Sumitomo Type-81C Specs
TYPE-81C
Provided by www.AAATesters.com
Direct Core Monitoring Fusion Splicer
TYPE-81C
Rapid, Elite, Connected
Faster Splicing 6sec / Heating 14sec
Splicing loss SMF 0.01dB(Typical)
Fully Optimized Touch Screen Durable & Rugged
Two Independent Control Panel
Heaters for
High Productivity
Specifications
Items TYPE-81C
Material Silica glass
Optical fiber Fiber count / Profile types Single / SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657), EDF
requirements Fiber diameter Cladding diameter : 80 ~ 150μm, Coating diameter : 100 ~ 1,000μm
Cleave length 5 ~ 16mm with coating clamp
Splice loss (typical)* 1 SMF : 0.01dB, MMF : 0.01dB, DSF : 0.03dB, NZDSF : 0.03dB
Return loss (typical) 60dB or greater
Splice time (typical) 6sec(SM G652 Quick Mode), 7sec(SM G652 Std. Mode), 8sec(Auto Mode)
Standard Heating time (typical) 14sec (FPS-61-2.6 sleeve, Slim 60mm Quick Mode )
performance Splice & Heat cycles per battery full charge* 2
Approx. 230 (BU-11)
Fiber view & magnification 2 CMOS cameras observation,
320X (zoom : 700X) for X or Y single axis view, 88X for both X & Y dual axis view
Proof test 1.96 ~ 2.09N
Applicable protection sleeve 60mm, 40mm & Sumitomo Nano sleeves
Splice programs Max. 300, 74 are pre-optimsed, 226 editable by user
Programs
Heating programs Max. 100, 24 are pre-optimsed, 76 editable by user
Splice image capture / Splice data storage 200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 8GB SD card)
Attenuation splicing 0.1dB to 15dB in 0.1dB increments
Universal clamps Provided, 250μm, 900μm tight & loose buffer fiber
Reversible coating clamps Provided
Dual automatic independent heaters Provided
Functions User-selectable heater clamp operation Provided
Onboard user training video Provided
Automatic fiber identification SMF / MMF / DSF / NZDSF / BIF / Other
Automatic arc calibration Automatically compensates for environmental condition changes
Display of remaining Splice & Heat cycles Provided (Battery mode)
Size 120(W) x 154(D) x 130(H) mm (without anti-shock rubber)
Size / Weight Weight 1.8kg (without Battery) / 2.0kg (with Battery BU-11S ) / 2.1kg (with Battery BU-11 )
Monitor 4.1" touch screen color LCD display
DC output DC 12V (for JR-6)
Terminals USB port USB 2.0 (mini-B type)
Storage media SD / SDHC memory card MAX32GB
AC input AC 100 ~ 240V, 50/60Hz (ADC-1430S)
Power supply DC input DC 10 ~ 15V
Battery pack Li-ion 11.1V, 2,300mAh (BU-11S) / Li-ion 11.1V, 4,600mAh (BU-11)
Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non-condensing),
Operating condition
Wind velocity : up to 15m/sec
Storage condition Temperature : -40 ~ +80°C, Humidity : 0 ~ 95% (non-condensing), Battery : -20 ~ +30°C (long term)
Electrode life * 3 3,000 arc discharges
Software updates Internet
Data management Can be stored, edited and analyzed by dedicated PC software
*1 : Average value of the final inspection in room temperature with Sumitomo identical fiber. Measured by cut-back method relevant to ITU-T and IEC standards.
*2 : Splice & Heat cycles may vary depending on the battery status and the operating environment.
*3 : Electrode life may vary depending on the operating environment.
Environmental Durability* Accessories
Test details Part name Part No. Remarks
Shock resistance Drop from 76cm on 5 faces (excluding top face) FHS-025 For φ0.25mm single fiber
Accessories for Splicer
Equivalent to IPx2 (Operates normally after being exposed to water dripping FHS-09 For φ0.9mm single fiber
Water resistance at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)
Fiber holder FHS-025/LB5 For 0.9mm loose buffered single fiber
Equivalent to IP5x (Operates normally after 8 hours in a dust FHD-1 For drop/indoor cable (Cable size : typical 2.0 x 3.1 or 2.6mm)
Dust resistance chamber containing dust of particle size 75μm or below) 1SM-ST For indoor cable (Cable size : typical 1.6 x 2.0mm)
*Confirms the battery operation in tests carried out by Sumitomo. FHC-3 For 3mm cable
Does not guarantee that the product is free of faults or damage. Battery pack BU-11/11S Li-ion 4,600mAh BU-11, 2,300mAh BU-11S
Battery Charger BC-11 —
Basic Accessories Car battery cable PCV-11 For car battery operation (cigarette socket type)
V-groove cleaning brush VGT-2 Brush for cleaning V-groove
Part name Part No. Qty.
Electrode ER-10 —
AC adapter ADC-1430S 1 pc
Handheld fiber FC-7R-F Automatic blade rotation cleaver
AC power cord PC-AC<X>* 1 pc
cleaver FC-7M-F8 —
Cooling tray — 1 pc
FC-6S-C Table-top high precision cleaver
Spare electrode ER-10 1 pair Fiber cleaver
Accessories
FC-6RS-C Automatic blade rotation cleaver
Operating CD manual — 1 pc
Jacket remover JR-M03 Jacket remover for single fiber
Quick reference guide — 1 pc
Loose tube cutter LTC-01 —
Carrying case with worktable CC-81 1 pc Alcohol dispenser HR-3 —
Hand strap — 1 pc
FPS-1 60mm, diameter after shrink approx. φ3.2mm
USB cable — 1 pc Fiber protection
FPS-40 40mm, diameter after shrink approx. φ3.2mm
*X=2(USA), 3(EU), 5(UK/HK), 8(CHINA), 9(INDIA) sleeve
FPS-61-2.6 61 mm, diameter after shrink approx. φ2.6mm
At least, the above basic accessories come with splicer main body.
Some additional accessories may be or may not be included as a splicer standard
kit contents. The standard splicer kit contents varies in each region/ country.
Please ask details to your nearest distributors.
Carrying case with worktable Table-top cleaver Handy cleaver Jacket remover Available for Electrode
CC-81 FC-6 / FC-6R series FC-7 / FC-7R series JR-M03 Lynx-Custom Fit TM ER-10
Splice-On Connector
Tokyo (Japan) Hong Kong Manila (Philippines)
Sumitomo Electric Industries,Ltd. Sumitomo Electric Asia, Ltd. SEI(Philippines)Incorporated
http://global-sei.com/sumitomo-electric-splicers Tel : +852-2576-0080 Tel : +63-2-811-2755 56
Bangkok (Thailand) Singapore Gurgaon (India)
Sumitomo Electric (Thailand) Ltd. Sumitomo Electric SEI Trading India Pvt. Ltd.
Tel : +66-2-260-7231 5 Asia Pacific Pte. Ltd. Tel: +91-124-4577470
Tel :+65-6261-3388
Please contact us Mail to : fs-inquiry-sml@list.sei.jp
Specifications are subject to change without prior notice. Designed in Japan
081C01-ASIA-EN002 (2015.10)
(TP)
