Conductive Plastic Angle Sensor
CP-45F Series CP-45F, CP-45FB
・Conductive Plastic Angle Sensor
・Prolonged lifetime - 50 Mil. Revolution min.
・Effective Electrical Travel : 350°
・Independent Linearity : ±0.1%
・Retio Output
・Servo Mount and Screw Mount
【Options】
・Shaft L2 side 0mm. (w/Screw driver slot)
・Additional Center Tap :
C.T(A) … No shorted angle
C.T(B) … Shorted on Tap (Shorted angle 3°approx.)
■Dimension [mm]
CP-45F
CP-45FB
2020/3
■Dimension [mm] Option : Shaft L2=0 type
CP-45F L2=0 CP-45FB L2=0
■Output Characteristics ■Schematic ■Mounting
Servo Mount Screw Mount
【Model No.】 ＣＰ-45F ＣＰ-45FB
(Shaft Φ4mm） (Shaft Φ6mm）
【Electrical Specifications】
Effective Electrical Travel 350 +3, -2 °
( Standard )1, 2, 5, 10
Total Resistance kΩ
(Option) 0.5, 20
Total Resistance Tolerance ±15 ％
Independent Linearity ±0.1 ％
Rated Dissipation 3/70℃ W
Output Smoothness MAX. 0.1 ％
Insulation Resistance MIN. 100/DC1000V ＭΩ
Dielectric Strength AC1000/1 Minute Ｖ
Temperature Coefficient of Resistance ±400 ppm/K
【Mechanical Specifications】
Total Mechanical Travel 360 Endless °
Torque MAX 1.8 mＮ・ｍ
Thrust Load Tolerance 2 N
Radial Load Tolerance 6 N
Mass 51 g
【Environmental Specifications】
Life Cycles 50 Million Cycle
Category Temperature Range -40～+120 ℃
Storage Temperature Range -40～+120 ℃
Vibration 200m/s2 2000Hz 3 axis 2 hours each
Shock 600m/s2 11ms 6 directions 3 times
2020/3
■Accessories
Mounting Cleats ： 3 pieces
■Handling Instruction
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
2020/3
