PULLER

Model: SPW 16

● Bull wheel Puller with integrated reel winder for pulling

1 rope up to a maximum pull force of 17 to
● Double bull wheel drive with a bull wheel diameter of 620 mm
● Reel winder for loading/unloading reels independently
● With automatic and continuously adjustable rope guiding
device
● Special reel shaft => allows one single operator to change
the reels very quickly without tools
● Robust machine, constructed for highest reliability of
operation, simple operation and minimal maintenance
● Operation of the machine via cable remote control (optional
also via radio remote control) => good overview, low noise
level and a safe position for the operator operator

Technical data in puller mode: Hydraulic drive system:

• Max. pull force: 17.000 daN • In both bull wheels a complete driving unit consisting of planetary
• Continuous pull force: 16.000 daN gear, brake and hydraulic motor is integrated => fully enclosed and
therefore requiring minimal maintenance
• Continuously adjustable speed: 0 - 5 km/h (83 m/min)
at 18.000 daN: max. 2,6 km/h (43 m/min) • 2 emergency multiple-disc brakes, automatically activated
• High quality control technique enables inching even under maximum
load
Control of the machine:
• Highly effective oil cooling system, electrically activated and controlled
• Cable remote control with 10 m cable (functions: rope in/out, via thermostat, designed for extreme operating conditions
emergency stop); rope can be indefinitely controlled in/out via a
joystick • Hydraulic hoses and screw connections with a special sealing system
for a long service life without leakage
• Emergency operation for controlling the machine by hand
• Hydraulic differential system of the bull wheel drives => low stress
• Control panel with display of the pull force and all instruments to for ropes and planetary gears
control engine, hydraulic and electrical systems
• Pull force switch-off system (inductive system for highest safety of
operation Integrated reel winder:
• Digital meter counter and digital tachometer • Hydraulic drive of the reels and the rope guiding device with gear unit
and hydraulic motor => fully enclosed => requiring minimal
• Preparation for a quick installation of a pull force recorder maintenance
• With free wheel device and mechanical disc-brake system (optional)
Cover: for a controlled pull out of the rope
• Lockable cover made of thick-walled aluminium sheet, protects the • Reel lifting device for steel reels with Ø 1.100 - 1.400 mm
diesel engine, the hydraulic and the electrical systems => increases • Hydraulic lifting and lowering of the reels for loading/unloading
the reliability of the machine and is noise reducing
• Automatic rope guiding device; can be continuously adjusted without
tools to all ropes diameters and different reel widths
Double wheel drive:
• 2 bull wheels with a diameter of 620 mm Engine:
• Each with 11 grooves made of hardened steel • Water-cooled DEUTZ diesel engine with 174 kW (237 HP) at 2.300 rpm
• Grooves designed for connectors up to Ø 60 mm • Low speed => long life cycle and low noise level
• Automatic rope clamping with integrated grounding device • 12 V system with high capacity battery for a safe start also at cold
=> rope anchoring not necessary during change of reels temperatures

Weight, dimensions and noise level:

• Weight: approx. 5.400 kg
• Length x width x height: approx. 4.750 x 2.280 x 2.160 mm
(dimensions can be reduced for shipment)
• Low noise level: approx. 80 dB (A)

ZECK GMBH Tel. +49 / (0) 9542 / 9494 - 0 B2-400

Columba-Schonath-Str. 6 Fax +49 / (0) 9542 / 9494 - 94
D-96110 Schesslitz GERMANY www. zeck-gmbh.com · e-mail: info@zeck-gmbh.com 082005
 Frame and support: Optional equipment:
• Stable steel frame with anchoring eyes • Special maintenance-free precleaner for the air filter; prevent engine
• Central lifting ring for easy loading by crane overheating and reduce maintenance work at the diesel engine
• Front support via hydraulic backstay for high stability and a fast and • Mechanical disc-brake system for reel winder
easy anchoring; with integrated eyes for anchoring of ropes • Quick coupling to operate a separate reel winder
• Back support via 2 hydraulic supporting cylinders • Grounding plate with holding device
• Noise reduction kit for cover
Standard chassis: • Biodegradable hydraulic oil
• 2 axle chassis with rigid axles with parking brake • Electronic pull force recorder to document the pull force
Optional: pneumatic brake system, lighting system, mudguards and • Radio remote control (additional functions: ignition; engine starting)
registration
• Reels with detachable or non-detachable flange with a Ø 1.100 or
• Stable towing bar with height-adjustable towing eye with Ø 40 mm 1.400 mm
(optional: Ø of towing eye according to customer requirement)
• Ropes (steel or synthetic fibre ropes) on request
Optional chassis: • Special equipment or special models on request
• 2 axle chassis with spring-mounted axle, pneumatic-hydraulic brake
system (with integrated brake cylinders), parking brake, lighting
system and mudguards
Optional: registration as high-speed trailer (in Germany up to 80 km/h)

Modifications and errors excepted. Illustrations show in part optional equipment. Technical data varied according to model. Machine performance is calculated at sea level at 20°C.

ZECK GMBH Tel. +49 / (0) 9542 / 9494 - 0 B2-400

Columba-Schonath-Str. 6 Fax +49 / (0) 9542 / 9494 - 94
D-96110 Schesslitz GERMANY www. zeck-gmbh.com · e-mail: info@zeck-gmbh.com 082005