HV

TRANSMISSION
LINE
STRINGING
MACHINES AND EQUIPMENT
 MACHINES AND EQUIPMENT
HV TRANSMISSION LINE STRINGING

T19_EN
 HYDRAULIC PULLERS
01 HYDRAULIC PULLERS 05

HYDRAULIC TENSIONERS
02 HYDRAULIC TENSIONERS 19

PULLER-TENSIONERS
03 HYDRAULIC PULLER-TENSIONERS 33

HYDRAULIC WINCHES
04 HYDRAULIC SERVICE WINCHES 47

REEL-STANDS
05 REEL-STANDS and TRAILERS 53

REELLS & ROPES

06 REELS and ROPES 63

PULLEY BLOCKS
07 PULLEY BLOCKS 71

EQUIPMENT

08 EQUIPMENT 89
LIGHT ALLOY

09 LIGHT ALLOY EQUIPMENT 103

CONTROL INSTRUMENTS

10 CONTROL INSTRUMENTS 117

 01
HYDRAULIC PULLERS

www.omac-italy.it 05
HYDRAULIC PULLER

F265.20

HYDRAULIC PULLERS
max pull 20 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines and optics fibre cables.
One hydraulic circuit allows to continuously vary the speed in both
directions by operating one control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 200 mm Feeding gasoline Max pull 20 kN
Max nylon rope diam. 12 mm Power 20,5 hp / 15 kW Speed at max pull 18 m/min
Max steel rope diam. 8 mm Cooling air Max speed 65 m/min
Starting electric with battery 12 V Pull at max speed 3,5 kN

REEL DIMENSIONS AND WEIGHT (without rope)

Type extractable self-loading Dimensions 2,30x1,50x1,20 m
Capacity: Weight 565 kg
Nylon rope Ø 12 mm: 700 m
Steel rope Ø 8 mm: 500 m

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 003 Damped axle for towing on road, with mechanical brake
steel rope. (homologation excluded).
• Dynamometer and preselector of max pull force. 028.3 Air cooled diesel engine with electric starting 19 HP/ 14 kW
• Mechanical metercounter. (it adds 50 kg to the machine weight).
• Safety negative hydraulic brake. 067 Telescopic rod to lay underground cables (art.F277).
• Damped axle with tires and adjustable drawbar for towing at low 069.2 Electronic device with USB port, to save the data of the pull.
speed in the job-site. 069.5 Printer with accessories.
• Mechanical stabilisers on pull side and jack-arm with wheel on 083.1 Rope transmission pulley, 360° revolving, fit for pulling
drawbar side. underground cables, predisposed to receive the telescopic
• Attachments for anchoring and for lifting. bar mod. F276 and F277.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Built-in reel-winder with automatic rope-winder and extractable
reel Ø750 mm.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 07 2095-0 • rev. 04:20 EN

 HYDRAULIC PULLER

F275.30
HYDRAULIC PULLERS

max pull 30 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 250 mm Feeding diesel Max pull 30 kN
Capstan grooves 7 Power 35 hp / 26 kW Speed at max pull 1,2 km/h
Max rope diameter 13 mm 35 hp / 26 kW * Max speed 3,8 km/h
Max joint diameter 40 mm Cooling water Pull at max speed 12 kN
Dimensions LxWxH 2,10x1,60x1,60 m Electric plant 12 V

Weight (without rope) 1100 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 007 Chassis with damped axle, overrun brake and drawbar for
steel rope. towing on road (homologation excluded).
• Machine control panel equipped with built-in electronic 037 Remote control by cable, with 10 m of cable.
instrument DEG 4.0 featuring a 7’’ large graphic colour display 038.1 Pushbutton radio-control.
and a USB port. 038 Radio-control (max distance 100 m).
• Electronic instrument by-pass. 045.3 Manual clamp for rope.
• Safety negative hydraulic brake. 047 Hydraulic front stabilisers.
• Chassis with rigid axle, manual brake and detachable drawbar for 067 Telescopic rod to lay underground cables (mod.F277).
towing at low speed in job-site. 069.5 Printer with accessories, complete with case.
• Mechanical front and back stabilisers. 083.1 Rope transmission pulley, 360° revolving, fit for pulling
• Attachments for anchoring and for lifting. underground cables, predisposed to receive the telescopic
• Heat exchanger to cool the oil in the hydraulic circuit. bar mod. F 276 and F277.
• Reelwinder fit for a 1400-mm-dia reel, with automatic
ropewinder.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 08 2120-1 • rev. 13:19 EN

HYDRAULIC PULLER

F280.35

HYDRAULIC PULLERS
max pull 35 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 325 mm Feeding diesel Max pull 35 kN
Capstan grooves 7 Power 35 hp / 26 kW Speed at max pull 1,2 km/h
Max rope diameter 16 mm 35 hp / 26 kW * Max speed 4 km/h
Max joint diameter 45 mm Cooling water Pull at max speed 13 kN
Dimensions LxWxH 2,15x1,60x1,55 m Electric plant 12 V

Weight (without rope) 1700 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 007 Chassis with damped axle, overrun brake and drawbar for
steel rope. towing on road (homologation excluded).
• Machine control panel equipped with built-in electronic 037 Remote control by cable, with 10 m of cable.
instrument DEG 4.0 featuring a 7’’ large graphic colour display 038.1 Pushbutton radio-control.
and a USB port. 038 Radio-control (max distance 100 m).
• Maintenance-free load cell reading system. 045.3 Manual clamp for rope.
• Electronic instrument by-pass. 047 Hydraulic front stabilisers.
• Safety negative hydraulic brake. 067 Telescopic rod to lay underground cables (mod.F277).
• Chassis with rigid axle, manual brake and detachable drawbar for 069.5 Printer with accessories, complete with case.
towing at low speed in job-site. 083.1 Rope transmission pulley, 360° revolving, fit for pulling
• Hydraulic back stabilisers and manual front stabilisers. underground cables, predisposed to receive the telescopic
• Attachments for anchoring and for lifting. bar mod. F 276 and F277.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Reelwinder fit for a 1400-mm-dia reel, with automatic
ropewinder.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 09 2135-0 • rev. 14:19 EN

 HYDRAULIC PULLER

F230.45
HYDRAULIC PULLERS

max pull 45 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 400 mm Feeding diesel Max pull 45 kN
Capstan grooves 7 Power 57 hp / 42 kW Speed at max pull 2,2 km/h
Max rope diameter 16 mm 57 hp / 42 kW * 2,2 km/h *

Max joint diameter 50 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 2,85x1,80x1,85 m Electric plant 12 V Pull at max speed 17 kN

17 kN *
Weight (without rope) 2100 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 007 Chassis with damped axle, overrun brake and drawbar for
steel rope. towing on road (homologation excluded).
• Machine control panel equipped with built-in electronic 028.7 Device to start the diesel engine and the hydraulic circuit at
instrument DEG 4.0 featuring a 7’’ large graphic colour display low temperatures (up to -30°C).
and a USB port. 037 Remote control by cable, with 10 m of cable.
• Maintenance-free load cell reading system. 038 Radio-control (max distance 100 m).
• Electronic instrument by-pass. 045.2 Automatic clamp for rope.
• Device for pull force setting which allows to maintain the pre-set 045.3 Manual clamp for rope.
force even at speed “0”. 047 Hydraulic front stabilisers.
• Safety negative hydraulic brake. 069.5 Printer with accessories, complete with case.
• Chassis with rigid axle, manual brake and detachable drawbar for 083.1 Rope transmission pulley, 360° revolving, fit for pulling
towing at low speed in job-site. underground cables, predisposed to receive the telescopic
• Hydraulic back stabilisers and manual front stabilisers. bar mod. F 276 and F277.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Reelwinder fit for a 1600-mm-dia reel, with automatic
ropewinder.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 10 2152-0 • rev. 06:18 EN

HYDRAULIC PULLER

F230.70

HYDRAULIC PULLERS
max pull 70 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 400 mm Feeding diesel Max pull 70 kN
Capstan grooves 8 Power 84 hp / 62 kW Speed at max pull 1,8 km/h
Max rope diameter 18 mm 100 hp / 75 kW * 2,0 km/h *

Max joint diameter 50 mm Cooling water Max speed 4,5 km/h

Dimensions LxWxH 3,20x1,95x2,00 m Electric plant 12 V Pull at max speed 32 kN

36 kN *
Weight (without rope) 2400 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 007 Chassis with damped axle, overrun brake and drawbar for
steel rope. towing on road (homologation excluded).
• Machine control panel equipped with built-in electronic 028.7 Device to start the diesel engine and the hydraulic circuit at
instrument DEG 4.0 featuring a 7’’ large graphic colour display low temperatures (up to -30°C).
and a USB port. 037 Remote control by cable, with 10 m of cable.
• Maintenance-free load cell reading system. 038 Radio-control (max distance 100 m).
• Electronic instrument by-pass. 045.2 Automatic clamp for rope.
• Device for pull force setting which allows to maintain the pre-set 045.3 Manual clamp for rope.
force even at speed “0”. 047 Hydraulic front stabilisers.
• Safety negative hydraulic brake. 069.5 Printer with accessories, complete with case.
• Chassis with rigid axle, manual brake and detachable drawbar for 083.1 Rope transmission pulley, 360° revolving, fit for pulling
towing at low speed in job-site. underground cables, predisposed to receive the telescopic
• Hydraulic back stabilisers and manual front stabilisers. bar mod. F 276 and F277.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Reelwinder fit for a 1600-mm-dia reel, with automatic
opewinder.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 11 2165-0 • rev. 10:18 EN

 HYDRAULIC PULLER

F235.90
HYDRAULIC PULLERS

max pull 90 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 450 mm Feeding diesel Max pull 90 kN
Capstan grooves 9 Power 142 hp / 105 kW Speed at max pull 2,5 km/h
Max rope diameter 20 mm 142 hp / 105 kW * 2,5 km/h *

Max joint diameter 60 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 3,70x2,15x2,10 m Electric plant 12 V Pull at max speed 42 kN

42 kN *
Weight (without rope) 3900 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 008 Axle with leaf spring suspensions, drawbar, pneumatic bra-
steel rope. king system, tires and lights for towing on the road (without
• Machine control panel equipped with built-in electronic homologation).
instrument DEG 4.0 featuring a 7’’ large graphic colour display 006.1 Lights for towing on the road.
and a USB port. 006.2 Pneumatic braking system.
• Maintenance-free load cell reading system. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Electronic instrument by-pass. low temperatures (up to -30°C).
• Device for pull force setting which allows to maintain the pre-set 037 Remote control by cable, with 10 m of cable.
force even at speed “0”. 038 Radio-control (max distance 100 m).
• Safety negative hydraulic brake. 045.2 Automatic clamp for rope.
• Chassis with rigid axle, manual brake and detachable drawbar for 045.3 Manual clamp for rope.
towing at low speed in job-site. 047 Hydraulic front stabilisers.
• Hydraulic back stabilisers and manual front stabilisers. 069.5 Printer with accessories, complete with case.
• Attachments for anchorage and for lifting. 084 Bigger reelwinder fit for a 1900-mm-dia reel.
• Heat exchanger to cool the oil in the hydraulic circuit. 115 Setting-up for pulling 2 ropes simultaneously.
• Reelwinder fit for a 1600-mm-dia reel, with automatic 014 Second reel-winder, ideal to complete the opt. 115.
ropewinder.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 12 2172-0 • rev. 11:18 EN

HYDRAULIC PULLER

F260.140

HYDRAULIC PULLERS
max pull 140 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 600 mm Feeding diesel Max pull 140 kN
Capstan grooves 10 Power 176 hp / 130 kW Speed at max pull 1,8 km/h
Max rope diameter 24 mm 176 hp / 130 kW * 1,8 km/h *

Max joint diameter 60 mm Cooling water Max speed 4,5 km/h

Dimensions LxWxH 3,95x2,30x2,20 m Electric plant 12 V Pull at max speed 55 kN

55 kN *
Weight (without rope) 4900 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 008 Axle with leaf spring suspensions, drawbar, pneumatic bra-
steel rope. king system, tires and lights for towing on the road (without
• Machine control panel equipped with built-in electronic homologation).
instrument DEG 4.0 featuring a 7’’ large graphic colour display 006.1 Lights for towing on the road.
and a USB port. 006.2 Pneumatic braking system.
• Maintenance-free load cell reading system. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Electronic instrument by-pass. low temperatures (up to -30°C).
• Device for pull force setting which allows to maintain the pre-set 037 Remote control by cable, with 10 m of cable.
force even at speed “0”. 038 Radio-control (max distance 100 m).
• Safety negative hydraulic brake. 045.2 Automatic clamp for rope.
• Chassis with rigid axle, manual brake and detachable drawbar for 045.3 Manual clamp for rope.
towing at low speed in job-site. 047 Hydraulic front stabilisers.
• Hydraulic back stabilisers and manual front stabilisers. 069.5 Printer with accessories, complete with case.
• Attachments for anchoring and for lifting. 084 Bigger reelwinder fit for a 1900-mm-dia reel.
• Heat exchanger to cool the oil in the hydraulic circuit. 115 Setting-up for pulling 2 ropes simultaneously.
• Reelwinder fit for a 1600-mm-dia reel, with automatic 014 Second reel-winder, ideal to complete the opt. 115.
ropewinder. 174.1 Synchronising device for the connection of 2 machines to
pull 2 ropes simultaneously, complete with cable-control
(20 m).

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 13 2190-1 • rev. 12:18 EN

 HYDRAULIC PULLER

F260.160
HYDRAULIC PULLERS

max pull 160 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 600 mm Feeding diesel Max pull 160 kN
Capstan grooves 10 Power 280 hp / 209 kW Speed at max pull 2,5 km/h
Max rope diameter 24 mm 306 hp / 225 kW * 2,7 km/h *

Max joint diameter 60 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 4,10x2,30x2,30 m Electric plant 24 V Pull at max speed 80 kN

85 kN *
Weight (without rope) 5200 kg

ALSO AVAILABLE F260.190

Max pull 190 kN
Speed at max force 2,2 km/h
2,4 km/h *
Max speed 5 km/h
Pull at max speed 80 kN
87 kN *

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 008 Axle with leaf spring suspensions, drawbar, pneumatic
steel rope. braking system, tires and lights for towing on the road
• Machine control panel equipped with built-in electronic (without homologation).
instrument DEG 4.0 featuring a 7’’ large graphic colour display 006.1 Lights for towing on the road.
and a USB port. 006.2 Pneumatic braking system.
• Maintenance-free load cell reading system. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Electronic instrument by-pass. low temperatures (up to -30°C).
• Device for pull force setting which allows to maintain the pre-set 037 Remote control by cable, with 10 m of cable.
force even at speed “0”. 038 Radio-control (max distance 100 m).
• Safety negative hydraulic brake. 045.2 Automatic clamp for rope.
• Chassis with rigid axle, manual brake and detachable drawbar for 045.3 Manual clamp for rope.
towing at low speed in job-site. 047 Hydraulic front stabilisers.
• Hydraulic back stabilisers and manual front stabilisers. 069.5 Printer with accessories, complete with case.
• Attachments for anchoring and for lifting. 084 Bigger reelwinder fit for a 1900-mm-dia reel.
• Heat exchanger to cool the oil in the hydraulic circuit. 115 Setting-up for pulling 2 ropes simultaneously.
• Reelwinder fit for a 1600-mm-dia reel, with automatic 014 Second reel-winder, ideal to complete the opt. 115.
ropewinder. 174.1 Synchronising device for the connection of 2 machines to
pull 2 ropes simultaneously, complete with cable-control
(20 m).
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 14 2194-2 • rev. 09:18 EN

HYDRAULIC PULLER

F375.240

HYDRAULIC PULLERS
max pull 240 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 800 mm Feeding diesel Max pull 240 kN
Capstan grooves 12 Power 380 hp / 280 kW Speed at max pull 2,5 km/h
Max rope diameter 32 mm 395 hp / 291 kW * 2,6 km/h *

Max joint diameter 80 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 5,10x2,50x3,00 m Electric plant 24 V Pull at max speed 130 kN

135 kN *
Weight (without rope) 9500 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 005.1 Chassis with tandem axle, drawbar, suspensions, air braking
steel rope. system, tires and lights for towing on the road
• Machine control panel equipped with built-in electronic (homologation excluded).
instrument DEG 4.0 featuring a 7’’ large graphic colour display 008 Axle with leaf spring suspensions, drawbar, pneumatic
and a USB port. braking system, tires and lights for towing on the road
• Maintenance-free load cell reading system. (without homologation).
• Electronic instrument by-pass. 006.1 Lights for towing on the road.
• Device for pull force setting which allows to maintain the pre-set 006.2 Pneumatic braking system.
force even at speed “0”. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Safety negative hydraulic brake. low temperatures (up to -30°C).
• Chassis with rigid axle, manual brake and detachable drawbar for 037 Remote control by cable, with 10 m of cable.
towing at low speed in job-site. 038 Radio-control (max distance 100 m).
• Hydraulic back and front stabilisers. 045.2 Automatic clamp for rope.
• Attachments for anchoring and for lifting. 045.3 Manual clamp for rope.
• Heat exchanger to cool the oil in the hydraulic circuit. 069.5 Printer with accessories, complete with case.
• Reelwinder fit for a 1900-mm-dia reel, with automatic 084 Bigger reelwinder fit for a 2250-mm-dia reel.
ropewinder. 115 Setting-up for pulling 2 ropes simultaneously.
014 Second reel-winder, ideal to complete the opt. 115.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 15 2214-0 • rev. 07:18 EN

 HYDRAULIC PULLER

F250.280
HYDRAULIC PULLERS

max pull 280 kN

Hydraulic puller fit to pull one rope in stringing operations of

overhead transmission lines. One hydraulic circuit allows to
continuously vary the speed in both directions by operating one
control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 960 mm Feeding diesel Max pull 280 kN
Capstan grooves 12 Power 448 hp / 330 kW Speed at max pull 2,3 km/h
Max rope diameter 38 mm 407 hp / 300 kW * 2,2 km/h *

Max joint diameter 80 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 5,40x2,50x3,15 m Electric plant 24 V Pull at max speed 127 kN

120 kN *
Weight (without rope) 13000 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of multi-grooved steel capstans fit for stringing one 005.1 Chassis with tandem axle, drawbar, suspensions, air braking
steel rope. system, tires and lights for towing on the road
• Machine control panel equipped with built-in electronic (homologation excluded).
instrument DEG 4.0 featuring a 7’’ large graphic colour display 008 Axle with leaf spring suspensions, drawbar, pneumatic
and a USB port. braking system, tires and lights for towing on the road
• Maintenance-free load cell reading system. (without homologation).
• Electronic instrument by-pass. 006.1 Lights for towing on the road.
• Device for pull force setting which allows to maintain the pre-set 006.2 Pneumatic braking system.
force even at speed “0”. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Safety negative hydraulic brake. low temperatures (up to -30°C).
• Chassis with rigid axle, manual brake and detachable drawbar for 037 Remote control by cable, with 10 m of cable.
towing at low speed in job-site. 038 Radio-control (max distance 100 m).
• Hydraulic back and front stabilisers. 045.2 Automatic clamp for rope.
• Attachments for anchoring and for lifting. 045.3 Manual clamp for rope.
• Heat exchanger to cool the oil in the hydraulic circuit. 069.5 Printer with accessories, complete with case.
• Reelwinder fit for a 1900-mm-dia reel, with automatic 084 Bigger reelwinder fit for a 2250-mm-dia reel.
ropewinder. 115 Setting-up for pulling 2 ropes simultaneously.
014 Second reel-winder, ideal to complete the opt. 115.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 16 2224-2 • rev. 09:18 EN

HYDRAULIC PULLER

F260.150.22

HYDRAULIC PULLERS
max pull 150 kN (2 x 75 kN)

Hydraulic puller fit to pull one or two ropes in stringing operations of

overhead transmission lines. Two hydraulic circuits allow to
continuously vary the speed in both directions by operating two
independent control devices. The two circuits may also be matched
and operated together by one control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 4 x Ø 600 mm Feeding diesel Max pull 1 X 150 kN
Max rope diameter 2 X 26 mm Power 285 hp / 210 kW or 2 x 75 kN

Max joint diameter 60 mm 305 hp / 225 kW * Speed at max pull 2,6 km/h
Cooling water 2,8 km/h *
Dimensions LxWxH 4,60x2,45x2,75 m
Electric plant 24 V Max speed 4,6 km/h
Weight (without rope) 8500 kg
Pull at max speed 1 x 85 kN
or 2 x 42,5 kN
1 x 95 kN *
or 2 x 47,5 kN *

CONFIGURATION OPTIONAL DEVICES

• Two pairs of multi-grooved steel capstans fit for stringing two 005.1 Chassis with tandem axle, drawbar, suspensions, air braking
steel ropes. system, tires and lights for towing on the road
• Machine control panel equipped with built-in electronic (homologation excluded).
instrument DEG 4.0 featuring a 7’’ large graphic colour display and 006.1 Lights for towing on the road.
a USB port. 006.2 Pneumatic braking system.
• Maintenance-free load cell reading system. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Electronic instrument by-pass. low temperatures (up to -30°C).
• Two devices for pull force setting which allows to maintain the 037 Remote control by cable, with 10 m of cable.
pre-set force even at speed “0”. 038 Radio-control (max distance 100 m).
• Two safety negative hydraulic brakes. 045.2 Automatic clamp for rope.
• Chassis with rigid axle, manual brake and detachable drawbar for 045.3 Manual clamp for rope.
towing at low speed in job-site. 069.5 Printer with accessories, complete with case.
• Hydraulic back and front stabilisers.
• Attachments for anchorage and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Devices for coupling the two pairs of capstans, fit to obtain the
max force of 15000 daN stringing one rope.
• Two reelwinders fit for 1400-mm-dia reels, with automatic
ropewinder.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 17 2320-0 • rev. 05:18 EN

 HYDRAULIC PULLER

F260.180.22
HYDRAULIC PULLERS

max pull 180 kN (2 x 90 kN)

Hydraulic puller fit to pull one or two ropes in stringing operations of

overhead transmission lines. Two hydraulic circuits allow to
continuously vary the speed in both directions by operating two
independent control devices. The two circuits may also be matched
and operated together by one control device.

FEATURES ENGINE PULL PERFORMANCES

Capstans 4 x Ø 600 mm Feeding diesel Max pull 1 X 180 kN
Max rope diameter 2 X 28 mm Power 285 hp / 210 kW or 2 x 90 kN

Max joint diameter 60 mm 305 hp / 225 kW * Speed at max pull 2,2 km/h
Cooling water 2,4 km/h *
Dimensions LxWxH 4,60x2,45x2,90 m
Electric plant 24 V Max speed 4,6 km/h
Weight (without rope) 8900 kg
Pull at max speed 1 x 90 kN
or 2 x 45 kN
1 x 100 kN *
or 2 x 50 kN *

CONFIGURATION OPTIONAL DEVICES

• Two pairs of multi-grooved steel capstans fit for stringing two 005.1 Chassis with tandem axle, drawbar, suspensions, air braking
steel ropes. system, tires and lights for towing on the road
• Machine control panel equipped with built-in electronic (homologation excluded).
instrument DEG 4.0 featuring a 7’’ large graphic colour display and 006.1 Lights for towing on the road.
a USB port. 006.2 Pneumatic braking system.
• Maintenance-free load cell reading system. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Electronic instrument by-pass. low temperatures (up to -30°C).
• Two devices for pull force setting which allows to maintain the 037 Remote control by cable, with 10 m of cable.
pre-set force even at speed “0”. 038 Radio-control (max distance 100 m).
• Two safety negative hydraulic brakes. 045.2 Automatic clamp for rope.
• Chassis with rigid axle, manual brake and detachable drawbar for 045.3 Manual clamp for rope.
towing at low speed in job-site. 069.5 Printer with accessories, complete with case.
• Hydraulic back and front stabilisers.
• Attachments for anchorage and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Devices for coupling the two pairs of capstans, fit to obtain the
max force of 18000 daN stringing one rope.
• Two reelwinders fit for 1400-mm-dia reels, with automatic
ropewinder.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 18 2325-0 • rev. 05:18 EN

 02
HYDRAULIC TENSIONERS

www.omac-italy.it 19
HYDRAULIC TENSIONER

F120.25
max tension 25 kN

Hydraulic tensioner fit to tension one conductor or fiber optic cable.

One hydraulic circuit allows to tension at constant force even varying

HYDRAULIC TENSIONERS
the speed of stringing.

FEATURES TENSION PERFORMANCES ELICORD - with opt.024.1

Capstans 2 x Ø 1500 mm Max tension force 25 kN Max diameter of elicord cable 80 mm
Capstan grooves 6 Min tension force 1kN
Max conductor diameter 36 mm Max speed 5 km/h
Dimensions LxWxH 3,85x1,80x2,25 m
Weight 2000 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon 010 Arrangement to use the machine as a puller (fed by a
sectors. separated hydraulic power unit).
• Machine control panel equipped with hydraulic dynamometer 024.1 Aluminium sectors with grooves, fit for tripolar cable
and mechanical metercounter. ELICORD 80-mm dia.
• Device to control low-force tensions (min. 1 kN), specially fit for 045.3 Manual clamp for conductor.
optical fibers.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers.
• Chassis with rigid axle, manual brake and detachable drawbar for
towing at low speed in job-site.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Grounding connection point.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 21 3140-2 • rev. 08:18 EN

 HYDRAULIC TENSIONER

F120.30
max tension 30 kN

Hydraulic tensioner fit to string one conductor or fiber optic cable.

One hydraulic circuit allows to tension at constant
HYDRAULIC TENSIONERS

force even varying the speed of stringing. Equipped with engine for
pull-back performances.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max tension force 30 kN
Capstan grooves 5 Power 35 hp / 26 kW Min tension force 1,5 kN
Max conductor diameter 1 x 36 mm 25,5 hp / 18,8 kW * Max speed 5 km/h
Dimensions LxWxH 3,85x1,85x2,20 m Cooling water

Weight 2500 kg Electric plant 12 V

PULL-BACK PERFORMANCES
Max pull 30 kN
Max speed 1,5 km/h
1,1 km/h *

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air brake, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.2 Pneumatic braking system.
instrument DEG 4.0 featuring a 7’’ large graphic colour display 024.1 Aluminium sectors with grooves, fit for tripolar cable
and a USB port. ELICORD 80-mm dia.
• Device to control low-force tensions (1,5-15 kN), specially fit for 037 Remote control by cable, with 10 m of cable.
optical fibers. 038 Radio-control (max distance 100 m).
• Maintenance-free load cell reading system. 045.2 Automatic clamp for conductor.
• Electronic instrument by-pass. 045.3 Manual clamp for conductor.
• Freewheeling disconnection (neutral) of capstans. 069.5 Printer for the electronic recorder, with accessories.
• Self-recovery device for sagging operations. 047.2 Hydraulic front plough.
• Safety negative hydraulic brake. 048 Hydraulic back stabilisers.
• Back fix conductor-driver with nylon rollers.
• Chassis with rigid axle, manual brake and detachable drawbar for
towing at low speed in job-site.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• One auxiliary hydraulic circuit for controlling 1 reel-stand.
• Grounding connection point.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 22 3150-1 • rev. 12:18 EN

HYDRAULIC TENSIONER

F120.40.2
max tension 40 kN

Hydraulic tensioner fit to string one or two conductors or optical fiber

cables. One hydraulic circuit allows to tension at constant force even

HYDRAULIC TENSIONERS
varying the speed of stringing. Equipped with engine for pull-back
performances.

FEATURES TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Capstans 2 x Ø 1500 mm Max tension force 40 kN Ø1200 mm CAPSTANS

Capstan grooves 8 Min tension force 1,5 kN

Max conductor diameter 2 x 36 mm Max speed 5 km/h
Dimensions LxWxH 3,85x2,00x2,20 m
Weight 2600 kg

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 010 Arrangement to use the machine as a puller (fed by a separated
• Machine control panel equipped with hydraulic dynamometer hydraulic power unit).
and mechanical metercounter. 045.3 Manual clamp for 2 conductors.
• Device to control low-force tensions (1,5-15 kN), specially fit for 047.2 Hydraulic front plough.
optical fibers. 048 Hydraulic back stabilisers.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Two back fix conductor-drivers with nylon rollers.
• Chassis with rigid axle, manual brake and detachable drawbar for
towing at low speed in job-site.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Grounding connection point.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 23 3190-0 • rev. 10:18 EN

 HYDRAULIC TENSIONER

F120.45.2
max tension 45 kN

Hydraulic tensioner fit to string one or two conductors or optical fiber

cables. One hydraulic circuit allows to tension at constant force even
HYDRAULIC TENSIONERS

varying the speed of stringing. Equipped with engine for pull-back

performances.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max tension force 45 kN
Capstan grooves 8 Power 35 hp / 26 kW Min tension force 2 kN
Max conductor diameter 2 x 36 mm 25,5 hp / 18,8 kW * Max speed 5 km/h
Dimensions LxWxH 3,95x2,00x2,20 m Cooling water

Weight 2700 kg Electric plant 12 V

PULL-BACK PERFORMANCES ALSO AVAILABLE VERSION WITH

Max pull 45 kN Ø1800 mm CAPSTANS

Max speed 0,8 km/h

0,6 km/h *

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air brake, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display (homologation excluded).
and a USB port. 037 Remote control by cable, with 10 m of cable.
• Maintenance-free load cell reading system. 038 Radio-control (max distance 100 m).
• Electronic instrument by-pass. 045.2 Automatic clamp for 2 conductors.
• Device to control low-force tensions (2-15 kN), specially fit for 045.3 Manual clamp for 2 conductors.
optical fibers. 069.5 Printer for the electronic recorder, with accessories.
• Self-recovery device for sagging operations. 047.2 Hydraulic front plough.
• Freewheeling disconnection (neutral) of capstans. 048 Hydraulic back stabilisers.
• Safety negative hydraulic brake.
• Two back fix conductor-drivers with nylon rollers.
• Chassis with rigid axle, manual brake and detachable drawbar for
towing at low speed in job-site.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Auxiliary hydraulic circuit for controlling 1 or 2 reel-stands
(not independent).
• Grounding connection point.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 24 3195-0 • rev. 08:18 EN

HYDRAULIC TENSIONER

F120.75.2
max tension 75 kN

Hydraulic tensioner fit to string one or two conductors or optical fiber

cables. One hydraulic circuit allows to tension at constant force even

HYDRAULIC TENSIONERS
varying the speed of stringing. Equipped with engine for pull-back
performances.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max tension force 75 kN
Capstan grooves 10 Power 57 hp / 42 kW Min tension force 2 kN
Max conductor diameter 2 x 42 mm 35 hp / 26 kW * Max speed 5 km/h
Dimensions LxWxH 3,95x2,10x2,20 m Cooling water

Weight 3500 kg Electric plant 12 V

PULL-BACK PERFORMANCES ALSO AVAILABLE VERSION WITH

Max pull 75 kN Ø1800 mm CAPSTANS

Max speed 1 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air brake, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display (homologation excluded).
and a USB port. 028.7 Device to start the diesel engine at low temperatures
• Maintenance-free load cell reading system. (up to -30°C).
• Electronic instrument by-pass. 037 Remote control by cable, with 10 m of cable.
• Device to control low-force tensions (2-25 kN), specially fit for 038 Radio-control (max distance 100 m).
fibre-optic cables. 045.2 Automatic clamp for 2 conductors.
• Freewheeling disconnection (neutral) of capstans. 045.3 Manual clamp for 2 conductors.
• Self-recovery device for sagging operations. 069.5 Printer for the electronic recorder, with accessories.
• Safety negative hydraulic brake. 174.2 Synchronising device for the connection of 2 machines
• Two back fix conductor-drivers with nylon rollers. complete with remote control by cable (20 m).
• Chassis with rigid axle, manual brake and detachable drawbar for 047.2 Hydraulic front plough.
towing at low speed in job-site. 048 Hydraulic back stabilisers.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Auxiliary hydraulic circuit for controlling 1 or 2 reel-stands
(not independent).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 25 3215-0 • rev. 09:18 EN

 HYDRAULIC TENSIONER

F120.90.2
max tension 90 kN

Hydraulic tensioner fit to string one or two conductors or optical fiber

cables. One hydraulic circuit allows to tension at constant force even
HYDRAULIC TENSIONERS

varying the speed of stringing. Equipped with engine for pull-back

performances.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max tension force 90 kN
Capstan grooves 10 Power 57 hp / 42 kW Min tension force 4 kN
Max conductor diameter 2 x 42 mm 57 hp / 42 kW * Max speed 5 km/h
Dimensions LxWxH 4,00x2,10x2,30 m Cooling water

Weight 4100 kg Electric plant 12 V

PULL-BACK PERFORMANCES ALSO AVAILABLE VERSION WITH

Max pull 90 kN Ø1800 mm CAPSTANS

Max speed 0,8 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air brake, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display and (homologation excluded).
a USB port. 028.7 Device to start the diesel engine at low temperatures
• Maintenance-free load cell reading system. (up to -30°C).
• Electronic instrument by-pass. 037 Remote control by cable, with 10 m of cable.
• Device to control low-force tensions (4-30 kN), specially fit for 038 Radio-control (max distance 100 m).
fibre-optic cables. 045.2 Automatic clamp for 2 conductors.
• Freewheeling disconnection (neutral) of capstans. 045.3 Manual clamp for 2 conductors.
• Self-recovery device for sagging operations. 069.5 Printer for the electronic recorder, with accessories.
• Safety negative hydraulic brake. 174.2 Synchronising device for the connection of 2 machines
• Two back fix conductor-drivers with nylon rollers. complete with remote control by cable (20 m).
• Chassis with rigid axle, manual brake and detachable drawbar for 047.2 Hydraulic front plough.
towing at low speed in job-site. 048 Hydraulic back stabilisers.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Auxiliary hydraulic circuit for controlling 1 or 2 reel-stands
(not independent).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 26 3225-0 • rev. 05:18 EN

HYDRAULIC TENSIONER

F120.100.22
max tension 100 kN (2 x 50 kN)

Hydraulic tensioner fit to string one or two conductors. Two hydraulic

circuits allow to tension at constant force even varying the speed of

HYDRAULIC TENSIONERS
stringing. The two circuits can be used independently or
simultaneously, with automatic forces partition. Equipped with engine
for pull-back performances. In pull-back mode, two hydraulic circuit
allow to continuously vary the speed in both directions, allowing to
use one of the hydraulic circuits or both of them matched.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 4 x Ø 1500 mm Feeding diesel Max tension force 1 x 100 kN
Capstan grooves 12 Power 57 hp / 42 kW or 2 x 50 kN

Max conductor diameter 2 x 42 mm 75 hp / 55,4 kW * Max speed 5 km/h

Dimensions LxWxH 4,50x2,25x2,80 m Cooling water

Weight 5500 kg Electric plant 12 V

PULL-BACK PERFORMANCES ALSO AVAILABLE VERSION WITH

Max pull 1 x 100 kN Ø1800 mm CAPSTANS
or 2 x 50 kN
Max speed 0,8 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of steel capstans lined with multi-grooved nylon sectors. 005.1 Chassis with 2 damped axles (tandem), air braking system
• Machine control panel equipped with built-in electronic and lights.
instrument DEG 4.0 featuring a 7’’ large graphic colour display and 008 Damped axle, air brake, drawbar and lights.
a USB port. 006.4 Arrangement of the chassis for circulation on road
• Maintenance-free load cell reading system. (homologation excluded).
• Electronic instrument by-pass. 012 Predisposition of one hydraulic circuit to feed a press for high
• Self-recovery device for sagging operations. pressure joints (max. 700 bar).
• Two safety negative hydraulic brakes. 017 Hydraulic/mechanical device (n.1, on 1 circuit) to control low
• Back fix conductor-drivers with nylon rollers. tension values (3-30 kN), fit to string fiber optics.
• Chassis with rigid axle, manual brake and detachable drawbar for 028.7 Device to start the diesel engine at low temperatures
towing at low speed in job-site. (up to -30°C).
• Hydraulic front plough and back stabilisers. 037 Remote control by cable, with 10 m of cable.
• Attachments for anchoring and for lifting. 038 Radio-control (max distance 100 m).
• Heat exchanger to cool the oil in the hydraulic circuit. 045.2 Automatic clamp for 2 conductors.
• Device for coupling the two pairs of capstans. 045.3 Manual clamp for 2 conductors.
• Two auxiliary hydraulic circuits for controlling 1 or 2 reel-stands 069.5 Printer for the electronic recorder, with accessories.
independently. 174.2 Synchronising device for the connection of 2 machines
• Grounding connection point. complete with remote control by cable (20 m).

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 27 3327-0 • rev. 12:18 EN

 HYDRAULIC TENSIONER

F110.140.22
max tension 140 kN (2 x 70 kN)

Hydraulic tensioner fit to string one or two conductors. Two hydraulic

circuits allow to tension at constant force even varying the speed of
HYDRAULIC TENSIONERS

stringing. The two circuits can be used independently or

simultaneously, with automatic forces partition. Equipped with engine
for pull-back performances. In pull-back mode, two hydraulic circuit
allow to continuously vary the speed in both directions, allowing to
use one of the hydraulic circuits or both of them matched.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 4 x Ø 1800 mm Feeding diesel Max tension force 1 x 140 kN
Capstan grooves 12 Power 86 hp / 63 kW or 2 x 70 kN

Max conductor diameter 2 x 46 mm 75 hp / 55,4 kW * Max speed 5 km/h

Dimensions LxWxH 4,50x2,25x2,80 m Cooling water

Weight 7700 kg Electric plant 12 V

PULL-BACK PERFORMANCES
Max pull 1 x 140 kN
or 2 x 70 kN
Max speed 0,9 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of steel capstans lined with multi-grooved nylon 005.1 Chassis with 2 damped axles (tandem), air braking system
sectors. and lights.
• Machine control panel equipped with built-in electronic 008 Damped axle, air brake, drawbar and lights.
instrument DEG 4.0 featuring a 7’’ large graphic colour display 006.4 Arrangement of the chassis for circulation on road
and a USB port. (homologation excluded).
• Maintenance-free load cell reading system. 012 Predisposition of one hydraulic circuit to feed a press for high
• Electronic instrument by-pass. pressure joints (max. 700 bar).
• Self-recovery device for sagging operations. 017 Hydraulic/mechanical device (n.1, on 1 circuit) to control low
• Two safety negative hydraulic brakes. tension values (4-40 kN), fit to string fiber optics.
• Back fix conductor-drivers with nylon rollers. 028.7 Device to start the diesel engine at low temperatures
• Chassis with rigid axle, manual brake and detachable drawbar for (up to -30°C).
towing at low speed in job-site. 037 Remote control by cable, with 10 m of cable.
• Hydraulic front plough and back stabilisers. 038 Radio-control (max distance 100 m).
• Attachments for anchoring and for lifting. 045.2 Automatic clamp for 2 conductors.
• Heat exchanger to cool the oil in the hydraulic circuit. 045.3 Manual clamp for 2 conductors.
• Devices for coupling the two pairs of capstans. 069.5 Printer for the electronic recorder, with accessories.
• Two auxiliary hydraulic circuits for controlling 1 or 2 reel-stands 174.2 Synchronising device for the connection of 2 machines
independently. complete with remote control by cable (20 m).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 28 3340-0 • rev. 09:18 EN

HYDRAULIC TENSIONER

F120.150.4
max tension 150 kN

Hydraulic tensioner fit to string 1, 2, 3 or 4 (up to 6 on demand)

conductors. One hydraulic circuit allows to tension at constant force

HYDRAULIC TENSIONERS
even varying the speed of stringing. Equipped with engine for
pull-back performances.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max tension force 150 kN
Capstan grooves 16 Power 86 hp / 63 kW Max speed 5 km/h
Max conductor diameter 4 x 42 mm 75 hp / 55,4 kW *

Dimensions LxWxH 4,50x2,30x2,80 m Cooling water

Weight 7800 kg Electric plant 24 V

PULL-BACK PERFORMANCES
Max pull 150 kN
Max speed 1 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 005.1 Chassis with 2 damped axles (tandem), air braking system
• Machine control panel equipped with built-in electronic and lights.
instrument DEG 4.0 featuring a 7’’ large graphic colour display 008 Damped axle, air brake, drawbar and lights.
and a USB port. 006.4 Arrangement of the chassis for circulation on road
• Maintenance-free load cell reading system. (homologation excluded).
• Electronic instrument by-pass. 012 Predisposition of one hydraulic circuit to feed a press for high
• Self-recovery device for sagging operations. pressure joints (max. 700 bar).
• Safety negative hydraulic brakes. 017 Device to control low-force tension values, specially fit for
• Back fix conductor-driven with nylon rollers for 4 conductors. fibre-optic cables.
• Chassis with rigid axle, manual brake and detachable drawbar for 020.3 Set of nylon sectors with grooves fit for 6 conductors Ømax 31,5
towing at low speed in job-site. mm (instead of standard set), and 2 additional hydraulic circuits
• Hydraulic front plough and back stabilisers. to control 2 extra reel-stands (total 6).
• Attachments for anchoring and for lifting. 028.7 Device to start the diesel engine at low temperatures
• Heat exchanger to cool the oil in the hydraulic circuit. (up to -30°C).
• Two auxiliary hydraulic circuits for controlling up to 4 reel-stands 037 Remote control by cable, with 10 m of cable.
(not independent). 038 Radio-control (max distance 100 m).
• Grounding connection point. 045.2 Automatic clamp for conductors.
045.3 Manual clamp for conductors.
069.5 Printer for the electronic recorder, with accessories.
174.2 Synchronising device for the connection of 2 machines
complete with remote control by cable (20 m).
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 29 3265-0 • rev. 12:18 EN

 HYDRAULIC TENSIONER

F120.150.42
max tension 150 kN (2 x 75 kN)

Hydraulic tensioner fit to string 1, 2, 3 or 4 conductors. Two hydraulic

circuits allow to tension at constant force even varying the speed of
HYDRAULIC TENSIONERS

stringing. The two circuits can be used independently or

simultaneously, with automatic forces partition. Equipped with engine
for pull-back performances. In pull-back mode, two hydraulic circuit
allow to vary the speed in both directions, allowing to use one of the
hydraulic circuits or both them matched.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 4 x Ø 1500 mm Feeding diesel Max tension force 150 kN = 2 x 75 kN
Max conductor diameter 4 x 42 mm Power 86 hp / 63 kW Max tension per
Dimensions LxWxH 5,10x2,45x3,00 m 75 hp / 55,4 kW * conductor 37,5 kN

Weight 8200 kg Cooling water Max speed 5 km/h

Electric plant 12 V

PULL-BACK PERFORMANCES ALSO AVAILABLE VERSION WITH

Max pull 150 kN = 2 x 75 kN Ø1800 mm CAPSTANS

Max speed 1 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of steel capstans lined with multi-grooved nylon 005.1 Chassis with 2 damped axles (tandem), air braking system
sectors. and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display (homologation excluded).
and a USB port. 012 Predisposition of one hydraulic circuit to feed a press for high
• Maintenance-free load cell reading system. pressure joints (max. 700 bar).
• Electronic instrument by-pass. 017 Hydraulic/mechanical device (n.1, on 1 circuit) to control low
• Self-recovery device for sagging operations. tension values, fit to string fiber optics.
• Two safety negative hydraulic brakes. 020.3 Set of nylon sectors with grooves fit for 6 conductors Ømax 31,5
• Front and back conductor-drivers with nylon rollers, for 4 cond. mm (instead of standard set), and 2 additional hydraulic circuits
• Chassis with two rigid axles (tandem), tires and drawbar for to control 2 extra reel-stands (total 6).
towing at low speed in job-site. 028.7 Device to start the diesel engine at low temperatures
• Hydraulic front plough. (up to -30°C).
• Attachments for anchoring and for lifting. 037 Remote control by cable, with 10 m of cable.
• Heat exchanger to cool the oil in the hydraulic circuit. 038 Radio-control (max distance 100 m).
• Devices for coupling the two pairs of capstans. 045.2 Automatic clamp for 4 conductors.
• Two auxiliary hydraulic circuits for controlling up to 4 reel-stands 045.3 Manual clamp for 4 conductors.
(not independent). 069.5 Printer for the electronic recorder, with accessories.
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 30 3512-0 • rev. 09:18 EN

HYDRAULIC TENSIONER

F110.280.62
max tension 280 kN (2 x 140 kN)

Hydraulic tensioner fit to string 1, 2, 3 or 4 (up to 6 on demand)

conductors. Two hydraulic circuits allow to tension at constant force

HYDRAULIC TENSIONERS
even varying the speed of stringing. The two circuits can be used
independently or simultaneously, with with automatic forces
partition. Equipped with engine for pull-back performances. In
pull-back mode, two hydraulic circuit allow to vary the speed in both
directions, allowing to use one of the hydraulic circuits or both of
them matched.

FEATURES ENGINE TENSION PERFORMANCES

Capstans 4 x Ø 1800 mm Feeding diesel Max tension force 280 kN = 2 x 140 kN
Max conductor diameter 4 x 51 mm Power 176 hp / 130 kW Max speed 5 km/h
Dimensions LxWxH 5,40x2,45x3,00 m 176 hp / 130 kW *

Weight 14500 kg Cooling water

Electric plant 24 V

PULL-BACK PERFORMANCES
Max pull 280 kN = 2 x 140 kN
Max speed 1 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of steel capstans lined with multi-grooved nylon 005.1 Chassis with 2 damped axles (tandem), air braking system
sectors, fit for 4 conductors totally. and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display (homologation excluded).
and a USB port. 012 Predisposition of one hydraulic circuit to feed a press for high
• Maintenance-free load cell reading system. pressure joints (max. 700 bar).
• Electronic instrument by-pass. 020.3 Set of nylon sectors with grooves fit for 6 conductors Ømax 31,5
• Self-recovery device for sagging operations. mm (instead of standard set).
• Two safety negative hydraulic brakes. 028.7 Device to start the diesel engine at low temperatures
• Front and back conductor-drivers with nylon rollers, for 4 cond. (up to -30°C).
• Chassis with two rigid axles (tandem), tires and drawbar for 037 Remote control by cable, with 10 m of cable.
towing at low speed in job-site. 038 Radio-control (max distance 100 m).
• Hydraulic front plough. 045.2 Automatic clamp for 6 conductors.
• Attachments for anchoring and for lifting. 069.5 Printer for the electronic recorder, with accessories.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Devices for coupling the two of pairs of capstans.
• Three auxiliary hydraulic circuits for controlling up to 6
reel-stands (not independent).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 31 3548-0 • rev. 05:18 EN

 03
HYDRAULIC
PULLER-TENSIONERS

www.omac-italy.it 33
HYDRAULIC PULLER-TENSIONER

F120.AF.30
max pull-tension 30 kN

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string one rope or conductor. One hydraulic circuit allows
to tension at constant force even varying the speed of stringing.
In puller mode, one hydraulic circuit allows to continuously vary the
speed in both directions.

PULLER-TENSIONERS
FEATURES ENGINE PULL PERFORMANCES
Capstans 2 x Ø 1500 mm Feeding diesel Max pull 30 kN
Capstan grooves 5 Power 49 hp / 36 kW Speed at max pull 2,5 km/h
Max conductor diameter 36 mm 57 hp / 42 kW * 2,8 km/h *

Max rope diameter 16 mm Cooling water Max speed 4,5 km/h

Dimensions LxWxH 3,85x1,85x2,20 m Electric plant 12 V Pull at max speed 15 kN

16 kN *
Weight 2700 kg

TENSION PERFORMANCES
Max tension force 30 kN
Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air braking system, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display and (homologation excluded).
a USB port. 014 Reel-winder arm fit for a 1400-mm-dia. reel.
• Maintenance-free load cell reading system. 037 Remote control by cable, with 10 m of cable.
• Electronic instrument by-pass. 038 Radio-control (max distance 100 m).
• Self-recovery device for sagging operations. 045.2 Automatic clamp for rope/conductor.
• Freewheeling disconnection (neutral) of capstans. 045.3 Manual clamp for rope/conductor.
• Safety negative hydraulic brake. 069.5 Printer for the electronic recorder, with accessories.
• Back fix conductor-driver with nylon rollers. 047.2 Hydraulic front plough.
• Chassis with rigid axle, manual brake and detachable drawbar for 048 Hydraulic back stabilisers.
towing at low speed in job-site.
• Mechanical front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Oil cooling system.
• Auxiliary hydraulic circuit for additional equipment (one
reel-stand or reel-winder).
• Grounding connection point

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 35 5140-0 • rev. 10:19 EN

 HYDRAULIC PULLER-TENSIONER

F120.AF.45.2
max pull-tension 45 kN

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string one or two ropes or conductors.
One hydraulic circuit allows to tension at constant force even varying
the speed of stringing. In puller mode, one hydraulic circuit allows to
continuously vary the speed in both directions.
PULLER-TENSIONERS

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max pull 45 kN
Capstan grooves 8 Power 86 hp / 63 kW Speed at max pull 2,7 km/h
Max conductor diameter 2 x 36 mm 75 hp / 55,4 kW * 2,3 km/h *

Max rope diameter 16 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 3,95x2,00x2,20 m Electric plant 12 V Pull at max speed 26 kN

22 kN *
Weight 3600 kg

TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Max tension force 45 kN Ø1200 Ø1800 mm CAPSTANS

Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air braking system, drawbar and lights.
• Machine control panel equipped with built-in electronic 012 Hydraulic circuit to feed a press for high pressure joints
instrument DEG 4.0 featuring a 7’’ large graphic colour display and (max. 700 bar).
a USB port. 006.4 Arrangement of the chassis for circulation on road
• Maintenance-free load cell reading system. (homologation excluded).
• Electronic instrument by-pass. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Self-recovery device for sagging operations. low temperatures (up to -30°C).
• In puller mode, device for pull-force setting, which allows to 037 Remote control by cable, with 10 m of cable.
maintain the pre-set force even at speed “0”. 038 Radio-control (max distance 100 m).
• Device to control low-force tensions (2-15 kN), fit for OPGW. 045.2 Automatic clamp for 2 ropes/conductors.
• Freewheeling disconnection (neutral) of capstans. 045.3 Manual clamp for 2 ropes/conductors.
• Safety negative hydraulic brake. 069.5 Printer for the electronic recorder, with accessories.
• Back fix conductor-driver with nylon rollers for 2 cond. 119 Capstans with steel grooves chemically treated.
• Chassis with rigid axle, manual brake and detachable drawbar for
towing at low speed in job-site.
• Hydraulic front plough and back stabilisers.
• Attachments for anchoring and for lifting.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2
reel-winders or reel-stands).
• Grounding connection point.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 36 5180-1 • rev. 12:18 EN

HYDRAULIC PULLER-TENSIONER

F120.AF.75.2
max pull-tension 75 kN

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string one or two ropes or conductors.
One hydraulic circuit allows to tension at constant force even varying
the speed of stringing. In puller mode, one hydraulic circuit allows to
continuously vary the speed in both directions.

PULLER-TENSIONERS
FEATURES ENGINE PULL PERFORMANCES
Capstans 2 x Ø 1500 mm Feeding diesel Max pull 75 kN
Capstan grooves 10 Power 100 hp / 75 kW Speed at max pull 2 km/h
Max conductor diameter 2 x 42 mm 100 hp / 75 kW * 2 km/h *

Max rope diameter 18 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 3,95x2,10x2,20 m Electric plant 12 V Pull at max speed 35 kN

35 kN *
Weight 4800 kg

TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Max tension force 75 kN Ø1200 Ø1800 mm CAPSTANS

Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air braking system, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display and (homologation excluded).
a USB port. 012 Hydraulic circuit to feed a press for high pressure joints (max.
• Maintenance-free load cell reading system. 700 bar).
• Electronic instrument by-pass. 014 Reel-winder arm fit for a 1600-mm-dia. reel.
• Self-recovery device for sagging operations. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Device to control low-force tensions (2-25 kN), fit for OPGW. low temperatures (up to -30°C).
• In puller mode, device for pull-force setting, which allows to 037 Remote control by cable, with 10 m of cable.
maintain the pre-set force even at speed “0”. 038 Radio-control (max distance 100 m).
• Freewheeling disconnection (neutral) of capstans. 045.2 Automatic clamp for 2 ropes/conductors.
• Safety negative hydraulic brake. 045.3 Manual clamp for 2 ropes/conductors.
• Back fix conductor-driver with nylon rollers for 2 cond. 069.5 Printer for the electronic recorder, with accessories.
• Chassis with rigid axle, manual brake and detachable drawbar for 119 Capstans with steel grooves chemically treated.
towing at low speed in job-site. 174.2 Synchronising device for the connection of 2 machines,
• Hydraulic front plough and back stabilisers. complete with remote control by cable (20 m).
• Attachments for anchoring and for lifting.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2
reel-winders or reel-stands).
• Grounding connection point.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 37 5192-0 • rev. 09:18 EN

 HYDRAULIC PULLER-TENSIONER

F120.AF.90.2
max pull-tension 90 kN

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string one or two ropes or conductors.
One hydraulic circuit allows to tension at constant force even varying
the speed of stringing. In puller mode, one hydraulic circuit allows to
continuously vary the speed in both directions.
PULLER-TENSIONERS

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max pull 90 kN
Capstan grooves 10 Power 142 hp / 105 kW Speed at max pull 2,4 km/h
Max conductor diameter 2 x 42 mm 142 hp / 105 kW * 2,4 km/h *

Max rope diameter 18 mm Cooling water Max speed 5 km/h

Dimensions LxWxH 4,00x2,25x2,30 m Electric plant 12 V Pull at max speed 45 kN

45 kN *
Weight 5000 kg

TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Max tension force 90 kN Ø1800 mm CAPSTANS

Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 008 Damped axle, air braking system, drawbar and lights.
• Machine control panel equipped with built-in electronic 006.4 Arrangement of the chassis for circulation on road
instrument DEG 4.0 featuring a 7’’ large graphic colour display and (homologation excluded).
a USB port. 012 Hydraulic circuit to feed a press for high pressure joints (max.
• Maintenance-free load cell reading system. 700 bar).
• Electronic instrument by-pass. 014 Reel-winder arm fit for a 1600-mm-dia. reel.
• Self-recovery device for sagging operations. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Device to control low-force tensions (4-30 kN), fit for OPGW. low temperatures (up to -30°C).
• In puller mode, device for pull-force setting, which allows to 037 Remote control by cable, with 10 m of cable.
maintain the pre-set force even at speed “0”. 038 Radio-control (max distance 100 m).
• Freewheeling disconnection (neutral) of capstans. 045.2 Automatic clamp for 2 ropes/conductors.
• Safety negative hydraulic brake. 045.3 Manual clamp for 2 ropes/conductors.
• Back fix conductor-driver with nylon rollers for 2 cond. 069.5 Printer for the electronic recorder, with accessories.
• Chassis with rigid axle, manual brake and detachable drawbar for 119 Capstans with steel grooves chemically treated.
towing at low speed in job-site. 174.2 Synchronising device for the connection of 2 machines,
• Hydraulic front plough and back stabilisers. complete with remote control by cable (20 m).
• Attachments for anchoring and for lifting.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2
reel-winders or reel-stands).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 38 5200-0 • rev. 19:18 EN

HYDRAULIC PULLER-TENSIONER

F120.AF.90.22
max pull-tension 90 kN (2 x 45 kN)

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string one or two ropes or conductors.
Two hydraulic circuits allow to tension at constant force even varying
the speed of stringing. The two circuits can be used independently
or simultaneously, with automatic forces partition. In puller mode, 2
closed hydraulic circuits allow to vary the speed in both directions,
allowing to use one of the hydraulic circuits or both of them matched.

PULLER-TENSIONERS
FEATURES ENGINE PULL PERFORMANCES
Capstans 4 x Ø 1500 mm Feeding diesel Max pull 1 x 90 kN
Max conductor diameter 2 x 42 mm Power 142 hp / 105 kW or 2 x 45 kN

Max rope diameter 18 mm 142 hp / 105 kW * Speed at max pull 2,4 km/h
Cooling water 2,5 km/h *
Dimensions LxWxH 4,50x2,25x2,80 m
Electric plant 12 V Max speed 5 km/h
Weight 6200 kg
Pull at max speed 45 kN

TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Max tension force 1 x 90 kN Ø1800 mm CAPSTANS
or 2 x 45 kN
Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of steel capstans lined with multi-grooved nylon sectors. 005.1 Chassis with 2 damped axles (tandem), air braking system
• Machine control panel equipped with built-in electronic and lights.
instrument DEG 4.0 featuring a 7’’ large graphic colour display and 008 Damped axle, air braking system, drawbar and lights.
a USB port. 006.4 Arrangement of the chassis for circulation on road
• Maintenance-free load cell reading system. (homologation excluded).
• Electronic instrument by-pass. 012 Hydraulic circuit to feed a press for high pressure joints (max.
• Self-recovery device for sagging operations. 700 bar).
• In puller mode, device for pull-force setting, which allows to 017 Hydraulic/mechanical device (n.1, on 1 circuit) to control low
maintain the pre-set force even at speed “0”. tension values (2-15 kN), fit to string fiber optics.
• Freewheeling disconnection (neutral) of capstans. 014 Reel-winder arm fit for a 1600-mm-dia. reel (1 or 2).
• Two safety negative hydraulic brakes. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Back fix conductor-driver with nylon rollers for 2 cond. low temperatures (up to -30°C).
• Chassis with rigid axle, manual brake and detachable drawbar for 037 Remote control by cable, with 10 m of cable.
towing at low speed in job-site. 038 Radio-control (max distance 100 m).
• Hydraulic front plough and back stabilisers. 045.2 Automatic clamp for 2 ropes/conductors.
• Attachments for anchoring and for lifting. 045.3 Manual clamp for 2 ropes/conductors.
• Oil cooling system. 069.5 Printer for the electronic recorder, with accessories.
• Devices for coupling the two pairs of capstans. 119 Capstans with steel grooves chemically treated.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 174.2 Synchronising device for the connection of 2 machines,
reel-winders or reel-stands). complete with remote control by cable (20 m).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 39 5338-0 • rev. 09:18 EN

 HYDRAULIC PULLER-TENSIONER

F120.AF.140.4
max pull-tension 140 kN

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string 1, 2, 3 or 4 ropes or conductors.
One hydraulic circuit allows to tension at constant force even varying
the speed of stringing. In puller mode, one hydraulic circuit allows to
continuously vary the speed in both directions.
PULLER-TENSIONERS

FEATURES ENGINE PULL PERFORMANCES

Capstans 2 x Ø 1500 mm Feeding diesel Max pull 140 kN
Capstan grooves 16 Power 176 hp / 130 kW Speed at max pull 1,8 km/h
Max conductor diameter 4 x 42 mm 176 hp / 130 kW * 1,8 km/h *

Max rope diameter 24 mm Cooling water Max speed 4 km/h

Dimensions LxWxH 4,50x2,30x2,80 m Electric plant 12 V Pull at max speed 55 kN

55 kN *
Weight 8500 kg

TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Max tension force 140 kN Ø1800 mm CAPSTANS

Max speed 4,5 km/h

CONFIGURATION OPTIONAL DEVICES

• One pair of steel capstans lined with multi-grooved nylon sectors. 005.1 Chassis with 2 damped axles (tandem), air braking system
• Machine control panel equipped with built-in electronic and lights.
instrument DEG 4.0 featuring a 7’’ large graphic colour display and 008 Damped axle, air braking system, drawbar and lights.
a USB port. 006.4 Arrangement of the chassis for circulation on road
• Maintenance-free load cell reading system. (homologation excluded).
• Electronic instrument by-pass. 014 Reel-winder arm fit for a 1600-mm-dia. reel (1 or 2).
• Self-recovery device for sagging operations. 028.7 Device to start the diesel engine and the hydraulic circuit at
• In puller mode, device for pull-force setting, which allows to low temperatures (up to -30°C).
maintain the pre-set force even at speed “0”. 037 Remote control by cable, with 10 m of cable.
• Safety negative hydraulic brake. 038 Radio-control (max distance 100 m).
• Back fix conductor-drivers with nylon rollers for 4 cond. 045.2 Automatic clamp for 4 ropes/conductors.
• Chassis with rigid axle, manual brake and detachable drawbar for 045.3 Manual clamp for 4 ropes/conductors.
towing at low speed in job-site. 069.5 Printer for the electronic recorder, with accessories.
• Hydraulic front plough and back stabilisers. 119 Capstans with steel grooves chemically treated.
• Attachments for anchoring and for lifting. 174.2 Synchronising device for the connection of 2 machines,
• Oil cooling system. complete with remote control by cable (20 m).
• Four auxiliary hydraulic circuits for additional equipment 020.3 Set of nylon sectors with grooves fit for 6 conductors
(4 reel-winders or 4 reel-stands). Ømax 31,5 mm (instead of standard set), and 2 additional
• Grounding connection point. hydraulic circuits to control 2 extra reel-stands (total 6).

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 40 5280-0 • rev. 09:18 EN

HYDRAULIC PULLER-TENSIONER

F110.AF.140.22
max pull-tension 140 kN (2 x 70 kN)

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string one or two ropes or conductors.
Two hydraulic circuits let to tension at constant force even varying
the speed of stringing. The two circuits can be used independently or
simultaneously, with automatic forces partition. In puller mode, 2
closed hydraulic circuits allow to vary the speed in both directions,
allowing to use one of the hydraulic circuits or both of them matched.

PULLER-TENSIONERS
FEATURES ENGINE PULL PERFORMANCES
Capstans 4 x Ø 1800 mm Feeding diesel Max pull 1 x 140 kN
Capstan grooves 12 Power 176 hp / 130 kW or 2 x 70 kN

Max conductor diameter 2 x 46 mm 176 hp / 130 kW * Speed at max pull 1,9 km/h
Cooling water 1,9 km/h *
Max rope diameter 28 mm
Electric plant 24 V Max speed 4,5 km/h
Dimensions LxWxH 4,60x2,50x3,00 m
4,5 km/h *
Weight 9500 kg
Pull at max speed 70 kN

TENSION PERFORMANCES
Max tension force 1 x 140 kN
or 2 x 70 kN
Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of steel capstans lined with multi-grooved nylon sectors. 005.1 Chassis with 2 damped axles (tandem), air braking system
• Machine control panel equipped with 2 built-in electronic and lights.
instrument DEG 4.0 featuring a 7’’ large graphic colour display and 008 Damped axle, air braking system, drawbar and lights.
a USB port. 006.4 Arrangement of the chassis for circulation on road
• Maintenance-free load cell reading system. (homologation excluded).
• Electronic instrument by-pass. 012 Hydraulic circuit to feed a press for high pressure joints (max.
• Self-recovery device for sagging operations. 700 bar).
• In puller mode, device for pull-force setting, which allows to 014 Reel-winder arm fit for a 1600-mm-dia. reel (1 or 2).
maintain the pre-set force even at speed “0”. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Freewheeling disconnection (neutral) of capstans. low temperatures (up to -30°C).
• Two safety negative hydraulic brakes. 037 Remote control by cable, with 10 m of cable.
• Back fix conductor-driver with nylon rollers for 2 cond. 038 Radio-control (max distance 100 m).
• Chassis with rigid axle, manual brake and detachable drawbar for 045.2 Automatic clamp for 2 ropes/conductors.
towing at low speed in job-site. 045.3 Manual clamp for 2 ropes/conductors.
• Hydraulic front plough and back stabilisers. 069.5 Printer for the electronic recorder, with accessories.
• Attachments for anchoring and for lifting. 119 Capstans with steel grooves chemically treated.
• Oil cooling system. 174.2 Synchronising device for the connection of 2 machines,
• Devices for coupling the two pairs of the capstans. complete with remote control by cable (20 m).
• Two auxiliary hydraulic circuits for additional equipment (1 or 2
reel-winders or reel-stands).
• Grounding connection point.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 41 5348-0 • rev. 08:18 EN

 HYDRAULIC PULLER-TENSIONER

F120.AF.180.42
max pull-tension 180 kN (2 x 90 kN)

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string 1, 2, 3 or 4 ropes or conductors.
Two hydraulic circuits allow to tension at constant force even varying
the speed of stringing. The two circuits can be used independently
or simultaneously, with automatic forces partition. In puller mode, 2
closed hydraulic circuits allow to vary the speed in both directions,
allowing to use one of the hydraulic circuits or both of them matched.
PULLER-TENSIONERS

FEATURES ENGINE PULL PERFORMANCES

Capstans 4 x Ø 1500 mm Feeding diesel Max pull 1 x 180 kN
Max conductor diameter 4 x 45 mm Power 285 hp / 210 kW or 2 x 90 kN

Max rope diameter 30 mm 305 hp / 225 kW * Speed at max pull 2,1 km/h
Cooling water 2,1 km/h *
Dimensions LxWxH 6,00x2,50x3,15 m
Electric plant 24 V Max speed 5 km/h
Weight 13200 kg
5 km/h *

TENSION PERFORMANCES
Max tension force 1 x 180 kN
or 2 x 90 kN
Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• Two pairs of capstans with steel grooves thermally and chemically 006.4 Arrangement of the chassis for circulation on road
treated, high resistance, fit for steel wire ropes or conductors. (homologation excluded).
• Machine control panel equipped with 2 built-in electronic 012 Hydraulic circuit to feed a press for high pressure joints (max.
instruments DEG 4.0 featuring a 7’’ large graphic colour display and 700 bar).
a USB port. 014 Reel-winder arm fit for a 1600-mm-dia. reel (1 or 2).
• Maintenance-free load cell reading system. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Electronic instrument by-pass. low temperatures (up to -30°C).
• Self-recovery device for sagging operations. 037 Remote control by cable, with 10 m of cable.
• In puller mode, device for pull-force setting, which allows to 038 Radio-control (max distance 100 m).
maintain the pre-set force even at speed “0”. 045.2 Automatic clamp for 4 ropes/conductors.
• Two safety negative hydraulic brakes. 045.3 Manual clamp for 4 ropes/conductors.
• Back conductor-drivers with nylon rollers for 4 cond. 069.5 Printer for the electronic recorder, with accessories.
• Frame with two axles, steering-one with drawbar, leaf spring
suspensions and tires, fit for towing at low speed in job-site.
• Hydraulic front plough.
• Attachments for anchoring and for lifting.
• Oil cooling system.
• Four auxiliary hydraulic circuits for additional equipment
(4 reel-winders or 4 reel-stands).
• Grounding connection point.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 42 5365-0 • rev. 09:18 EN

 HYDRAULIC PULLER-TENSIONER

F120.AF.180.44
max pull-tension 180 kN (2 x 90 or 4 x 45 kN)

Hydraulic machine designed to operate both as a tensioner and as

puller, fit to string 1, 2, 3 or 4 ropes or conductors.
Four hydraulic circuits allow to tension at constant force even varying
the speed of stringing. The four circuits can be used independently or
simultaneously, with automatic forces partition. In puller mode, four
closed hydraulic circuits allow to vary the speed in both directions,
allowing to use one of the hydraulic circuits or all of them matched.

PULLER-TENSIONERS
FEATURES ENGINE PULL PERFORMANCES
Capstans 8 x Ø 1500 mm Feeding diesel Max pull 1 x 180 kN
Max conductor diameter 4 x 45 mm Power 285 hp / 210 kW or 2 x 90 kN
305 hp / 225 kW * or 4 x 45 kN
Max rope diameter 30 mm
Cooling water Speed at max pull 2,1 km/h
Dimensions LxWxH 6,40x2,50x3,25 m
2,1 km/h *
Weight 15000 kg Electric plant 24 V
Max speed 5 km/h
5 km/h *

TENSION PERFORMANCES ALSO AVAILABLE VERSION WITH

Max tension force 1 x 180 kN Ø1800 mm CAPSTANS
or 2 x 90 kN
or 4 x 45 kN
Max speed 5 km/h

CONFIGURATION OPTIONAL DEVICES

• Four pairs of capstans with high resistance steel grooves thermally 006.4 Arrangement of the chassis for circulation on road
and chemically treated, fit for steel wire ropes or conductors. (homologation excluded).
• Machine control panel equipped with 4 built-in electronic 012 Hydraulic circuit to feed a press for high pressure joints (max.
instruments DEG 4.0 featuring a 7’’ large graphic colour display and 700 bar).
a USB port. 028.7 Device to start the diesel engine and the hydraulic circuit at
• Maintenance-free load cell reading system. low temperatures (up to -30°C).
• Electronic instrument by-pass. 037 Remote control by cable, with 10 m of cable.
• Self-recovery device for sagging operations. 038 Radio-control (max distance 100 m).
• In puller mode, device for pull-force setting, which allows to 045.2 Automatic clamp for 4 ropes/conductors.
maintain the pre-set force even at speed “0”. 045.3 Manual clamp for 4 ropes/conductors.
• Four safety negative hydraulic brakes. 069.5 Printer for the electronic recorder, with accessories.
• Back and front conductor-drivers with nylon rollers for 4 cond. to
position the reel-stands in front or rear of the machine.
• Frame with two axles, steering-one with drawbar, leaf spring
suspensions and tires, fit for towing at low speed in job-site.
• Hydraulic front plough.
• Attachments for anchoring and for lifting.
• Oil cooling system.
• Four auxiliary hydraulic circuits for additional equipment
(4 reel-winders or 4 reel-stands).
• Grounding connection point.
* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 43 5758-0 • rev. 19:18 EN

 REMOTE CONTROLS

CABLE REMOTE CONTROL

037
Remote control by cable. Fit for “puller” and “puller-tensioner” machines with 1, 2, 3 or
4 hydraulic circuits.
The control is complete with:
• Minijoystick for controlling the rotation of the capstans
• Speed adjustment control
• Emergency stop button
• 10-m of the connection cable
OPTIONAL DEVICES
PULLER-TENSIONERS

01 Dynamometer to read the pulling force, metercounter and speedometer.

02 Engine start/stop.
03 Engine accelerator.
04 Tension force adjustment control (tensioner).

RADIO REMOTE CONTROL

038.1
Radio remote control fit for “puller” machines.
Max operational distance: up to 100 m.
The radio-control is complete with:
• Two buttons for controlling the capstans rotation
• Speed-adjustment control
• Emergency stop button
• Back-up cable for connect radio control to the machine in case of radio-failure
• Dynamometer to read the pulling force, metercounter and speedometer.
(Only for the following machine models: F275.30 and F280.35)

038
Radio remote control. Fit for “puller” and “puller-tensioner” machines with 1,2,3 or 4
hydraulic circuits.
Max operational distance: up to 100 m.
The radio-control is complete with:
• Minijoystick for controlling the capstans rotation
• Speed adjustment control (puller)
(1 circuit) • Emergency stop button
• Back-up cable to connect the radio remote control to the machine in case of
radio-failure
OPTIONAL DEVICES
01 Dynamometer to read the pulling force, metercounter and speedometer.
(2 circuits)
02 Engine start/stop.
03 Engine accelerator.
04 Tension force adjustment control (tensioner).

(3/4 circuits)

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 44 D361-0 • rev. 00:19 EN

DIGITAL BUILT-IN DATA READ-OUT

DEG EVOLUTION 4.0

PULLER-TENSIONERS
DEG FEATURES

• Large-sized (7’’) color graphic display, built in the main control pane
• Resistive type glove-friendly touch-screen, intuitive as well as easy in setting-up and browsing through
• High capacity memory: over 200 km of line
• High accuracy and reliability by means of the load cell and encoder system
• USB port for data downloading/uploading
• Software provided to handle data stored

DEG FUNCTIONS

• Real-time reading and recording pulling force, max pull alarm, speed and length of cable/conductor
• ZOOM mode
• Max pull force setting
• Display of working parameters (force, speed, distance covered and time elapsed)
• Help page on board
• Fuel level
• Electronic engine parameters
• Maintenance schedules and alerts
• Self-diagnostics upon machine start

OPTIONAL 069.5

Portable printer c/w connection cable to be plugged to the machine.

Fit for printing the recorded data directly in the job-site.
Supplied in aluminium case.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 45 D320-2 • rev. 04:19 EN

 04
HYDRAULIC SERVICE WINCHES

www.omac-italy.it 47
HYDRAULIC WINCH

F206.10
max pull 10 kN

Hydraulic winch fit to pull one rope in service operations such as

setting-ups and adjustment of transmission lines and underground
cables laying. Direct pull on the drum. One closed hydraulic circuit
allows to continuously vary the speed in both directions by operating
one control device.

HYDRAULIC WINCHES
FEATURES DRUM ENGINE
Dimensions LxWxH 1,65x1,25x1,10 m Internal diameter 240 mm Feeding gasoline
Weight (without rope) 430 kg External diameter 500 mm Power 12 hp / 8,8 kW
Width 480 mm Cooling air
Capacity of rope: Starting by rope
Ø 8 mm 500 m
Ø 6 mm 800 m
PULL PERFORMANCES ALSO AVAILABLE F206.20
Max pull 10 kN Max pull 20 kN
Speed at max pull 0,9 km/h Speed at max pull 1 km/h
Max speed 2,4 km/h Max speed 3 km/h
Pull at max speed 4 kN Pull at max speed 6 kN
Power 16 hp / 12 kW

CONFIGURATION OPTIONAL DEVICES

• Automatic swinging rope-winder with idle position for manual 003 Axle with independent torsion bar suspensions and tires
operation. for towing on the road at 60 km/h, with mechanical parking
• Dynamometer for reading the pull force. brake.
• Safety hydraulic negative brake. 026 PVC cloth cover.
• Rigid axle with tires and drawbar fit for towing at low speed in 028.2 Diesel engine with electric starting.
the job-site. 034 Engine electric starting with battery 12 V.
• Stabilisers and attachments for anchoring. 035 Preselector of max pull force to stop the engine in case of
• Rope-driver rollers fit for vertical and horizontal pull. overpull.
090 Monophase electric motor 220 V.
090.1 Three-phase electric motor.
080 Heat exchanger to cool the oil in the hydraulic circuit.
127.3 Device for lifting material applications.
001.2 Freewheeling of the drum.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 49 6530-0 • rev. 17:20 EN

 HYDRAULIC WINCH

F207.30
max pull 30 kN

Hydraulic winch fit to pull one rope in service operations such as

setting-ups and adjustment of transmission lines and underground
cables laying. Direct pull on the drum. One closed hydraulic circuit
allows to continuously vary the speed in both directions by operating
one control device.
HYDRAULIC WINCHES

FEATURES DRUM ENGINE

Dimensions LxWxH 1,70x1,50x1,35 m Internal diameter 325 mm Feeding diesel
Weight (without rope) 950 kg External diameter 540 mm Power 35 hp / 26 kW
Width 500 mm 35 hp / 26 kW *

Capacity of rope: Cooling water

Ø 12 mm 400 m Starting 12 V

Ø 14 mm 350 m
PULL PERFORMANCES
Max pull 30 kN
Speed at max pull 1,5 km/h
Max speed 5 km/h
Pull at max speed 10 kN

CONFIGURATION OPTIONAL DEVICES

• Automatic swinging rope-winder with idle position for manual 007 Damped axle, overrun brake and drawbar for towing on the
operation. road (homologation excluded).
• Machine control panel with dynamometer and preselector of max 026 PVC cloth cover.
pull force. 027 Metallic coverage with doors.
• Safety hydraulic negative brake. 037 Remote control by cable, with 10 m of cable.
• Rigid axle with tires and drawbar fit for towing at low speed in 038 Radio-control for remote control (max distance 100 m).
the job-site. 046.3 Rope-presser roller on the drum.
• Stabilisers and attachments for anchoring. 058 Service winch with large-groove capstan (Ø 160 or 200 mm)
• Heat exchanger to cool the oil in the hydraulic circuit. fed by the hydraulic circuit of the puller.
• Rope-driver rollers fit for vertical and horizontal pull. Max pulling force 500 kg.
064 Device to control the load descent in case of diesel engine
breakdown.
090.1 Three-phase electric motor.
127.3 Device for lifting material applications.
001.2 Freewheeling of the drum.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 50 6545-0 • rev. 09:20 EN

HYDRAULIC WINCH

F208.50
max pull 50 kN

Hydraulic winch fit to pull one rope in service operations such as

setting-ups and adjustment of transmission lines and underground
cables laying. Direct pull on the drum. One closed hydraulic circuit
allows to continuously vary the speed in both directions by operating
one control device.

HYDRAULIC WINCHES
FEATURES DRUM ENGINE
Dimensions LxWxH 2,40x1,74x1,55 m Internal diameter 457 mm Feeding diesel
Weight (without rope) 1250 kg External diameter 700 mm Power 49 hp / 36 kW
Width 700 mm 57 hp / 42 kW *

Capacity of rope: Cooling water

Ø 16 mm 500 m Starting 12 V

Ø 18 mm 400 m
PULL PERFORMANCES
Max pull 50 kN
Speed at max pull 1,3 km/h
Max speed 6 km/h
Pull at max speed 10,5 kN

CONFIGURATION OPTIONAL DEVICES

• Steel drum. 007 Damped axle, overrun brake and drawbar for towing on the
• Automatic swinging rope-winder. road (homologation excluded).
• Machine control panel with dynamometer and preselector of max 037.2 Remote control by cable, with 10 m of cable.
pull force. 046.3 Rope-presser roller on the drum.
• Safety hydraulic negative brake. 058 Service winch with large-groove capstan fed by the
• Rigid axle with tires and drawbar fit for towing at low speed in hydraulic circuit of the puller. Max pulling force 500 kg.
the job-site. 064 Device to control the load descent in case of diesel engine
• Anchoring points. breakdown.
• Mechanical back and front stabilizers. 127.3 Safety device for lifting material applications.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Metallic coverage with doors.

* According to the EC directive 97/68/CE with subsequent amendments and additions.

Performances of the machine without optional devices, at sea level and temperature 20°C.
Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 51 6557-0 • rev. 00:19 EN

 05
REEL-STANDS and TRAILERS

www.omac-italy.it 53
REEL-STANDS

F155
max load 70 to 200 kN

Stands fit for steel or wooden reels, used for lifting a reel and braking it while stringing
the conductor/cable. The reel stands, as an option, can be hydraulically driven by a
hydraulic power unit. Reel-stands are supplied in pairs.

• No. 1 self-braking disk brake.

• Each stand can be raised or lowered independ­ently by a hydraulic hand pump.
• Mechanical safe-stops mounted on the jack arm.
• Side supports with ball joints.
• Spindle complete with accessories.
• Conical bushes for wooden reels (diameter on demand).
• Welded and painted steel framework with attachments for anchoring.
• Metallic tool box for the accessories.

OPTIONAL DEVICES
423 Additional disk brake (2 brakes in total).
410.3 No. 1 or 2 disc brakes with hydraulic clamp controlled bymanual pump.
408 Hydraulic drive to control the reel rotation, either
recovering or releasing the conductor/cable (to be fed by hydraulic power unit).
078.1 Set of flexible hoses for feeding the drive unit (available lengths: 7, 10, 15 m).
401 Devices fit for steel reel and bushes to centre the reel hole (diameter on
demand).

REEL-STANDS
419.1 Manual rope-winder, fit to stratify different diameters of rope (max reel width
to be confirmed). Available for mod. F155.070 only.
Opt.410.3 Opt.408 419.2 Automatic rope-winder, fit to stratify different diameters of rope (suitable for
standard steel reels mod.F162 and F164). Available for mod. F155.150 and
F155.200.
419.3 Automatic rope-winder, fit to stratify different diameters of rope (max reel
width to be confirmed). Available for mod. F155.070 only.

Reel diameter min-max Reel Spindle Dimensions of each Weight of the pair of
(*) max width diameter reel-stand reel-stands (²)

m m mm m (LxW) kg
F155.070 1,00–2,80 1,50 55 2,10 x 0,50 350
F155.100 1,50-3,20 1,70 70 2,40 x 0,55 540
F155.150 2,00–4,00 3,00 95 3,10 x 0,60 1100
F155.200 2,00–4,00 3,00 95 3,10 x 0,60 1250

(*)on demand we can supply stands fit for reels with bigger diameter - (²) weight of a pair of standard stands, with no optional devices.

Max load Braking torque Braking torque Braking torque Performances with drive opt. 408
of the pair of with standard with 2 brakes with brake Max braking Max recovery Max
reel-stands brake opt. 423 opt. 410.3 torque torque speed (³)
daN daN m daN m daN m daN m daN m km/h
F155.070 7000 150 300 — 225 180 5
F155.100 10000 230 460 600 280 230 5
F155.150 15000 230 460 1000 312 250 5
F155.200 20000 280 560 1200 375 300 5

(³)powered by hydraulic circuit of a tensioner and puller-tensioner or power unit.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 55 A110-0 • rev. 20:18 EN

 REEL-STANDS

F157
Reel-cradle fit for lifting and unwinding steel rope reel. Fully galvanized. Completely
demountable for an easy transport. Complete with reel shaft.

OPTIONAL DEVICES
410.1 Disc brake for braked unwinding (F157.14.5 and F157.19braking torque 150
daN m)
410.4 Disc brake with high brake capacity (F157.19 only - braking torque 280 daN
m)
REEL-STANDS

opt.410.1

Reel diameter Overall dimensions

Spindle (ØD) Load Weight
min - max (A x B x C)
m m mm daN kg
F157.14.S 1,10 - 1,40 2,50 x 1,10 x 0,95 50 2000 72
F157.19 1,40 - 1,90 3,00 x 1,10 x 1,10 50 2600 160

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 56 A190-1 • rev. 03:20 EN

REEL-WINDER TROLLEYS

F106
Reel-winder trolley fit for reel transport and wire recovering/releasing,
designed to be used with pullers, puller-tensioners or hydraulic power
units, from which it receives the transmission needed to move the reel.
It can even be fitted with own motorization.

Reel Ømax Capacity Rope Ø Max pull (¹) Max speed (¹) Dimensions AxBxC Weight
mm kg mm daN km/h m kg
F106.110.1 1100 1200 10-13-16 150 4 1,70 x 1,25 x 1,00 450
F106.140.1 1600 2000 16-18-20 250 5 2,00 x 1,35 x 1,40 700
F106.190.1 1900 3000 18-20-24 300 5 2,50 x 1,80 x 1,40 1200

REEL-STANDS
(¹) performances obtained when connected to the hydraulic circuit of a puller or puller-tensioner

WITH AUTONOMOUS DRIVE (OPT. 417)

Speed at
Engine power Max pull (²) Max speed Dimensions AxBxC Weight
max pull (²)
kW hp daN m/min m/min m kg
F106.110.1 4,4 6 200 30 65 2,00 x 1,25 x 1,00 540
F106.140.1 5,9 8 300 30 65 2,20 x 1,35 x 1,40 800
F106.190.1 7,3 10 400 30 65 2,50 x 1,40 x 1,40 1350
(²) on the middle layer

CONFIGURATION OPTIONAL DEVICES

• Bi-directional hydraulic motor, controlled directly by the machine 416 Negative safety brake that self-operates in case of pressure
panel through flexible hoses, fit for moving the reel by means of drop in the hydraulic circuit feeding.
a reduction unit. 417 Installation of a diesel engine that operates a hydraulic
• Neutral device to unwind the rope easily. power unit, fit to make the reel-winder autonomous.
• Reel lifting arm hydraulic operated by manual pump. 438.2 Device that allows to lift the reel by using the reel-rotation
• Automatic rope-winder complete with rope-driver rollers, fit for circuit.
winding three different diameters of rope on the reel. 078.1 Set of flexible hoses for feeding the drive unit (lengths
The rope-winder may also be operated manually. available: 5, 10, 15 m).
• Frame with three tires, one of them steering with drawbar, fit for
towing in the job-site.
• Mechanical stabilisers and anchoring and lifting points.
• Devices for locking the reel rotation mechanically.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 57 A240-0 • rev. 11:17 EN

 REEL-WINDER TROLLEYS

F106.220
Reel-winder trolley designed for recovering/pulling and releasing
ropes and conductors to/from steel reels. The reel is operated by a
hydraulic motor fed by a separate power unit or by the auxiliary
hydraulic circuit of a puller, tensioner or puller/tensioner.

FEATURES PERFORMANCES
Reel diameter (min/max) 1400/2200 mm Max pull 500 daN
Reel width (max) 1560 mm Speed at max pull 2,5 km/h
Max weight of the reel 8000 kg Max speed 5 km/h
REEL-STANDS

Dimensions AxBxC 3,70 x 2,41 x 1,50 m Pull at max speed 250 daN
Weight 1950 Kg

CONFIGURATION OPTIONAL DEVICES

• Hydraulic motor with reduction group connected to the spindle. 005.1 Tandem axle with torsion bar suspensions, air braking
• Negative safety brake self-operating in the event of hydraulic system and lights.
breakdown. 006 Pneumatic braking system and lights.
• Reel-carrier arms with hydraulic lifting of reel, operated through 059 Extra metallic reel F162.220.
a manual pump. 096.1 Hydraulic power unit with gasoline engine mounted on
• Rigid axle, tires, hand brake and drawbar for towing at low speed trolley, to control the reel-lifter and stabilisers.
the job-site. 417.1 Hydraulic power unit with diesel engine mounted on trolley
• Adjustable pivoting reel. or separate, mounted on the trolley for autonomous use in
• Mechanical stabilisers and attachments for anchoring and lifting conductor braking and recovering.
the machine.
• Reel arm fit for reels max diameter 2200 mm.
• Spindle with dragger and bushes for reels.
• Steel reel mod. F162.220
• Automatic rope-winder, fit to stratify the different diameters of
rope on the reel. The rope-winder can also be operated manually.
• Set of flexible hoses for connection to the hydraulic power unit,
length 15 m.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 58 A245-0 • rev. 08:17 EN

TRAILERS

F10.50
Trailer fit to transport and unwind reels of cable weighing up to
4000 kg.

TRAILER CHARACTERISTICS
Dimensions LxWxH 6,40x3,30x2,60 m
Total weight with drum 5000 kg
Drum max diameter 2800 mm

REEL-STANDS
Drum max width 1500 mm
Performances with optional drive (opt.408.4 or 408.5)
Pulling force 0 - 9 kN
Pulling speed 0 - 60 m/min
ALSO AVAILABLE TRAILERS WITH DIFFERENT CAPACITY

CONFIGURATION OPTIONAL DEVICES

• Framework made of 3 steel sections. 006.1 12V light system.

• Spindle rotating on ball joints, with arm for close and drag the 006.6 Hand parking brake for trailer.
reel, and collars for wooden reel. 425 Mechanical back supports.
• Safe mechanical locking in working position. 438 Hydraulic reel lift with hand pump.
• Mechanical locking of the spindle rotation for safe transport. 007-A Damped single axle, towing speed 60 km/h. Complete with
• Single rigid axle and rigid towing assembly. ABS system.
• Towing speed 40 Km/h. 007-B Damped single axle, towing speed 80 km/h. Complete with
• Front support. ABS system and pneumatic suspensions.
• No brakes and No lights. 029.2 Electric start of the diesel/gasoline engine, with battery.
401 Devices fit for using steel reels with the reel-elevator.
408.4 Hydraulic drive with quick connections for controlling the
reel rotation both recovering and releasing cables, complete
with power unit and gasoline engine.
408.5 Hydraulic drive with quick connections for controlling the
reel rotation both recovering and releasing cables, complete
with power unit and diesel engine.
410.1 Disk brake with manual regulation of the braking to keep
under control the unwinding.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 59 A176-0 • rev. 04:17 EN

 TRAILERS

F10.100
Trailer fit to transport and unwind reels of cable weighing up to
8000 kg.

TRAILER CHARACTERISTICS
Dimensions LxWxH 7,30x3,50x2,70 m
Total weight with drum 10000 kg
Drum max diameter 3000 mm
REEL-STANDS

Drum max width 1600 mm

Performances with optional drive (opt.408.4 or 408.5)
Pulling force 0 - 9 kN
Pulling speed 0 - 60 m/min

ALSO AVAILABLE TRAILERS WITH DIFFERENT CAPACITY

CONFIGURATION OPTIONAL DEVICES

• Framework made of 3 steel sections. 006.1 12V light system.

• Spindle rotating on ball joints, with arm for close and drag the 006.6 Hand parking brake for trailer.
reel and collars for wooden reels. 425 Mechanical back supports.
• Safe mechanical locking in working position. 438 Hydraulic reel lift with hand pump.
• Mechanical locking of the spindle rotation for safe transport. 005.1 Damped tandem axle, towing speed 60 km/h.
• Single rigid axle and rigid towing assembly. Complete with ABS system.
• Towing speed 40 Km/h. 005.3 Damped tandem axle, towing speed 80 km/h.
• Front support. Complete with ABS system and Pneumatic suspensions.
• No brakes and no lights. 029.2 Electric start of the diesel/gasoline engine, with battery.
401 Devices fit for using steel reels with the reel-elevator.
408.4 Hydraulic drive with quick connections for controlling the
reel rotation both recovering and releasing cables, complete
with power unit and gasoline engine.
408.5 Hydraulic drive with quick connections for controlling the
reel rotation both recovering and releasing cables, complete
with power unit and diesel engine.
410.1 Disk brake with manual regulation of the braking to keep
under control the unwinding.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 60 A17B-1 • rev. 04:17 EN

MOTORIZED REEL-TRAILERS

F10.AF.20.20
Trailer for reels, fit for recovering and releasing ropes and conductors
to/from wooden or steel reels. The reel, operated by a hydraulic motor,
allows to recover the wire or conductor (puller use) and to release it
(tensioner use).

FEATURES REEL TRANSPORT CAPACITY

Dimensions AxBxC 3,60x2,20x1,40 m Transportable reel dimensions
Weight (without rope opts) 1750 kg Diameter max 1800 mm
Width max 1100 mm

REEL-STANDS
Weight max 2000 kg

ENGINE PERFORMANCE
Feeding diesel Max pull/tension force 2000 daN
Power 21 hp/15,4 kW Speed at max pull/tension 10 m/min
Max speed 50 m/min
the performances here above are referred to the
rope-layer diameter 500 mm

CONFIGURATION OPTIONAL DEVICES

• Hydraulic power unit made of electric motor or air cooled diesel 007 Axle with independent torsion bar suspensions, adjustable
engine with electric starting and a variable-delivery hydraulic drawbar, overrun braking system, tyres and lights, for
pump, that allows to continuously and gradually the speed of towing on road at 60 km/h (without homologation).
rotation of the reel, in either directions, by operating one control 059 Steel cylindrical reel fit for reel wires and nylon ropes (Øext
handle only (puller use). 1400 x 560 mm).
• Hydraulic circuit fit for braking the wire (tensioner use). 060 Conical metallic reels with opening side (Øext 1400 x 560
• Control panel with control and instruments for the machine and mm).
the engine. 060.1 Conical metallic reels with opening side (Øext 1400 x 800
• Dynamometer to check the pulling force, with possibility to set a mm).
maximum limit of the force. 419.2 Automatic rope-winder, fit to stratify the different diameters
• Hydraulic motor with reduction group connected to the spindle. of rope on the reels of different width.
• Self-operating negative safety brake.
• Reel-carrier arms with hydraulic lifting of reel, operated through
the power unit.
• Rigid axle, tires, hand brake and drawbar for towing at low speed
the job-site.
• Adjustable pivoting wheel.
• Stabilisers and attachments for anchoring and lifting the machine.
• Spindle with dragger and conical bushes for wooden reels (reel
hole diameter to be specified).
• Dragger and cylindrical bushes for steel reels (reel hole diameter
to be specified).

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 61 A15L-0 • rev. 05:17 EN

 MOTORIZED REEL-TRAILERS

F10.M
Trailer designed for transporting reels as well as for recovering and
releasing ropes and conductors to/from wooden or steel reels.
The trailer can host up to 3 or 4 reels. The reels, operated by a
hydraulic motor, allow to recover the wires (like a puller) and to
release them (braked tension).

F10.M.10.10.3 F10.M.15.30.3 F10.M.20.30.4

Max number of reel hosted 3 3 3/4
Reel diameter (max) 1200 mm 1200 mm 1400 mm
Reel width (max) 1100 mm 1100 mm 1400 mm
Max pulling/braking force (¹) 20 kN @ 20 m/min 30 kN @ 20 m/min 30 kN @ 25 m/min
REEL-STANDS

Max speed at low force (²) 100 m/min 100 m/min 70 m/min
Engine power 18 hp (13,2 kW) 27 hp (19,8 kW) 30 hp (22 kW)
Max reel weight 1000 kg 1600 kg 2000 kg
Dimensions (LxWxH) 3,4+1,2x2,3x1,7 m 3,6+1,2x2,3x1,8 m 4,3+1,2x2,4x2,0 m
Weight (without optional devices) 1000 kg 1800 kg 2000 kg
(¹) values referred to the medium layer of rope (²) values referred to the very external diameter of rope (full reel)

CONFIGURATION OPTIONAL DEVICES

• Hydraulic power unit made of an air cooled diesel/gasoline 007 Axle with suspensions, drawbar, overrun brake, lights and
engine with electric starting and a variable-delivery hydraulic tires for towing on the road at 60 km/h. (homologation
pump, that allows to continuously and gradually the speed of excluded).
rotation of the reel, in either directions, by operating one control 008 Axle with leaf spring suspensions, drawbar, pneumatic
handle only. braking system, tyres and lights for towing on the road at
• Hydraulic circuit fit for braking the wire. 60 km/h.
• Control panel with control and instruments for the machine and 026 Protective PVC cover.
the engine. 028.1 Water-cooled diesel engine.
• Dynamometer to check the pulling force, with possibility to set a 046.B No. 3 or 4 rope-winders fit to stratify several diameters of
maximum limit of the force. wires on the reels, adjustable, with neutral position.
• Hydraulic motor with reduction group connected to the spindle. 060 No. 3 or 4 conical metallic reels with opening side.
• Possibility to use one or more reels idling the others. 061 No. 3 or 4 metallic reels fit for 1500 m of rope dia. 10mm.
• Self-operating negative safety brake. 060.1 No. 1 steel reel fit for 2500 m of rope diam. 14mm.
• Reel-carrier arms with hydraulic lifting of reel, operated through
the power unit.
• Rigid axle, tires, hand brake and drawbar for towing at low speed
in workplace.
• Adjustable pivoting wheel.
• Hydraulic stabilisers and attachments for anchoring and lifting
the machine.
• Spindle with dragger and conical bushes for wooden reels (reel
hole diameter to be specified).
• Dragger and cylindrical bushes for steel reels (reel hole diameter
to be specified).
• Heat exchanger to cool the hydraulic oil.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 62 A155-1 • rev. 07:17 EN

 06
REELS and ROPES

www.omac-italy.it 63
ANTI-TWISTING STEEL ROPE

21.12
Anti-twisting galvanised steel rope specifically designed for stringing
operations. Made up of 12 braided strands. High resistant to break,
antitwisting, flexible, safe and easy to handle. The linear contact
between the braided strands grants a low stress on the rope.
Supplied wound up on steel or wooden reels.

Nominal diameter Breaking load Weight Standard Lengths (*)

mm kN kg m
21.12.08 8 44 0,22 1000
21.12.10 10 72 0,35 1000
21.12.13 13 105 0,55 1000
21.12.16 16 163 0,80 1000
21.12.18 18 235 1,07 1000
21.12.20 20 268 1,24 1000
21.12.22 22 330 1,56 900

REELS & ROPES

21.12.24 24 380 1,80 800
21.12.28 28 480 2,80 600

(*) other lengths on request

HIGH RESISTANCE

Nominal diameter Breaking load Weight Standard Lengths (*)

mm kN kg m
21.18.22 22 402 1,86 900
21.18.24 24 490 2,34 800
21.18.30 30 720 3,25 500
(*) other lengths on request

OPTIONAL DEVICES

146.2 Spliced eyes at both ends

146.3 Clamped eyes at both ends

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 65 A425-0 • rev. 14:17 EN

 ROPES

22...1
Pilot rope made of an external polyester mesh stocking and a hi-tenacity nylon core.
Double torsion. Highly resistant to wear and UV rays. white colour.
Supplied wound up on wooden reels or in coils.

OPTIONAL DEVICES
• Clamped eyes with metallic collars at the ends (note: the clamped eyes have
breaking load 30-35% lower than the rope).
• Sewn eyes (note: available up to Ø18 mm. The breaking load of the clamped eyes
is the same as the breaking load of the rope).

Nominal diameter Elongation under tension Breaking load Weight Standard Lengths (*)
mm at 10 % BL (¹) at 30 % BL (²) daN kg/m m
22.06.1 6 4% 7,5% 750 0,027 500 1000 1500 2000 3000
22.08.1 8 4% 7,5% 1.200 0,045 500 1000 1500 2000 3000
22.10.1 10 4% 7,5% 2.000 0,073 500 1000 1500 2000 3000
22.12.1 12 4% 7,5% 3.500 0,115 500 1000 1500 2000 3000
22.14.1 14 4% 7,5% 4.300 0,142 500 1000 1500 2000
22.16.1 16 4% 7,5% 5.000 0,195 500 1000 1500 2000
22.18.1 18 4% 7,5% 5.800 0,240 500 1000 1500
22.20.1 20 4% 7,5% 6.500 0,295 500 1000 1500
22.22.1 22 4% 7,5% 8.300 0,350 500 900
22.24.1 24 4% 7,5% 9.500 0,410 500 800

(¹) elongation rate at 10% of breaking load (²) elongation rate at 30% of breaking load

22...2
REELS & ROPES

Pilot rope made of polypropylene and polyester hi-tenacity 12-fuses mesh.

Light-weight, waterproof and UV resistant. Easy to splice without any special tool.
Green colour. Supplied wound up on wooden reels or in coils.

OPTIONAL DEVICES
• Hand-spliced ends.

Nominal diameter Elongation under tension Breaking load Weight Standard Lengths (*)
mm at 50 % BL (¹) daN kg/m m
22.10.2 10 5% 1.500 0,040 1000
22.12.2 12 5% 2.300 0,060 1000
22.14.2 14 5% 2.800 0,075 1000
22.16.2 16 5% 3.300 0,088 1000
22.18.2 18 5% 4.500 0,120 1000
22.20.2 20 5% 5.500 0,150 1000
22.22.2 22 5% 6.200 0,165 800
22.24.2 24 5% 8.500 0,240 800

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 66 A430-0 • rev. 14:17 EN

ROPES

23...P
Rope with Dyneema-core and polyester covering. Supplied wound up on wooden reels
or in coils.

OPTIONAL DEVICES
• Clamped eyes with metallic collars at the ends (note: the
clamped eyes have breaking load 30-35% lower than the rope).
• Hand-spliced eyes.
• Head stocking-grip with eyes.
• Steel reel Ø 1100, 1400 or 1600 mm.

Nominal diameter Elongation under tension Breaking load Weight Standard Lengths
mm at 8 % BL daN kg/m m
23.06.P 6 3% 3.100 0,050 500 1000 1500 2000 3000
23.08.P 8 3% 5.480 0,064 500 1000 1500 2000 3000
23.10.P 10 3% 8.210 0,078 500 1000 1500 2000 3000
23.12.P 12 3% 11.860 0,120 500 1000 1500 2000
23.14.P 14 3% 16.430 0,139 500 1000 1500 2000
23.16.P 16 3% 20.990 0,200 500 1000

23...D

REELS & ROPES

High resistance Dyneema rope. Light-weight and wear resistant. Supplied wound up on
wooden reels or in coils.

OPTIONAL DEVICES
• Clamped eyes with metallic collars at the ends (note: the
clamped eyes have breaking load 30-35% lower than the rope).
• Hand-spliced eyes.
• Head stocking-grip with eyes.
• Steel reel Ø 1100, 1400 or 1600 mm.

Nominal diameter Elongation under tension Breaking load Weight Standard Lengths
mm at 2 % BL daN kg/m m
23.06.D 6 3% 4.000 0,02 500 1000 1500 2000 3000
23.08.D 8 3% 6.000 0,03 500 1000 1500 2000 3000
23.10.D 10 3% 9.000 0,05 500 1000 1500 2000 3000
23.12.D 12 3% 13.000 0,07 500 1000 1500 2000
23.14.D 14 3% 18.000 0,08 500 1000 1500 2000
23.16.D 16 3% 23.000 0,12 500 1000 1500 2000
23.18.D 18 3% 29.000 0,17 500 800 1000
23.20.D 20 3% 36.500 0,20 500 800 1000

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 67 A435-0 • rev. 06:17 EN

 BRIGHT STEEL ROPE

C02...AC C02...LR
Bright steel rope 216 wires + steel core. Construction 6 (14+7/7+7+1) Bright steel rope 133 wires. Construction 19x7.
WS+WR. Right and left crossed. Lang lay or regular lay. Resistance of wires 200 kg/mm².
UNI 7297-74. Resistance of wires: 180 kg/mm².

OPTIONAL
• Galvanization

Nominal diameter Wires diameter Breaking load Weight Breaking

Rope diam. Wires diam. Sect. Weight
mm mm kN kg/m load
6 0,38 27,2 0,15 mm mm mm2 kN kg/m
8 0,50 47,3 0,28 Lang lay
10 0,62 75 0,43 6 0,38 16,5 26 0,15
11 0,68 89 0,52 8 0,51 29,3 48,1 0,27
12 0,75 108 0,62 10 0,64 45,7 72,1 0,41
14 0,77 131 0,82 11 0,70 55,3 87,2 0,50
16 0,88 168 1,07 12 0,76 65,8 104 0,60
18 0,99 220 1,35 13 0,83 77,3 122 0,70
20 1,10 270 1,68 14 0,89 89,6 141 0,81
22 1,22 320 2,03 16 1,02 117 185 1,06
24 1,33 380 2,40 18 1,15 148 234 1,34
26 1,44 450 2,83 Regular lay
28 1,55 504 3,30 20 1,27 183 288 1,66
30 1,66 600 3,80 22 1,40 221 349 2,01
32 1,77 670 4,33 24 1,53 263 415 2,39
26 1,65 309 487 2,81

C02...AR C02...AT
REELS & ROPES

Bright steel rope 216 wires “compacted strands”, high resistance, with Bright steel rop. Construction 35x7. Resistance of wires 220 kg/mm².
metal core.
Resistance of wires: 220 kg/mm²

Nominal diameter Wires diameter Breaking load Weight Nominal diameter Wires diameter Breaking load Weight
mm mm kN kg/m mm mm kN kg/m
10 0,59 90,2 0,45 8 0,40 49,2 0,26
11 0,66 111 0,55 10 0,50 77 0,42
12 0,72 132 0,67 12 0,60 110,8 0,60
13 0,78 153 0,78 14 0,70 150,9 0,82
14 0,84 176 0,90 16 0,80 197,1 1,07
16 0,96 240 1,18 18 0,90 249,4 1,36
18 1,08 294 1,48 20 1,00 308 1,68
20 1,20 367 1,85 22 1,10 372,6 2,03
22 1,32 443 2,25 24 1,20 443,5 2,42
24 1,41 525 2,50 26 1,30 520,5 2,84
26 1,53 613 3,04 28 1,40 603,6 3,29
28 1,64 704 3,64 30 1,40 693 3,78
30 1,76 809 4,20

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 68 A445-0 • rev. 00:17 EN

STEEL REELS FOR ROPES

F162 F164

Welded and painted steel reel. Welded and painted steel conical reel with openable side.

OPTIONAL DEVICES OPTIONAL DEVICES

02 Pair of standard dials. 02 Pair of standard dials.
03 Pair of dials equipped with ball bearings. 03 Pair of dials equipped with ball bearings.
04 Reinforced reel, made of square tubular (30% heavier than 05 Drum core covered with steel sheet.
the standard version).

Dimensions Weight Dimensions Weight

mm (without rope) mm (without rope)
A B C D E F kg A B C D E F kg
F162.075 750 530 460 245 50 38 F164.075 750 530 460 245 50 50

REELS & ROPES

F162.110 1100 560 460 570 420 50 66 F164.110 1100 560 460 570 420 50 85
F162.140 1400 560 460 570 420 50 105 F164.140 1400 560 460 570 420 50 115
F162.160 1600 560 460 570 420 50 120 F164.160 1600 560 460 570 420 50 130
F162.190 1900 560 460 570 420 50 140 F164.190 1900 560 460 570 420 50 220
F162.220 2200 1560 1400 1010 420 100 950 F164.220 2200 1310 1170 1010 420 100 1050

REEL CAPACITY (meters of rope)

Rope diameter F162.075 F162.110 F162.140 F162.160 F162.190 F162.220
(mm) F164.075 F164.110 F164.140 F164.160 F164.190 F164.220
6 2000 6300 13000 17000 25000 -
7 1500 4500 9000 12000 18000 -
8 1200 3500 6000 5500 14000 -
9 900 2800 5400 7500 11000 -
10 800 2300 4400 6000 9000 33000
11 500 1900 3600 5000 7500 31000
12 450 1600 3000 4200 6000 22000
13 400 1400 2600 3600 5400 19000
14 300 1250 2200 3000 4600 16000
16 250 1000 1700 2400 3500 13000
18 - 800 1300 1900 2800 10000
20 - 650 1100 1600 2200 8000
22 - 500 900 1200 1900 6000
24 - - 750 1000 1500 5000
26 - - 650 900 1300 4500
28 - - 560 800 1100 4000
30 - - 490 700 1000 3500
32 - - 430 600 850 3000

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 69 A310-1 • rev. 04:20 EN

 07
PULLEY BLOCKS

www.omac-italy.it 71
RUNNING OUT BLOCKS

F144
F150
Single sheave running out block fit for stringing one conductor. Aluminium sheave
mounted on sealed ball bearings. Groove lined with nylon sectors. Openable galvanised
steel frame with non-fleeting device. Standard swivelling fork attachment.

OPTIONAL DEVICES

301.2 Fix hook (code FT).

301.1 Swivelling hook attachment (code GG).
314 Bottom groove lined with aluminium sectors (only for sheaves with groove
width E= 60, 68 and 95 mm).
327 Non-fleeting device as big as half wheel circumference.
326 Grounding device (only for wheels with groove width
F144 - F150 E=60, 68 and 95 mm;opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (for opt.326).
328 Special U-shaped frame.
320 Box for transport and stocking.

opt.327 F144 with

opt.326+328

PULLEY BLOCKS
optional swivelling optional fix hook
hook (cod. GG) (cod. FT)

Dimensions (mm) Working Load Weight

A A1 A2 B C D E F G kN kg
F150.23.1 25 25 26 14 110 230 50 150 300 27 8,0
F150.35 30 27 26 16 110 350 60 170 440 30 11,5
F144.50.70 40 27 27 20 150 500 68 188 630 33 25
F144.65.70 40 33 27 20 160 650 68 188 770 40 32
F144.65.95 40 33 27 20 150 650 95 210 770 40 35
F144.80.70 45 33 27 20 160 800 68 188 900 60 36
F144.80.95 45 33 27 20 150 800 95 210 900 60 42
F144.100.95 45 37 27 25 150 1000 95 230 1120 60 52

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 73 B112-0 • rev. 17:18 EN

 RUNNING OUT BLOCKS

F145
Three-sheave running out block fit for stringing two- three-bundled conductors.
Aluminium sheaves mounted on sealed ball bearings. Grooves lined with nylon sectors.
Galvanised steel frame with non-fleeting devices on lateral sheaves.
Demountable attachment revolving by 90° (available with tight wheel).

OPTIONAL DEVICES
314 Sheaves lined with aluminium sectors.
320 Cage for stocking and transport.
326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (opt.326).
325 Reinforced central sheave with total working load 80 kN (for mod. F145.80.95
F145.100.95 only).
330 Central sheave with groove width 95 mm (for models F145.xx.68 e F149 xx.68).
327.1 Non-fleeting device between the central wheel and the lateral ones.

Dimensions (mm) Working Load Weight

A B C D E F G H I L kN kg
F145.35.60 20 21 60 350 900 400 440 200 400 100 26 40
F145.50.68 25 25 68 500 1250 550 630 280 500 145 40 93
F145.65.68 25 25 68 650 1400 550 770 280 500 145 40 112
F145.65.95 25 30 95 650 1400 550 770 280 590 175 60 125
F145.80.68 25 25 68 800 1500 550 900 280 500 145 60 128
F145.80.95 25 30 95 800 1550 550 900 300 590 175 60 (¹) 156 (¹)
F145.100.95 25 30 95 1000 1750 550 1100 300 590 175 67 (¹) 200 (¹)
Larger diameters on demand
(¹) With opt.325 working load 80 kN. Weight F145.80.95=165 kg; F145.100.95=218 kg

F149
Five-sheave running out block fit for stringing four-bundled conductors.
Aluminium sheaves mounted on sealed ball bearings. Grooves lined with nylon sectors.
Galvanised steel frame with non-fleeting devices on lateral sheaves.
Demountable attachment revolving by 90° (available with tight wheel).
PULLEY BLOCKS

OPTIONAL DEVICES
314 Sheaves lined with aluminium sectors.
320 Cage for stocking and transport.
326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (opt.326).
325 Reinforced central sheave with total working load 80 kN (for mod. F145.80.95
F145.100.95 only).
330 Central sheave with groove width 95 mm (for models F145.xx.68 e F149 xx.68).
327.1 Non-fleeting device between the central wheel and the lateral ones.

Dimensions (mm) Working Load Weight

A B C D E F G H L kN kg
F149.50.68 25 25 520 500 68 145 100 700 1250 40 128
F149.65.68 25 25 590 650 68 145 100 700 1400 40 147
F149.65.95 25 30 590 650 95 175 130 820 1400 60 185
F149.80.68 25 25 590 800 68 145 100 700 1560 60 180
F149.80.95 25 30 590 800 95 175 130 820 1560 60 (¹) 220 (¹)
F149.100.95 30 30 590 1000 95 175 130 820 1800 67 (¹) 272 (¹)
Larger diameters on demand
(¹) With opt.325 working load 80 kN. Weight F149.80.95=250 kg; F149.100.95=290 kg

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 74 B120-0 • rev. 27:17 EN

RUNNING OUT BLOCKS

F188
Six-sheave running out block, fit for stringing 6 conductors. Aluminium sheaves
mounted on sealed ball bearings. Grooves lined with nylon sectors. Steel frame with
non-fleeting devices on lateral sheaves. Demountable attachment revolving by 90°.

OPTIONAL DEVICES
314 Sheaves lined with aluminium sectors.
326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (opt.326).

Dimensions (mm) Working Load Weight

A B C D E F G H I L M kN kg
F188.65.68 30 30 68 650 1400 550 770 400 750 100 145 40 180
F188.65.95 30 30 95 650 1400 550 770 400 880 125 170 60 207
F188.80.68 30 30 68 800 1500 550 900 500 750 100 145 60 204
F188.80.95 30 30 95 800 1550 550 900 500 880 125 170 60 240

F189
Seven-sheave running out block, fit for stringing 4 or 6 conductors. Aluminium sheaves
mounted on sealed ball bearings. Grooves lined with nylon sectors. Steel frame with
non-fleeting devices on lateral sheaves. Demountable attachment revolving by 90°.

PULLEY BLOCKS
OPTIONAL DEVICES
314 Sheaves lined with aluminium sectors.
325 Central sheave lined with steel sectors.
326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (opt.326).

Dimensions (mm) Working Load Weight

A B C D E F G H I L M kN kg
F189.65.68 30 30 68 650 1400 590 100 400 930 100 145 40 195
F189.65.95 30 30 95 650 1400 590 125 400 1100 125 170 60 235
F189.80.68 30 30 68 800 1560 590 100 500 930 100 145 60 240
F189.80.95 30 30 95 800 1560 590 125 500 1100 125 170 60 295

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 75 B128-0 • rev. 08:17 EN

 RUNNING OUT BLOCKS

F145.S
Detachable three-sheave running out block fit for stringing two- three-bundled
conductors. The frame contains 3 running-out blocks that can be used singularly.
Aluminium sheaves mounted on sealed ball bearings. Grooves lined with nylon sectors.
Galvanised steel frame. Central sheave mounted on double bearings.
Demountable attachment revolving by 90°.

OPTIONAL DEVICES
314 Sheaves lined with aluminium sectors.
326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block.

Dimensions (mm) Working Load Weight

A B C D E F G H I L kN kg
F145.S.50.68 25 25 68 500 1480 600 630 280 590 148 40 122
F145.S.65.68 25 25 68 650 1550 600 770 280 590 148 40 145
F145.S.65.95 25 30 95 650 1650 600 770 280 670 178 60 165
F145.S.80.68 25 25 68 800 1750 600 900 280 590 148 60 167
F145.S.80.95 25 30 95 800 1750 600 900 300 670 178 60 190
F145.S.100.95 30 30 95 1000 1980 600 1100 300 700 178 67 230

F149.S
Detachable five-sheave running out block fit for stringing four-bundled conductors.
The frame contains 5 running-out blocks that can be used singularly.
Aluminium sheaves mounted on sealed ball bearings. Grooves lined with nylon sectors.
Galvanised steel frame. Central sheave mounted on double bearings. Demountable
PULLEY BLOCKS

attachment revolving by 90°.

OPTIONAL DEVICES
314 Sheaves lined with aluminium sectors.
326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block.

Dimensions (mm) Working Load Weight

A B C D E F G H I L kN kg
F149.S.50.68 25 25 68 500 1480 600 630 280 890 148 40 185
F149.S.65.68 25 25 68 650 1550 600 770 280 890 148 40 210
F149.S.65.95 25 30 95 650 1650 600 770 280 1050 178 60 245
F149.S.80.68 25 25 68 800 1750 600 900 280 890 148 60 249
F149.S.80.95 25 30 95 800 1750 600 900 300 1050 178 60 300
F149.S.100.95 30 30 95 1000 1980 600 1100 300 1070 178 67 328

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 76 B122-0 • rev. 07:17 EN

RUNNING OUT BLOCKS

F144...TA
F150...TA
Tandem sheave running out block fit for stringing one conductor.
Aluminium sheave mounted on sealed ball bearings. Groove lined with nylon sectors.
Openable galvanised steel frame with non-fleeting device. Standard swivelling fork
attachment. Designed to distribute high working loads over two pulleys.
The tandem sheaves are mounted on a special steel frame consisting of a yoke and two
arms. The sheaves can also be used as standard single pulleys.

F150...TA

F144...TA

PULLEY BLOCKS
Dimensions (mm) Working load Weight
A B C D E F G kN kg
F150.23.TA 20 16 230 160 300 50 650 40 27
F150.35.TA 20 18 350 160 440 60 920 45 38
F144.50.70.TA 25 21 500 350 630 68 1300 50 72
F144.65.70.TA 25 21 650 350 770 68 1600 55 85
F144.65.95.TA 25 21 650 350 770 95 1600 65 95
F144.80.70.TA 25 21 800 350 900 68 1860 65 98
F144.80.95.TA 25 21 800 350 900 95 1860 80 120
F144.100.95.TA 30 30 1000 400 1120 95 2300 80 145

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 77 B118-0 • rev. 01:18 EN

 RUNNING OUT BLOCKS

F144...E
F150...E
Single sheave block fit for stringing a pilot rope by helicopter. Proper devices allow
to position the pulling rope in the sheave groove and keep it inside the groove during
stringing operations. Aluminium sheave mounted on waterproof bearings. Groove lined
with nylon sectors. Galvanized steel frame. Fix attachment.

OPTIONAL DEVICES

314 Sheaves lined with aluminium sectors.

326 Grounding device (opt.314 needed).
327 Non-fleeting device on half wheel circumference.
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (opt.326).

Dimensions Working
Weight
(mm) load
A B C D E F kN kg
F150.23.50.E 300 230 50 220 550 18 26 15
F150.35.60.E 440 350 60 240 680 20 30 22
F144.50.70.E 630 500 68 340 980 25 60 49
F144.65.70.E 770 650 68 340 1220 25 40 52
F144.65.95.E 770 650 95 370 1220 25 40 61
F144.80.70.E 900 800 68 340 1320 25 40 64
F144.80.95.E 900 800 95 380 1320 25 40 68
opt.329 opt.326 and 327
F144.100.95.E 1120 1000 95 380 1560 25 67 85

F145...E
Three-sheave block fit for stringing a pilot rope by helicopter. Proper devices allow to
position the pulling rope in the sheave groove, and keep it inside the groove during
stringing operations. Aluminium sheave mounted on waterproof bearings. Groove lined
with nylon sectors. Galvanized steel frame. Fix attachment.
PULLEY BLOCKS

OPTIONAL DEVICES

314 Sheaves lined with aluminium sectors.

326 Grounding device (opt.314 needed).
329 Copper cable, 6-m long, with transparent PVC protection, with a clamp for
tower and a terminal for the running out block (opt.326).

Dimensions Working
Weight
(mm) load
A B C D E F kN kg
F145.50.70.E 630 500 68 670 1080 25 60 120
F145.65.70.E 770 650 68 670 1320 25 60 160
F145.65.95.E 770 650 95 780 1320 25 60 170
F145.80.70.E 900 800 68 670 1420 25 60 175
F145.80.95.E 900 800 95 800 1420 25 60 196
F145.100.95.E 1120 1000 95 800 1640 25 67 250

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 78 B125-0 • rev. 13:17 EN

RUNNING OUT BLOCKS

F151.235
Counter-pull running-out block. Galvanised steel frame, openable side, with swivelling
hooks on the ends. Automatic releasing device for recovering the unit.
vers. AS Galvanised steel pulley mounted on ball bearings.
vers. BS Aluminium pulley lined with interchangeable nylon ring.

Dimensions (mm) Working Load Weight

d D E F G H L R kN kg
F151.235.AS 240 300 25 25 65 600 170 95 28 21
F151.235.BS 235 300 25 25 50 550 150 95 22 20

F151
Running out block fit for stringing shield wires. Galvanized steel sheave mounted on
ball bearings. Galvanized steel frame with non-fleeting device.
Different attachments available:
A - swivel hook (optional).
B - swivel fork (standard).

PULLEY BLOCKS
C - fix hook (optional).
Blocks with different dimen­sions can be built on demand.

Attachment Working
Dimensions (mm) Weight
type Load
d D E F G H L R kN kg
F151.235.A A 230 300 25 22 65 400 155 100 28 13
F151.235.B B/C 230 300 25 20 65 400 155 70 28 13

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 79 B145-1 • rev. 02:17 EN

 SNATCH-BLOCKS

C86.ST
Openable snatch block. Galvanised steel sheave mounted on ball bearings.
Galvanised steel frame with openable side. Standard hook attachment.

OPTIONAL DEVICES
eye attachment A2

Working Max
Dimensions (mm) Weight
Load rope
kN Ø A B D E F G H kg
C86.ST.20.1 30 20 23 28 102 75 400 132 210 6,5
C86.ST.40.1 50 25 40 45 140 90 475 165 380 10,2
C86.ST.50.1 80 27 45 45 145 115 500 192 410 14,5

A2

C86.AL
Openable snatch block. Aluminium sheave mounted on ball bearings.
Aluminium frame with openable side. Standard steel hook attachment.
PULLEY BLOCKS

OPTIONAL DEVICES
eye attachment A2

Working Max
Dimensions (mm) Weight
Load rope
kN Ø A B D E F G H kg
C86.AL.6 8 16 16 16 98 72 300 120 160 1,6
C86.AL.12 12 20 18 25 130 72 320 155 180 2,8

A2

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 80 B150-1 • rev. 05:17 EN

SNATCH-BLOCKS

C87
Snatch block for wire ropes. Galvanised steel frame with 2, 3 or 5 steel sheaves
mounted on waterproof ball bearings. The snatch blocks are supplied in pairs.

OPTIONAL DEVICES
01 Shackle, swivel joint and wire rope (length and diameter of the rope to be
specified)
02 Anti-fleeting bars.

Working Weight
Sheaves Dimensions (mm)
load per pair
no. D min rope Ø L max A B kN kg
C87.2.025 2 160 8 380 22 22 30 20
C87.3.035 3 160 8 450 25 22 50 27
C87.5.055 5 160 8 500 29 22 80 45
C87.2.030 2 180 9 370 22 22 38 25
C87.3.045 3 180 9 430 25 22 60 30
C87.5.070 5 180 9 470 29 22 100 45

C88
Tackle block for high voltage lines. Steel frame with 4 or 6 steel sheaves mounted on
waterproofed ball bearings. Supplied in pairs.

OPTIONAL DEVICES
01 Aluminium sheaves.

PULLEY BLOCKS
Working Weight
Sheaves Dimensions (mm)
load per pair
no. D min rope Ø L max A B E min kN kg
C88.4.025 4 120 6 500 23 23 11 40 25
C88.4.045 4 160 8 650 25 23 11 73 45
C88.6.065 6 160 8 680 27 35 11 105 70
C88.6.095 6 200 10 800 36 45 12 150 100
c88.6.120 6 240 12 940 38 48 14 200 130

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 81 B155-0 • rev. 07:17 EN

 RUNNING BOARDS

F153..F
F153.2...F Fixed type running board for 2-bundle conductor, fit for connecting the pul-
ling rope to 2 conductors. The running board is made up of:
• 1 swivel joint for the pulling rope
• 2 swivel joints for the conductors

F153.3...F Fixed type running board for 3-bundle conductors, fit for connecting the
pulling rope to 3 conductors. The running board is made up of:
• 1 swivel joint for the pulling rope
• 3 swivel joints for the conductors

Cond. Dimensions (mm) Joints (model) Rope for conductors Working Load Weight
(a) A B C (b) (c) Ø mm length m kN kg
F153.2.3.F 2 100 130 250 F250.R.16.1 F250.R.18.1 12 3 65 70
F153.2.1.F 2 146 160 360 F250.R.24.1 F250.R.18.1 16 3,5 95 135
F153.2.2.F 2 174 170 410 F250.R.24.1 F250.R.18.1 16 3,5 95 150
F153.3.3.F 3 100 130 250 F250.R.16.1 F250.R.18.1 12 3 65 75
F153.3.1.F 3 146 160 360 F250.R.24.1 F250.R.18.1 18 3,5 95 150
F153.3.2.F 3 174 170 410 F250.R.24.1 F250.R.18.1 18 3,5 95 170
(a) number of conductors – (b) joint for pulling rope – (c) joint for conductors

F153
F153.2 Balanced type running board for 2-bundle conductors, fit for connecting
the pulling rope to 2 conductors.
The running board is made up of:
• 1 sheave with balancing counterweights
• 1 swivel joint for the pulling rope
• 2 swivel joints for the conductors
PULLEY BLOCKS

• 1 length of antitwisting steel rope for balancing the conductors

F153.3 Balanced type running board for 3-bundle conductors, fit for connecting
the pulling rope to 3 conductors.
The running board is made up of:
• 1 sheave with balancing counterweights
• 1 swivel joint for the pulling rope
• 3 swivel joints for the conductors
• 2 lengths of antitwisting steel rope: 1 for the lateral conductors and 1 for the
central conductor

Cond. Dimensions (mm) Joints (model) Rope for conductors Working Load Weight
(a) A B C (b) (c) Ø mm (e) m (f) m kN kg
F153.2.1 2 146 160 360 F250.R.24.1 F250.R.16.1 16 30 — 95 140
F153.2.2 2 174 170 410 F250.R.24.1 F250.R.16.1 16 30 — 95 155
F153.2.6 2 100 125 245 F250.R.18.1 F250.R.13.1 12 15 — 65 85
F153.3.1 3 146 160 360 F250.R.24.1 F250.R.18.1 18 30 15 95 155
F153.3.2 3 174 170 410 F250.R.24.1 F250.R.18.1 18 30 15 95 175
F153.3.6 3 100 125 245 F250.R.18.1 F250.R.13.1 12 15 7 65 90
(a) number of conductors – (b) swivel joint for pulling rope – (c) joint for conductors – (e) rope length for external conductors - (f) rope length for central conductor

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 82 C211-0 • rev. 00:17 EN

RUNNING BOARDS

F154...F
Fixed type running board for 4-bundle conductors fit for connecting the pulling rope to
4 conductors. The running board is made up of:
• 1 swivel joint for the pulling rope
• 4 swivel joints for the conductors

Cond. Dimensions (mm) Thickness Joints (model) Rope for conductors Working Load Weight
(a) A B C mm (b) (c) Ø mm length m kN kg
F154.4.1.F 4 100 290 540 160 F250.R.24.1 F250.R.18.1 18 3,5 95 190
F154.4.2.F 4 130 340 640 160 F250.R.24.1 F250.R.18.1 18 3,5 95 210
F154.4.5.F 4 148 296 640 160 F250.R.24.1 F250.R.18.1 18 3,5 95 210
F154.4.6.F 4 178 356 760 160 F250.R.24.1 F250.R.18.1 18 3,5 95 230
F154.4.8.F 4 130 340 640 180 F250.R.28.1 F250.R.24.1 18 3,5 250 265
(a) number of conductors – (b) joint for pulling rope – (c) joint for conductors

F154
Balanced type running board for 4-bundle conductors fit for connecting
the pulling rope to 4 conductors.
The running board is made up of:
• 3 sheaves with balancing counterweights
• 1 swivel joint for the pulling rope
• 4 swivel joints for the conductors

PULLEY BLOCKS
• 2 lengths of antitwisting steel rope for balaning the conductors

Cond. Dimensions (mm) Joints (model) Rope for conductors Working Load Weight
(a) A B C D (b) (c) Ø mm (e) m (f) m kN kg
F154.4.1 4 290 100 540 160 F250.R.24.1 F250.R.18.1 18 30 30 95 200
F154.4.2 4 340 130 640 160 F250.R.24.1 F250.R.18.1 18 30 30 95 220
F154.4.5 4 296 148 640 160 F250.R.24.1 F250.R.18.1 18 30 30 95 220
F154.4.6 4 356 178 760 160 F250.R.24.1 F250.R.18.1 18 30 30 95 240
F154.4.8 4 340 130 640 180 F250.R.28.1 F250.R.24.1 18 30 30 250 340
(a) number of conductors – (b) swivel joint for pulling rope – (c) joint for conductors – (e) rope length for external conductors - (f) rope length for central conductor

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 83 C213-0 • rev. 00:17 EN

 RUNNING BOARDS

F154.6...F
Fixed type running board for 6-bundle conductors fit for connecting the pulling rope to
6 conductors. The running board is made up of:
• 1 swivel joint for the pulling rope
• 6 swivel joints for the conductors

Dimensions (mm) Joints (model) Rope for conductors Working Load Weight
A B C D (a) (b) Ø mm length m kN kg
F154.6.1.F 290 100 820 175 F250.R.28.1 F250.R.18.1 18 3 150 320
F154.6.2.F 340 125 1000 175 F250.R.28.1 F250.R.18.1 18 3 150 350
(a) joint for pulling rope – (b) joints for conductors
Running board fit for pulley mod. F189

F154.6
Balanced type running board for 6-bundle conductors fit for
connecting the pulling rope to 6 conductors.
The running board is made up of:
• 5 sheaves with balancing counterweights
• 1 swivel joint for the pulling rope
• 6 swivel joints for the conductors
• 3 lengths of antitwisting steel rope for balancing the conductors
PULLEY BLOCKS

Dimensions (mm) Joints (model) Rope for conductors Working Load Weight
A B C D (a) (b) Ø mm length m kN kg
F154.6.1 290 100 820 175 F250.R.28.1 F250.R.18.1 18 3 150 320
F154.6.2 340 125 1000 175 F250.R.28.1 F250.R.18.1 18 3 150 350
(a) joint for pulling rope – (b) joints for conductors
Running board fit for pulley mod. F189

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 84 C215-0 • rev. 05:17 EN

STRINGING EQUIPMENT

F166
Joint protector made up of two galvanised steel shells. The ends are shaped to host
the rubber protections. It is fit to limit the bending radius of the conductor during the
passage in the running out blocks.
Note: in the purchase order, please specify the following dimensions:
L = length of the joint after compression
d = conductor diameter
ch = hexagon dimension of the joint after compression

pulleys joint
conductor L max Hexagon
with protector W.L Weight
Ød (¹) Ch max
groove ext ØE
mm mm mm mm mm kN kg
F166.40.1 54/60 50 18 700 28 2,5 - 5 10
F166.60.1 68 57 28 995 40 4 - 6,5 16
F166.65.1* 95 68 32 1080 53 2-5 18
F166.92.1* 95 89 50 1240 60 6 - 6,5 32

F198
* special - (¹)different lengths on request

Antitwisting counterweight fit for stringing overhead fiber optic cables (OPGW).
The counterweight allows to avoid the cable twisting during the passage in the running
out blocks. Its shape is designed for passing in the grooves of the running out blocks
without damaging the cable. A pair of nylon liners prevents damages to the cable.
Supplied in metallic case.
Note: counterweights F198 must always be used in pairs.
In the purchase order, please specify the OPGW diameter.
Attention: minimum distance between the two counterweights approximately 3m.
Conductor Fit for running out block
Dimensions (mm) Weigth (¹)
ØC ØE groove width
ØD A(²) B kg mm mm mm
F198.50 50 1000 35 22 9 - 17 350/500 60/68
F198.60 64 1300 50 38 14 - 23 500/800 68
F198.88 80 1800 60 46 23 - 30 650/800 95
(¹) weight of a pair - (²) indicative length

F198.1

PULLEY BLOCKS
Antitwisting counterweight fit for stringing overhead fiber optic cables (OPGW). The
counterweight allows to prevent the cable from twisting during the passage in the
running out blocks. Its shape is designed for passing in the grooves of the running out
blocks without damaging the cable. To be matched with a pulling stocking (not supplied
- to be quoted on request).

OPTIONAL DEVICES
01.95 Clamp for OPGW conductor to be applied at the head of the counterweight,
instead of the pulling stocking. Running out block groove width = 95 mm.
Note: Specify the diameter of the conductor OPGW.
01.68 Clamp for OPGW conductor to be applied at the head of the counterweight,
instead of the pulling stocking. Running out block groove width = 68 mm.
Opt. 01.95
Note: Specify the diameter of the conductor OPGW.
Opt. 01.68

Dimensions (mm) Weight W.L. Ø Running out block

L R kg kN mm
F198.1.65 3900 325 60 10 350 / 500 / 650
F198.1.100 4300 500 63 10 800 / 1000

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 85 C220-2 • rev. 00:19 EN

 PULLING ROBOT

F405.10.B F405.15.S

Pulling robot made of light aluminium alloy. Moved by two electric Pulling robot made of light aluminium alloy. Moved by two electric mo-
motors that control two aluminium wheels lined with Vulkollan. The tors that control two aluminium wheels lined with Vulkollan. The motors
motors are powered by an interchangeable and rechargeable battery. are powered by an electric power unit with gasoline engine. Device for
Device for unlocking and recovering the robot in case of stop while unlocking and recovering the robot in case of stop while working. Com-
working. Complete with radio remote control. The robot can ride any plete with radio remote control.The robot can ride any rope/conductor.
rope/conductor. The lower wheels permit to overpass obstacles, like The lower wheels permit to overpass obstacles, like conductor joints.
conductor joints. Supplied in metallic box (0,90 x 0,60 x 0,80 m). Supplied in metallic box (1,00 x 0,60 x 0,90 m). In case of failure on the
In case of failure on the electric system, the robot can be recovered electric system, the robot can be recovered and pulled by cable.
and pulled by cable.
OPTIONAL
OPTIONAL 01 Charger for the motors battery complete with 220/230 V
01 Charger for the motors battery complete with 220/230 V trasformer.
trasformer. ENGINE OF THE POWER UNIT
02 Extra battery.
Feeding gasoline
Electric power unit 12 V
Autonomy 4 hours
Power 1,8 hp
Cooling system air

Max pull Max Min-Max Max Span Dimensions Electric

PULLEY BLOCKS

Pull speed Total weigth

force slope Ø conduc. joint Ø (LxWxH) system
max
kN mm mm m kg
m/min
F405.10.B 1 20° 20 10/46 60 0,80x0,50x0,70 88 (robot 58 kg - n.2 battery 30 kg) 24 V
F405.15.S 1,5 20° 20 10/46 60 0,90x0,60x0,80 67 (robot 52 kg - engine 5 kg) 12 V

RADIO-CONTROL RADIO-CONTROL
Radiocontrol with forward/backward and stop control buttons, max distance 500 m.
Complete with receiving unit, battery charger and 2 extractable and rechargeable
batteries. Protection IP67.
Fit for F405.10.B and F405.15.S

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 86 B424-1 • rev. 03:20 EN

EQUIPMENT FOR REPLACING CONDUCTORS

F183.2.70 Cradle block designed for replacing the existing ground wire (GW) with optical ground
wire (OPGW). Made of two galvanized steel half-frames linked by a ring with swivel
plate. Each half-frame is complete with:
• one grooved nylon wheel mounted on ball bearings
• three nylon plates to protect the OPGW cable
• easy-to-open side
The frame is designed to avoid the contact between cable and metallic parts.
Working load: 200 daN Groove width: 40 mm
Wheel diameter: 70 mm (external), Dimensions: 390x65x118 mm
40 mm (bottom groove) Weight: 2,00 kg
OPTIONAL
01 – Metallic box for 50 blocks (dimensions 800x600x600 mm)
F183.2.70.A – complete with ring and rope block device.
F183.2.70.A F183.2.70.B F183.2.70.B – complete with lateral rope block clamp.

F183.3.70
F183.2.70.C – complete with upper rope block clamp.

Cradle block designed for replacing the existing cables, with head clamp for ropes
diameter from 10 to 20 mm.
Two nylon wheels mounted on ball-bearings and aluminium frame with protective
nylon plate.
Working load: 200 daN
Dimensions: 364x99x160 m
Weight: 1,2 kg
OPTIONAL
01 – Metallic box for 50 blocks (dimensions 600x600x600 mm)

F183.4.70
Cradle block designed for the replacing existing cables, with clamp for ropes diameter
from 10 to 20 mm. Two nylon wheels and aluminium frame.
Working load: 150 daN
Dimensions: 360x99x150 mm
Weight: 1,1 kg

OPTIONAL

PULLEY BLOCKS
01 – Metallic box for 50 blocks (dimensions 600x600x600 mm)

F405.15.FR
Braking device for cradle blocks. Positioned behind the cradles, to keep the distance
between the cradles. Aluminium frame and aluminium, rubber wheels mounted on
ball-bearings.
Working load: 150 daN
Weight: 4 kg
OPTIONAL
01 – Plastic box (dimensions 600x400x200 mm)

F405.15.RR
Recovering device to hook the robot in case of extreme inclination. Towing system by
rope with detachable counterweights. Aluminium frame and wheels mounted on ball
bearings and galvanised steel counterweights.
Working load: 150 daN
Counterweights: 3 x 8,8 kg each
Weight: 8,3 kg (counterweights excluded)

OPTIONAL
01 – Metallic box (dimensions 600x800x300 mm)

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 87 B410-0 • rev. 09:17 EN

 08
EQUIPMENT

www.omac-italy.it 89
JOINTS FOR ROPES

GF..00
Joint made of high tensile galvanised steel, fit to connect pilot rope lengths and pulling
rope. Designed to pass on the capstan grooves of pullers or puller/tensioners.

Dimensions mm for rope W.L Weight

A H B Ø R Ø mm kN kg
GF.10.00 68 14 36 17 13 10/12 23 0,20
GF.13.00 76 17 37 21 15 13/14 37 0,30
GF.16.00 96 19 50 22 20 16 53 0,60
GF.18.00 110 25 56 24 22 18/20 73 0,90
GF.24.00 125 26,5 60 28 24 22/24 120 1,30
GF.26.00 168 30 72 38 30 26/28 250 3,00
GF.32.00 178 35 80 44 34 28/32 280 3,50

F250.R
Swivel joint for ropes and conductors. Designed to release the torsion efforts during the
pulling operations. Made of galvanised steel, complete with an axial bearing for an easy
rotation.

Dimensions mm for rope W.L Weight

A B C Ø mm kN kg
F250.R.06.1 60 18 8,5 7 4 0,10
F250.R.08.1 96 24 12 9 8 0,22
F250.R.12.1 137 32 13 14 25 0,50

EQUIPMENT
F250.R.13.1 152 39 17 16 40 1,00
F250.R.16.1 177 45 20 18 63 1,20
F250.R.18.1 182 52 22 22 80 2,60
F250.R.24.1 228 60 25 26 130 3,30
F250.R.28.1 310 80 36 32 260 7,00
F250.R.32.1 322 77 31 38 280 8,50

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 91 C110-2 • rev. 01:18 EN

 CABLE PULLING STOCKING GRIPS

C06
Head stocking-grips for pulling overhead conductors.

Identify Useful Total

Conductor Ø W.L Weight
colour (L1) length (L) length
mm mm mm kN kg
C06.S.1 8-17 YELLOW 1100 1400 12 0,70
C06.S.2 17-29 RED 1350 1700 28 1,30
C06.S.3 29-38 GREEN 1470 1900 43 2,10
C06.S.4 38-50 BLACK 1810 2270 60 2,70

C07
Double-head stocking-grip for temporary junction of overhead conductors

Identify Useful Total

Conductor Ø W.L Weight
colour (L1) length (L) length
mm mm mm kN kg
C07.S.1 8-17 YELLOW 1100 2680 12 1,15
C07.S.2 17-29 RED 1360 3240 28 2,30
C07.S.3 29-38 GREEN 1470 3540 43 3,60
C07.S.4 38-50 BLACK 1820 4240 60 4,80
EQUIPMENT

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 92 C120-1 • rev. 08:17 EN

SELF-GRIPPING CLAMPS

C27.11
Self-gripping clamps fit for:
• Conductor ACSR, AAAC, ACSS and copper cable
Diameter: Ø 5-28 mm
Maximum safety load: 20 kN
Jaws length: 120 mm
Weight: 1,9 kg
Dimensions: 320 x 180 mm

C30.11
Self-gripping clamps fit for:
• Conductor ACSR, AAAC, ACSS and copper cable
Diameter: Ø 18-35 mm
Maximum safety load: 30 kN
Jaws length: 120 mm
Weight: 2,4 kg
Dimensions: 320 x 180 mm

C32.10
Self-gripping clamps fit for:
• Conductor ACSR, AAAC, ACSS and copper cable
Diameter: Ø 18-36 mm
Maximum safety load: 50 kN
Jaws length: 180 mm
Weight: 4,7 kg
Dimensions: 380 x 200 mm

C33.10
Self-gripping clamps fit for:
• Conductor ACSR, AAAC, ACSS and copper cable
Diameter: Ø 28-46 mm
Maximum safety load: 60 kN
Jaws length: 220 mm
Weight: 7,0 kg
Dimensions: 420 x 220 mm

3105.1
Self-gripping clamps fit for:
• aluminium, ACSR and ACCC, copper conductor: 8-35,2 mm
• steel conductor and ground wire: 8-22 mm
EQUIPMENT
• jaws length: 272 mm
• steel rope: 8-24 mm
Interchangeable liners (type G05) conductor diameter to be confirmed.
Maximum safety load: 75 kN
Minimum breaking load: 225 kN

3112 Weight: 15 kg

Self-gripping clamps fit for:

• Ground wires with optical fiber (OPGW) with external diameter 6-23 mm
• Interchangeable liners (type G12TA)
Maximum safety load: 49 kN
Minimum breaking load: 180 kN
Weight: 7 kg
G12TA Interchangeable liners in adiprene and aluminium, on demand according to
OPGW diameter

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 93 C325-2 • rev. 01:17 EN

 SELF-GRIPPING CLAMPS

C28.10.FS
Self-gripping clamps fit for:
• Guy wire, isolated cable, wire rope and copper cable
Diameter: Ø 5-22 mm
Maximum safety load: 20 kN
Jaws length: 90 mm
Weight: 1,6 kg
Dimensions: 280 x 160 mm

C28.11.FS
Self-gripping clamps fit for:
• Guy wire, isolated cable, wire rope and copper cable
Diameter: Ø 6-22 mm
Maximum safety load: 30 kN
Jaws length: 90 mm
Weight: 1,8 kg
Dimensions: 280 x 160 mm

C28.12.FS
Self-gripping clamps fit for:
• Guy wire, isolated cable, wire rope and copper cable
Diameter: Ø 8-28 mm
Maximum safety load: 40 kN
Jaws length: 140 mm
Weight: 3,5 kg
Dimensions: 340 x 200 mm

C26.10.ABC
Self-gripping clamps fit for:
Cable: 2 x 16 mm²/ 2 x 50 mm²
4 x 16 mm²/ 4 x 35 mm²
Maximum safety load: 3,5 kN
Dimensions: 250 x 150 mm
Weight: 0,6 kg
Aluminium jaws lined with high grip material (jaws length 80 mm)

C26.11.ABC
Self-gripping clamps fit for:
Cable: 4 x 25 mm² and 4 x 95 mm²
EQUIPMENT

Maximum safety load: 10 kN

Dimensions: 300 x 150 mm
Weight: 2,4 kg
Aluminium jaws lined with high grip material (jaws length 160 mm)

C26.12.ABC
Self-gripping clamps fit for:
Cable: 4 x 95 mm² and 4 x 150 mm²
Maximum safety load: 18 kN
Dimensions: 320 x 160 mm
Weight: 2,6 kg
Aluminium jaws lined with high grip material (jaws length 180 mm)

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 94 C327-2 • rev. 01:17 EN

COME-ALONG CLAMPS

C24
Multi-unit come-along clamp fit for pulling and anchoring overhead conductors and
steel wire ropes. Made of steel elements, with aluminium liners for conductors.
On request: bronze liners for wire ropes.
Note: specify diameter and type of conductor or rope.

OPTIONAL DEVICES
01 Bronze liners fit for anti twisting steel wire ropes (rope diameter to be specified).

Dimensions For ropes For conductors up to

Elements Working load Weight
LxWxH up to diameter diameter
mm mm mm kN kg
C24.4 4 520 x 105 x 70 14 16 16 6
C24.5 5 680 x 130 x 70 16 18 20 12
C24.6 6 740 x 130 x 70 20 22 25 14
C24.7 7 800 x 130 x 70 24 26 28 16
C24.8 8 860 x 130 x 70 26 30 34 18

C24.1
Radial come-along clamp for aluminium conductors.
Made of electrowelded and galvanised steel elements, with aluminium liners.
On request: bronze liners for wire ropes.
Note: specify diameter and type of conductor or rope.

OPTIONAL DEVICES
01 Bronze liners fit for anti twisting steel wire ropes (rope diameter to be specified).

EQUIPMENT
Dimensions For ropes For conductors up to
Elements Working load Weight
LxWxH up to diameter diameter
mm mm mm kN kg
C24.1.4 4 450 x 160 x 180 20 15/26 40 18
C24.1.6 6 520 x 160 x 180 24 20/35 60 27
C24.1.7 7 630 x 160 x 180 28 20/38 66 32
C24.1.8 8 690 x 160 x 180 30 30/40 80 37
C24.1.10 10 820 x 160 x 180 34 30/45 100 42
C24.1.12 12 950 x 160 x 180 36 30/48 120 49
C24.1.14 14 1080 x 160 x 180 40 30/50 150 65
C24.1.16 16 1200 x 160 x 180 45 40/52 165 77
C24.1.20 20 1450 x 180 x 220 50 40/60 200 110

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 95 C320-0 • rev. 13:17 EN

 HYDRAULIC PRESSES

F39
Steel hydraulic presses. Fed by a separate power pack or hand pump.
• Short pressing cycle.
• Maximum flexibility: each press can be used with power unit or hand pump.
• Adjustable pressure-control valve for die closing/opening, with manometer.
• Quick couplings for flexible hoses connection.
• Die-holder for semicircular dies.
• Base with handles.
• Press body can be rotate by 360°.
• Metallic box with handles for transport.

OPTIONAL DEVICES
701 Trailer for press and control hydraulic unit mod CIS.01 with rigid axle and
drawbar for towing in the job-site.
026 Frame with PVC-cover for opt.701.
027 Metallic coverage for opt.701.

Dimensions
Max compressionforce Max pressure Max hexagon Max stroke Weight
LxWxH
kN ton bar mm mm mm kg
F39.70.1 700 70 700 52 32 500x210x400 47
F39.100.1 1000 100 700 65 35 500x230x400 49
F39.120.1 1200 120 700 65 40 600x260x450 51
F39.180.1 1800 180 700 90 40 600x450x700 140

Dies and straighteners for presses F39

Press Joint Die

Compression type Dimensions Weight
material hexagonal round tallurit mm kg
steel-copper F39.2585 F39.2587
F39.70.1 Ø 90 x 76 2
aluminum F39.2586 F39.2588 F39.4949A
EQUIPMENT

F39.100.1 steel-copper F39.2570 F39.2558

Ø 90 x 80 2
F39.120.1 aluminum F39.2566 F39.2554 F39.4648T
Die for joints
steel-copper F39.2571 F39.2559 Ø 90 x 80 or 2
F39.180.1
aluminum F39.2567 F39.2555 F39.4648G Ø 130 x 120 6

Press Joint-straighteners
Code Dimensions Weight
mm kg
F39.70.1 F39.2582 Ø 90 x 170 7
F39.100.1
Joint-straightener F39.2573 Ø 90 x 230 11
F39.120.1
F39.180.1 F39.2575 Ø 90 x 230 - Ø 130 x 300 11 - 31
hexagonal key
dimension (CH)
to be specified

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 96 C530-0 • rev. 18:18 EN

EQUIPMENT FOR HYDRAULIC PRESSES

CID CIS CIE

Hydraulic power pack for feeding the hydraulic presses.
• Base and protection frame.
• Metallic box with handles for transport.
• 2-stage pump for a faster return of the press cylinder (except model CIS.02
single-stage).
• Quick couplings for connecting the flexible hoses.
• Exhaust valve.
• CIS.02 model equipped with heat exchanger for cooling the hydraulic oil.

CIS 01
OPTIONAL DEVICES
01 Control valve for presses mounted on power unit instead of the press.
02 Single phase electric motor 220 V (for model CIE.01).
03 Oil tank with capacity 25 lt (only for model CIS.01 and CID.01).
04 Increased capacity of the pump at 8 - 2 liters/minute.
05 Base frame with wheels and handles for towing and lifting.

CIS 02

Dimensions
Engine Power Max pressure Max flow Tank capacity Weight
LxWxH
kW bar l/min l mm kg
CIS.01 gasoline 3,5 700 4,7 - 1,8 10 530 x 340 x 370 51
CIS.02 gasoline 3,5 700 3 10 520 x 400 x 400 42
CID.01 diesel 5 700 4,7 – 1,8 10 550 x 400 x 450 60
CIE.01 three phase Electric 380V 2,2 700 2,7 - 0,8 10 530 x 340 x 370 46

PL Hand pump for presses.

• 2-stage pump for a faster return of the press cylinder.
• Light-alloy construction.
• Quick couplings for connecting the flexible hoses.
Displacement Tank Dimensions
Max pressure Weight
1st stage 2nd stage capacity lxwxh
bar cm³ cm³ l mm kg
PL.262 700 13 3 2,5 565 x 125 x 170 8

EQUIPMENT

TF GR
Kit of flexible hoses with quick couplings.
Quick couplings for connecting two flexible
Lengths: 3, 6, 10, 15, 20, 30, 40, 50, 60 m
hoses.
(specify the length needed).

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 97 C531-0 • rev. 10:17 EN

 RUNNING EARTHING DEVICES

C35
Grounding device to be used while stringing overhead conductors or pulling ropes.
Aluminium alloy sheaves with bushes grant a good sliding and electric continuity even
on junction points. Contrast spring for a safe and continuous contact on conductors with
junction clamp. Supplied with:
• Copper cable section 50 mm² lined with high-insulating protection, length 6 m.
• Brass clamp, clamping capacity 0 - 40 mm.
• Metallic box for storage.

OPTIONAL DEVICES
01 Steel-wheels fit for anti-twisting steel rope (only for C35.2).

C35.1

C35.2

Dimensions Metallic box

Short-circuit current Fit for conductor Weight Metallic box weight
AxBxCxD dimensions
mm mm kg mm kg
C35.1 10 kA for 0,4 second Ø 3 - 40 500 x 420 x 180 x 85 7 600 x 600 x 250 7,5
C35.2 10 kA for 0,4 second Ø 10 - 60 430 x 370 x 150 x 65 6,5 500 x 500 x 200 14
EQUIPMENT

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 98 C230-0 • rev. 16:17 EN

GROUNDING EQUIPMENT

C37.AT
Short circuiting and grounding equipment for H.V. overhead lines 400-500 kV.
Certified in conformity with the International Standard CEI EN 61230 (IEC 1230).

C37.AT.50 with cable section 50 mm2 - Icc: 12,7 kA eff / 1 s.

C37.AT.70 with cable section 70 mm2 - Icc: 18,6 kA eff / 1 s.
C37.AT.95 with cable section 95 mm2 - Icc: 25,2 kA eff / 1 s.
C37.AT.150 with cable section 120 mm2 - Icc: 30,7 kA eff / 1 s.

• 3 screw type contact clamps made by light alloy.

Clamping capacity: conductors 5-60 mm diameter. Suitable for use on oxidized
conductors. Lower ring for fastening and unfastening.
• 3 extraflexible electrolytic copper cables covered by transparent plastic sheath
(length to be specified on demand).
• 3 ground clamps made by press forged brass. Clamping capacity: round conductors
and bars up to 33 mm.
• Metallic case.
• Insulating fiberglass rod made by synthetic resin reinforced by fiberglass, in two
or three elements. Length 1,5 or 2 m each, with quick coupler and top hook for
maneuvering the clamps. Total length to be specified on demand.
• Heavy fabric bag for the insulating rod.

C37.MT
Short circuiting and grounding equipment for M.V. overhead bare conductors.
Certified in conformity with the International Standard CEI EN 61230 (IEC 1230).

C37.MT.25 short circuit cables section 25 mm2 - short circuit test 5,6 kA / 1 s.
C37.MT.35 short circuit cables section 35 mm2 - short circuit test 8,0 kA / 1 s.

• 3 light alloy contact clamps with automatic tightening.

Clamping capacity: conductors 3-20 mm diameter. Tang suitable for fitting on
clamp holder head.
• Light alloy clamp holder head, complete of steel recover hook and threaded tang
for screwing on the head of the insulating rod.
•
EQUIPMENT
2 short circuit extraflexible electrolytic copper cables, covered by transparent
plastic sheath, length 2,5 m (different lengths on demand).
• Ground cable, characteristics as above, section 16 mm2, length 16 m (different
lengths on demand), rolled up on cable coiler.
• Earthing rod.
• Insulating fiberglass rod made by epoxy resin reinforced by
fiberglass. Total length 3 m in two elements each length 1,5 m, with fast joint and
threaded M10 attack suitable for fitting on clamp holder head.
• Metallic case for the equipment, heavy fabric bag for the rod.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 99 C245-0 • rev. 04:17 EN

 LIFTING EQUIPMENT

C55
Chain lever hoist (pull-lift) made of steel. Fit for lifting and tensioning, with high
strength chain. Swivelling hooks with safe-lock device.
Run of the hook: 1,5 m (variable on demand).
Load capacity: 750, 1500, 3000, 6000 and 9000 daN.

Force on Dimensions
Handle Chain Chain Net
Capacity handle at width x
length length falls weight
max load thick
kN kN mm m mm kg
C55.075.1 7,5 0,14 280 3 1 148 x 136 7
C55.150.1 15 0,22 410 3 1 172 x 160 11
C55.300.1 30 0,32 410 3 1 200 x 180 21
C55.600.1 60 0,34 410 3 2 200 x 235 31
C55.900.1 90 0,36 410 3 3 200 x 320 46

C60
Rope hoist (TIRFOR). Fit for lifting and tensioning, with endless run.

Weight Overall Rope Handle

Capacity
(without rope) dimensions diameter length
kN kg mm mm mm
C60.08.1 8 6 428 x 65 x 260 8 800
C60.16.1 16 11 545 x 97 x 280 11,3 1200
EQUIPMENT

C60.32.1 32 22 660 x 116 x 320 16,3 1200

Fit for Breaking

Diameter Mass Lengths
hoist load
mm kN kg/m
C60.C.08.1 C60.08 8 48 0,25 10m, 20m, 30m, 40m,
C60.C.16.1 C60.16 11,3 96 0,55 different lengths on
C60.C.32.1 C60.32 16,3 192 0,98 demand
C60.C

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 100 C440-2 • rev. 11:18 EN

CUTTERS

C15
Hand operated hydraulic cutters fit for cutting copper, aluminum, aldrey, steel and
steel-aluminum ropes and conductors.
• Two speeds action: high speed to quickly approach the blade to the
conductor and low speed for cutting.
• Blades made of high strength special steel.
• Openable head, with quick locking device, to cut running cables.
• The head can rotate 180° to let the operator work in the most comfortable position.
• Safety valve that automatically bypasses oil when reaching the max
pressure.
• Release device that can be operated at any stage of the operation.
• C15.40.1.L pair of spare blades.

C15.25 C15.40.1
Max cutting diameter Max cutting diameter
Material Material
mm mm
aluminium-steel 25 aluminium-steel 40
aluminium 25 aluminium 40
copper 25 copper 40
steel-ropes 18 steel-ropes 19

Length Weight Length Weight

382 3,2 683 6,8

C12 / C13
Ratchet cutters fit for conductors, cables and shield wires. The chain ratchet allows to

EQUIPMENT
cut the wire progressively with minimum effort. Insulated handles tested at 20.000 V.

C12 Cutter for ACSR and ACAR conductors. Cutting capacity up to Ø31 mm. Length 750
mm. C12.L pair of spare blades.

C13 Cutter for electric and telephonic cables. Cutting capacity up to Ø31 mm Not fit for
ACSC conductors. Length 700 mm. C13.L pair of spare blades.

C13.1 Cutter for shield wires. Cutting capacity up to Ø 11 mm.

Length 720 mm. C13.1.L pair of spare blades.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 101 C715-1 • rev. 04:18 EN

 09
LIGHT ALLOY EQUIPMENT

www.omac-italy.it 103
OVER HEAD LINES BICYCLES

C175
Bicycle for single, twin, 3- and 4-bundle conductor lines.
Nylon wheels mounted on ball-bearings.
Fit for moving on conductors. Equipped with negative disc brake and a safety brake
clamping the conductor, safety belt, and metercounter. Max slope percentage 25%.
In models C175.2 C175.3 and C175.4, the wheel-distance is adjustable up to 500 mm.
On demand:
• 01. Bag for spacers.
• 02. Electric motor with battery, speed 15 m/min, 3-hours autonomy circa, weight
19 kg (¹).
• 03. Wheel-distance adjustable up to 600 mm (¹).
• 04. Gasoline engine 2 hp, speed 0 to 20 m/min max, weight 15 kg (¹).
• 05. Container for transporting and storing.
(¹) available for mod. C175.2 C175.3 and C175.4

C175.1 C175.2

Capacity Dimensions Weight

kg m kg

C175.1 for single conductor lines 100 1,15 x 0,50 x 1,81 26

C175.2 for twin conductor lines (¹) 100 0,75 x 0,70 x 1,40 34 LIGHT ALLOY

C175.3 for 3-bundle conductor lines (¹) 100 0,70 x 0,60 x 1,40 40

C175.4 for 4-bundle conductor lines (¹) 100 1,60 x 0,70 x 1,50 49

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 105 G110-1 • rev. 08:17 EN

 LINE CARS

C150.11
Single-seat line car fit for single-conductor lines.
Aluminium alloy structure with nylon wheels mounted on ball-bearings.
Parking brake. Nylon band for back support. Foot rest.

FEATURES
Capacity 100 kg
Weight 6,5 kg
02 Aluminium wheels

C155.10
Line car for single-conductor lines. Fit for 1 or 2 linemen.
Aluminium alloy structure with nylon wheels mounted on ball-bearings. Parking brake.
Equipped with metercounter.

FEATURES C155.10.A FEATURES C155.10.B

Fit for 1 person Fit for 2 persons
Length 650 mm Length 1000 mm
Capacity 100 kg Capacity 200 kg
Weight 28 kg Weight 38 kg

OPTIONAL DEVICES

709 Device for car angle adjustment (only for mod. C155.10.B).
02 Aluminium wheels

OPT.709

C155.11 Line car for single-conductor electric lines. Fit for 2 linemen.
Aluminium alloy structure with nylon wheels mounted on ball-bearings.
Parking brake. Equipped with metercounter.
LIGHT ALLOY

FEATURES
Capacity 200 kg
Weight 82 kg
02 Aluminium wheels

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 106 G111-1 • rev. 01:18 EN

LINE CARS

C155.A.2
Line-car for twin conductor lines (2 cond.). Made of light alloy structure with nylon
wheels mounted on ball-bearings. Stationary brake and metercounter.
Also available for 3-bundle lines (3 conductors): mod. C155.A.3

FEATURES
Adjustable distance between wheels 400 to 500 mm.
Capacity 100 kg
Weight 34 kg

OPTIONAL DEVICES
02 Aluminium wheels

C155.AM.2
Motorized line-car for twin conductor lines (2 cond.). Made of light alloy structure with
wulcolan wheels mounted on ball-bearings. Transmission axle with high grip rubber
wheels. Stationary brake and metercounter.
Also available for 3-bundle lines (3 cond.): mod. C155.AM.3

FEATURES
Adjustable distance between wheels 400 to 500 mm
Gasoline engine 2,4 hp, 2 strokes, 48 cc
Speed 0-20 m/min
Max inclination 25%
Mechanical transmission with idle device
Capacity 100 kg
Weight 56 kg
707 - Negative disk brake, with manual opening
LIGHT ALLOY

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 107 G120-2 • rev. 01:17 EN

 LINE CARS

C155.B
Line-car for 2 linemen, fit for 2-, 3- or 4-bundle conductor lines.
Made of light alloy structure with nylon wheels mounted on ball-bearings.
Stationary brake and metercounter.
Max load: 200 daN
FEATURES
Capacity 200 kg

OPTIONAL DEVICES
02 Aluminium wheels

C155.B.2
n. of conductors of the line: 2 conductors 3 conductors 4 conductors
height ‘B’ B = 1200 mm B = 1550 mm B = 1550 mm
C155.B.2 C155.B.3 C155.B.4
line car without engine
weight 45 kg weight 50 kg weight 55 kg

C155.B.4
Stationary brake Metercounter

C155.BM
Motorized line-car for 2 linemen, fit for 2-, 3- or 4-bundle conductor lines.
Made of light alloy structure with nylon wheels mounted on ball-bearings.
Transmission axle with high grip rubber wheels. Stationary brake and metercounter.
FEATURES
Capcity 200 kg
Gasoline engine 5 hp, 48 cc with hydraulic power unit
Translation speed 0-40 m/min
Max slope 40%.
Removable engine and hydraulic transmission group.

OPTIONAL DEVICES
02 Aluminium wheels

n. of conductors of the line: 2 conductors 3 conductors 4 conductors

height ‘B’ B = 1200 mm B = 1550 mm B = 1550 mm
C155.BM.2 C155.BM.3 C155.BM.4
line car with engine
weight 115 kg weight 125 kg weight 140 kg
LIGHT ALLOY

note:the dimensions E are adjustable 400-457-500-600 mm. Line cars with different dimensions can be produced on request.

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 108 G121-0 • rev. 08:17 EN

LINE CARS

C155.C
Line-car for 2 linemen, fit for 2-, 3- or 4-bundle conductor lines.

• Light aluminium-alloy structure welded TIG-system.

• Four openable arms for wheels, fit for passing obstacles.
• Nylon wheels mounted on ball-bearings.
• Parking brake acting on the conductor.
• Metercounter.
• Service platform.
• Fit for 2 operators.

OPTIONAL DEVICES
01 Nylon wheels mounted on bearings.
02 Aluminium wheels
03 Arms for wheels openable with horizontal rotation.

Line type Capacity Dimensions Weight

kg A A1 B B1 C C1 D E kg
C155.C.2 2 cond. 250 2070 1900 1270 950 1570 1390 865 400-500-600 87
C155.C.3 3 cond. 250 2070 1900 1270 950 1570 1390 865 400-500-600 90
C155.C.4 4 cond. 250 2070 1900 1270 950 1570 1390 865 400-500-600 92

LIGHT ALLOY

C155.C.2 C155.C.3 C155.C.4

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 109 G122-3 • rev. 00:17 EN

 LINE CARS

C155.CM
Motorised line-car for 2 linemen, fit for 2-, 3- or 4-bundle conductor lines.

• Light aluminium-alloy structure welded TIG-system.

• Four openable arms for wheels, fit for passing obstacles.
• Aluminium wheels lined with hi-grip rubber.
• N.2 parking brakes acting on the conductor.
• Metercounter.
• Service platform.
• Fit for 2 operators.
• Hydraulic power pack transmitting the motion to the openable driven wheels.
• Gasoline engine 4 hp.
• Variable speed 0 to 30 m/min in both senses.
• Max slope allowed: 40%.
• Removable power pack.

OPTIONAL DEVICES
03 Arms for wheels openable with horizontal rotation.
04 Earthing device.
05 N.2 negative disk brake manually controlled by 1 lever.
06 N.4 negative disk brake manually controlled by 2 levers.
07 Special structure with load capacity = 400 kg.
NOTE: The weight is 20% higher than the standard version.

Line type Capacity Dimensions (mm) Weight

kg A A1 B B1 C C1 D E kg
C155.CM.2 2 cond. 250 2070 1900 1270 950 1570 1390 865 400-500-600 188
C155.CM.3 3 cond. 250 2070 1900 1270 950 1570 1390 865 400-500-600 197
C155.CM.4 4 cond. 250 2070 1900 1270 950 1570 1390 865 400-500-600 205
LIGHT ALLOY

C155.CM.2 C155.CM.3 C155.CM.4

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 110 G122-2 • rev. 05:17 EN

GIN POLES

C158
Gin poles made of aluminium alloy tubular structure welded with TIG system.
Made of two or more separated sections.
Working Capacity: 1000 to 10000 daN (note: the real capacity depends on the angle of use).
Standard lengths: 6 to 20 m. Available in two versions: with external wire-rope passage
(standard) or internal wire-rope passage (optional).
Complete of swivelling head, base with ground plate and base hook for tower attachment.

OPTIONAL DEVICES
.INT Device for internal wire-rope passage, available for gin poles long 12 m or more.
Ordering code will be: C158....INT (ie: C158.100.062.INT).

P1 P2 P3

Swivelling Swivelling Base plate Swivelling Swivelling

head lower hook (standard) head lower hook
(standard) (standard) (Opt.INT) (Opt.INT)

Capacity (P = Q + T) Sections Weight (¹)

Weight of the
P1 P2 P3 Total length Standard
Number Lengths .INT version base
a=0° a=20° a=20° version
daN daN daN m m kg kg kg
C158.100.062 6 2 3+3 48 58
1000 600 250 10
C158.100.082 8 2 4+4 60 71
C158.150.082 8 2 4+4 66 75
C158.150.102 1500 900 350 10 2 5+5 78 87 10
C158.150.123 12 3 4+4+4 88 97
C158.200.082 8 2 4+4 70 78
C158.200.103 2000 1200 500 10 3 4+2+4 85 93 10
C158.200.123 12 3 4+4+4 95 103
C158.400.102 10 3 5+5 100 115
C158.400.123 12 3 4+4+4 125 145
4000 2500 1000 19
C158.400.163 16 3 5+6+5 170 185
C158.400.204 20 4 5+5+5+5 210 225
C158.500.123 12 3 4+4+4 140 155
C158.500.164 5000 3000 1200 16 4 4+4+4+4 210 225 19
C158.500.204 20 4 5+5+5+5 250 285
C158.700.122 12 2 6+6 (²) 165 205
C158.700.163 16 3 5+6+5 (²) 215 255
7000 4500 1700 29
C158.700.164 16 4 4+4+4+4 215 255
C158.700.204 20 4 5+5+5+5 270 290
LIGHT ALLOY

C158.1000.163 16 3 5+6+5 (²) 245 282

C158.1000.204 10000 7000 2400 20 4 5+5+5+5 298 335 60
C158.1000.244 24 4 6+6+6+6 350 385

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 111 G210-0 • rev. 09:17 EN

 SUSPENSION PLATFORMS

F127
Suspension platform for overhead line works. Aluminium alloy structure.
Made of two or more trapezoidal sections, with central fitting and lateral hooks for anchoring.
Complete with wire ropes and turnbuckles.

OPTIONAL DEVICES
701 Trolley for press, swivelling 360°.
703 Rail for press-trolley.
704 Double-side antifall protection.
704.1 Single-side antifall protection.
On demand, we build suspension platforms with higher capacities or different lengths

Opt.704
and 704.1

Opt.701
and 703

Length of each Working load Total working load Breaking

Total length L Dimensions (mm) Weight (¹)
section L1 P1 P1+P1 (P) load
m m daN daN daN A B C kg
F127.4 4 4 300 600 1800 350 90 400 50
F127.5 5 5 300 600 1800 350 90 400 59
F127.6 (²) 6 6 300 600 1800 350 90 400 64
F127.6.2 6 3+3 300 600 1800 350 90 400 69
F127.8.2 8 4+4 300 600 1800 350 90 450 85
F127.12.2 (²) 12 6+6 300 600 1800 350 90 450 115
F127.14.3 14 5+4+5 300 600 1800 350 90 450 130
F127.16.3 (²) 16 5+6+5 300 600 1800 350 90 450 140
F127.18.3 18 6+6+6 300 600 1800 350 90 450 164
F127.20.4 (²) 20 5+5+5+5 300 600 1800 450 90 550 198
LIGHT ALLOY

(¹) weight including 1 single antifall device opt.704.1; (²) standard length

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 112 G310-0 • rev. 08:17 EN

SUSPENSION LADDERS

C167
Ladder fit for vertical suspension, for working on transmission towers.
Aluminium alloy construction, TIG welded, in one length or more separated sections to
facilitate the transport. Hook complete with steel safety cable.
C167.AS ladder with one guide for antifall device type DA1
C167.AD ladder with two guides for antifall devices type DA1

Working Capacity: 300 daN

OPTIONAL DEVICES
DA1 Antifall device complete with fall absorber, nylon tape and carabiner (part‘A’).
AGM Wider hook opening (300 mm).

version AS
with single antifall device

wider hook
type AGM

antifall device
type DA1

version AD
with double antifall device

Version AS Version AD Total length (L) Sections Weight (vers. AS) Weight (vers. AD)
m No. kg kg
C167.AS.251 C167.AD.251 2,5 1 9,5 11
C167.AS.351 (¹) C167.AD.351 (¹) 3,5 1 12,5 15
C167.AS.451 (¹) C167.AD.451 (¹) 4,5 1 15 18
C167.AS.501 C167.AD.501 5 1 18 21
C167.AS.601 (¹) C167.AD.601 (¹) 6 1 19,5 23
C167.AS.602 (¹) C167.AD.602 (¹) 6 (4+2) 2 21 24
C167.AS.802 C167.AD.802 8 (4+4) 2 30 35
(²) standard length
LIGHT ALLOY

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 113 G510-0 • rev. 10:17 EN

 SUSPENSION LADDERS

C167.F
Suspension ladder fit for vertical or horizontal use.
Aluminum alloy structure welded with TIG system, complete with T profile for anti-fall
device. Interchangeable tower hook made of galvanized steel. The foldable end with
conductor hook allows to use the ladder as a horizontal platform.
also available versione C167.F...S, working load 200 daN.

OPTIONAL DEVICES
01 Conductor hook complete with nylon sheave.
DA1 Antifall device.

FEATURES
Vertical working load 300 daN
Horizontal working load 100 daN
G=220 mm
B=1000 mm
Dimensions:
F=100 mm
A=900 mm

Total length (L) No. of parts Weight

m kg
C167.F.301 3 1 16,5
Opt. 01 C167.F.401 4 1 20
Opt. DA1
C167.F.601 6 1 29,5

C167.G
Suspension ladder fit for vertical and horizontal use.
Aluminum alloy structure welded with TIG system, complete with T profile for anti-fall
device. The two foldable ends, fitted with hooks for tower and for conductor, allow to
use the ladder as a horizontal platform.
also available versione C167.G...S, working load 200 daN.

OPTIONAL DEVICES
01 Conductor hook complete with nylon sheave.
DA1 Antifall device.

FEATURES
Vertical working load 300 daN
Horizontal working load 100 daN
Opt. 01
G=220 mm
B=1000 mm
LIGHT ALLOY

Dimensions:
F=100 mm
Opt. DA1
A=900 mm

Total length (L) No. of parts Weight

m kg
C167.G.301 3,10 1 18,5
C167.G.401 4,10 1 22
C167.G.601 6,20 1 32

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 114 G512-0 • rev. 10:17 EN

ANCHORING LADDERS

C161
Anchoring ladder made of light aluminum alloy, with steps made of antislipping
material and suspension hooks in hot-dip galvanized steel. The ladder is complete with
a fix hook for tower, 220mm opening, and a swivel hook for leaning on the conductor, to
use the ladder in horizontal position. The ladders have trapezoidal shape.

OPTIONAL DEVICES
GG2 Swivel and folding hook for tower, 220mm opening, replacing the fix hook.
01 Hook for conductor complete with nylon pulley.
AS Guide for single antifall device DA1.
DA1 Antifall device.

opt. DA1 opt. 01

opt. GG2

Length of Dimension Min. breaking Max (²) horizontal Max vertical

Total length (L) Weight
each section A load working load working load
m No. mm kN kN kN kg
C161.TP.351 (¹) 3,5 3,5 320 15 3 3 17
C161.TP.401 4,0 4,0 320 15 3 3 20
C161.TP.451(¹) 4,5 4,5 320 15 3 3 22
C161.TP.501 5 5 320 15 3 3 24,5
LIGHT ALLOY

C161.TP.601 (¹) 6 6 350 15 3 3 27,5

C161.TP.652 6,5 4,5 + 2 350 15 3 3 31
C161.TP.702 7 4+3 350 15 3 3 35
C161.TP.802 8 4+4 350 15 3 3 40

(¹)Standard length (²) max horizontal working load with safety factor 1:5

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 115 G520-0 • rev. 14:17 EN

 10
CONTROL INSTRUMENTS

www.omac-italy.it 117
DYNAMOMETERS

C40.4
Mechanical dynamometer type DIN13 with built-in dampener.
Dial diameter: 200 mm. Manual regulation of zero (tare).
Overload protection up to 180% over the full scale value.
Working temperature range: ‑30 to +60 °C.
Accuracy: ±1% of full scale value. Fittings for omega shackles.
Safety factor:5.

OPTIONAL DEVICES
IMAX Index of max
GRO Omega shackles
GAS Hinged hook with connection for shackles

Capacity Sensitivity Dimensions (mm) Weight

daN daN A B C D E kg
C40.4.10 1000 2 268 25 20 155 134 9
C40.4.20 2000 5 268 25 20 155 134 9
C40.4.30 3000 10 268 25 20 155 134 9
C40.4.60 6000 20 282 35 26 179 158 13
C40.4.100 10000 20 298 50 36 179 158 13

C43.4
High precision digital electronic dynamometer.
Tare zeroing and weight restore. Locking/unlocking of the displayed weight.
Peak holding
function. Visualization of gross, net and tare weights. Selection of the measuring unit
(kg, t, ton, Lbs, kN). Selection of the speed of reading. Auto power-off enabling function.
Calibration of zero and weight. Accuracy: ±0,15% of full scale value.
Working temperature range: -10 to +55 °C.
Max overload admitted: 200% of full scale value.
Protection factor: IP65. 5-digit 17 mm display.
Power supply: 9V with standard battery.
Autonomy: 200 hours circa.

OPTIONAL DEVICES
01 No. 1 pair of high-resistance eyebolts.
02 No. 2 sets of spare batteries.

Capacity Sensitivity Dimensions Weight

daN daN mm kg
C43.4.25 2500 1 218 x 90 x 56 1,35
C43.4.50 5000 2 230 x 90 x 56 1,85
C43.4.100 10000 5 315 x 110 x 59 3,60
C43.4.125 12500 5 315 x 110 x 59 3,60
C43.4.250 25000 10 350 x 126 x 70 5,50
CONTROL INSTRUMENT

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 119 D140-0 • rev. 02:17 EN

 METERCOUNTER, SAG-SCOPE and THERMOMETERS for CONDUCTORS

F77 Device for measuring the length of ropes and cables. Measuring wheel made of steel.
Idle wheels made of aluminum or nylon. Fit for ropes with diameter up to 50mm.
• Dimensions: A x B x C = 430 x 370 x 255 mm; D = 70 mm.
• Mass: 5,5 kg.

C120
Sagging scope for conductors, complete with fittings for tower legs.
Supplied with protective case.
• Dimensions: 400 x 300 x 180 mm
• Weight: 12 kg

OPTIONAL DEVICES
001 Device for anchorage on round poles up to 600 mm diameter.
002 Stadia for easier and more precise sagging operation.
Equipped with level for horizontal alignment. Supplied with case.

001 002

F196.A
Thermometer for conductors, made up of a bulb shaped and dimensioned like a
conductor. Column reading, scale in Celsius degrees (°C).
• Length 600 mm.
• Weight 0,5 to 1 kg.
Supplied with case.
NOTE: in order, please specify the diameter of the conductor.

F196.C
Thermometer for conductors. The dial diameter 80 mm, with incorporated sensor, can
be fixed easily on the conductor by means of its elastic clamp.
Double scale (°C and °F).
Supplied with case.
CONTROL INSTRUMENT

Dimensions and weights are without optional devices. All data may change without notice. Images and drawings are indicative only.

www.omac-italy.it 120 D210-1 • rev. 04:17 EN

OMAC
via Pizzo Camino, 13
24060 Chiuduno (BG) - Italy
T +39 035 838092 - F +39 035 839323
omac@omac-italy.it watch the video

www.omac-italy.it