Scribd
Upload
41 views1 page

Toyota Ignition Timing Inspection Guide

1997 rav4 ignition timing inspection instructions

Uploaded by

dalton.j.q.green
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views1 page

Toyota Ignition Timing Inspection Guide

1997 rav4 ignition timing inspection instructions

Uploaded by

dalton.j.q.green
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EM−10

ENGINE MECHANICAL − IGNITION TIMING

TOYOTA IGNITION TIMING


Hand−Held Tester EM0EJ−01

INSPECTION
1. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
2. CONNECT TOYOTA HAND−HELD TESTER OR OBDII
SCAN TOOL
(a) Remove the fuse cover on the instrument panel.
S01354
(b) Connect the TOYOTA hand−held tester or OBDII scan
tool to the DLC3.
DLC1 (c) Please refer to the TOYOTA hand−held tester or OBDII
scan tool operator’s manual for further details.
3. CONNECT TIMING LIGHT TO ENGINE
TE1 SST
E1 4. INSPECT IGNITION TIMING
(a) Using SST, connect terminals TE1 and E1 of the DLC1.
SST 09843−18020

S01261

(b) Using a timing light, check the ignition timing.


Ignition timing:
8 − 12° BTDC @ idle
(Transmission in neutral position)
(c) Remove the SST from the DLC1.
SST 09843−18020
5. FURTHER CHECK IGNITION TIMING
Ignition timing:
S01272 0 − 10° BTDC @ idle
(Transmission in neutral position)
HINT:
The timing mark moves in a range between 0° and 10°
6. DISCONNECT TIMING LIGHT FROM ENGINE
7. DISCONNECT TOYOTA HAND−HELD TESTER OR
OBDII SCAN TOOL

Author: Date: 706

You might also like