T-57C+

Core Alignment fusion splicer

T-57C+
Powered by

Power through with ease

Proven field High environmental Smart and ease Reduce work time
toughness resistance Splicing 6s
Heating 15s
 Specifications
Item T-57C+
Material Silica glass
Optical fibre Fibre count / Profile types Single / SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657)
requirements Fibre diameter Cladding diameter : 80 ~ 150 m, Coating diameter : 100 ~ 1,000 m
Cleave length 5 ~ 16mm with coating clamp
Splice loss (typical)*1 SMF : 0.02dB, MMF : 0.01dB, DSF : 0.04dB, NZDSF : 0.04dB, BIF : 0.02dB
Return loss (typical) 60dB or greater
Splice time (typical) 6sec(SM G652 Quick Mode), 8sec(Auto Mode)
Heating time (typical) 15sec (FPS-61-2.6 sleeve, S60mm 0.25)
Standard
Splice & Heat cycles per battery full charge*2 Approx. 310 (BU-16)
performance
2 CMOS cameras observation,
Fibre view & magnification
380X (zoom : 760X) for X or Y single axis view. 270X for both X & Y dual axis view
Proof test 1.96 ~ 2.09N
Applicable protection sleeve 60mm, 40mm & Sumitomo Nano sleeves
Splice programs Max. 300, 40 are pre-optimised, 260 editable by user
Programs
Heating programs Max. 100, 23 are pre-optimised, 77 editable by user
Splice image capture / Splice data storage 200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 16GB SD card)
Provided, 250 m, 900 m tight & loose buffer fiber, 2&3mm jacket cord and rectangular drop cable, 3.5mm
Multi clamps
round drop cable
Reversible coating clamps Provided
Functions
Onboard user training video Provided
Automatic fibre identification SMF / MMF / DSF / NZDSF / BIF / Other
Automatic arc calibration Automatically compensates for environmental condition changes
Display of remaining Splice & Heat cycles Provided (Battery mode)
Size 128(W) x 154(D) x 130(H) mm (without anti-shock rubber)
Size / Weight Weight 1.7kg (without Battery) / 2.1kg (with Battery BU-16)
Monitor 5.0" touch screen color LCD display
DC output DC 12V (for JR-6+)
Terminals USB port USB 2.0 (mini-B type)
Storage media SD / SDHC memory card MAX32GB
AC input AC 100 ~ 240V, 50/60Hz (ADC-16)
Power supply DC input DC 10 ~ 15V
Battery pack Li-ion 10.8V, 6,400mAh (BU-16)
Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non-condensing),
Operating condition
Wind velocity : up to 15m/sec
Storage condition Temperature : -40 ~ +80°C, Humidity : 0 ~ 95% (non-condensing), Battery : -20 ~ +30°C (long term)
Electrode life *3 6,000 arc discharges
Software updates Internet
Data management Can be stored, edited and analyzed by dedicated PC software
* 1: Average value of the final inspection in room temperature with Sumitomo identical fibre. Measured by cut-back method relevant to ITU-T and IEC standards.
* 2: Splice & Heat cycles may vary depending on the battery status and the operating environment.
* 3: Achieved in lab condition. Electrode life may vary depending on the operating environment..

Environmental Durability* Accessories

Test details Part name Part No. Remarks
Drop from 76cm on 5 faces(excluding top face), FHS-025 For Φ0.25mm single fibre
Shock resistance
4 edges and corners(bottom face only) FHS-09 For Φ0.9mm single fibre
Accessories for Splicer

Impact resistance Equivalent to IK07 on LCD monitor FHS-025/LB5 For 0.9mm loose buffered single fibre
Water resistance Equivalent to IPx2 Fibre holder FHD-1 For indoor / outdoor rectangular drop cable
Dust resistance Equivalent to IP5x 1SM-ST For indoor rectangular drop cable
* Splicer operation after shock, impact, water or dust tests, was confirmed FHC-3 For 3mm cable
under battery power, by Sumitomo. Lynx2-UML-S For Φ3mm cord and Φ 0.9mm single fibre
Does not guarantee the product will not be damaged by these conditions.
Battery pack BU-16 Li-ion 6,400mAh
Battery charger BC-16 —
Basic Accessories Car battery cable PCV-16 Vehicle 12V outlet
Part name Part No. Qty. Electrode ER-10 —
AC adapter ADC-16 1 pc FC-8R-FC Auto blade rotation + cleave counter
Handheld cleaver
AC power cord PC-AC<X>* 1 pc FC-8R-F Auto blade rotation
Cooling tray — 1 pc FC-6R+ Auto blade rotation
Bench-top Cleaver
Accessories

Spare electrode ER-10 1 pair FC-6S+ Single fibre cleaver

Quick reference guide — 1 pc Jacket remover JR-M03 Jacket remover for single fibre
Carrying case with worktable CC-72 1 pc Loose tube cutter LTC-01 —
Hand strap — 1 pc Alcohol dispenser HR-3 —
USB cable — 1 pc FPS-1 60mm, diameter after shrink approx. Φ3.2mm
* X=2(USA), 3(EU), 5(UK/HK), 6(AUS), 7(SOUTH AFRICA) Fibre protection
FPS-40 40mm, diameter after shrink approx. Φ3.2mm
Items listed in the table are typical contents included with the splicer body. sleeve
FPS-61-2.6 61mm, diameter after shrink approx. Φ2.6mm
Overall kit content may vary regionally. Please check with your local
authorised reseller to confirm kit content in your region.

Carrying case with worktable Handy cleaver Bench-top cleaver Jacket remover Available for Lynx-Custom FitTM Electrode
CC-72 FC-8R series FC-6+ series JR-M03 Splice-On Connector ER-10

● Specifications are subject to change without prior notice. Designed in Japan

0T57C+10-EMEA-EN001(2022.05)