80W Single Output Switching Power Supply HLG-80H series

■ Features :
‧Universal AC input / Full range (up to 305VAC)
‧Built-in active PFC function
‧Protections: Short circuit / Over current / Over voltage / Over temperature
‧Cooling by free air convection
‧OCP point adjustable through output cable or internal potentiometer
‧IP67 / IP65 design for indoor or outdoor installations
‧"UL8750 listed" safety approved for HLG-80H- BL
‧Class 2 power unit
‧Three in one dimming function (1~10Vdc or PWM signal or resistance)
‧Suitable for LED lighting and moving sign applications
‧Compliance to worldwide safety regulations for lighting
‧Suitable for dry / damp / wet locations
‧5 years warranty (Note.10)

F 110 M M SELV IP65 IP67 (for HLG-80H-48/54 only) (except for HLG-80H-48/54)
(for HLG-80H-48/54BL only) (for HLG-80H-12~42BL only) ( Optional )
(except for BL type) (except for HLG-80H-48/54BL)

HLG-80H-12 A Blank : IP67 rated. Cable for I/O connection.

A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
BL (optional) : Contact MEAN WELL for details.
D (optional) : IP67 rated. Timer dimming function, contact MEAN WELL for details.

SPECIFICATION
MODEL HLG-80H-12 HLG-80H-15 HLG-80H-20 HLG-80H-24 HLG-80H-30 HLG-80H-36 HLG-80H-42 HLG-80H-48 HLG-80H-54
DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V
CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V
RATED CURRENT 5A 5A 4A 3.4A 2.7A 2.3A 1.95A 1.7A 1.5A
RATED POWER 60W 75W 80W 81.6W 81W 82.8W 81.9W 81.6W 81W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p
VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V
OUTPUT Can be adjusted by internal potentiometer A type only
CURRENT ADJ. RANGE
3 ~ 5A 3 ~ 5A 2.4 ~ 4A 2.04 ~ 3.4A 1.62 ~ 2.7A 1.38 ~ 2.3A 1.17 ~ 1.95A 1.02 ~ 1.7A 0.9 ~ 1.5A
VOLTAGE TOLERANCE Note.3 ±2.5% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME Note.8 1200ms,80ms/115VAC 500ms,80ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC
VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
INPUT
EFFICIENCY (Typ.) 88% 89% 90% 90.5% 91% 91% 91% 91% 91%
AC CURRENT (Typ.) 0.85A / 115VAC 0.425A / 230VAC 0.4A / 277VAC
INRUSH CURRENT (Typ.) COLD START 70A(twidth=485μs measured at 50% Ipeak) at 230VAC
LEAKAGE CURRENT <0.75mA / 277VAC
95 ~ 108%
OVER CURRENT Note.4
Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
14 ~ 17V 18 ~ 24V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V 54 ~ 63V 59 ~ 68V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT ± 0.03%/℃ (0 ~ 60℃ )
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08(except for HLG-80H-48/54V & HLG-80H-48/54BL), UL8750 listed for HLG-80H-□BL, EN61347-1,
SAFETY STANDARDS Note.7
EN61347-2-13 independent , optional models for J61347-1, J61347-2-13, IP65 or IP67 approved ; Design refer to UL60950-1, TUV EN60950-1
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
MTBF 357.8K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 195.6*61.5*38.8mm (L*W*H)
PACKING 0.84Kg; 16pcs/14.4Kg/0.54CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. A type only.
7. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
10. Refer to warranty statement.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to the mains.
 80W Single Output Switching Power Supply HLG-80H series

Mechanical Specification Case No.997A Unit:mm

Blank:(HLG-80H)
195.6
12 171.8
9.6

300±20 300±20
AC/L(Brown) T c ase 85.9 +V(Red)
AC/N(Blue) -V(B lack)
FG ( Green/Yell ow ) SJTW 18AWG×3C SVT 18AWG×2C

ψ4.2 ×4PL

※ T ca se: M ax. Case Temperatur e.

※IP67 rated. Cable for I/ O connection.

A Type:(HLG-80H-_A)
195.6
12 171.8
9.6

300±20 300±20
AC/L(Brown) T c ase 85.9 +V(Red)
AC/N(Blue) -V(B lack)
FG ( Green/Yell ow ) SJTW 18AWG×3C SVT 18AWG×2C
Io Vo
A DJ. A DJ.
ψ4.2 ×4PL

※ T ca se: M ax. Case Temperatur e.

※ IP65 rated. Out put voltage and constant current level can be adjusted through internal pot ent iometer.
(Can access by removing the rubber stopper on t he case. )

B Type:(HLG-80H-_B)
195.6
12 171.8
9.6
300±20
300±20 +V(Red)
AC/L(Brown) T c ase 85.9 -V(Black)
AC/N(Blue) SVT 18AWG ×2C
DIM+(B lue)
FG ( Green/Yell ow ) SJ TW 18AWG×3C
DIM-(White )
UL2517 18AWG ×2C
ψ4.2×4PL

※ T ca se: M ax. Case Temperatur e.

File Name:HLG-80H-SPEC 2014-07-31

 80W Single Output Switching Power Supply HLG-80H series

D Type(opti on):(HLG-80H-_D)

195.6
12 171.8
9.6

300±20 300±20
AC/L(Brown) T c ase 85.9 +V(Red)
AC/N(Blue) -V(B lack)
FG ( Green/Yell ow ) SJTW 18AWG×3C SVT 18AWG ×2C

ψ4.2 ×4PL

※ T ca se: M ax. Case Temperatur e.

※ IP67 rated. Tim er di mming fun ction , contact MEAN W ELL for details.

Block Diagram
Fosc : 100KHz

EMI FILTER PFC POWER RECTIFIERS +V

I/P & SWITCHING &
CIRCUIT -V
RECTIFIERS FILTER
O.L.P. DIM+
DIM-
(B Type)
O.T.P. O.L.P. DETECTION
FG
PWM & PFC CIRCUIT
CONTROL
O.V.P.

Derating Curve Static Characteristics

100
100
90
80
230VAC 80
Input only
60 70

60
40
50
20
40

-40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 305

AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz

File Name:HLG-80H-SPEC 2014-07-31

 80W Single Output Switching Power Supply HLG-80H series

Power Factor Characteristic

Constant Current Mode

1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0 277Vac
0 .8 8 230Vac
0 .8 6 115Vac
0 .8 4
0 .8 2
0 .8 0
0 .7 8
50% 60% 70% 80% 90% 100%
(80W)

LOAD

EFFICIENCY vs LOAD (48V Model)

HLG-80H series possess superior working ef ficiency that up to 91% can be reached in f ield applications.

92

88

84

80 277Vac

76 230Vac
115Vac
72

68

64
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD

DRIVING METHODS OF LED MODULE

There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "const ant voltage mode (CV) or constant current mode (CC )" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode [with LED driver, at area (A)] and CC mode [direct drive, at area (B)].

In t he constant current region, the highest voltage at the output of the driver
100
depends on t he configuration of the end sys tems.
Should there be any compat ibility issues, please contact MEAN WELL.
(A) Constant (B)
Voltage area Constant
Current area

60
(min.)

(C)
Hiccup
Protection

50 100 Io (%)

Typical LED power supply I-V curve

File Name:HLG-80H-SPEC 2014-07-31

 80W Single Output Switching Power Supply HLG-80H series

DIMMING OPERATION

+V(Red)
AC/L(Brown) -V(Black)
AC/N(Blue) HLG-80H
DIM+(B lue)
FG ( Green/Yell ow )
DIM-(White )

※ Built-in 3 in 1 dimming funct ion, IP67 rated. Out put constant current level can be adjusted t hrough out put cable by connect ing a resistance or
1 ~ 10Vdc or 10V PWM signal bet ween DIM+ and DIM-.
※ Please DO NOT connect "DIM-" t o "-V".
※ Reference resistance value for output current adjustment (Typical)
Single driver 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN
Resistance
value Multiple drivers
(N =drive r qua ntity for syn ch ronize d 10K Ω/N 20K Ω/N 30K Ω/N 40K Ω/N 50K Ω/N 60K Ω/N 70K Ω/N 80K Ω/N 90K Ω/N 100KΩ/N -----
d im mi n g op e ra ti on )

Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108%
※ 1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN
Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108%
※ 10V PWM signal for out put current adjustment (Typical): Frequency range : 100Hz ~ 3KHz
Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN
Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108%

※Using the built-in dimming function on B-type model can't turn the lighting fixture tot ally dark. Please refer t o the connection met hod below to
achieve 0% brightness of t he lighting fixt ure connecting t o the LED power s upply unit.
※Direct connect ing t o LEDs is suggested, but is not suitable for using additional drivers.
Dimming connection diagram f or t urning the lighting fixture ON/OFF :

N FG L

Relay Switch Adjust er

10K~100K Ohms resistance

1~10V DC Voltage
10V PWM Signal

Blue
Green/ DIM+
Whi te
Yellow HLG-80H DIM-
AC/L Blac k
Brown B Type V(-)
Red LED Li ghting Fixture
AC/N V(+)
Blue

Using a switch and relay can turn ON/OFF t he lighting fixture.

1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal bet ween DI M+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.

File Name:HLG-80H-SPEC 2014-07-31

 80W Single Output Switching Power Supply HLG-80H series

WATERPROOF CONNECTION
◎ Waterproof connector
Waterproof connect or can be assembled on t he output cable of HLG-80H to operate in dry/wet/ damp or outdoor environment .

AC HLG-80H
source I/P O/P

Size Pin Configuration (Female) Size Pin Configuration (Female)

M12 M15
4- PIN 5- PIN 2- PIN
5 A/PIN 5 A/PIN 12A/PIN
Orde r No. M 12- 04 M 12- 05 Orde r N o. M 15- 02
Sui tabl e Cur ren t 10A m ax. 10A m ax. Suitable Cur ren t 12A m ax . LED Lamp

◎ Cable Joi ner

CJ04-1 suitable for 14AWG~16AWG
66
CJ04-2 suitable for 18AWG~22AWG
26 20

Up to four wires can be connec ted through this cable joiner by

soldering or clamping by tools.

L ED La mp

HLG-80H
O/P Wir es

※CJ04 cable joiner can be purchased independently f or user's own assembly.

MEAN WELL order No. : CJ04-1, CJ04-2.

◎ Junction Box(Option )
171. 8 76 10
334 5

AC/L(Brown) +V(Red)
AC/N(Bl ue) -V(Black)
FG ( Green/Yell ow ) SVT 18AWG ×2C
SJTW 18AWG×3C

2-ψ5

3- PF 1/2" 3- PF 1/2"
150±20 150±20

※Optional junction box available for A / Blank - t ype , please contact MEAW WELL for details. 86
※HLG-80H- BL model s with junction box at both i nput and output sid e are li sted(modified by B type on ly).
File Name:HLG-80H-SPEC 2014-07-31