Toro™ TH430
Safer.
Stronger.
Smarter.
2
Technical specification
Toro™ TH430
Toro™ TH430 is a reliable, hard-working dump truck specifically The touch screen color display in the cabin provides service
designed for underground conditions. With its robust structure, information, easy system diagnostics and alarm log files, as
compact size and fit-for-purpose components, the truck the Sandvik Intelligent Control System monitors the equipment
is tailored to meet the productivity targets in challenging health and provides early warnings.
environments. The truck’s new heavy-duty axles, using limited
slip differentials to maintain traction, improve availability and Toro™ TH430 is an ideal choice for:
reduce total costs of ownership. • Ramp or level production haulage in medium sized mines
• Mine development projects in medium and large mines
An enclosed and air conditioned cabin is standard for increased • Tunneling projects with restricted headroom
operator safety and comfort. The cabin uses dust and noise • Three pass loading with Toro™ LH410 loader
resistant upholstery materials and is ROPS and FOPS certified
to protect the operator in case of roll over or falling objects.
Equipped with Sandvik Intelligent Control System and a
7” display as standard, Toro™ TH430 dump truck answers to
today’s demands for data, connectivity and digitalization.
Capacities Dump box motion times & movements
Maximum payload capacity Discharging time 14 sec
30 000 kg
(SAE heaped 2:1)
Dumping angle 61°
Standard dump box 14.5 m³
Dump box range 14 – 18 m³
Operating weights*
Total operating weight 29 500 kg
Speeds (Level/Loaded) with Volvo TAD1342VE Tier 2
Front axle 21 900 kg
1st gear 6.6 km/h
Rear axle 7 600 kg
2nd gear 11.7 km/h
3rd gear 20.5 km/h
Loaded weights*
4th gear 36.6 km/h
Total loaded weight 59 500 kg
Front axle 29 200 kg
Rear axle 30 300 kg
* Unit weight is dependent on the selected options
TS3-TH430-B-07B/ENG/METRIC
Operational conditions and limits Transmission
Environmental temperature From -20°C to +50°C Fully automatic transmission with electric remote shifting system. Four forward
and two reverse gears.
With engine Volvo TAD1342VE from
Standard operating altitude -1500 m to +2000 m at 25 °C without Dana 6000 Series
rated power derate
Converter
Requirements and compliance
Dana C8000 Series with Lock up
Compliance with 2006/95/EC Low voltage directive
Compliance with 2004/108/EC Electromagnetic compatibility directive Axles
Compliance with 2006/42/EC Machinery directive Kessler D102 series spring applied
(Equipment for EU area, achieved with relevant options) Front axle hydraulic operated brakes, equipped
with standard differential, oscillation
Design based on EN 1889-1. Machines for underground mines.
Mobile machines working underground. Safety. Kessler D102 series, standard
Rear axle
Part 1: Rubber tyred vehicles. differential, fixed
Design based on MDG 15. Guideline for mobile and transportable equipment for
use in mines. (Equipment for Australia, achieved with relevant options) Tires
Electrical system based on IEC 60204-1. Safety of machinery – Electrical Tire size (Tires are application
equipment of machines – Part 1: General requirements approved. Brand and type 26.5 R 25 E4 **
subject to availability.)
Contains fluorinated greenhouse gases (closed cabin option)
Refrigerant R134a under pressure max 38 bar/550 PSI:
Filled weight: 2,0 kg
Hydraulics
CO2e: 2,860 tons
GWP: 1430
Door interlock for brakes
Information based on the F Gas Regulation (EU) No 517/2016
Filtration
Engine Filling pump for hydraulic oil
Diesel engine Volvo TAD1342VE Tier 2 Hydraulic oil tank capacity 265 l
Output 310 kw (416 hp) @ 2100 rpm Oil cooler for hydraulic and transmission oil capability up to 50°C ambient
temperature
Torque 2005 Nm @ 1260 rpm
ORFS fittings
Number of cylinders In-line 6
Sight glass for oil level, 2 pcs
Displacement 12.8 l
Cooling system Liquid cooled
Steering hydraulics
4-stroke, direct injection, turbo,
Combustion principle Fully hydraulic, center articulad, power steering with two double acting cylinders.
after cooler
Closed-center system with a load sensing piston type pump and pilot operated
Air Filtration Dry type orbital wheel steering.
Electric system 24 V Steering main valve Pilot operated
Emissions Tier 2, Euro Stage II Steering hydraulic cylinders 100 mm, 2 pcs
Steering pump Variable displacement piston pump
Ventilation rate MSHA 18,500 CFM Ventilation Rate
(Ultra low sulphur diesel) CANMET 27,000 CFM
Dump box hydraulics
Particulate index MSHA Particulate Ventilation Index
(Ultra low sulphur diesel) 10,500 CFM Fully hydraulic system, equipped with variable displacement piston pump. Oil
flows to box hydraulic system from the steering hydraulics. Oil flow from the
Exhaust system Catalytic converter with muffler
brake circuit pump is divided to the brake system and oil cooler motor.
Average fuel consumption at 50% load 40 l/h Control valve Solenoid operated
Fuel tank refill capacity 530 l Cylinders 140 mm, 2 pcs
Compatible with paraffinic diesel fuel Hydraulic pump Variable displacement piston pump
Yes
(EN 15940)
Main valve Solenoid operated
4
Brakes Measured vibration level
Service brakes are spring applied; hydraulically operated multi disc wet brakes on Whole body vibration was determined while operating the truck in a simulated
all wheels. Two independent circuits: one for the front and one for the rear axle. working cycle consisting of loading, unloading and driving with and without load.
Service brakes also function as an emergency and parking brake. Brake system The value is determined applying standards EN 1032 and ISO 2631-1.
performance complies with requirements of EN ISO 3450, AS2958.1 and SABS
1589. Maximum r.m.s. value aw [m/s2], driving
0,64
with load
Automatic brake activation system, ABA
VDVW over 15 min period [m/s1.75],
5,9
Brake oil tank capacity 76 l driving with load
Electrically driven emergency brake release pump
Foot operated brake pedal, fully modulated Measured sound level
Neutral brake, brake activates after 3sec in neutral gear The sound pressure level and sound power level at the operator’s compartment
have been determined in stationary conditions on high idle and at full load, with
engine Volvo TAD1342VE.
Operator’s compartment Sound pressure level
81 dB
LpA [dB re 20 μPa]
Toro™ TH430 dump truck cabin uses dust and noise resistant upholstery
materials and is ROPS and FOPS certified to protect the operator in case of roll Sound power level
over or falling objects. The cabin includes illuminated entrance with three-point 117 dB
LWA [dB ew 1 p W]
contact handles and anti-slip steps, as well as emergency exits. In addition, the
cabin is mounted on rubber mounts to reduce whole body vibration.
Control system, dashboard and displays
Cabin 7” display with adjustable contrast and brightness
12 V output for communication radio connection Critical warnings and alarms displayed as text and with light
Adjustable steering wheel Instrument panel with illuminated switches
Air conditioning unit located outside the cabin to reduce noise inside the cabin My Sandvik Digital Services Knowledge Box™ on-board hardware
Cabin mounted on rubber mounts to the frame to reduce vibrations Sandvik Intelligent Control System
Cyclone pre-filter for A/C device Supports 3G, 4G, LTE and WLAN data transfer
Emergency exit
Floor washable with water to reduce dust Rear and front frame
Inclinometers to indicate operating angle Automatic central lubrication
No high pressure hoses in the operator’s compartment Central hinge with adjustable lower bearing
Remote circuit breaker switch High strength structure with optimized material thicknesses. Reduced own
weight for higher overall hauling capacity and long structural lifetime. Welded
ROPS certification according to EN ISO 3471 steel construction.
FOPS certification according to EN ISO 3449 Tanks are part of the frame structure
Safety glass windows
Main components
Sealed, air conditioned, over pressurized, noise suppressed
closed cabin
Alternator 24 V, 150 A
Sound absorbent material to reduce noise
Batteries 2 X 12V, 950 CCA
Three-point contact access system with replaceable and colour coded handles
Starter 24 V, 7kW
and steps
LED lights:
Driving lights 4 pcs in front
Operator’s seat 2 pcs in rear
Adjustment according to the operator’s weight LED lights:
Working lights 1 pc in rear of cabin
Adjustable lumbar support 1 pc in side of unit
Fore & aft isolator to minimise vibrations in driving direction LED lights:
Parking, brake and indicator (blinkers)
2 pcs in front
Height adjustment lights
2 pcs in rear
Low frequency suspension 7” Color display, 3 modules, inbuilt
Control system
system diagnostics
Padded and adjustable arm rests
Reverse alarm (CE)
Selectable damping
Flashing beacon
Two-point seat belt
Reverse camera
TS3-TH430-B-07B/ENG/METRIC
Fire safety Options
Heat insulation on exhaust manifold, turbo, and isolated exhaust pipe DPF exhaust system, HJS (not available with Stage V)
Hot side - cold side design Driving direction lights (red / green)
Isolation of combustibles and ignition sources Electrical retarder TELMA for Volvo TAD1342VE engine
Portable fire extinguisher, 12 kg (CE) Emergency steering (CE)
Fire suppression system Eclipse™ with auto shutdown (CE)
Energy isolation Gear limit
Automatic discharge for pressure accumulators (brake system and pilot circuit) Harsh conditions package
Emergency stop push buttons according to EN ISO 13850 Integrated Weighing System (IWS)
Frame articulation locking device Jump start interface
Lockable main switch, ground level access Lower cabin height, 2445 mm
Mechanical dump box locking device Proximity Detection System Interface
Pressure release in the radiator cap Safety rails
Wheel chocks and brackets Seat, comfort, mid backrest with two-point seat belt
Spare rim 22.00-25/3.0 (for tyres 26.5R25)
Standard manuals
Starter isolator
Operator’s Manual English and other EU languages
Tyre pressure monitoring system
Maintenance Manual English and other EU languages
Wiggins fuel filling system
Parts Manual English
Wiggins quick filling set for fuel and oils (hydraulic, engine and transmission)
Service and Repair Manual English
2 x USB stick in pdf format, Optional engine
ToolMan
includes all the manuals
Diesel engine Volvo TAD1382VE
Decals English and other EU languages
Output 315 kW (428 hp) @ 1900 rpm
Options Emissions Euro Stage V
ANSUL Twin fire suppression system (CE) Engine brake Yes
Arctic package (preheater for hydr. oil tank, transmission and engine block) Ventilation rate (Ultra low sulphur diesel MSHA 14,000 CFM
and AdBlue) CANMET 15,500 CFM
Blue or clear flashing beacon
Particulate index
MSHA 500 CFM
CE Declaration of conformity (Ultra low sulphur fuel, AdBlue)
Cold climate package (incl. cabin heater, cabin window defroster and side mirrors CO2 NRTC cycle 683 g/kWh
with defrost system)
Diesel Particulate Filter and Selective
Exhaust system
Control system tool kit Catalytics Reduction
Cover grills for lamps Fuel consumption 39 l/h
CRN pressure accumulator Compatible with paraffinic diesel fuel
Yes
(EN 15940)
Direct feed for beacon
Available boxes
Box capacity SAE heaped 2:1 (m3) * 14.5 (standard) 16 18 14 m3 (ejector)
Material broken density with fill factor 90% (t/m3) 2.3 2.1 1.9 1.9
* According to SAE 1363 / ISO 6483.
Note that more boxes can be available, please contact your local Sandvik representative for more information.
6
Grade performance (standard engine)
Volvo TAD1342VE, Tier 2 (3% rolling resistance, with lock-up engaged)
Empty
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 17.0 20.0
1:12 1:10 1:8 1:7 1:6 1:5
1st gear (km/h) 6.7 6.7 6.7 6.7 6.6 6.6 6.6 6.6 6.5 6.5
2nd gear (km(h) 12.0 11.9 11.9 11.8 11.7 11.7 11.6 11.5 11.5 11.3
3rd gear (km/h) 21.0 20.8 20.6 20.4 20.2 19.8 17.5 16.1 14.2
4th gear (km/h) 37.5 36.8 36.2 30.3 25.6
Loaded
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 17.0 20.0
1:12 1:10 1:8 1:7 1:6 1:5
1st gear (km/h) 6.7 6.6 6.6 6.6 6.5 6.5 6.4 6.4 6.4 5.8
2nd gear (km(h) 11.9 11.8 11.6 11.5 11.4 10.2 9.0 8.1
3rd gear (km/h) 20.7 20.3 18.6 15.4
4th gear (km/h) 36.5 27.7
Grade performance (optional engine)
Volvo TAD1382VE, Stage V (3% rolling resistance, with lock-up engaged)
Empty
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 17.0 20.0
1:12 1:10 1:8 1:7 1:6 1:5
1st gear (km/h) 6.1 6.1 6.1 6.1 6.0 6.0 6.0 6.0 6.0 5.9
2nd gear (km(h) 10.9 10.9 10.8 10.8 10.7 10.6 10.6 10.5 10.5 10.4
3rd gear (km/h) 19.1 19.0 18.8 18.6 18.4 18.3 17.4 16.1 14.3
4th gear (km/h) 34.2 33.6 33.0 30.2 25.7
Loaded
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 17.0 20.0
1:12 1:10 1:8 1:7 1:6 1:5
1st gear (km/h) 6.1 6.1 6.0 6.0 5.9 5.9 5.9 5.8 5.8 5.7
2nd gear (km(h) 10.8 10.7 10.6 10.5 10.4 10.1 9.0 8.2
3rd gear (km/h) 18.9 18.5 18.2 15.5
4th gear (km/h) 33.3 27.7
TS3-TH430-B-07B/ENG/METRIC
Dimensions
Dump boxes Std Ejector
Volume SAE heaped 2:1 * (m3) 14.5 16 18 14
Maximum material density with 90%
(t/m3) 2.3 2.1 1.9 1.9
fill factor
Overall machine length L1 (mm) 10 259 10 401 10 453 10 449
Rear axle to rear of machine L2 (mm) 1662 1805 1856 1719
Dump position height max H1 (mm) 5 418 5 628 5 700 -
SAE heap height H2 (mm) 3 029 3 083 3 198 3 248
Dumpbox spillguard H3 (mm) 2 358 2 412 2 562 2 598
Discharge height H4 (mm) 607 451 412 827
Ejector box tailgate height H5 (mm) - - - 2 113
Dumpbox width W1 (mm) 2 948 2 948 2 848 2 860
Dumpbox inner turning radius R1 (mm) 4 544 4 544 4 597 4 595
Minimum tunnel width T1 (mm) 5 349 5 292 5 255 5 255
Tunnel width T2 (mm) 4 740 4 776 4 712 4 713
* According to SAE 1363 / ISO 6483
8
Dimensions with 14.5 m3 box
Dimensions are shown in millimeters and based on standard vehicle configuration (dump box for 2.3 t/m3 material, heaped volume definition with 44 mm tire deflection,
unloaded. The dimensions are indicative only.
rocktechnology.sandvik
TS3-TH430-B-07B/ENG/METRIC © Sandvik Mining and Construction Oy 2024. SANDVIK is a registered trademark owned by
Sandvik Intellectual Property AB in Sweden and other countries. Sandvik Mining and Construction Oy reserves the right to alter
specifications without notice. Note: Machines shown in pictures may be equipped with options.
