060 9.56
(10 ft) lb *26680 *26680 *17110 16670 *12830 10430 *10300 7100 *7560 4540 (31.4)
1.5 m kg *9380 *9380 *8470 6870 *6110 4400 *4710 3060 *3180 2010 9.56
(5 ft) lb *20680 *20680 *18670 15150 *13470 9700 *10380 6750 *7010 4430 (31.4)
Ground kg *9730 *9730 *8370 6450 *6040 4160 *4520 2930 *2850 2100 9.29
Line lb *21450 *21450 *18450 14220 *13320 9170 *9960 6460 *6280 4630 (30.5)
-1.5 m kg *9980 *9980 *7420 6290 *5440 4040 *3890 2870 *2330 *2330 8.71
(-5 ft) lb *22000 *22000 *16360 13870 *11990 8910 *8580 6330 *5140 *5140 (28.6)
-3.0 m kg *7060 *7060 *5650 *5650 *4130 4050
(-10 ft) lb *15560 *15560 *12460 *12460 *9110 8930

1. Lifting capacity are based on SAE J1097 and ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

14
ENGINE STD OPT SAFETY STD OPT
Cummins QSB 6.7 engine Battery master switch
HYDRAULIC SYSTEM Rearview camera
Four front working lights
Intelligent Power Control (IPC) Travel alarm
3-power mode, 2-work mode, user mode
Rear work lamp
Variable Power Control
Beacon lamp
Pump Flow Control
Automatic swing brake
Attachment Mode Flow Control
Boom holding system
Engine Auto Idle
Arm holding system
Engine Auto Shutdown Control
Safety lock valve for boom cylinder with overload warning device
Electronic Fan Control
Safety lock valve for arm cylinder
CABIN & INTERIOR Swing Lock System
ISO Standard cabin Two outside rearview mirrors
Rise-up type windshield wiper OTHER
Radio / USB player
Booms
Handsfree mobile phone system with USB
5.68 m; 18’ 8’’ Mono
12 volt power outlet (24V DC to 12V DC converter)
5.65 m; 18’ 6’’ 2-Piece
Electric horn
Arms
All-weather steel cab with 360° visibility
2.0 m; 6’ 7’’
Safety glass windows
2.4 m; 7’ 10’’
Sliding fold-in front window
2.92 m; 9’ 7’’
Sliding side window (LH)
Removable clean-out dust net for cooler
Lockable door
Removable reservoir tank
Hot & cool box
Fuel pre-filter
Storage compartment & Ashtray
Fuel warmer (single)
Transparent cabin roof-cover
Fuel warmer (dual)
Sun visor
Self-diagnostics system
Door and cab locks, one key
Hi MATE (Remote Management System)
Mechanical suspension seat with heater
Batteries (2 × 12 V × 100 Ah)
Pilot-operated slidable joystick
Fuel filler pump (50 ℓ/min)
Console box height adjust system
Single-acting piping kit (breaker, etc.)
Automatic climate control
Double-acting piping kit (clamshell, etc.)
Air conditioner & heater
Rotating Piping Kit
Defroster
Quick coupler piping
Starting Aid (air grid heater) for cold weather
One Pedal Straight Travel System
Centralized monitoring
Accumulator for lowering work equipment
8’’ LCD display
Pattern change valve (2 patterns)
Engine speed or Trip meter/Accel.
Fine Swing Control System
Engine coolant temperature gauge
Tool kit
Max power
Low speed/High speed UNDERCARRIAGE
Auto idle Lower frame under cover (Additional)
Overload Lower frame under cover (Normal)
Check Engine Track shoes
Air cleaner clogging Triple grouser shoe (600 mm; 24’’)
Indicators Triple grouser shoe (700 mm; 28’’)
ECO Gauges Triple grouser shoe (800 mm; 32’’)
Fuel level gauge Triple grouser shoe (900 mm; 36’’)
Hyd. oil temperature gauge Track rail guard
Fuel warmer
Warnings STD = Standard
Communication error OPT = Optional
Low battery
Clock
Cabin lights
Cabin front window rain guard
Cabin roof-steel cover
Seat
* Standard and optional equipment may vary. Contact your Hyundai dealer for more information.
Adjustable air suspension seat with heater The machine may vary according to International standards.
Cabin FOPS/FOG (ISO/DIS 10262) Level 2 * The photos may include attachments and optional equipment that are not available in your area.
FOPS (Falling Object Protective Structure) · ISO 3449 Level 2 * Materials and specifications are subject to change without advance notice.
* All imperial measurements rounded off to the nearest pound or inch.
FOG (Falling Object Guard) * The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant HFC-134a
Cabin ROPS (ISO 12117-2) (Global Warming Potential = 1430). The system contains 0.75 kg of refrigerant which has a CO2 equivalent of
ROPS (Roll Over Protective Structure) 1.0725 metric tonne.

PLEASE CONTACT

Hyundai Construction Equipment Europe nv

Hyundailaan 4, 3980 Tessenderlo, Belgium Tel: (32) 14-56-2200 Fax: (32) 14-59-3405 www.hyundai.eu EN - 2017.11 Rev 5