TYPE-Q102-CA+
High Definition Core Aligning
fusion splicer
TYPE-Q102-CA+
Dependable
Splicing 5s/Heating 8s/Splice loss 0.01dB
320
Preventive High Speed Dual Proven Field Extended Battery
Maintenance Independent Heaters Toughness Life for 320 Cycles
Specifications
Items TYPE-Q102-CA+
Material Silica glass
Optical fiber Fiber count / Profile types Single / SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657), CSF(G.654), EDF
requirements Fiber diameter Cladding diameter : 80 ~ 150 m, Coating diameter : 100 ~ 1,000 m
Cleave length 5 ~ 16mm with coating clamp
Splice loss (typical)*1 SMF : 0.01dB, MMF : 0.01dB, DSF : 0.03dB, NZDSF : 0.03dB
Return loss (typical) 60dB or greater
Splice time (typical) 5sec(SM G652 Quick Mode), 7sec(SM G652 Std. Mode), 7sec(Auto Mode)
Heating time (typical) 8sec (FPS-61-2.6 sleeve, S60mm 0.25 Quick Mode )
Standard
Splice & Heat cycles per battery full charge*2 Approx. 320 (BU-16)
performance
2 CMOS cameras observation,
Fiber view & magnification
380X (zoom : 760X) for X or Y single axis view, 270X for both X & Y dual axis view
Proof test 1.96 ~ 2.09N
Applicable protection sleeve 60mm, 40mm & Sumitomo Nano sleeves
Splice programs Max. 300, 74 are pre-optimized, 226 editable by user
Programs
Heating programs Max. 100, 27 are pre-optimized, 73 editable by user
Splice image capture / Splice data storage 200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 8GB SD card)
Attenuation splicing 0.1dB to 15dB in 0.1dB increments
Universal clamps Provided, 200 m, 900 m tight & loose buffer fiber
Reversible coating clamps Provided
Dual automatic independent ovens Provided
Functions User-selectable oven clamp operation Provided
Onboard user training video Provided
Automatic fiber identification SMF / MMF / DSF / NZDSF / BIF / Other
Automatic arc calibration Automatically compensates for environmental condition changes
Display of remaining Splice & Heat cycles Provided (Battery mode)
Wireless LAN connectivity (Option)*3 Provided
Size 128(W) x 154(D) x 130(H) mm (without anti-shock rubber)
Size / Weight Weight 1.9kg (without Battery) / 2.2kg (with Battery BU-16)
Monitor 5.0" touch screen color LCD display
DC output DC 12V (for JR-6+)
Terminals USB port USB 2.0 (mini-B type)
Storage media SD / SDHC memory card MAX32GB
AC input AC 100 ~ 240V, 50/60Hz (ADC-16)
Power supply DC input DC 10 ~ 15V
Battery pack Li-ion 10.8V, 6,400mAh (BU-16)
Operating condition Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non-condensing),
Wind velocity : up to 15m/sec
Storage condition Temperature : -40 ~ +80°C, Humidity : 0 ~ 95% (non-condensing), Battery : -20 ~ +30°C (long term)
Electrode life *4 6,000 arc discharges
Software updates Internet
Data management Can be stored, edited and analysed by dedicated PC software
*1 : Average value of the final inspection in room temperature with Sumitomo identical fiber. Measured by cut-back method relevant to ITU-T and IEC standards.
*2 : Splice & Heat cycles may vary depending on the battery status and the operating environment.
*3 : Wireless LAN connectivity is not available in all countries. For more details, please refer to our Web site. https://global-sei.com/sumitomo-electric-splicers/products/sumicloud/
*4 : Achieved in lab condition. Electrode life may vary depending on the operating environment.
Environmental Durability* Accessories
Test details Part name Part No. Remarks
Shock resistance Drop from 76cm on 5 faces (excluding top face) SumiCloud card WLSD series For SumiCloudTM connection
Equivalent to IK07 on LCD monitor (Protected against 2J FHS-025 For 0.25mm single fiber
Impact resistance impact, it is equivalent to a 500g force from 40cm) FHS-09 For 0.9mm single fiber
Accessories for Splicer
Equivalent to IPx2 (Operates normally after being exposed to water dripping FHS-025-LB5-L250um Loose Buffer Holder - Left Side
Water resistance at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°) Fiber holder FHS-025-LB5-SET250um Loose Buffer Holder Set (L&R)
Equivalent to IP5x (Operates normally after 8 hours in a test LYNX2-HOLDER-C Lynx SOC Ferrule Holder
Dust resistance chamber with circulating dust particles smaller than 75 m) LYNX2-HOLDER-S Lynx SOC Ferrule Holder (FPS Holder)
*Splicer operation after shock, impact, water or dust tests, was confirmed under Battery pack BU-102 Li-ion 6,400mAh
battery power, by Sumitomo. Does not guarantee the product will not be damaged by these conditions. Battery charger BC-102 —
Car battery cable PCV-16 For car battery operation (cigarette socket type)
Basic Accessories
V-groove cleaning
Part name Part No. Qty. VGB-003-CR Brush for cleaning V-groove
brush
AC adapter ADC-16 series 1 pc
AC power cord PC-AC<X>* 1 pc Electrode ER-10 —
Cooling tray — 1 pc FC-8R Automatic blade rotation cleaver with cleave counter
Fiber Cleaver
Spare electrode ER-10 1 pair
Accessories
FC-6R+ Automatic blade rotation cleaver
Quick reference guide — 1 pc Jacket remover JR-M03 Jacket remover for single fiber
Carrying case with worktable CC-72 1 pc Alcohol dispenser HR-3 —
Hand strap — 1 pc FPS-1 60mm, diameter after shrink approx. 3.2mm
USB cable — 1 pc Fiber protection FPS-40 40mm, diameter after shrink approx. 3.2mm
sleeve
*X=2(USA), 3(EU), 4(JP), 5(UK), 6(AUS), 7(South Africa) FPS-61-2.6 61mm, diameter after shrink approx. 2.6mm
Items listed in Basic Accessories are always included with the splicer body. Overall kit content may vary regionally. Please check with your local authorised reseller to confirm kit content in your region.
Ordering Information
Part name Part No.
TYPE Q102-CA+ Quantum Fusion Splicer Kit includes Fiber Stripper (JR-M03), One Pack of Fiber Protection Sleeves,
TYPE-Q102-CAp-KIT-1
Shipping Case, one set of Spare Electrodes (ER-10), AC Interface/Battery Charger with Power Cord, Battery Unit (BU-102)
TYPE Q102-CA+ Quantum Fusion Splicer Kit includes Precision Cleaver (FC-6S+), Fiber Stripper (JR-M03), One Pack of
TYPE-Q102-CAp-KIT-2p Fiber Protection Sleeves, Shipping Case, one set of Spare Electrodes (ER-10), AC Interface/Battery Charger with
Power Cord, Battery Unit (BU-102)
TYPE Q102-CA+ Quantum Fusion Splicer Kit includes Precision Cleaver w/ Auto Rotating Blade (FC-6R+), Fiber
TYPE-Q102-CAp-KIT-6RSCp Stripper (JR-M03), One Pack of Fiber Protection Sleeves, Shipping Case, one set of Spare Electrodes (ER-10), AC
Interface/Battery Charger with Power Cord, Battery Unit (BU-102)
TYPE Q102-CA+ Quantum Fusion Splicer Kit includes 250um, 900um and Loose Buffer Fiber Holders, Precision
TYPE-Q102-CAp-KIT-6RSCpFH Cleaver w/ Auto Rotating Blade (FC-6R+), Fiber Stripper (JR-M03), One Pack of Fiber Protection Sleeves, Shipping Case,
one set of Spare Electrodes (ER-10), AC Interface/Battery Charger with Power Cord, Battery Unit (BU-102)
TYPE Q102-CA+ Quantum Fusion Splicer Kit includes Precision Cleaver w/ Auto Rotating Blade (FC-8R), Fiber Stripper
TYPE-Q102-CAp-KIT-8R (JR-M03), One Pack of Fiber Protection Sleeves, Shipping Case, one set of Spare Electrodes (ER-10), AC Interface/Battery
Charger with Power Cord, Battery Unit (BU-102)
TYPE Q102-CA+ Quantum Fusion Splicer Kit includes 250um, 900um and Loose Buffer Fiber Holders, Precision Cleaver
TYPE-Q102-CAP-KIT-8RFH w/ Auto Rotating Blade (FC-8R), Fiber Stripper (JR-M03), One Pack of Fiber Protection Sleeves, Shipping Case, one set of
Spare Electrodes (ER-10), AC Interface/Battery Charger with Power Cord, Battery Unit (BU-102)
SUMITOMO ELECTRIC LIGHTWAVE (NORTH CAROLINA, USA) Designed in Japan
201 South Rogers Lane, Suite 100, Raleigh, NC 27610, U.S.A | 1-800-358-7378 | www.sumitomoelectric.com 102C+01-NA-EN001 (2020.05)
Specifications are subject to change without prior notice. (TP)
