2

INTRODUCTION OF TREE PLANTATION

Tree planting is the process of transplanting tree seedlings, generally for
forestry, land_reclamation, or landscaping purpose. It differs from the
transplantation of larger trees in arboriculture, and from the lower cost
but slower and less reliable distribution of tree seeds.

In silviculture the activity is known as reforestation, or a_forestation,

depending on whether the area being planted has or has not recently
been forested. It involves planting seedlings over an area of land where
the forest has been harvested or damaged_by_fire, disease or human
activity. Tree planting is carried out in many different parts of the world,
and strategies may differ widely across nations and regions and among
individual reforestation companies. Tree planting is grounded in forest
science, and if performed properly can result in the successful
regeneration of a deforested area. Reforestation is the commercial
logging industry's answer to the large-scale destruction of old_growth
forests, but a planted_forest rarely replicates the biodiversity and
complexity of a natural forest.

Because trees remove carbon_dioxide from the air as they grow, tree
planting can be used as a geoengineering technique to remove CO,
from the atmosphere. Desert_greening projects are also motivated by
improved biodiversity and reclamation of natural water systems, but also
improved economy and social welfare due to increased number of jobs
in farming and forestry.

R TR NTATI
HOW TO PLANT A TREE:-

While planting each of these different types of trees differs in the details,
all trees eventually end up in a hole. But not any old hole will do.
The most common mistake wheprplanting a tree is a digging hole,
which is both too deep and too nér:row. Too deep and the roots don’t
have access to sufficient oxygen to“ensure proper growth. Too narrow
and the root structure can’'t expand sufficiently to nourish and properly
/ anchor the tree.
o (1
) (4 As ageneral rule, trees should be transplanted no
ek deeper than the soil in which they were originally
grown. The width of the hole should be at least 3
times the diameter of the root ball or container or the spread of the roots
in the case of bare root trees. This will provide the tree with enough
worked earth for its root structure to establish itself.

When digging in poorly drained clay soil, it is important to avoid

‘glazing’. Glazing occurs when the sides and bottom of a hole
become smoothed forming a barrier, through which water has
difficulty passing. To break up the glaze, use a fork to work the bottom
and drag the points along the sides of the completed hole. Also, raising
the centre bottom of the hole slightly higher than the surrounding area.
This allows water to disperse, reducing the possibility of water pooling in
the planting zone.

Planting Balled and Bur lapped Trees

Balled and bur lapped (B & B) trees, although best planted as soon as
possible, can be stored for some time after purchase as long as the ball
is kept moist and the tree stored in a shady area. B & B trees should
always be lifted by the ball, never by the trunk. The burlap
surrounding the ball of earth and roots should either be cut away
completely (mandatory, in the case of synthetic or plastic burlap) or at
least pulled back from the top third of the ball (in the case of natural
burlap). Any string or twine should also be removed. Backfill soil
(combinations of peat moss, composted manure, topsoil, etc.) is then
placed in the hole surrounding the tree just to the height of the ball or
slightly lower to allow for some settling. Be careful not to compress the
back fill soil as this may prevent water from reaching the roots and the
roots from expanding beyond the ball.
 Planting Cong):ainer Trees
j=)

Container trees (fl‘:ough subject to greater heat and

" drying conditions than B and B) can also be stored for
a brief period of time after purchase as long as the soil
in the container is kept moist and the tree stored in a shady spot. The
procedure for planting container trees is similar to that for B & B trees.
In the case of metal or plastic containers, remove the container
completely. In the case of fiber containers, tear the
sides away.

removed from the container, check the

roots. If they nf:b‘ ) are tightly compressed or ‘pot bound’,
use your fingers or a blunt instrument (to
minimize root tearing) to carefully tease the fine roots
away from the tight mass and then spread the roots
prior to planting. In the case of extremely
woody compacted roots it may be necessary to use a spade to open up
the bottom half of the root system. The root system is then pulled apart
or ‘butter flied” prior to planting. Loosening the root structure in this way
is

extremely important in the case of container plants. Failure to do so may

result in the roots ‘girdling’ and killing the tree. At the very least, the roots
will have difficulty expanding beyond the dimensions of the original
container.

To further assist this, lightly break up even the soil outside the planting
zone. This allows roots that quickly move out of the planting zone to be
more resilient as they anchor into existing surrounding soil conditions.

Once the tree is seated in the hole, the original soil is then back-filled
into the hole to the soil level of the container. Again, remember not to
overly compress the back-filled soil especially by tramping it with your
feet. Compress gently using your hands instead.

Planting Bare-Rooted Trees

Planting bare-rooted trees is ahtle different as there is no soil
surrounding the roots. Most importa%«tly, the time between purchase and
planting is a more critical issue. Plant as soon as possible. When
purchasing bare-rooted trees, inspect the roots to ensure that they are
moist and have numerous lengths of fine root hairs (healthy). Care
should be taken to ensure that the roots are kept
Afi,\ - moist in the period between purchase and planting.
..~ Prune broken or damaged roots but save as much of
the root structure as you can.

To plant, first build a cone of earth in the centre of the hole around which
to splay the roots. Make sure that when properly seated on this cone
the tree is planted so that the ‘trunk flare’ is clearly visible and the
‘crown’, where the roots and top meet, is about two inches above the soil
level. This is to allow for natural settling.

Water, Mulch_and Fertilizer.

Watering
Newly planted trees should be watered at the time of planting. In
addition, during the first growing season, they should be watered at least
once a week in the absence of rain, more often during the height of the
summer. However, care should be taken not to overwater as this may
result in oxygen deprivation.

If you are uncertain as to whether a tree needs watering, dig down 6-8
inches at the edge of the planting hole. If the soil at that depth feels
powdery or crumbly, the tree needs water. Adequately moistened soil
should form a ball when squeezed.

Regular deep soakings are better than frequent light wettings. Moisture
should reach a depth of 12 to 18 inches below the soil surface to
encourage ideal root growth.

One new way to ensure a constant supply of moisture is through the use
of superabsorbent
polymer crystals that absorb moisture when the
surrounding soil is moist, and release it again when the soil dries out.
Mulching

6
o

To conserve moisture and promotefl'\'hater and air penetration, the back

filled soil surrounding newly-planted trees can be covered with mulch
consisting of material such as bark, wood chips or pine needles
(although the acidity associated with pine needles is not suited for many
plants). Mulch depth should be between 3 to 4 inches. Do not, under any
circumstances, cover the area surrounding the tree with plastic sheeting
since air and water movement are prevented. Porous landscape fabric
can be used since it freely allows water and air penetration.

Fertilizer

Since all soils have a history, it can be beneficial to get soil analyzed
properly for macronutrients such as Nitrogen (N), Phosphorus (P) and
Potassium (K), micronutrients, pH, soil type, and drainage. Although
many trees survive without fertilizer at time of planting, the majority of
plants suffer root loss and stress associated with movement between
ideal nursery grown conditions and the final planting.

To compensate for root loss during planting and to alleviate transplant

shock, treat your trees with mycorrhizal fungi and fertilizers with the right
formulation for the type of tree you are planting. A biostimulant can also
aid in root development and general tree health.

i =Wiri
Young trees should be able to support their own weight, but when they
are transplanted, they often need time to reestablish themselves. Also,
many nurseries plant their trees very close together to maximize use of
space and stake them to promote height growth at the expense of trunk
strength. When shopping for trees, look for trees with branches all along
the trunk - not just at the top. 3 ,

Once a tree is planted, it will concentrate its energy on

standing upright. If it is unable to do so, try thinning
out the upper branches to reduce wind resistance. If
that is not enough and you find you have to stake a , |/
tree, remember
the following" L B
1. Only stake the tree long enough for it to be able stand on its own.
2. Stakes should not be too tight -H-here should be room for the tree to
sway in the wind. N
©
a
3. Stakes should not be too loose - the tree should not rub against the
stakes.

4. Stakes should be buried at least 1.5 feet

underground to provide ample support.

Wr: i i

Wrapping

Wrapping refers to the technique of winding a crepe-

type paper around the barks of trees. Generally
speaking, you only need to consider doing this in the
northern United States and Canada to prevent the ‘sun-scalding’ of thin-
barked trees like soft maples and crabapples during the first one or two
winters after planting. Commercial tree-wrap is sold at nurseries and in
garden-supply stores. To wrap a tree, start at the bottom and wind the
paper around the tree to the level of the second branch. Fasten the
paper at the top with a tack. Don’t forget to remove the wrapping each
spring to prevent moisture buildup, disease and insect infestation.

Pruning
Use restraint when pruning your newly-planted trees. Prune only to
remove damaged or broken branches. Do not prune the top of the tree
as this may alter the structure of the tree excessively (check species
requirements) and may hamper carbohydrate production. Do not paint
the cuts with compounds (e.g. Latex) that prevent air from accessing the
wound, thereby slowing the healing process.

Tr: i T

There is always danger in moving plant material from one location to

another. Root material is sacrificed, and depending on the previous
state of the plant, this can be a severe stress. If necessary, it is
possible to transplant trees from one area of your property to another.
The key lies in ensuring that the tree to be transplanted has a good
healthy root ball and that the tree and ball together are not
unmanageably heavy.
« Start by tying the branches togethgploosely.
1)
j=
« Then dig a two-foot deep trench &ound the tree at
least one foot larger than the size of the root ball (or
as much intact viable root material as practical). Once
the trench is dug, undercut around the shrub. <
Carefully prune the roots extending from the ball as
you dig down.

* When the ball is partially exposed, begin to wrap the ball in burlap
starting from the base of the tree down using twine to secure the
wrapping. Keep digging until the ball is undercut and sitting on a soil
pedestal.

« Then carefully tilt the tree and ball and finish wrapping and securing the
burlap underneath.

« Then carefully tilt the tree and ball and finish wrapping and securing the
burlap underneath.

To help your tree establish itself when transplanted, treat the planting
area with mycorrhizal fungi, a form
specially
ulated fertilizer and
biostimulant.
Well that wasn't so difficult, was it? Now all you have to do is remember
that it can take a year or more for newly planted trees to adjust to their
new surroundings. During that time, you should make sure that they are
receiving sufficient water. In some cases, you may want to fertilize as
necessary.

BJECTIVE F TREE
PLANTATION

¢ To become self reliant in meeting companies pulpwood requirement

and thereby conserving the natural forest.
* To develop renewable and sustainable plantations in marginal and
degraded lands.
 To provide fair returns to the srm‘ll and marginal farmers.
To Educate and train the farme@ about modern technology in pulp
wood tree farming.
To improve Socio-Economic status of small and marginal farmers.
= Observe the rate of growth of seeds
« Recognize what do plants need to grow
- Differentiate between different seeds of different
plants
* Describe the life cycle of the plants
+ Describe the life cycles of the some animals
- Differentiate between the complete and incomplete
metamorphoses.
- Differentiate between animals and plants life cycles

EFEFECT OF TREE
PLANTATION

Decrease Global Warming

Produce Oxygen
Clean the Soil
Control Noise Pollution
Shade and Cool
VI Act as Windbreaks
VIIL Fight Soil Erosion
* What happened when there is no plantation?

. Increase Global Warming

=

. Reduce Oxygen
WN

. Unclean the Soil

. Increase in Noise Pollution
. Increase in Soil Erosion
s
 6. Decrease in Shade and Cool©®
—

Events fGotprint
SPSUS Sl ainable e
Air bearty
T Con en - - e
|-lean
"-G
e
e Bl
WaterReiewable
oo ecycling =
T et Liom i o

EXAMPLE F TREE
PLANTATION
India attempts to set record by planting 50
million trees in 24 hours
More than 800,000 volunteers took part in a mass tree-planting exercise
in the northern Indian state of Uttar Pradesh earlier this week, attempting
to plant 50 million trees in 24 hours

UttarPradesh's Chief Minister Akhilesh Yadav told volunteers assembled

in the city of Kannauj: “The world has realized

that serious efforts are needed to reduce carbon emissions to mitigate

the effects of global climate change. Uttar Pradesh has made a
beginning in this regard."

The state was hoping to set a world record for trees planted in one day,
which was previously set by Pakistan in 2013, with a comparatively
paltry 847,275 trees.
The Indian government has eamparked $6.2 billion for tree-planting,
aiming to increase forestation in Iirle;}rvith agreements made at the Paris
climate change summit in 2015. E‘

Edward Parson, environmental law professor at the University of

California, told_the_Christian_Science_Monitor: “This initiative can be a
step towards progress on some level, but it is at best a small contribution
to India’s greater climate commitments.”

“The biggest contribution of this tree

planting project is, apart from the
tokenism that it focuses on the major
issues” added Dr. Anit Mukherjee, policy
fellow with the Center for Global
Development. “It addresses many of the
big issues for India: Pollution,
deforestation, and land use.”

Officials involved with the project told the Associated Press that roughly
60 per cent of the saplings planted are expected to survive, with the rest
expected to die due to disease or lack of water.

It could take up to two months for the Guinness Book of World Records
to verify whether the Uttar Pradesh project has broken Pakistan’s record.

There is many example of tree plantation is made in west

Bengal along with India. Those pictures are given below:-