SHACKLES

G-215 / S-215 •
•
Forged, Quenched & Tempered, with alloy pins.
Working Load Limit permanently shown on every shackle.
1
• Hot-dip galvanized (G) or self colored (S).
• Sizes 3/8 inch and below are mechanically galvanized. 2
• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.

3
• Shackles can be furnished proof tested with certificates to designated
standards, such as ABS, DNV, Lloyds, or other certification. Charges for
proof testing and certification available when requested at the time of order.

4
• Shackles are Quenched and Tempered and can meet DNV impact
requirements of 42 Joules (31 ft-Ib) at -20° C (-4° F).
• G-215 Round pin chain shackles meet the performance requirements of

5
Federal Specification RR-C-271H, Type IVB, Grade A, Class 1, except for
those provisions required of the contractor.
• DO NOT SIDE LOAD ROUND PIN SHACKLES.

6
• DO NOT SIDE LOAD ROUND PIN SHACKLES.

G-215 / S-215 Round Pin Chain Shackles

Nominal
Working
Load
Stock
No. Weight
Dimensions
(mm)
Tolerance
(+ / - mm)
7
Size Limit Each
(in) (t) G-215 S-215 (kg) A B C D E F G K N G A
1/4
5/16
3/8
0.5
0.75
1
1018810
1018838
1018856
1018829
1018847
1018865
.05
.08
.11
11.9
13.5
16.8
7.85
9.65
11.2
6.35
7.85
9.65
6.35
7.85
9.65
24.6
29.5
35.8
15.5
19.1
23.1
22.4
26.2
31.8
40.4
48.5
58.5
34.0
40.4
47.2
1.50
1.50
3.30
1.50
1.50
1.50
8
7/16 1.5 1018874 1018883 .18 19.1 12.7 11.2 11.2 41.4 26.9 36.6 67.5 54.0 3.30 1.50
1/2
5/8
3/4
2
3.25
4.75
1018892
1018918
1018936
1018909
1018927
1018945
.23
.55
.91
20.6
26.9
31.8
16.0
19.1
22.4
12.7
15.7
20.6
12.7
16.0
19.1
46.0
58.5
70.0
30.2
38.1
46.0
41.4
51.0
60.5
77.0
95.5
115
60.5
74.0
87.0
3.30
3.30
6.35
1.50
1.50
1.50
9
7/8 6.5 1018954 1018963 1.49 36.6 25.4 24.6 22.4 81.0 53.0 71.5 135 96.5 6.35 1.50
1
1-1/8
1-1/4
8.5
9.5
12
1018972
1018990
1019016
1018981
1019007
1019025
2.15
2.86
4.08
42.9
46.0
51.5
28.7
31.8
35.1
25.4
31.8
35.1
25.4
28.7
31.8
93.5
103
115
60.5
68.5
76.0
81.0
91.0
100
151
172
191
115
130
140
6.35
6.35
6.35
1.50
1.50
3.30
10
1-3/8 13.5 1019034 1019043 5.44 57.0 38.1 38.1 35.1 127 84.0 111 210 156 6.35 3.30
1-1/2
1-3/4
2
17
25
35
1019052
1019070
1019098
1019061
1019089
1019105
7.33
13.6
19.6
60.5
73.0
82.5
41.4
51.0
57.0
41.1
54.0
51.0
38.1
44.5
53.3
137
162
184
92.0
106
122
122
146
172
230
279
312
165
197
222
6.35
6.35
6.35
3.30
3.30
3.30
11
12
6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit.

APPLICATION AND WARNING INFORMATION

SECTION 17

13
14
15
16
17

Copyright © 2022
2023 The Crosby Group LLC All Rights Reserved 23