Scribd
Upload
86 views2 pages

CP-2HK Series: Dimension (MM)

This document summarizes the specifications of the CP-2HK Series of contactless Hall-IC angle sensors. The sensors have an effective electrical travel of ±40 degrees with options up to 360 degrees, and an absolute linearity of ±1% of full scale. They are available in models that accept 5V, 8V, or 10V input voltages. Additional specifications covered include dimensions, output characteristics, mounting, mechanical specifications like torque and thrust load tolerance, and environmental specifications.

Uploaded by

Gustavo Ybañez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views2 pages

CP-2HK Series: Dimension (MM)

This document summarizes the specifications of the CP-2HK Series of contactless Hall-IC angle sensors. The sensors have an effective electrical travel of ±40 degrees with options up to 360 degrees, and an absolute linearity of ±1% of full scale. They are available in models that accept 5V, 8V, or 10V input voltages. Additional specifications covered include dimensions, output characteristics, mounting, mechanical specifications like torque and thrust load tolerance, and environmental specifications.

Uploaded by

Gustavo Ybañez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1/2

Contactless Hall-IC Angle Sensor

CP-2HK Series
・ Contactless Hall-IC Angle Sensor
・ Effective Electrical Travel : ±40° (Option: 270°, 300°, 360°)
・ Absolute Linearity : ±1%FS (Independent Linearity: ±0.5%FS)
・ CP-2HK : Input Voltage DC5V±0.5V
・ CP-2HK-8R : Input Voltage DC8V±0.5V
・ CP-2HK-10R : Input Voltage DC10V±0.5V

【Material】
● Housing : Aluminum
● Shaft : Stainless Steel
● Ball Bearing : Stainless Steel
● Cover : Steel, Nickel Plate

■ Dimension (mm)

■ Output Characteristics ■ Schematic ■ Mounting

2013/8
2/2

【Model No.】 CP-2HK CP-2HK-8R CP-2HK-10R

Electrical Specifications

Effective Electrical Travel ±40° (Option: ±135°, ±150°, ±180°)


Output Range 10%~90%Vin
Absolute Linearity ±1％FS FS=80° (Independent Linearity: ±0.5%FS)
Input Voltage DC5V±0.5V DC8V±0.5V DC10V±0.5V
Load Resistance 10KΩ MIN.
Supply Current 11mA MAX. 13mA MAX.
Output Resolution 12bit
Hysteresis 0.1°　ＭＡＸ
Temp. Characteristics
@0°Position : ±0.5° @0°Position : ±0.8°
: -40~+100℃
(Reference Temp. 25℃)
＠±45°Position : ±0.5° ＠±45°Position : ±0.8°

Mechanical Specifications

Total Mechanical Travel 360° Endless


Torque 2mN・m MAX.
Thrust Load Tolerance 4N
Radial Load Tolerance 14N
Mass Approx. 65g

Environmental Specifications

Life Cycles 50 Million Cycle MIN.


Category Temperature Range -40 ~ +100 ℃
Storage Temperature Range -40 ~ +100 ℃
Vibration 1000m/S2 3axis 2hours each 5~500hz/6minutes
Shock 1000m/S2 3axis 6directions 3 times each
EMS 100V/m 200MHz~1GHz
ESD (Case to each terminal) ±12KV (IEC61000-4-2)
ESD (Between each terminal) ±12KV (IEC61000-4-2)
LP Level IP54 (Except shaft side from mounting surface)

■ Handling Instruction

・These products do not shielded with shaft bearing


・Do not use Hall-IC sensor as a variable resistor.
・This product may be influenced from external magnetic field.
・Use this sensor in the place where is protected from ESD.
・This model is available to remove mounting flange.

2013/8

You might also like