600W Constant Voltage + Constant Current LED Driver HLG-600H series

User’s Manual

     IP65 IP67 05

except for AB type (AB type except ) 

■  ■ 
‧ ‧ 
‧Metal housing with class I design ‧
‧Standby power consumption <0.5W at remote off ‧ 
‧ ‧ 
• ‧Ⅰ
 
‧
‧ ■ 
 

■ 

current output. HLG-600H operates from 90～305VAC and offers models with different rated voltage ranging
between 12V and 54V. Thanks to the high efficiency up to 96%, with the fanless design, the entire series is
able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing
and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-600H
is equipped with various function options, such as dimming methodologies, so as to provide the optimal design
flexibility for LED lighting system.

■ 
     





   

   
B   

AB  
  
   

File Name:HLG-600H-SPEC 2024-11-29

 600W Constant Voltage + Constant Current LED Driver HLG-600H series
SPECIFICATION
MODEL HLG-600H-12 HLG-600H-15 HLG-600H-20 HLG-600H-24 HLG-600H-30 HLG-600H-36 HLG-600H-42 HLG-600H-48 HLG-600H-54
DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V
CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V
RATED CURRENT 40A 36A 28A 25A 20A 16.7A 14.3A 12.5A 11.2A
RATED POWER 480W 540W 560W 600W 600W 601.2W 600.6W 600W 604.8W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p
Adjustable for A/AB-Type only (via built-in potentiometer)
VOLTAGE ADJ. RANGE
10.2 ~ 12.6V 12.7 ~ 15.8V 17 ~ 21V 20.4 ~ 25.2V 25.5 ~ 31.5V 30.6 ~ 37.8V 35.7 ~ 44.1V 40.8 ~ 50.4V 45.9 ~ 56.7V
OUTPUT
Adjustable for A/AB-Type only (via built-in potentiometer)
CURRENT ADJ. RANGE
20 ~ 40A 18 ~ 36A 14 ~ 28A 12.5 ~ 25A 10 ~ 20A 8.3 ~ 16.7A 7.1 ~ 14.3A 6.2 ~ 12.5A 5.6 ~ 11.2A
VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME Note.6 500ms, 80ms/ 115VAC, 230VAC
HOLD UP TIME (Typ.) 15ms / 115VAC, 230VAC
90 ~ 305VAC 127 ~ 431VDC
VOLTAGE RANGE Note.5
(Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE 47 ~ 63Hz
PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.93/277VAC @ full load
POWER FACTOR (Typ.)
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20% (@ load≧50% /115VAC, 230VAC; @ load≧75%/277VAC)
TOTAL HARMONIC DISTORTION
(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
EFFICIENCY 230VAC 92% 93.5% 94.5% 95% 95% 95.5% 96% 96% 96%
INPUT
(Typ.) 277VAC 92.5% 93.5% 94.5% 95% 95% 95.5% 96% 96% 96%
AC CURRENT (Typ.) 7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC
INRUSH CURRENT(Typ.) COLD START 70A(twidth=1000μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
LEAKAGE CURRENT <0.75mA / 277VAC
STANDBY POWER CONSUMPTION <0.5W at remote off
95 ~ 108%
OVER CURRENT Note.4
Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed
PROTECTION
13 ~ 16V 16.5 ~ 20.5V 22 ~ 26V 26 ~ 30V 32.5 ~ 36.5V 39.5 ~ 43.5V 46 ~ 50V 52.5 ~ 56.5V 59 ~ 63V
OVER VOLTAGE
Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
REMOTE ON/OFF CONTROL Power on : "High" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit
FUNCTION
5V STANDBY 5V SB : 5V@0.5A ; tolerance ±5%, ripple : 100mVp-p(max.)
WORKING TEMP. Tcase= -40 ~ +90℃ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
MAX. CASE TEMP. Tcase= +90℃
WORKING HUMIDITY 20 ~ 95% RH non-condensing
ENVIRONMENT
STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 55℃)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL60950-1, UL8750(type”HL”), CSA C22.2 No. 250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent,
SAFETY STANDARDS Note.7 BS EN/EN62384, IP65 or IP67, J61347-1, J61347-2-13, GB19510.1,GB19510.14, EAC TP TC 004,
AS/NZS 60950.1(by CB)(AB type except ),KC61347-1, KC61347-2-13(except for AB type) approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 10)
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧50%) ; BS EN/EN61000-3-3, EAC TP TC 020;
EMC EMISSION Note.7
GB/T 17743,GB17625.1, KS C 9815, KS C 9547
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55024, light industry level (surge immunity
EMC IMMUNITY
Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020; KS C 9815, KS C 9547
MTBF 913.4K hrs min. Telcordia SR-332 (Bellcore) ; 76.9K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 280*144*48.5mm (L*W*H)
PACKING 3.9Kg; 4pcs/16.6Kg/0.9CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model . Please contact MEAN WELL for details.
8. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
10.driver on a
 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
11. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
12. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
13. For A/AB type need to consider build in using to comply with Type HL application.
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HLG-600H-SPEC 2024-11-29
 600W Constant Voltage + Constant Current LED Driver HLG-600H series

BLOCK DIAGRAM
fosc : 100KHz(5V)
70KHz(12V~54V)
+5VSB
DETECTION
CIRCUIT

RECTIFIERS
POWER SWITCHING
& +5VSB
PWM CONTROL
FILTER

EMI FILTER PFC POWER RECTIFIERS +V

I/P & SWITCHING &
CIRCUIT -V
RECTIFIERS FILTER
O.L.P. DIM+
DIM-
(B Type)
FG DETECTION
O.L.P.
PWM & PFC CIRCUIT
PFC CONTROL
CONTROL
O.V.P.

PS/ON PS/ON
CONTROL

DRIVING METHODS OF LED MODULE

※ This series is able to work in either Constant Current mode (a direct drive way) or
Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

In the constant current region, the highest voltage at the output of the driver
100
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
(A) Constant (B)
Voltage area Constant
Current region
Vo(%)

50 100 Io (%)

Typical output current normalized by rated current (%)

File Name:HLG-600H-SPEC 2024-11-29

 600W Constant Voltage + Constant Current LED Driver HLG-600H series

DIMMING OPERATION

RC+(Brown)
RC- & GND(Black)
+5V SB(Yellow)
DIM+(Purple)
DIM-(Pink)
FG (Green/Yellow) -V(Black)
AC/L(Brown) HLG-600H +V(Red)
AC/N(Blue) -V(Black)
+V(Red)

※ 3 in 1 dimming function (for B/AB-Type)

‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
‧Dimming source current from power supply: 1 0 0μA (typ.)
◎ Applying additive 0 ~ 10VDC 100%
90%
80%
+
+V + Output current (%) 70%
60%
-
-V - 50%
DIM+ 40%
+
30%
Additive Voltage
- 20%
DIM-
10%

“DO NOT connect "DIM- to -V" 0%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage

◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100%
90%
80%
+
+V + 70%
Output current (%)

60%
-
-V - 50%
DIM+ 40%

Additive PWM signal 30%

20%
DIM-
10%

“DO NOT connect "DIM- to -V" 0%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input

◎ Applying additive resistance: 100%

90%

+ 80%
+V +
70%
Output current (%)

- 60%
-V -
50%
DIM+
40%
Additive Resistance 30%

DIM- 20%
10%
“DO NOT connect "DIM- to -V" 0%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation)
Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%. Dimming input: Additive resistance

2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

File Name:HLG-600H-SPEC 2024-11-29

 600W Constant Voltage + Constant Current LED Driver HLG-600H series

OUTPUT LOAD vs TEMPERATURE

100 100

80 80

60 60

LOAD (%)
LOAD (%)

40 40

20 20

-40 -25 -10 0 15 30 50 55 60 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 90 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta (℃) Tcase (℃)

◎ If HLG-600H operates in constant current mode with the

rated current, the maximum workable Ta is 55℃.

STATIC CHARACTERISTICS POWER FACTOR(PF) CHARACTERISTIC

※Tcase at 80℃
Constant Current Mode
100
1.00
0.98
90 0.96
80 0.94
0.92
70 0.90 277V
PF

60 0.88 230V
LOAD (%)

0.86 115V
50
0.84
40 0.82
0.80

90 115 125 135 145 155 165 175 180 200 230 305 0.78
50% 60% 70% 80% 90% 100%
INPUT VOLTAGE (V) 60Hz (600W)
LOAD

※ De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD

HLG-600H series possess superior working efficiency that up to 96%
※ 48V Model, Tcase at 80℃ can be reached in field applications.
※ 48V Model, Tcase at 80℃
16 100
14 98
12 96
EFFICIENCY (%)

10 94
277V
THD(%)

8 277VAC 92
230V
6 230VAC 90
115V
115VAC
4 88

2 86

0 84
50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

LOAD LOAD
File Name:HLG-600H-SPEC 2024-11-29
 600W Constant Voltage + Constant Current LED Driver HLG-600H series

LIFETIME

120

100

80
LIFETIME(Kh)

60

40

20

0
20 30 40 50 60 70 80 90

Tcase ( ℃ )

File Name:HLG-600H-SPEC 2024-11-29

 600W Constant Voltage + Constant Current LED Driver HLG-600H series

MECHANICAL SPECIFICATION Case No. 228 Unit:mm Tolerance:±1

※A-Type

280
13.4 253.2
15 8.9

300±20
UL2517 22AWG×3C RC+(Brown)
RC- & GND(Black)
SJTW 14AWG×2C +5V SB(Yellow)
144
97

300±20 126.6 -V(Black)

FG (Green/Yellow) T case tc +V(Red)
Io Vo
AC/L(Brown) ADJ. ADJ. -V(Black)
AC/N(Blue) +V(Red)

47
SJTW 14AWG×2C
15

SJOW 17AWG×3C & H05RN-F 3×1.0mm

2

ψ4.5×4PL
LED
‧tc : Max. Case Temperature
25±2

48.5
※B-Type

280
13.4 253.2
8.9
15

350±20
300±20
RC+(Brown)
UL2517 22AWG×3C RC- & GND(Black)
+5V SB(Yellow)
UL2517 18AWG×2C
144

DIM+(Purple)
97

300±20 126.6 DIM-(Pink)

FG (Green/Yellow) T case tc SJTW 14AWG×2C -V(Black)
AC/L(Brown) +V(Red)
AC/N(Blue) -V(Black)
47

SJTW 14AWG×2C +V(Red)

15

SJOW 17AWG×3C & H05RN-F 3×1.0mm

2

ψ4.5×4PL

‧tc : Max. Case Temperature

25±2
48.5

File Name:HLG-600H-SPEC 2024-11-29

 600W Constant Voltage + Constant Current LED Driver HLG-600H series

※AB-Type

280
13.4 253.2
15 8.9

350±20
300±20
RC+(Brown)
UL2517 22AWG×3C RC- & GND(Black)
+5V SB(Yellow)
UL2517 18AWG×2C
144

DIM+(Purple)
97

300±20 126.6 DIM-(Pink)

FG (Green/Yellow) T case tc -V(Black)
Io Vo SJTW 14AWG×2C
+V(Red)
AC/L(Brown) ADJ. ADJ.
AC/N(Blue) -V(Black)

47
SJTW 14AWG×2C +V(Red)
15

SJOW 17AWG×3C & H05RN-F 3×1.0mm

2

ψ4.5×4PL

‧tc : Max. Case Temperature

25±2

48.5
※Blank-Type

280
13.4 253.2
8.9
15

300±20
UL2517 22AWG×3C RC+(Brown)
RC- & GND(Black)
SJTW 14AWG×2C +5V SB(Yellow)
144
97

300±20 126.6 -V(Black)

FG (Green/Yellow) T case tc +V(Red)
AC/L(Brown) -V(Black)
AC/N(Blue) +V(Red)
47

SJTW 14AWG×2C
15

SJOW 17AWG×3C & H05RN-F 3×1.0mm

2

ψ4.5×4PL
LED
‧tc : Max. Case Temperature
25±2
48.5

INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html

File Name:HLG-600H-SPEC 2024-11-29