SHACKLES
G-2150 / S-2150 • Working Load Limit and Grade 6 permanently shown on every shackle.
• Forged, Quenched & Tempered, with alloy pins.
1
• Hot-dip galvanized (G) or self-colored (S). 85 ton shackles have hot-dip
galvanized bows and the bolts are Dimetcoted® and painted red.
• Sizes 3/8 inch and below are mechanically galvanized.
2
• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. (1/2t
- 55t).
• Approved for use at -40° C (-40 degrees F) to 204° C (400° F).
3
• Meets or exceeds all requirements of ASME B30.26.
• Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
• Shackles 55 metric tons and smaller can be furnished proof tested with
4
certificates to designated standards, such as ABS, DNV, Lloyds, or other
certification when requested at time of order.
• Type Approval certification in accordance with ABS 2016 Steel Vessel
5
Rules and 2016 ABS Guide for Certification of Lifting Appliance. Certificates
available when requested at time of order and may include additional charges.
• Meets the performance requirements of Federal Specification RR-C-271H, Type IVB, Grade A,
6
Class 3, except for those provisions required of the contractor.
• All 2150 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F)
upon special request.
7
• Look for the Red Pin®... the mark of genuine Crosby quality.
8
G-2150 / S-2150 Bolt Type Chain Shackles
Nominal
Size
Working
Load
Limit
Stock
No. Weight
Each
Dimensions
(mm)
Tolerance
(+ / - mm) 9
(in) (t)* G-2150 S-2150 (kg) A B D F G K M P R G A
10
1/4 0.5 1019768 - .06 11.9 7.9 6.4 15.5 19.1 40.4 24.6 39.6 6.35 1.50 1.50
5/16 0.75 1019770 - .10 13.5 9.7 7.9 19.1 25.4 48.5 29.5 46.2 7.85 1.50 1.50
3/8 1 1019772 - .15 16.8 11.2 9.7 23.1 31.0 58.5 35.8 55.0 9.65 3.30 1.50
7/16 1.5 1019774 - .22 19.1 12.7 11.2 26.9 36.1 67.5 41.1 63.5 11.2 3.30 1.50
1/2 2 1019775 1019784 .34 20.6 16.0 12.7 30.2 41.4 77.0 46.0 71.0 12.7 3.30 1.50
5/8
3/4
7/8
3.25
4.75
6.5
1019793
1019819
1019837
1019800
1019828
1019846
.67
1.14
1.74
26.9
31.8
36.6
19.1
22.4
25.4
16.0
19.1
22.4
38.1
46.0
53.0
51.0
60.5
71.5
95.5
115
135
58.5
70.0
81.0
89.5
103
120
16.0
20.6
24.6
3.30
6.35
6.35
1.50
1.50
1.50
11
1 8.5 1019855 1019864 2.52 42.9 28.7 25.4 60.5 81.0 151 93.5 135 25.4 6.35 1.50
12
1-1/8 9.5 1019873 1019882 3.45 46.0 31.8 28.7 68.5 91.0 172 103 150 31.8 6.35 1.50
1-1/4 12 1019891 1019908 4.90 51.5 35.1 31.8 76.0 100 191 115 165 35.1 6.35 1.50
1-3/8 13.5 1019917 1019926 6.24 57.0 38.1 35.1 84.0 111 210 127 183 38.1 6.35 3.30
1-1/2 17 1019935 1019944 7.72 60.5 41.4 38.1 92.0 122 230 137 196 41.1 6.35 3.30
1-3/4 25 1019953 1019962 14.2 73.0 51.0 44.5 106 146 279 162 230 54.0 6.35 3.30
2
2-1/2
3
35
55
† 85
1019971
1019999
1020013
1019980
1020004
-
21.2
38.6
56
82.5
105
127
57.0
70.0
82.5
51.0
66.5
76.0
122
145
165
172
203
216
312
377
429
184
238
279
264
344
419
60.0
66.5
89.0
6.35
6.35
6.35
3.30
6.35
6.35
13
6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications.
† Individually Proof Tested with certification.
14
15
®
APPLICATION AND WARNING INFORMATION
SECTION 17
16
17
Copyright © 2023 The Crosby Group LLC All Rights Reserved 27
