CHRILL RAJA DSILVA

Inspection Engineer
PROFILE EDUCATION
Result oriented professional with more SRM University
than 13+ years of extensive B.Tech Mechanical Engineering
experience in Coordination and
performing of shop and field
WORK EXPERIENCE
Inspection activities. Review of design
drawings and calculations, shop
fabrication, GFRC , NDE reports and
Foresight Tensile Structure
qualification of welding procedures
(WPS/PQR) and welders (WPQ) as per Project Engineer
ASME BPVC Sect. IX, witnessing of MAR 2022 – TILL DATE
destructive testing in labs, review of  Ensures that construction information is timely availability to all
customers spec’s, updating of department when needed.
procedures and written practices in  Ensures that projects milestone dates are achieved.
accordance with ASME /ASNT codes  Continual improvement with regards to safety, quality and best
latest addenda/editions. Storage practice.
tanks inspections in accordance with  Knows and implement direct work sequencing to expedite project
API 650 and API 620. delivery.
 Ensure all technical information is available when required for the
Monitoring of QA/QC systems. delivery of design and / or construction.
Coordination and performing of NDE.  Able to apply engineering principles in the preparation for
Liaison with Authorized ASME calculations, drawings, sketches and resolution of engineering
Inspector. Coordination for challenges within the specific knowledge areas.
preparation and defense of ASME  Implement engineering systems, documentation and control in
Handling of Standards/Codes ASME, compliance with Health & Safety legislation, company and industry
AWS, NBIC, API, ASTM, ASCE, SSPC, standards.
NACE, PDVSA y others.  Monitors contractors and sub-contractors in the project site.
 Coordinate and Conduct Material inspections with subcontractors
and Consultant to verify the compliance to the specifications.
Ensure all rejected materials from internal and consultant inspections
are tagged and removed from the site.
 Check GFRC units shall be set level, plumb, square and true within
CONTACT
allowable tolerances.
PHONE:  Create a working environment that recognizes and develops
+919789136010 engineering talent.
 Create a challenging and harmonious working environment.
WEBSITE: www.linkedin.com/in/chrill-  Able to properly represent the company when involved with
dsilva-5bb54940 external organizations.
 Ensure compliance with the company’s policies, rules and
EMAIL: procedures related to Health, Safety and Environmental
chrilldsilva@gmail.com Management.
 Dynamic Engineering Consultant
STEEL STRUCTURAL INSPECTOR
CERTIFICATION AUG 2017 – JAN 2020

 Monitoring all structural and GFRC engineering aspects of the

 Certified Welding Inspector project to ensure compliance with project specifications.
AWS/CWI.(certificate number  Liaising with the Senior Structural Engineer and other Engineers and
16103131) Managers to provide support and guidance as required on
temporary and permanent works.
 Certified in ASNT Level II at  Reviewing and approved material submittals, method statements,
the American society. PQD, etc. ,
 Comply with the project related protocol set up for inspection of
works and materials.
 LEAD AUDITOR - ISO  Apply and implement all quality controls/quality procedures of the
9001:2015 QMS site.
 Preparing and maintain separate logs for steel structural & GFRC for
track the flow of work.
 Attend meeting with client and other disciplines to overcome site
issues.
 Checking of strand jacking main steel link bridge lifting of 2000 tons.
 Carry out regular inspections of the steel structural materials
delivered to site and take all reasonable measures necessary to
DRIVING LICENSE ensure compliance by the Contractors with the Project requirements
including but not limited to drawings, specifications and Contract
Documents, best engineering practice, any agreed samples or
mock-ups, and/or local authority requirements or the relevant codes
 Valid UAE Driving license
or standards.
Holder.3634931  Identify and report unacceptable work by Contractor's as early as
possible.
 If observe any nonconformance work/activity at site, immediately
Nonconformance report has to be issued to the contractor with the
proper supporting documents and site observation report has to be
issued with the photographs for any minor defects observed at site.
 Qualified and highly experienced steel structural Inspector with vast
knowledge in best practices. Conducts high level reviews of
JOB EXPERTISE
proposed plans and completes physical inspections at construction
project sites. Supervise and monitor the rectification of defective
 Fabrication works
 Site inspection  Co-ordination with all other disciplines to resolve issues.
 Facade inspection  Adopt a proactive approach to site safety at all times by monitoring
and reporting potential un-safe work activities.
 Document verification
 QA/QC and method statement
German steel contracting L.L.C
review & preparation
SR. WELDING INSPECTOR/ Painting inspector
 Internal Quality Auditing Sep- 2014 to Jun-2017
 Codes and standards
 HSE procedures  Witnessing welding procedure qualification and welder
qualification.
 Witnessing coating procedure qualification and applicator
qualification.
 Material inspection of welding consumables, pipes and coating
sleeves.
 Reviewing and certifying reports related welding and coating
 Representing Owner/Client.
 Witnessing and endorsing the establishment of Welding Procedure
Specifications.
 Witnessing and qualifying welders through Welder Qualification Tests.
 Ensuring that works carried out were as per Client specification and
agreed Codes and Standards.
 Carrying out random/full inspection to ensure fabrication works were
as per Project Specifications, IFC drawings and in good practice.
 Carrying out Source/Material Inspections.
 Carrying out inspections on blasting/coating/painting works.
  Carrying out expediting works.
 Issuing NCRs if the need arises.
 Reviewing and endorsing all relevant documents (Project
Procedures, NDT, Inspection and fabrication related
documentations)
 Reviewing radiographs for Radiographic Testing.
PERSONAL DETAILS  Witnessing and verifying inspection and testing as required / as per
approved ITP (NDT, mechanical test, hydro/pneumatic/leak test,
 Date Of Birth : 14th Dec 1983 calibration of equipment’s etc.)
 Sex : Male  Reviewing Final Documentations.
 Issuing Release Notes or Inspection Certificates as required or
 Marital Status : Married
applicable.
 Nationality : Indian
 Passport No. : S1552076
PARASAKTHI ENGINEERING WORKS
QA/QC ENGINEER / WELDING INSPECTOR
Aug- 2008 to Sep-2014.

 Overall responsible for project construction activities

 Planning & monitoring of the project progress with respect to Time &
Cost
 Planning and utilization of manpower and materials
 Anchoring on-site erection & commissioning activities and ensuring
completion of project within the time & cost
 parameters and effective resource utilization to maximize the output
 Review of contractor’s execution plans, work scopes and schedules.
 Attend all technical Meetings with Consultants, Clients, Main
Contractor and coordinates works with other trades
 Control and delegate work to subordinates staff
 Daily site coordination meetings with subordinates in order to
evaluate and plan ongoing and upcoming activities,
 Resolve any unforeseen problems, Evaluate progress and quality of
work on a daily basis.
 Coordination with consultants and clients regarding daily progress
planning.
 Reviewing of contractor’s execution plans, work scopes and
schedules.
 Carry out Dimensional & Visual inspection of the vessel.
 Maintain all drawing files, D.C.R as per latest Revision, N.C.R.
 Day to day production planning.
 Co – ordination with different departments such as cutting
 Yard, Store, machine shop, planning, dishing, materials for better
flow of Material on time.
 Preparation of fabrication schedules.
 Production & manpower planning with contractors
 Drawing study like P & ID , Structural , Fabrication Drawings
 Monitoring of all the fabrication stages to avoid any kind of non-
conformity.
 Second shift planning of all running jobs & following it to expedite
the work.
 Working with third party inspection agencies like EIL, CEIL, SGS,
Jacobs etc.

 References / Further details available on request