Wiring Contractor’s Completion and Test Report
Application No………………......... Tariff applicable………........…............… Place………………………………....…
Load sanctioned……………......... Deposit amount…………......………….... Date……………………………..……..
No. of outlets…………………........ Receipt No……………………………….
I/We wish to inform you that the installation at………………..occupied by ………………...............…………
has been completed by me/us in all respects and is now ready for test.
I/We enclose herewith two duplicate detailed wiring diagrams for this installation along with description of the wiring.
The details of the installation and test obtained are as follows:
Nature of Demand No. of points Wattage of points Total Wattage Insulation Resistance Remarks
To earth Between No. of distribution
Poles boards, starters,
Iron clad switches, etc.
LIGHTING
Lights
(a) Drops
(b) Brackets
(c) Watertights
(d) Other
Nature of Demand No. of points Wattage of points Total Wattage Insulation Resistance Remarks
To earth Between No. of distribution
Poles boards, starters,
Iron clad switches, etc.
Fittings Fans
Wall plugs
DOMESTIC APPLIANCES
Cookers Refrigerators Water
Heaters/
/Geysers
Air-Conditioners Other purposes
Wall Plugs
MOTORS Number BHP each Total BHP Industrial
Pumps
Other purposes
Total Load
CAPACITORS
Make Rating KVA
MCB
Make Amps
METER BOX
Make Size
1. Size of wire of installation open/casing and capping/conduit wiring etc., adopted should be given under description.
2. The wiring diagram & description of wiring should be signed by the wiring contractor.
The installation was tested by me on ……......./............./20......
Customer’s Signature: Supervisor’s Signature: Wiring Contractor’s Signature: Address:
Certificate No.: License No.:
Address: Address:
___________
