1/2
Contactless Hall-IC Tilt Angle Sensor
PMP-HTL Series
・Contactless Single / Dual Axis Tilt Angle Sensor
Single Axis (X-axis ONLY) : PMP-xxHTL
Dual Axis : PMP-xxHTZL
・Effective Electrical Tilt Angle : ±5°(PMP-5HTL / 5HTZL)
±10°(PMP-10HTL / 10HTZL: Standard)
±20°(PMP-20HTL / 20HTZL)
±30°(PMP-30HTL / 30HTZL)
・Center Based Linearity : ±1%FS (X,Y axis）
【Material】
●Housing ：Aluminum
■Dimension [mm]
2012/12
2/2
■Output Characteristics ■Schematic ■Mounting
PMP-10HTL PMP-5HTL PMP-20HTL PMP-30HTL
【Model No.】
PMP-10HTZL PMP-5HTZL PMP-20HTZL PMP-30HTZL
【Electrical Specifications】 X and Y axis
Effective Electrical Tilt Angle ±10 ±5 ±20 ±30 °
Output Range 10 - 90 %Vin
Index Point 50±4 50±8 50±3 %Vin
Center Based Linearity ±1 ±1.5 %FS
Input Voltage DC 5±0.5 V
Load Resistance MIN. 10 kΩ
Supply Current MAX. 20 mA
Insulation Resistance MIN. 100/DC50V MΩ
Temp. Characteristics
At 0°: ±1.0° At 0°: ±1.0° At 0°: ±2.5° At 0°: ±2.5°
-20℃～80℃
At ±10°: ±1.5° At ±5°: ±1.5° At ±20°: ±2.5° At ±30°: ±3.0°
(Reference Temp. 25℃)
【Mechanical Specifications】
Response time Approx. 0.5 (Damper Oil 1000mm2/s) Sec.
Total Mechanical Tilt Angle MIN. ±12 MIN. ±6 MIN. ±24 MIN. ±36 °
Mass Approx.230 g
【Environmental Specifications】
Operating Temperature Range -20～+80 ℃
Storage Temperature Range -40～+80 ℃
Vibration 70m/s2 3 axis 2 hours
Shock 1000m/s2 6 directions 3 times
EMS 100V/m 200M ～1GHz
ESD(Case To Each Terminal) ±4 kV
ESD(Between Each Terminal) ±4 kV
IP Level IP65
■Options
・Different effective electrical tilt angle between X and Y axis (ex. X-axis=± 5°, Y-axis=±10°)
・Other dumper oil viscosity
・Narrower output voltage range
■Handling Instruction
・Hall-IC sensor is impossible to measure resistance value as a variable resistor.
・This product may be influenced from external magnetic field.
・Use this sensor in the place where is protected from ESD.
・ To avoid the spring pendulum bending, don't lay this unit on its side.
2012/12
