List of Publications

Department of Mechanical Engineering

GMR Institute of Technology, (Autonomous)
Affiliated to JNTU-GV, Vizianagaram
Andhra Pradesh, India

Academic National National International International Books/books Total Cumulative

Year Conference Journal Conference Journal chapter Publications Publications
July 00 00 02 54 01 57 603
2023-June
2024
July 00 00 00 54 02 56 546
2022-June
23
2021-22 00 00 04 47 02 53 490
2020-21 00 00 01 55 07 63 437
2019-20 01 00 05 22 02 30 374
2018-19 04 00 03 31 00 38 344
2017-18 00 00 06 50 00 56 306
2016-17 01 00 05 40 00 46 250
2015-16 00 01 04 25 00 30 204
2014-15 00 00 07 23 00 30 174
2013-14 02 00 06 24 00 32 144
2012-13 04 00 08 17 00 29 112
2011-12 04 00 08 12 00 24 83
2010-11 02 00 06 04 00 11 59
2009-10 02 00 03 06 00 11 48
2008-09 00 00 04 00 00 04 37
2007-08 02 00 03 00 00 05 33
2006-07 07 00 04 00 00 11 28
2005-06 14 00 03 00 00 17 17
July 2023- June 2024:
International Conferences:

1. Sasikumar, G., Ayyappan, S., Sudhakar, U. (2023). Performance Analysis of 700 KW

Solar PV Grid-Connected System: An Empirical Study. In: Tripathy, S., Samantaray, S.,
Ramkumar, J., Mahapatra, S.S. (eds) Recent Advances in Mechanical Engineering.
ICRAMERD 2022. Lecture Notes in Mechanical Engineering., ISSN: 2195-4364, Q4,
https://doi.org/10.1007/978-981-19-9493-7_52
2. Bhowmik, A., Kumar, I., Venkatesh, V.S.S., Kaushal, S., Zabibah, R.S. and Gupta, M.,
2024. Study the wear behaviour of Al7075/SiC Composite utilizing the grey-based
Taguchi technique. In E3S Web of Conferences (Vol. 505, p. 01014). EDP Sciences.
Scopus indexed
International Journals:
1. Sasidhar Gurugubelli, Vinod Babu Chintada, and Rama Bhadri Raju Chekuri.
"Investigation on Mechanical Properties of Fabricated Aluminium 5000 Series using
Finite Element and Artificial Intelligence Methods." International Journal of Vehicle
Structures and Systems, ISSN: 0975-3540, Scopus, Q4, 15.2 (2023).
https://doi.org/10.4273/ijvss.15.2.07,
https://yanthrika.com/eja/index.php/ijvss/article/view/2570
2. Nimmagadda Vijaya Kumar, Shaik Ahammad Basha, Chitikena Chaitanya Kishore, Potli
Aswarthanarayana, Prathipati Pradeep Kumar, Marthati Maruthi Rao, Sajja Ravi Babu,
“Wear Analysis of Iron Slag Reinforced Polyester Composites with Taguchi
Optimization”, Ecological engineering and environmental technology, ISSN: 2719-7050,
Scopus, Q3, 24(6), pp. 221–229, https://doi.org/10.12912/27197050/168094,
http://www.ecoeet.com/pdf-168094-
92061?filename=Wear%20Analysis%20of%20Iron.pdf
3. Prashant Kumar Choudhary, “Free vibration analysis of stiffened plates”, European
Chemical Bulletin, ISSN: 2063-5346, Scopus, Q3, 12 (Special Issue 4), DOI:
10.48047/ecb/2023.12.si4.1656,
4. Gummaluri Venkata Surya Subrahmanya Sharma, “Postdigital concerns relating to
teaching and learning of machine drawing”, International Journal of Mechanical
Engineering Education, pp.1-21, ISSN: 0306-4190, Scopus, Q3, DOI:
10.1177/03064190231199248,
https://journals.sagepub.com/doi/abs/10.1177/03064190231199248
5. Pullapukuri, Kalyani, and Gopa Dinesh Reddy. "Dye Decolorization of Textile Dyes by
Using Aspergillus fumigatus Isolated from Marine Soil." Chemistry Africa (2023): 1-9.,
ISSN: 2522-5766, Scopus, Q3, https://doi.org/10.1007/s42250-023-00736-x,
https://link.springer.com/article/10.1007/s42250-023-00736-x
6. Gopa, Dinesh Reddy, L. S. V. Prasad, and Nirmith Kumar Mishra. "Improvement of load
bearing capacity by changing design parameters and material properties of journal
bearings utilized in marine applications." Materials Today: Proceedings (2023). ISSN:
2214-7853, Scopus, Q2, https://doi.org/10.1016/j.matpr.2023.03.208,
https://www.sciencedirect.com/science/article/abs/pii/S2214785323012506
7. Gupta, Sanjay Kumar, and Rahul Dev Misra. "Effect of Novel Cu@ ZnO Hybrid
Nanofluids on Pool Boiling Heat Transfer Performance." International Journal of
Thermophysics, ISSN: 0195-928X, SCIE, Q3, Vol.44, no. 9,
 https://doi.org/10.1007/s10765-023-03240-z,
https://link.springer.com/article/10.1007/s10765-023-03240-z
8. Rao, S. Chiranjeeva, K. Siva Prasad, and B. Ravi Sankar. "Analysis for tribological
behavior of ZnO nano emulsified biodiesel blends." International Journal of Energy,
Environment and Economics Vol.30, No. 1 (2022): pp. 97-108., ISSN: 1054-853X,
Scopus, Q3, https://novapublishers.com/shop/analysis-for-tribological-behavior-of-zno-
nano-emulsified-biodiesel-blends/
9. Marukurti V N V Satyanarayana, Bade Venkata Suresh, Durga Venkatesh Janaki and
Adepu Kumar, “Effect of overlapping technique on the grain size distribution and grain
orientation in friction stir processed aluminum alloys”, Proceedings of the institution of
mechanical engineers part L-journal of materials-design and applications, ISSN: 2041-
3076, SCIE, Q2, DOI: 10.1177/14644207231188703
10. Gupta, Sanjay Kumar, and Rahul Dev Misra. "Experimental Investigation on Flow
Boiling Heat Transfer Characteristics of Water Inside Micro/Nanostructured-Coated
Minichannel." International Journal of Thermophysics 44, no. 10 (2023): 148., ISSN:
1572-9567, SCIE, Q3, https://doi.org/10.1007/s10765-023-03256-5,
https://link.springer.com/article/10.1007/s10765-023-03256-5
11. Sanjay Kumar Gupta, Rahul Dev Misra, “Experimental pool boiling heat transfer analysis
through novel ZnO-coated Cu (Cu@ZnO nanoparticle) hybrid nanofluid boiling on the
fin tops of different microchannels”, Journal of Thermal Analysis and Calorimetry,
(2023), ISSN: 1588-2926, SCIE, Q1, https://doi.org/10.1007/s10973-023-12462-0,
https://link.springer.com/article/10.1007/s10973-023-12462-0
12. Rashmi, M., P. Satya Sagar, NSMP Latha Devi, V. B. Sreedhar, N. Gayatri Devi, and D.
T. Sakhare. "Analyzing performance of a solar water heater using nano-ZrO2/water-
based nanofluid." Materials Today: Proceedings (2023). ISSN: 2214-7853, Scopus, Q2,
https://doi.org/10.1016/j.matpr.2023.09.012,
https://www.sciencedirect.com/science/article/abs/pii/S2214785323046710
13. Prithiviraj C, Bappa Mondal, Sivarethinamohan. R, Senthil Kumar M, Optimization of
Pilot scale Biogas Plant for mixed food wastes with cow dung by anaerobic digestion
process, Global NEST Journal, ISSN:1790-7632, Vol. 25, pp. 1-9 (2023), Web of Sc
(Q3) Link: https://journal.gnest.org/publication/gnest_05253
14. Bappa Mondal, B. Vamsi Krishna, Development and performance study of self-charging
ecofriendly drone - a short review, China Petroleum Processing and Petrochemical
Technology, ISSN: 1008-6234, Vol. 23(2), (2023) pp. 2205-2212, (SCIE) Q3. Link:
https://zgsyjgysyhgjs.cn/index.php/reric/article/view/2-2205.html
15. T.R. Vijaybabu, K. Anirudh, Dadi Venkata Surya, “Significance of a permeable semi-
circular body and magnetic field on the double-diffusive traits”, International Journal of
Thermofluids, ISSN: 2666-2027, SSCI, Q1, https://doi.org/10.1016/j.ijft.2023.100486,
https://www.sciencedirect.com/science/article/pii/S266620272300201X
16. Y. Shireesha, V. Rajesh, Yenda Srinivasa Rao, Ganimisetti Srinivasa Rao, “Synthesis,
structural, magnetic properties and DC electrical resistivity of Cr3+ substituted Mg-Ni
ferrites”, Inorganic Chemistry Communications, SCIE, ISSN: 1879-0259,
https://doi.org/10.1016/j.inoche.2023.111585
17. Vinod Babu Chintada, Thirumala Rao Gurugubelli, Ravindranadh Koutavarapu, “The
impact of surfactants on the properties of electroless Ni–P–SiC coatings”, Materials
Chemistry and Physics, ISSN: 0254-0584, SCIE, Q1,
 https://doi.org/10.1016/j.matchemphys.2022.126682,
https://www.sciencedirect.com/science/article/abs/pii/S0254058422009889
18. Gupta S.K., Misra R.D., “Effect of dense packed micro-/nano-porous thin film surfaces
developed by a combined method of etching, electrochemical deposition and sintering on
pool boiling heat transfer performance”, Heat and Mass Transfer, ISSN: 1432-1181, Q2,
https://doi.org/10.1007/s00231-023-03438-9,
https://link.springer.com/article/10.1007/s00231-023-03438-9
19. Chiranjeeva Rao Seela, Balaji Krushna Potnuru and Vinod Babu Chintada ‘Analysis of
hybrid nano-emulsified Jatropha methyl ester-diesel blend (B20) in a direct injection
engine: an experimental study, Global Nest Journal, VOL 25( 9), pp 77-81 , GLOBAL
NEST publications, 2023, https://doi.org/10.30955/gnj.005277 , ISSN: 1790-7632 / 1108-
4006 , Impact Score 1.15, SJR: 0.272, Q3, Abbreviation Glob. Nest J. Greece SCIE
20. Gokulan Ravindiran, Sivarethinamohan Rajamanickam, Karthick Kanagarathinam,
Gasim Hayder, Gorti Janardhan, Priya Arunkumar, Sivakumar Arunachalam, Abeer A.
AlObaid, Ismail Warad, Senthil Kumar Muniasamy, “Impact of air pollutants on climate
change and prediction of air quality index using machine learning models”,
Environmental Research, ISSN: 1096-0953, SCIE, Q1,
https://doi.org/10.1016/j.envres.2023.117354,
https://www.sciencedirect.com/science/article/abs/pii/S0013935123021588.
21. Janardhan, Gorti, Prabhu Paramasivam, and Seshathiri Dhanasekaran. "Enhancing
Mechanical Performance of TiO2 Filler with Kevlar/Epoxy based hybrid composites in
Cryogenic Environment: A Statistical Optimization Study using RSM and ANN
Methods." Frontiers in Materials, ISSN: 2296-8016, SCIE, Q2,
https://doi.org/10.3389/fmats.2023.1267514,
https://www.frontiersin.org/articles/10.3389/fmats.2023.1267514/full
22. Sasikumar, Gnanasekaran, K. Mujiburrahman, R. Subhashini, and S. Sabarunisha
Begum. "IoT enabled solar-powered grass cutter utilizing radiant solar energy." Journal
of Integrated Science and Technology, Volume 12, Issue no. 3, pp. 1-6, ISSN: 2321-
4635, Scopus, Q3,
https://pubs.thesciencein.org/journal/index.php/jist/article/view/a759/487
23. Sasikumar G., Sivasangari A., Ravibabu S., “Wastewater Treatment Technologies
Selection Using Analytical Hierarchy Process and VIKOR Methods: A Case Study”,
Nature Environment and Pollution Technology, Vol. 22, No. 4, pp. 2209-2214, ISSN:
0972-6268, Scopus, Q4, https://neptjournal.com/upload-images/(48)B-4061.pdf
24. Gummaluri Venkata Surya Subrahmanya Sharma, Annepu Lakshumu Naidu, Korada
Santa Rao, Bade Venkata Suresh, Pankaj Kumar, Yegireddi Shireesha, Kambala
Simhadri, Sasidhar Gurugubelli, Bappa Mondal, Uppada Sudhakar, Prashant Kumar
Choudhary, Gopa Dinesh Reddy, Gorti Janardhan, Kattela Siva Prasad, Chintada Vinod
Babu, Sajja Ravi Babu, Seela Chiranjeeva Rao, Puvvada Naga Lakshmi Pavani, Matta
Vykunta Rao, Thappali Rajendran Vijaybabu, Meesala Srinivasa Rao, Velamala
Rambabu, Gnanasekaran Sasikumar & Chilamkurti Lakshmi Venkata Ranga
Sobhanachala Vara Prasad, “Bridging the Industry–Academia Gap: An Experiential
Learning for Engineering Students”, Journal of Formative Design in Learning, Volume 7,
pp. 139–157, ISSN: 2509-8039, non-scopus, ESCI, https://doi.org/10.1007/s41686-023-
00086-4, https://link.springer.com/article/10.1007/s41686-023-00086-4
25. Gupta S.K., Misra R.D., “Experimental study on flow boiling heat transfer augmentation
of novel zinc oxide coated copper hybrid nanofluids”, Proceedings of the Institution of
Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, ISSN: 2041-
2983, SCIE, Q2, https://journals.sagepub.com/doi/abs/10.1177/09544062231213203
26. Vijaybabu, T. R. "Significance of a permeable semi-circular body and magnetic field on
thermo-solutal natural convection and irreversibilities." International Communications in
Heat and Mass Transfer, ISSN: 1879-0178, SCIE, Q1,
https://doi.org/10.1016/j.icheatmasstransfer.2023.107202,
https://www.sciencedirect.com/science/article/pii/S0735193323005912
27. Gupta, Sanjay Kumar, and Rahul Dev Misra. "Role of ZnO-nano-thin-film-layered
micro/nanostructured surfaces on flow boiling heat transfer characteristics." Journal of
Thermal Analysis and Calorimetry, pp. 1-15, ISSN: 1588-2926, SCIE, Q1,
https://doi.org/10.1007/s10973-023-12766-1,
https://link.springer.com/article/10.1007/s10973-023-12766-1
28. Gupta, Sanjay Kumar, and Rahul Dev Misra. "Role of ZnO-nano-thin-film-layered
micro/nanostructured surfaces on flow boiling heat transfer characteristics." Journal of
Thermal Analysis and Calorimetry, pp. 1-15, ISSN: 1588-2926, SCIE, Q1,
https://doi.org/10.1007/s10973-023-12766-1,
https://link.springer.com/article/10.1007/s10973-023-12766-1
29. Chiranjeeva Rao Seela, Balaji Krushna Potnuru and Vinod Babu Chintada ‘Analysis of
hybrid nano-emulsified Jatropha methyl ester-diesel blend (B20) in a direct injection
engine: an experimental study, Global Nest Journal, VOL 25( 9), pp 77-81 , GLOBAL
NEST publications, 2023, https://doi.org/10.30955/gnj.005277 , ISSN: 1790-7632 / 1108-
4006 , Impact Score 1.15, SJR: 0.272, Q3, Abbreviation Glob. Nest J. Greece SCIE
30. Sasikumar, Gnanasekaran, K. Mujiburrahman, R. Subhashini, and S. Sabarunisha
Begum. "IoT enabled solar-powered grass cutter utilizing radiant solar energy." Journal
of Integrated Science and Technology, Volume 12, Issue no. 3, pp. 1-6, ISSN: 2321-
4635, Scopus, Q3,
https://pubs.thesciencein.org/journal/index.php/jist/article/view/a759/487
31. Vijaybabu, T. R. "Significance of a permeable semi-circular body and magnetic field on
thermo-solutal natural convection and irreversibilities." International Communications in
Heat and Mass Transfer, ISSN: 1879-0178, SCIE, Q1,
https://doi.org/10.1016/j.icheatmasstransfer.2023.107202,
https://www.sciencedirect.com/science/article/pii/S0735193323005912
32. Marukurti V N V Satyanarayana, Bade Venkata Suresh, Durga Venkatesh Janaki and
Adepu Kumar, “Effect of overlapping technique on the grain size distribution and grain
orientation in friction stir processed aluminum alloys”, Proceedings of the institution of
mechanical engineers part L-journal of materials-design and applications, ISSN: 2041-
3076, SCIE, Q2, DOI: 10.1177/14644207231188703
33. Gurugubelli S., Kesava Rao V.V.S., “Fatigue life of super duplex stainless steel sheets
(UNS S32750) as influenced by micro plasma arc welding parameters: an investigation
using the surface response method”, International Journal on Interactive Design and
Manufacturing, ISSN: 1955-2505 , Scopus, Q2, https://doi.org/10.1007/s12008-023-
01732-8, https://link.springer.com/article/10.1007/s12008-023-01732-8
34. Venkata Suresh B., Srinivasa Rao G., Yadav Mudi R., Balaji Gupta Tiruveedhi V.L.N.,
“Exploration of the structural, magnetic, and DC electrical resistivity characteristics of
 nanoparticles consisting of Sm3+ substituted NiCuZn spinel ferrite”, Inorganic
Chemistry Communications, ISSN: 1879-0259, SCIE,
https://doi.org/10.1016/j.inoche.2023.111850,
https://www.sciencedirect.com/science/article/pii/S1387700323014624
35. Shanmugam S.K.M., Muthusamy S., Ramasamy R.K., Alagumalai A., “Towards
improved performance and lower exhaust emissions using exhaust gas recirculation
coupled compression ignition engine fuelled with nanofuel blends”, Energy Sources, Part
A: Recovery, Utilization and Environmental Effects, ISSN: 1556-7230, SCIE, Q2,
https://doi.org/10.1080/15567036.2022.2038734,
https://www.tandfonline.com/doi/abs/10.1080/15567036.2022.2038734
36. Gupta, Sanjay Kumar. " Experimental subcooled flow boiling instability and heat
transfer analysis through zinc oxide coated copper hybrid nanofluid boiling on the
structured microchannels." Chemical Engineering and Processing - Process
Intensification, pp. 109691, SCIE, Q1, https://doi.org/10.1016/j.cep.2024.109691,
https://www.sciencedirect.com/science/article/abs/pii/S0255270124000308.
37. Gupta, Sanjay Kumar, Misra, Rahul Dev. “Effect of dense packed micro-/nano-porous
thin film surfaces developed by a combined method of etching, electrochemical
deposition and sintering on pool boiling heat transfer performance.” Heat and Mass
Transfer, 60, 281–303 (2024). SCIE, Q2, https://doi.org/10.1007/s00231-023-03438-9
https://link.springer.com/article/10.1007/s00231-023-03438-9#citeas

38. Simhadri K., Rao P.S., Paswan M. Improving the combustion and emission performance
of a diesel engine with TiO2 nanoparticle blended Mahua biodiesel at different injection
pressures, Volume 21, February 2024, 100563, Scopus Q1
https://doi.org/10.1016/j.ijft.2024.100563
https://www.sciencedirect.com/science/article/pii/S2666202724000053

39. Kumar A.S., Kumar S., Choudhary P.K., Gupta A., Narayan A.. " Free vibration
characteristics of elastic foundation-supported porous functionally graded nanoplates
using Rayleigh-Ritz approach." International Journal of Structural Integrity, Vol. ahead-
of-print No. ahead-of-print. ISSN 1757-9864 ESCI, Q2. https://doi.org/10.1108/IJSI-11-
2023-0114
40. Gupta, Sanjay Kumar Experimental Study on the Flow Boiling (Two-Phase) Heat
Transfer of High-Density Micro-/Nano-Porous Copper-Alumina-Copper Nano-
composite-Coated Surfaces. Arab J Sci Eng (2024). https://doi.org/10.1007/s13369-024-
08846-5 (SCI, Q1) https://doi.org/10.1007/s13369-024-08846-5
https://link.springer.com/article/10.1007/s13369-024-08846-5#citeas
41. Gupta, S.K., Misra, R.D. Role of ZnO-nano-thin-film-layered micro/nanostructured
surfaces on flow boiling heat transfer characteristics. J Therm Anal Calorim 149, 1267–
1281 (2024). (SCI, Q1) https://doi.org/10.1007/s10973-023-12766-1
https://link.springer.com/article/10.1007/s10973-023-12766-1#citeas
42. Mondal, B., Patowari, P.K. and Pati, S., 2024. Numerical and experimental investigations
of mixing length in square wave serpentine micromixer with obstacles. Microsystem
Technologies, pp.1-11. (SCI, Q2) https://doi.org/10.1007/s00542-024-05629-8
https://link.springer.com/article/10.1007/s00542-024-05629-8
43. Prasad, K. Siva, S. Srinivasa Rao, and V. R. K. Raju. "Numerical investigation for
enhancing HCCI combustion characteristics in DI-CI engine fueled with butanol/diesel
 blends." Journal of Engineering Research (2023). (SCI, Q3)
https://doi.org/10.1016/j.jer.2023.10.030
https://www.sciencedirect.com/science/article/pii/S2307187723002900
44. Gokulan Ravindiran, Gorti Janardhan, Sivarethinamohan Rajamanickam, Sujatha
Sivarethinamohan, V. Murali, Gasim Hayder, Study on hydrogeochemical assessment,
groundwater quality index for drinking, seawater mixing index and human health risk
assessment of nitrate and fluoride, Groundwater for Sustainable Development, Volume
25, 2024, 101161, ISSN 2352-801X,https://doi.org/10.1016/j.gsd.2024.101161.
(https://www.sciencedirect.com/science/article/pii/S2352801X24000845) SC1 Q1
45. Natrayan, L., Janardhan, G., Nadh, V.S. et al. Eco-friendly zinc oxide nanoparticles
from Moringa oleifera leaf extract for photocatalytic and antibacterial applications. Clean
Techn Environ Policy (2024). https://doi.org/10.1007/s10098-024-02814-1 SC1 Q1
46. Gummaluri Venkata Surya Subrahmanya Sharma. "Establishing machining process
standards in educational scenario—A study in an institutional machine tools laboratory
environment" International Journal of Mechanical Engineering Education, pp. 1-12,
Scopus, Q3, https://doi.org/10.1177/03064190241245661,
https://journals.sagepub.com/doi/abs/10.1177/03064190241245661
47. Dev, A., Mondal, B., Verma, V.K., Kumar, V., “Teaching learning optimization-based
sliding mode control for frequency regulation in microgrid”, Electrical Engineering,
ISSN: 1432-0487, SCIE, Q2, https://doi.org/10.1007/s00202-024-02422-8
48. Seela, C.R., Kalabarige, L.R., Kattela, S.P., “Machine learning-based modeling of
variable compression ratio engine performance and emissions with JME-ZnO
nanoemulsion”, Energy Sources, Part A: Recovery, Utilization and Environmental
Effects, ISSN: 1556-7230, SCIE, Q2, https://doi.org/10.1080/15567036.2024.2346159
49. Sharma, G.V.S.S., Rao, M.S., Rambabu, V., Prasad, M.S.A., “Process capability study of
domestic organic waste composting process – a pilot scale case study in rural India”,
International Journal of Environment and Waste Management, ISSN: 1478-9868, ESCI
and Scopus, Q3, https://doi.org/10.1504/IJEWM.2024.137946
50. Gupta, S.K., Misra, R.D., “Experimental study on flow boiling heat transfer
augmentation of novel zinc oxide coated copper hybrid nanofluids”, Proceedings of the
Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,
SCIE, ISSN: 2041-2983, Q2, https://doi.org/10.1177/09544062231213203
51. Venkata Suresh, B., Seshagiri Rao, G.V.R., Nirmala Devi, E., Nandipati, G., “Effect of
Cr3+ substitution on the structural and magnetic properties of Co-Cu-Zn nano ferrites”,
Inorganic Chemistry Communications, SCIE, ISSN: 1879-0259, Quartile not shown
(Elsevier publications), https://doi.org/10.1016/j.inoche.2024.112534
52. Uppada S., Koona R., Chintada V., “A study on the microhardness and corrosion
behavior of the ZnO and SiC reinforced multi layer electroless nickel coating”,
Australian Journal of Mechanical Engineering, ISSN: 1448-4846, Scopus, Q3,
https://doi.org/10.1080/14484846.2022.2133402
53. Ravi Babu S., Pradeep Kumar P., Sasikumar G., Basha S.A., “Thermophysical properties
of MWCNT-Alumina/water nanofluid and their influence on the performance of free
convection heat transfer”, International Journal of Advanced Technology and
Engineering Exploration, ISSN: 2394-7454, Scopus, Q3,
http://dx.doi.org/10.19101/IJATEE.2023.10102112
 54. Sharma G.V.S.S., Vara Prasad C.L.V.R.S., Santa Rao K., “Post-COVID-19 era: An
Enabler for the Implementation of Blended Learning in Compliance With the NEP
2020”, International Journal of Educational Reform, ISSN: 1056-7879, Scopus, Q3,
https://doi.org/10.1177/10567879221112059
Books/Book Chapters:

1. Kumar, S., Gupta, A., Shanmukhasundaram, V.R., Srivastava, J.P., Choudhary, P.

“Determining the accurate free vibration response of thin functionally graded plates using
the dynamic stiffness method”, Functionally Graded Structures: Modelling and
computation of static and dynamical problems, Online ISBN: 978-0-7503-5301-4,
August, 2023, Scopus, doi:10.1088/978-0-7503-5301-4ch10, Chapter 10, pp. 1-31

July 2022-June 2023:

International Journals:

1. Chiranjeeva Rao. Seela “ CARBON NANOTUBES (MWCNTs) ADDED BIODIESEL

BLENDS: AN ENGINE ANALYSIS”, Rasayan Journal of Chemistry, Vol. 15, No. 2,
pp. 1009-1020 (ISSN: 0976-0083) (2022), (Indexed in : Scopus), Q2,
http://rasayanjournal.co.in/admin/php/upload/3567_pdf.pdf
2. Vykunta Rao M, Suresh B V, Vinod Babu Ch., “Investigation of the Impact of Vibrations
on the Fatigue Behaviour of Al 5052 Alloy Weldments”, International Journal of
Mechanical Engineering, Vol. 7, Special Issue 5, April 2022, pp. 79-84, (ISSN 0974-
5823), (Indexed in : Scopus), Not yet assigned Quartile,
https://kalaharijournals.com/resources/Special_Issue_April_11.pdf
3. K Santarao, Munmun Bhaumik, Prasad C L V R S V "SURFACE IMPROVEMENT OF
AISI D3 STEEL EMPLOYING SiC BLENDED DIELECTRIC IN ELECTRIC DIE
SINKING PROCESS" International Journal of Modern Manufacturing Technologies,
Vol. XIV, no. 1, 2022, pp 75-80, ISSN 2067–3604, (Indexed in : Scopus), Q3,
https://www.ijmmt.ro/vol14no12022/09_Korada.pdf
4. Sasidhar Gurugubelli and V.V.S. Kesava Rao, “Investigation on Effect of Pulsed Current
Micro Plasma Arc Weld Parameters on UNS S32750 Super Duplex Stainless Steel
Sheets”, International Journal of Modern Manufacturing Technologies, Vol. XIV, No. 1,
(2022), pp. 64-74, ISSN 2067–3604, (Indexed in : Scopus), Q3,
https://www.ijmmt.ro/vol14no12022/08_Gurugubelli.pdf
5. V Rambabu, M Jaya Krishna, A Lakshumu Naidu, “Tribological Behaviour of Biodiesel
and Metal Oxide Nanoparticles as Alternative Lubricant: A Pin-on-Disc Tribometer and
Wear Study”, Journal of Positive School Psychology, Vol. 6, No. 5, pp. 2066-2074, ISSN
: 2717-7564, Q2
6. Gummaluri Venkata Surya Subrahmanya Sharma, Chilamkurti Lakshmi Venkata Ranga
Sobhanachala Vara Prasad, Korada Santa Rao, “Post-COVID-19 era: An Enabler for the
Implementation of Blended Learning in Compliance With the NEP 2020”, International
Journal of Educational Reform, pp. 1-13 (ISSN: 1056-7879) (2022), (Indexed in :
Scopus), Q3, https://journals.sagepub.com/doi/full/10.1177/10567879221112059

7. Avinash Alagumalai, Wan Shouc, Omid Mahian, Mortaza Aghbashlo, Meisam

Tabatabaei, Somchai Wongwises, Yong Liu, Justin Zhan, Antonio Torralb, Jun Chen,
 ZhongLin Wang, Wojciech Matusik, “Self-powered Sensing Systems with Learning
Capability”, (ISSN: 2542-4351) Joule 2022. (Indexed in : SCIE) , Q1,
https://www.sciencedirect.com/science/article/abs/pii/S2542435122002483

8. Puvvada, N. L. P., & Ronanki, P., “Fabrication of micro electrode array using WEDM”,
International Journal of Health Sciences, 6(S1), pp. 12586–12595 (ISSN: 2550-6978)
(2022), (Indexed in : Scopus), Not yet assigned Quartile,
https://media.neliti.com/media/publications/430978-fabrication-of-micro-electrode-array-
usi-49b028a9.pdf

9. Naga Lakshmi Pavani Puvvada, Polarao Ronanki, Srikiran Satuluri, “Experimental Study
and Optimization of Tribological Properties of Blended Biodiesel”, Recent Advances in
Manufacturing Modelling and Optimization, Lecture Notes in Mechanical Engineering,
pp. 411-425 (ISSN: 2195-4356), (Indexed in : Scopus), Q4,
https://link.springer.com/chapter/10.1007/978-981-16-9952-8_36

10. Gorti Janardhan, Krishna Dutta, Goutam Mukhopadhyay, “Influence of Work Hardening
on Tensile and Fatigue Behavior of Resistance Spot-Welded Dual-Phase Steel”, Journal
of Materials Engineering and Performance, (2022), (ISSN: 1059-9495), Q2, (Indexed in :
SCIE) https://link.springer.com/article/10.1007/s11665-022-07117-4

11. Gnanasekaran Sasikumar, Sivasangari Ayyappan, N. Venkatachalam, “Evaluation of

Preventive Activities of COVID-19 Using Multi-criteria Decision Making Method”,
Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering,
pp. 221-226 (ISSN: 2195-4346), (Indexed in : Scopus), Q4,
https://link.springer.com/chapter/10.1007/978-981-16-9057-0_24

12. Sasikumar, G. and Sivasangari, A., “Multi-criteria decision-making for solar panel
selection using an integrated analytical hierarchy process and VIKOR approach: a case
study”, Int. J. Business Information Systems, Vol. 40, No. 2, pp.285–298, (ISSN: 1746-
0972), (Indexed in : Scopus), Q2,
https://www.inderscienceonline.com/doi/abs/10.1504/IJBIS.2022.123625

13. Bade, Venkata Suresh, Yenda Srinivasa Rao, Shireesha Yegireddi, and Girma Eshete.
"Influence of Nano Boric Acid Material in Bio-Diesel Blends to Enhance the Surface
Quality with Minimum Quality Lubrication." Advances in Materials Science and
Engineering, pp. 1-10 (ISSN: 1687-8442) (2022) (Indexed in: SCIE), Q2,
https://www.hindawi.com/journals/amse/2022/3819774/

14. Uppada, Sudhakar, Ramji Koona, Vinod Babu Chintada, and Ravindranadh Koutavarapu.
"Influence of Heat Treatment on Crystal Structure, Microhardness and Corrosion
Resistance of Bilayer Electroless Ni-P-SiC/Ni-P-Al2O3 Coatings." Silicon, pp. 1-11.
(ISSN: 1876-9918) (2022) (Indexed in: SCIE), Q2,
https://link.springer.com/article/10.1007/s12633-022-02042-6
15. Vinod Babu Chintada, Thirumala Rao Gurugubelli, Ravindra Kotavarapu, “Impact of
Surfactant on the Properties of the Electroless Ni-P-SiC Coatings”, Materials Chemistry
and Physics, Volume 291. (ISSN: 0254-0584) (Indexed in: SCI), Q2,
(https://www.sciencedirect.com/science/article/abs/pii/S0254058422009889?via%3Dihub
)
16. A. Lakshmu Naidu, M. Jaya Krishna, V. Rambabu, “Evaluation of Mechanical Behaviour
of 3D Printed Structures using FDM Process”, International Journal of Performability
Engineering”, vol. 18, no. 9, September 2022, pp. 637-643, (ISSN : 0973-1318) (Indexed
in Scopus), Q4, (http://www.ijpe-online.com/EN/10.23940/ijpe.22.09.p4.637643)

17. Alagumalai, A., Yang, L., Ding, Y., Marshall, J.S., Mesgarpour, M., Wongwises, S.,
Rashidi, M.M., Taylor, R.A., Mahian, O., Sheremet, M. and Wang, L.P., “Nano-
engineered pathways for advanced thermal energy storage systems”, Cell Reports
Physical Science, (ISSN: 2666-3864), (Indexed in: SCIE), Q1,
https://doi.org/10.1016/j.xcrp.2022.101007, (impact factor: 7.8)

18. Alagumalai, A., Mahian, O., Vimal, K.E.K., Yang, L., Xiao, X., Saeidi, S., Zhang, P.,
Saboori, T., Wongwises, S., Wang, Z.L. and Chen, J., “A contextual framework
development toward triboelectric nanogenerator commercialization”, Nano Energy,
(ISSN: 2211-2855), (Indexed in: SCIE), Q1,
https://doi.org/https://doi.org/10.1016/j.nanoen.2022.107572, (impact factor: 19)

19. Gnanasekaran Sasikumar, A. Sivasangari, “Solar panel selection using an integrated

analytical hierarchy process and multi-objective optimisation by ratio analysis: an
empirical study”, International Journal of Industrial and Systems Engineering, Volume
42, No. 1, pp. 64-79, (ISSN: 1748-5045), (Indexed in: Scopus), Q3,
(https://www.inderscienceonline.com/doi/abs/10.1504/IJISE.2022.126018?journalCode=i
jise)

20. Sudhakar Uppada, Ramji Koona, VinodBabu Chintada, “A study on the microhardness
and corrosion behavior of the ZnO and SiC reinforced multi layer electroless nickel
coating”, Australian Journal of Mechanical Engineering, pp. 1-12, (ISSN: 1448-4846),
(Indexed in: Scopus), Q3,
(https://www.tandfonline.com/doi/abs/10.1080/14484846.2022.2133402)

21. T. R. Vijaybabu, Karthik Babu N.B., “Significance of porous elliptical cylinder on the
MHD natural convection”, International Journal of Mechanical Sciences, (ISSN: 0020-
7403), (Indexed in: SCIE), Q1,
(https://www.sciencedirect.com/science/article/abs/pii/S0020740322006725)

22. Bappa Mondal, Debayan Mondal, Ambarish Maji, Performance Analysis and Recent
Study of Powder Mixed EDM and Powder Mixed Wire-EDM –A
Review, NeuroQuantology, (2022), Volume 20, Issue 15, pp 5656-5669, (ISSN: 1303-
5150), (Indexed in: Scopus), Q3, DOI: 10.14704/NQ.2022.20.15.NQ88569
23. Ambarish Maji, Bappa Mondal, Debayan Mondal, A Brief Review on the Machinability
of Micro EDM, Wire cut-EDM, and Die Sink EDM, NeuroQuantology, (2022), Volume
20, Issue 15, pp 5648-5655, (ISSN: 1303-5150), (Indexed in: Scopus), Q3, DOI:
10.14704/NQ.2022.20.15.NQ88568

24. Dr. B. V. Suresh, Radi Jashwanth, “Review on Hydroelectric Power

Plants”, International Journal of Research Publication and Reviews, (2022), Volume 3,
Issue 11, pp 1142-1155, (ISSN: 2582-7421), (Indexed in: Non-Scopus),
https://ijrpr.com/uploads/V3ISSUE11/IJRPR7878.pdf

25. G. D. Reddy, L. S. V Prasad, and P. K. Sarma, “Effect of transition and eccentricity ratios
on load bearing ability and speed in journal bearings utilized in marine propulsion
systems Effect of Transition and Eccentricity Ratios on Load Bearing Ability and Speed
in Journal Bearings Utilized in,” AIP Conf. Proc., vol. 2648, no. November, pp. 020010–
1 to 020010–14, 2022, (ISSN: 1551-7616) (Indexed in: Scopus) (Not yet assigned
Quartile) DOI: https://doi.org/10.1063/5.0114592

26. Sasidhar Gurugubelli, Sai Krishna Kuna and Kaveri, ‘ANALYSIS OF PISTON
FAILURE: A REVIEW’ International Research Journal of Modernization in
Engineering Technology and Science (IRJMETS), Volume:04/Issue:11/November-2022.
(Indexed in: Non-Scopus), https://www.doi.org/10.56726/IRJMETS31022

27. Gopa, Dinesh Reddy and Pullapukuri, Kalyani. "Green synthesis of silver nanoparticles
from Aspergillus flavus and their antibacterial performance" Chemical Product and
Process Modeling, 2023, pp. 1-8, ISSN : 1934-2659, Scopus indexed,Q4,
https://doi.org/10.1515/cppm-2022-0054
28. V. S. S. Venkatesh, Kalapala Prasad and Lokeswar Patnaik, “Effect of SiC and TiC
Reinforcements on the Mechanical Properties of ZrB2‑SiC‑ TiC Hybrid Composite
Fabricated Through Spark Plasma Sintering”, Silicon, Q1, pp. 1-13, ISSN: 1876-9918,
Dec. 2022, (SCIE ans Scopus) https://doi.org/10.1007/s12633-022-02263-9
29. Hanumanthu Sai Santosh, M. Srinivasa Rao, “Advanced Soft Computing
Tools/Optimization Techniques Used For the Analysis of Metal Matrix Composite
Materials”, Journal of Recent Activities in Production, Vol. 7, Issue 3, ISSN: 2581-9771,
pp. 24-36, (non-scopus) http://matjournals.co.in/index.php/JoRAP/article/view/1307
30. Srikiran, S., P. N. L. Pavani, and Kumaran Palani. "Modeling of Nanolubricant-Assisted
Machining Process by using Multiple Regression Analysis." Journal of Nanomaterials
2023,Q2, Article ID 3669399, pp. 1-12, ISSN : 1687-4129, Scopus indexed
https://doi.org/10.1155/2023/3669399
31. Seela Chiranjeeva Rao, Ravi Sankar B “Assessment of Al2O3-JME nano emulsion
blends influence on Variable Compression Ratio”, International Journal of Energy,
Environment, and Economics, Vol.29 Issue.3, 2022, pp.303-312, ISSN : 1054-853X,
Scopus indexed, Q4, https://novapublishers.com/shop/assessment-of-al2o3-jme-nano-
emulsion-blends-influence-on-variable-compression-ratio-engine/
32. Bade Venkata Suresh, Yegireddi Shireesha, Teegala Srinivasa Kishore, Gaurav Dwivedi,
Ali Torabi Haghighi, Epari Ritesh Patro, “Natural energy materials and storage systems
for solar dryers: State of the art”, Solar Energy Materials and Solar Cells, pp. 1-24, ISSN
 : 0927-0248, SCIE indexed, Q1,
https://www.sciencedirect.com/science/article/pii/S0927024823000971
33. Gummaluri Venkata Surya Subrahmanya Sharma, “Spatial visualization for development
of visual thinking and cognitive abilities among mechanical engineering students through
tool design ideation”, International Journal of Mechanical Engineering Education, pp. 1-
16, ISSN : 2050-4586, Scopus indexed, ESCI, Q2,
https://journals.sagepub.com/doi/abs/10.1177/03064190231164049
34. Dr.M.Vykunta Rao, N.Devika, P.Stephen Daniel, P.Srikanth, R.Sanjay, S.Sravani,
“Advancments in the Production and Properties of Aluminum Metal Matrix Composites
: A Review of Stir Casting Route and Parametric Effects”, Industrial Engineering Journal,
Vol.52/No.3, pp539-550, ISSN: 0970-2555, UGC CARE Group-1.
35. Dr.G.Sasi Kumar, R.Manikanta, N.Praveen Kumar, N.Lakshman, S.Rajeesh, M.Vijay, ”
Design and Fabrication of Solar Grass Cutter Using Arduino”, Industrial Engineering
Journal, Vol.52/No.3, ISSN: 0970-2555, UGC CARE Group-1.
36. Dr.A.Lakshmu Naidu, R.Daniprasheel, P.Mani Murali, V.Somasekhar, P.Siva Kiran,
S.D.V.M.Srinivasa Reddy, V.Jaya Kumar, “A Review on Fabrication and Printing of
Metal-Polymar Composite Filaments”, European Chemical Bulletin, Q3, Vol.12/No.3,
pp327-345, ISSN: 2063-5346, Scopus
37. P. Gowri Sankar, Simhachalam. T, P. Ganesh, P. Sai Krishna Dileep, Ch. Vinay Aditya,
S. Nikesh, Dr. G. Janardhan, “Design and Fabrication of agricultural pesticide sprayer
machine”, Industrial Engineering Journal, Vol.52/No.3, pp. 164-170, ISSN: 0970-2555,
UGC CARE Group-1
38. -G. Sasi Kumar, G. Nagaraju, D. Rohith and A. Vasudevarao, “Design and Development
of Smart Irrigation System Using Internet of Things (IoT) - A Case Study”, Nature
Environment and Pollution Technology, Vol. 22, Issue 1, 2023, pp. 523-526, ISSN:
2395-3454, Scopus indexed, Q4, https://doi.org/10.46488/NEPT.2023.v22i01.052,
https://neptjournal.com/upload-images/(52)B-3942.pdf
39. K. Simhadri, P. Srinivasa Rao, M.K. Paswan, “Effect of changing injection pressure on
Mahua oil and biodiesel combustion with CeO2 nanoparticle blend on CI engine
performance and emission characteristics”, International Journal of Hydrogen Energy,
pp.1-16, ISSN: 0360-3199, SCIE, Q1, https://doi.org/10.1016/j.ijhydene.2023.03.267,
https://www.sciencedirect.com/science/article/abs/pii/S0360319923013903
40. Venkatesh, V.S.S., Prasad, K., Deoghare, A.B., “Characterization of microwave sintered
aluminium composite reinforced with hydroxyapatite extracted from rihu fish scales”,
Archives of Metallurgy and Materials, Vol. 68, Issue 2, 2023, pp.617-624, ISSN : 1733-
3490, Scopus indexed, Q3, DOI: https://doi.org/10.24425/amm.2023.142442,
https://www.imim.pl/files/archiwum/Vol2_2023/26.pdf
41. Venkatesh, Sunil Kumar, K., Lokeswar Patnaik, “Susceptor-Assisted Rapid Microwave
Sintering of Al-Kaolin Composite
A. in a Single-Mode Cavity”, Archives of Metallurgy and Materials, Vol. 68, Issue
2, 2023, pp.799-806, ISSN : 1733-3490, Scopus indexed, Q3, DOI:
https://doi.org/10.24425/amm.2023.142464,
https://www.imim.pl/files/archiwum/Vol2_2023/48.pdf
42. Vavilada Satya Swamy Venkatesh, Rajamalla Narasimha Rao, “Influence of microwave
sintering temperatures on mechanical and microstructural Behavior of Al/SiC/snail shell
hybrid composite synthesized through powder metallurgy technique”, Proceedings of the
institution of mechanical engineers part c-journal of mechanical engineering science,
pp.1-12, ISSN: 0954-4062, SCIE, Q2, https://doi.org/10.1177/09544062231169120,
https://journals.sagepub.com/doi/abs/10.1177/09544062231169120
43. T. R. Vijaybabu, T. Ramesh, Suman Pandipati, Sujit Mishra, G Sridevi, C Pradeep Raja,
Rhoda Afriyie Mensah, Oisik Das, Manjusri Misra, Amar Mohanty,and Karthik Babu
NB, “High Thermal Conductivity Polymer Composites Fabrication through Conventional
and 3D Printing Processes: State-of-the-Art and Future Trends”, Macromolecular
Materials and Engineering, ISSN: 1439-2054, SCIE, Q1,
https://doi.org/10.1002/mame.202300001,
https://onlinelibrary.wiley.com/doi/full/10.1002/mame.202300001
44. Burada Jyothi, Marpina Akhila, Ganta Abhishek, Gollangi Shanmukharao, Boddanam
Narendra Kumar, Deverakonda Rohith, Dr.C.L.V.R.S.V Prasad, “Development of Steer-
By-Wire Electronic Automotive Steering System”, European Chemical Bulletin, ISSN:
2063-5346, Scopus indexed, Q3, DOI: 10.31838/ecb/2023.12.1.097,
https://www.eurchembull.com/uploads/paper/dcc4e63a1704a91fe7c71a8833917eba.pdf

45. V. Rambabu, Kottakota Chandramouli, Karri Pavan Kumar, Vommu Venkata Lokendra
Mukesh, Gudivada Sai Yeswanth, Mugada Venkatesh Kiran, Illa Pavan, “A Review on
Biodiesel Production from Jatropha Oil and Its Characterization Techniques”, European
Chemical Bulletin, ISSN: 2063-5346, Scopus indexed, Q3, DOI:
10.31838/ecb/2023.12.1.0372023.21/04/2023 ,
https://www.eurchembull.com/uploads/paper/fc062ff214020e6d001587459234a001.pdf

46. V.S.S. Venkatesh, Ganji Prabhakara Rao , Lokeswar Patnaik, Nakul Gupta, Sunil Kumar,
Kuldeep K. Saxena, B.D.Y. Sunil, Sayed M. Eldin, Fatima Hiader Kutham Al- kafaji,
“Processing and evaluation of nano SiC reinforced aluminium composite synthesized
through ultrasonically assisted stir casting process”, Journal of Materials Research and
Technology, ISSN: 2238-7854, SCIE, Q1, https://doi.org/10.1016/j.jmrt.2023.05.030,
https://www.sciencedirect.com/science/article/pii/S223878542300995X

47. Dr. M. Srinivasa Rao, Dr. PSV. Narayana, “Preparation and characterization of a novel
natural fiber based composite for dental implants”, Journal of Pharmaceutical Negative
Results, ISSN: 2229-7723, Scopus indexed, Not yet assigned quartile, DOI:
https://doi.org/10.47750/pnr.2023.14.03.273,
blob:https://www.pnrjournal.com/e59cb385-c529-4724-b9a6-308f464d1bcd

48. Alagumalai, A., Devarajan, B., Song, H., Wongwises, S., Ledesma-Amaro, R., Mahian,
O., Sheremet, M. and Lichtfouse, E., “Machine learning in biohydrogen production: a
review”, Biofuel Research Journal, 10(2), ISSN: 2292-8782, ESCI and Scopus indexed,
 Q1, pp.1844-1858, DOI: 10.18331/BRJ2023.10.2.4,
https://www.biofueljournal.com/article_172023.html

49. Sharma, G.V.S.S. and Kumar, S., “Thinking Through Art–A creative insight into
mechanical engineering education”, Thinking Skills and Creativity, ISSN: 1871-1871,
SSCI, Q1, p.101341, https://doi.org/10.1016/j.tsc.2023.101341,
https://www.sciencedirect.com/science/article/abs/pii/S1871187123001104

50. Babu, S.R., Kumar, P.P., Basha, S.A. and Rao, M.M., “Experimental Investigation on
Free Convective Heat Transfer Performance of Oxide Nanofluids Along a Vertical
Cylinder”, Ecological engineering & environmental technology, 24(5), pp.185-194,
ISSN: 2719–7050, ESCI and Scopus, Q3, https://doi.org/10.12912/27197050/165902,
http://www.ecoeet.com/Experimental-Investigation-on-Free-Convective-Heat-Transfer-
Performance-of-Oxide,165902,0,2.html

51. Gupta, S.K. and Misra, R.D., 2023, “Experimental Pool Boiling Heat Transfer Analysis
with Copper–Alumina Micro/Nanostructured Surfaces Developed by a Novel
Electrochemical Deposition Technique”, International Journal of Thermophysics, 44(7),
p.112, ISSN: 1572-9567, SCIE, Q3, https://doi.org/10.1007/s10765-023-03218-x,
https://link.springer.com/article/10.1007/s10765-023-03218-x

52. Puvvada, N.L.P., Ronanki, P. & Gupta, M.S., “Enhancement of heat dissipation capacity
with the application of nano fluids in an internal cooling system”, International Journal
on Interactive Design and Manufacturing, ISSN: Scopus, Q2
https://doi.org/10.1007/s12008-023-01321-9,
https://link.springer.com/article/10.1007/s12008-023-01321-9

53. Prashant Kumar Choudhary, “Optimal design of composite cylindrical shells subject to
compression buckling strength”, Multidiscipline Modeling in Materials and Structures,
ISSN: 1573-6105, 5 June 2023, SCIE and scopus, Q3, https://doi.org/10.1108/MMMS-
11-2022-0269, https://www.emerald.com/insight/content/doi/10.1108/MMMS-11-2022-
0269/full/html

54. Venkatesh, V.S.S., Rao, R.N. & Patnaik, L., “Effect of Spark Plasma Sintering
Temperature on Phase Evaluation and Mechanical Behaviour of cu- 4 Wt% SiC
Composite.”, Silicon (May 2023), ISSN: 1876-9918, SCIE, Q2,
https://doi.org/10.1007/s12633-023-02530-3,
https://link.springer.com/article/10.1007/s12633-023-02530-3
2022-23:
Books/Book Chapters:

1. Vykunta Rao, M., Kothakota Purushotham, and M. V. A. Raju Bahubalendruni.

"Artificial Neural Network Model for the Evaluation of Tensile Strength of Vibratory-
Assisted TIG Welded Aluminium Weldments." In Recent Trends in Product Design and
Intelligent Manufacturing Systems, Lecture Notes in Mechanical Engineering, (ISBN:
978-981-19-4606-6) (Indexed in: Scopus) pp. 693-700., Q4, Springer, Singapore, 2023,
https://link.springer.com/chapter/10.1007/978-981-19-4606-6_63

2. Vinod Babu Chintada, Sudhakar Uppada, and M. ykunta Rao. "Comparative Study on
Microhardness of the Electroless ZnO ans SiC Reinforced Ni-P Coatings." In Recent
Trends in Product Design and Intelligent Manufacturing Systems, Lecture Notes in
Mechanical Engineering, (ISBN: 978-981-19-4606-6) (Indexed in: Scopus) pp. 471-477.,
Q4, Springer, Singapore, 6 oct 2022, https://link.springer.com/chapter/10.1007/978-981-
19-4606-6_44

--------------------------------------------------------------------------------------------------------------------

2021-22:
International Conferences:

1. Santarao K., Suresh Ch., Prasad C.L.V.R.S.V., “Application of Taguchi Procedure to

Decide Optimum Variable Levels for Powder Blended EDM”, First International
Conference on Future Technologies in Manufacturing, Automation, Design and
Energy, Organized by Department of Mechanical Engineering National Institute Of
Technology Puducherry, 28 - 30 December 2020.
2. Vinod Babu Chintada, Sasidhar Gurugubelli and Sudhakar Uppada, “ Review on
Materials and Method Used to Develop Antimicrobial Coatings in Medical and
Food Processing Industry”, Recent Advances in Manufacturing, Automation, Design
and Energy Technologies, Proceedings from ICOFT 2020, Lecture Notes in Mechanical
Engineering, Q4, Springer Nature Singapore Pte Ltd. 2022. Pp. 57-63. (Indexed by
SCOPUS) https://doi.org/10.1007/978-981-16-4222-7_7
3. Fathimunnisa Begum, Sasidhar Gurugubelli and N. Ravi Kumar, “ Observational
Exposition of Metal Matrix Composite Aluminum 6069 (Al) Fraction Variance
Strengthened with Molybdenum (Mo) and Coconut Shell Ash (CSA)”, Recent
Advances in Manufacturing, Automation, Design and Energy Technologies, Proceedings
from ICOFT 2020, Lecture Notes in Mechanical Engineering, Q4 Springer Nature
Singapore Pte Ltd. 2022. Pp. 105-113. (Indexed by SCOPUS)
https://doi.org/10.1007/978-981-16-4222-7_12
4. Vykunta Rao, M., Raju Bahubalendruni, M. V. A., & Chintada, V. B. (2022). “General
Regression Neural Network-Based Frame Work for the Evaluation of Ultimate
Tensile Strength of Vibratory-Assisted Welded Joints”, Recent Advances in
 Manufacturing, Automation, Design and Energy Technologies, pp. 173-180, Springer,
Singapore

2021-22:
International Journals:

1. M Moorthi, A Murugesan, Avinash Alagumalai, “Enhancement of fuel properties of

Manilkara zapota biodiesel blend by doping green-synthesized silver nanoparticles”,
Applied Nanoscience. September 2021 (ISSN: 2190-5517) (Indexed in : SCIE and
scopus) (Impact factor: 3.7) (https://link.springer.com/article/10.1007/s13204-021-02088-
9) Q2
2. Sasidhar Gurugubelli, Rama Bhadri Raju Chekuri, T.Rajasanthosh Kumar, “The Method
Combining Laser Welding and Induction Heating at High Temperatures was
Performed”, Design Engineering, Vol. No. 2021, Issue No. 5, pp. 592-602, May 2021.
(ISSN No. : 0011-9342) (Indexed in : scopus, coverage discontinued) (Impact Factor: No
Impact Factor) (http://www.thedesignengineering.com/index.php/DE/article/view/1569)
3. D. Srinivasa kumar, A. T. Ramprasad, "Working capital management a proxy to
examine firm profitability: Evidence from Indian housing finance companies".
Turkish Journal of Physiotherapy and Rehabilitation, Vol. No. 32, Issue No. 2, May
2021. (ISSN No.: 2651-4451) (Indexed in: Scopus), Q4, (Impact Factor: No. Impact
Factor) (https://turkjphysiotherrehabil.org/pub/pdf/322/32-2-384.pdf)
4. Dr. V. Rambabu, A. Lakshumu Naidu, “Study on the Effect of Inclination Angle on
Heat Transfer Enhancement of a Ferrofluid and Kerosene in a Closed Loop
Oscillating Heat Pipe”, Turkish Journal of Computer and Mathematics Education, Vol.
No. 12, No. 11, pp. 4895-4910, May 2021 ( ISSN No.: 1309-4653) (Indexed in: Scopus)
(Impact Factor: No. Impact Factor) (https://dergipark.org.tr/en/pub/turkbilmat)
5. Ambarish Maji, Tuhin Deshamukhya, Gautam Choubey, Anupam Choubey,
‘Performance evaluation of perforated pin fin heat sink using particle swarm
optimization and MCDM techniques’, Journal of Thermal Analysis and Calorimetry,
2021, pp. 1-18. (ISSN No. 1388-6150) (Indexed in Scopus and SCI), Q1, (Impact Factor:
2.471) (https://link.springer.com/article/10.1007/s10973-021-10872-6)
6. Sanjay Kumar Gupta, Rahul Dev Misra, “Flow boiling performance analysis of copper-
titanium oxide micro-/nanostructured surfaces developed by single-step forced
convection electrodeposition technique”, Arabian Journal for Science and Engineering,
June 2021 (ISSN No.: 2193-567X) (Indexed in Scopus and SCI), Q1, (Impact Factor:
1.711 ) (https://link.springer.com/article/10.1007/s13369-021-05850-x)
7. Sasidhar Gurugubelli, V.V.S.KesavaRao, ‘Inclusive Review on Welding of Duplex
Stainless Steels’, Advances in Mechanical Engineering, Lecture Notes in Mechanical
Engineering, June, 2021, pp. 393-403. (ISSN No. 2195-4356) (Indexed in Scopus), Q4,
(https://doi.org/10.1007/978-981-16-0942-8_38)
8. Gummaluri Venkata Surya Subrahmanya Sharma, Chilamkurti Lakshmi Venkata Ranga
Sobhanachala Vara Prasad, Velamala Rambabu, “Online machine drawing pedagogy—
A knowledge management perspective through maker education in the COVID-19
pandemic era”, Knowledge and Process Management, 2021 ( ISSN No.: 1099-1441)
 (Indexed in: Scopus) (Impact Factor: No. Impact Factor)
(https://onlinelibrary.wiley.com/doi/epdf/10.1002/kpm.1684) SCIMago: Q3
9. Kakala Sanjeevarao, P.N.L. Pavani, Ch. Suresh, Pakanati Anil Kumar “Experimental
investigation on VCR diesel engine fuelled with Al 2O3 nanoparticles blended
cottonseed biodiesel - diesel blends”, Materials Today: Proceedings, 46, pp.301-306,
(ISSN No.: 2214-7853) (Indexed in: Scopus), Q2, (Impact Factor: No. Impact Factor)
(https://www.sciencedirect.com/science/article/pii/S2214785320359046) SCIMago: Not
yet assigned quartile
10. G.V.S.S. Sharma, P. Srinivasa Rao, B. Surendra Babu, “Establishing Process
Capability Indices in a Sugar Manufacturing Industry – an Industrial Engineering
Perspective”, Jordan Journal of Mechanical and Industrial Engineering, Vol. 15, No. 4,
pp. 319-328, ( ISSN No.: 1995-6665) (Indexed in: Scopus) (Impact Factor: No. Impact
Factor) (http://jjmie.hu.edu.jo/vol-15-4/01-jjmie_8_21.pdf) SCIMago: Q3
11. S. Ravi Babu, N.V.A Ravi Kumar, P. Ramesh Babu “Effect of moisture and sonication
time on dielectric strength and heat transfer performance of transformer oil based
Al2O3 nanofluid”, International Journal of Advanced Technology and Engineering
Exploration, Vol. 8, Issue 82, pp. 1222-1233, (ISSN No.: 2394-7454) (Indexed in:
Scopus), Q4,
(ImpactFactor:NoImpactFactor)(https://accentsjournals.org/PaperDirectory/Journal/IJAT
EE/2021/9/9.pdf) SCIMago: Not available
12. Avinash Alagumalai, Omid Mahian, Mortaza Aghbashlo, Meisam Tabatabaei, Somchai
Wongwises, Zhong Lin Wang, “Towards Smart Cities Powered by Nanogenerators:
Bibliometric and Machine Learning–Based Analysis”, Nano Energy, Vol. 83, Article
105844, May 2021. (ISSN No. 2211-2855)
(https://www.sciencedirect.com/science/article/abs/pii/S2211285521001026) (Indexed in
SCI) (Q1)
13. Vinod Babu Chintada, Ramji Koona, MVA Raju Bahubalendruni, “State of Art Review
on Nickel-Based Electroless Coatings and Materials”, Journal of Bio-and Tribo-
Corrosion, vol 7, no. 4. PP.1-14, 2021. (Indexed by SCOPUS) (Q2)
https://link.springer.com/article/10.1007/s40735-021-00568-7
14. Avinash Alagumalai, Caiyan Qin, KEK Vimal, Evgeny Solomin, Liu Yang, Ping Zhang,
Todd Otanicar, Alibakhsh Kasaeian, Ali J Chamkha, Mohmammad Mehdi Rashidi,
Somchai Wongwises, Ho Seon Ahn, Zhao Lei, Tabassom Saboori, Omid
Mahian, "Conceptual analysis framework development to understand barriers of
nanofluid commercialization", Nano energy, Vol. No.92 (ISSN: 2211-2855) (Indexed
in SCI) Q1 (https://doi.org/10.1016/j.nanoen.2021.106736)
15. Vijaybabu T. R. “Impression of porous body and magnetic field on the double-
diffusive mixed convection traits”, International Journal of Mechanical Sciences vol
215 (ISSN: 0020-7403) (2021): pp. 106955 (Indexed in SCI) Q1, I.F: 5.329,
(https://doi.org/10.1016/j.ijmecsci.2021.106955)
16. Dr. Chiranjeeva Rao Seela, “Optimization of Nano Emulsified Biodiesel
Lubricants”, Design Engineering, vol 2021, no. 9. PP.831-843, Dec2021 (Indexed by
SCOPUS, Q4, http://thedesignengineering.com/index.php/DE/article/view/7019)
17. Yegireddi.shireesha, Nandipati.govind “Optimization using response surface
methodology and artificial neural network in geared drilling” International Journal of
 Modern Manufacturing Technologies, vol XIII, no. 2. PP.116-123, December 2021
(Indexed by SCOPUS) Q3 https://www.ijmmt.ro/vol13no22021/14_Y_Shireesha_1.pdf
18. January 2022, Dr. M. Srinivasa Rao, Dr. CLVRSV Prasad, A Lakshumu Naidu, GVSS
Sharma, "Preparation and Characterization of a Novel Natural Fiber Based
Composite For Tribological Applications", International Journal of Mechanical
Engineering, Vol. 7, No. 1 (ISSN: 0974-5823) (Indexed in Scopus) Q4
(https://kalaharijournals.com/resources/301-320/IJME_Vol7.1_317.pdf)
19. T. Nagaraju, Dr. V. Rambabu, A Lakshumu Naidu, “The effect of different inclination
angles on heat transfer enhancement of ferrofluid in a closed helical loop oscillating
heat pipe under magnetic field”, Natural Volatiles and essential oils, vol 8, No. 4: pp.
4807-4823 (Indexed in Scopus) Q3
(https://www.nveo.org/index.php/journal/article/view/1069/966)
20. Govindarao Nammi, Dhrijit Kumar Deka, Sukumar Pati, Laszlo Baranyi “Natural
convection heat transfer within a square porous enclosure with four heated
cylinders”, Case Studies in Thermal Engineering, Volume 30, February 2022, 101733,
ISSN: 2214-157X, (Indexed by SCI),
Q1, (https://www.sciencedirect.com/science/article/pii/S2214157X21008960)
21. Gopal Chandra Pal, Govindarao Nammi, Sukumar Pati, Pitambar R. Randive, Laszlo
Baranyi, “Natural convection in an enclosure with a pair of cylinders under
magnetic field”, Case Studies in Thermal Engineering, Volume 30, February 2022,
101763, ISSN: 2214-157X, (Indexed by SCI) Q1
(https://www.sciencedirect.com/science/article/pii/S2214157X22000090)
22. V. Bhargava Linga Raju, A. Vijin Prabhu, “The performance, combustion and
emission analysis of Ci engine fueled with waste cooking oil biodiesel in addition of
graphene nanoparticles and isopropanol”, Natural Volatiles and essential oils, vol 8,
No. 4: pp. 4807-4823 (Indexed in Scopus) Q3
(https://www.nveo.org/index.php/journal/article/view/2848/2416)
23. Sajja Ravi Babu, K.P.V. Krishna Varma, Kunapuli Siva Satya Mohan, "Artificial Neural
Network Technique for estimating the thermophysical properties of Water-Alumina
nanofluid", Ecological Engineering & Environmental Technology, Vol. 23, No. 2, pp.
96–105, (ISSN : 2719-7050) (Indexed in Scopus) Q3, (http://www.ecoeet.com/Artificial-
Neural-Network-Technique-for-Estimating-the-Thermo-Physical-
Properties,145583,0,2.html)
24. Sasidhar Gurugubelli, Rama Bhadri Raju Chekuri, Ravi Varma Penmetsa,
“Experimental investigation and optimization of turning process of EN8 steel using
Taguchi L9 orthogonal array”, Materials Today: Proceedings, pp.1-5, (ISSN: 2214-
7853), (Indexed in scopus), Q2, (https://doi.org/10.1016/j.matpr.2022.01.474)
25. Balivada. Sai Bhushan Patnaik, C. L. V. R. S. V. Prasad, P. N. L. Pavani, “Simulation
study on impact of orientation in metal additive manufacturing on residual
stresses”, Journal of emerging technologies and innovative research, Vol. 9, No. 1, pp.
669-673, (ISSN: 2349-5162), (Quartile : No results found) (not indexed in scopus)
(https://www.jetir.org/view?paper=JETIR2201493)
26. O. Mohan Chandra Kumar, K.Simhadri, “Effect of Al2O3 nanoparticle blended Mahua
oil biodiesel combustion on performance and emission characteristics of CI
engine”, Nanotechnology for Environmental Engineering, (ISSN: 2365-6379) (Indexed
in Scopus) Q2 (https://link.springer.com/article/10.1007/s41204-022-00219-3)
27. O. Mohan Chandra Kumar, · K. Simhadri, “Exploration of mahua oil (Madhucaindica
seed oil) biodiesel as a fuel in compression ignition engine: A review”, Natural
Volatiles & Essential Oils, (Indexed in Scopus), Vol. 8, No. 4, pp- 11609-11627,
(ISSN:2148-9637), Q3 (https://www.nveo.org/index.php/journal/article/view/2394/2112)
28. Bo, L., Zhang, X., Luo, Z., Saboori, T., Dehghan, M., Ghasemizadeh, M., Karimi-Maleh,
H., Alagumalai, A., Mahian, O., 2021. "An overview of the applications of ionic fluids
and deep eutectic solvents enhanced by nanoparticles". J. Therm. Anal. Calorim.
February 2022 (ISSN: 1588-2926) (Indexed in : SCIE and scopus) Q2 (Impact factor:
4.6) https://doi.org/10.1007/s10973-021-11097-3;
29. Alagumalai, A., Qin, C., K E K, V., Solomin, E., Yang, L., Zhang, P., Otanicar, T.,
Kasaeian, A., Chamkha, A.J., Rashidi, M.M., Wongwises, S., Ahn, H.S., Lei, Z., Saboori,
T., Mahian, O., 2022. "Conceptual analysis framework development to understand
barriers of nanofluid commercialization". Nano Energy 92, 106736. February 2022
(ISSN: 2211-2855) (Indexed in : SCIE and scopus) (Impact factor: 17.8) Q1
https://doi.org/https://doi.org/10.1016/j.nanoen.2021.106736
30. Kalil Rahiman, M., Santhoshkumar, S., Subramaniam, D., Avinash, A., Pugazhendhi, A.,
2022. "Effects of oxygenated fuel pertaining to fuel analysis on diesel engine
combustion and emission characteristics". Energy. January 2022 (ISSN: 0360-5442)
(Indexed in : SCIE and scopus) (Impact factor: 7.147) Q1
https://doi.org/10.1016/j.energy.2021.122373
31. Moorthi, M., Murugesan, A., Alagumalai, A., 2022. "Effect of nanoparticles on DI-CI
engine characteristics fueled with biodiesel–diesel blends—A critical review". J.
Therm. Anal. Calorim. February 2022 (ISSN: 1588-2926) (Indexed in : SCIE and scopus)
(Impact factor: 4.6) Q2 https://doi.org/10.1007/s10973-022-11234-6
32. Shanmugam, S.K.M., Muthusamy, S., Ramasamy, R.K., Alagumalai, A., 2022.
"Towards improved performance and lower exhaust emissions using exhaust gas
recirculation coupled compression ignition engine fuelled with nanofuel blends".
Energy Sources, Part A Recover. Util. Environ. Eff. 0, 1–17. February 2022 (ISSN:
1556-7036) (Indexed in : SCIE and scopus) Q2 (Impact factor: 3.44)
https://doi.org/10.1080/15567036.2022.2038734
33. A. Lakshumu Naidu, V. Rambabu 2022. "Acoustic noise optimum analysis on home
appliances”, International Journal of Mechanical Engineering, Vol. 7, No.1, January
2022, pp. 7001-7010, (ISSN: 0974-5823) (Indexed in : scopus) Q4
https://kalaharijournals.com/resources/IJME_Vol7.1_742.pdf
34. Vinod Babu Chintada, Thirumala Rao Gurugubelli, Ravindra Kotavarapu, “An
investigation over the effect of the reducing agent on the properties of the ZnO-
reinforced Ni–P coatings”, Journal of Materials Science: Materials in Electronics, DOI:
https://doi.org/10.1007/s10854-021-07366-4. (Indexed by SCIE) Q2
https://link.springer.com/article/10.1007/s10854-021-07366-4
35. Gorti Janardhan, Goutam Mukhopadhyay, Krishna Dutta, “Failure mechanism of
resistance spot-welded DP600 steel under high cycle fatigue”, Materials Today:
Proceedings, Q2, https://www.sciencedirect.com/science/article/pii/S2214785322016649
36. Vykunta Rao, M., Raju Bahubalendruni, M. V. A., & Chintada, V. B. (2022). General
Regression Neural Network-Based Frame Work for the Evaluation of Ultimate
Tensile Strength of Vibratory-Assisted Welded Joints. In Recent Advances in
 Manufacturing, Automation, Design and Energy Technologies (pp. 173-180). Springer,
Singapore, Scopus indexed
37. Prasad, V. S. S., Anil Kumar Gulivindala, Sudhakar Uppada, Vykunta Rao Matta, M. V.
A. Raju Bahubalendruni, and B. B. Biswal. "A Design for Assembly Framework Based
on Subassembly Detection Method." In Recent Advances in Manufacturing Modelling
and Optimization, pp. 511-519. Springer, Singapore, 2022, scopus
38. Suresh, B.V., Shireesha, Y., Rao, P.S. (2022). Effect of Electrode Vibration Welding
on Impact and Tensile Strength of 1018 Mild Steel Weld Joints. In: Dave, H.K., Dixit,
U.S., Nedelcu, D. (eds) Recent Advances in Manufacturing Processes and Systems.
Lecture Notes in Mechanical Engineering. Springer, Q4,
Singapore. https://doi.org/10.1007/978-981-16-7787-8_26
39. Shireesha, Y., Nandipati, G. (2022). Experimental Study on Tensile Behavior of Tri-
axial Hybrid Fiber Composites. In: Dave, H.K., Dixit, U.S., Nedelcu, D. (eds) Recent
Advances in Manufacturing Processes and Systems. Lecture Notes in Mechanical
Engineering. Q4, Springer, Singapore. https://doi.org/10.1007/978-981-16-7787-8_40
40. A. Lakshumu Naidu, V. Rambabu, “A review on challenges in emergenceindustry 4.0
and education 4.0 in India”, Journal of Positive School Psychology, 2022, Vol.6, No.2,
pp. 6109-6117 (ISSN: 2717-7564) (Indexed in : Scopus) Q2,
https://journalppw.com/index.php/jpsp/article/view/3936
41. Sumit Kumar Mehta, Bappa Mondal, Sukumar Pati, Promod Kumar Patowari,
“Enhanced electroosmotic mixing of non-Newtonian fluids in a heterogeneous
surface charged micromixer with obstacles”, Colloids and Surfaces A:
Physicochemical and Engineering Aspects, 2022, (ISSN: 1873-4359) (Indexed in: SCIE
and scopus) Q2,
https://www.sciencedirect.com/science/article/abs/pii/S0927775722009700
42. Gorti Janardhan, Goutam Mukhopadhyay, Krishna Dutta, “Failure behaviour of Spot-
welds on automotive steel sheets”, Materials Today: Proceedings, 2022, (ISSN: 2214-
7853) (Indexed in Scopus) Q2,
https://www.sciencedirect.com/science/article/pii/S2214785322032916
43. Chiranjeeva Rao. Seela “ CARBON NANOTUBES (MWCNTs) ADDED BIODIESEL
BLENDS: AN ENGINE ANALYSIS”, Rasayan Journal of Chemistry, Vol. 15, No. 2,
pp. 1009-1020 (ISSN: 0976-0083) (2022), (Indexed in : Scopus), Q2,
http://rasayanjournal.co.in/admin/php/upload/3567_pdf.pdf
44. Vykunta Rao M, Suresh B V, Vinod Babu Ch., “Investigation of the Impact of Vibrations
on the Fatigue Behaviour of Al 5052 Alloy Weldments”, International Journal of
Mechanical Engineering, Vol. 7, Special Issue 5, April 2022, pp. 79-84, (ISSN 0974-
5823), (Indexed in : Scopus), Not yet assigned Quartile,
https://kalaharijournals.com/resources/Special_Issue_April_11.pdf
45. K Santarao, Munmun Bhaumik, Prasad C L V R S V "SURFACE IMPROVEMENT OF
AISI D3 STEEL EMPLOYING SiC BLENDED DIELECTRIC IN ELECTRIC DIE
SINKING PROCESS" International Journal of Modern Manufacturing Technologies,
Vol. XIV, no. 1, 2022, pp 75-80, ISSN 2067–3604, (Indexed in : Scopus), Q3,
https://www.ijmmt.ro/vol14no12022/09_Korada.pdf
46. Sasidhar Gurugubelli and V.V.S. Kesava Rao, “Investigation on Effect of Pulsed Current
Micro Plasma Arc Weld Parameters on UNS S32750 Super Duplex Stainless Steel
Sheets”, International Journal of Modern Manufacturing Technologies, Vol. XIV, No. 1,
 (2022), pp. 64-74, ISSN 2067–3604, (Indexed in : Scopus), Q3,
https://www.ijmmt.ro/vol14no12022/08_Gurugubelli.pdf
47. V Rambabu, M Jaya Krishna, A Lakshumu Naidu, “Tribological Behaviour of Biodiesel
and Metal Oxide Nanoparticles as Alternative Lubricant: A Pin-on-Disc Tribometer and
Wear Study”, Journal of Positive School Psychology, Vol. 6, No. 5, pp. 2066-2074, ISSN
: 2717-7564, Q2

2021-22:
Books/Book Chapters:

1. M. Sai Baba, Pankaj Kumar, and G. Sireesh Kumar, ‘A Review on Pulse Tube
Refrigerator’, Advances in Mechanical Engineering, Lecture Notes in Mechanical
Engineering, First Online 27 June, 2021, pp. 433-445. (ISBN No. 978-981-16-0942-8)
(Indexed in Scopus), Q4, (https://link.springer.com/chapter/10.1007%2F978-981-16-
0942-8_42)
2. V. Rambabu, A. Lakshumu Naidu and Srinivas Kona, “Analysis of Mechanical and
Thermal Bahavior of Sisal Fibre Composites: Review”, Chapter 2, Recent Advances in
Materials Sciences, Lecture Notes on Multidisciplinary Industrial Engineering, Chapter 2,
pp. 17-26, (https://link.springer.com/chapter/10.1007/978-981-13-7643-6_2)

--------------------------------------------------------------------------------------------------------------------

2020-21:

2020-21:
National Conferences:
-----------NIL-----------

2020-21:
National Journals:
-------------NIL------------

2020-21:
International Conferences:

1. S.SatyaPrasad, V.Rambabu, S.Ravibabu, “Experimental Investigation of Radiator

HeatTransfer Efficiency using Water + Ethylene Glycol based Al2O3, SiC Nanofluids”,
IOP Conference Series: Materials Science and Engineering, ICMME 2020, Vol. 954, No.1,
p. 012031, November 2020. (ISSN No. 1757-899X)
 (https://iopscience.iop.org/article/10.1088/1757-899X/954/1/012031/pdf) (Indexed in:
Scopus)

2020-21:
International Journals:

1. Sanjay Kumar Gupta, Rahul Dev Misra, “Flow boiling heat transfer performance of
copper-alumina micro-nanostructured surfaces developed by forced convection
electrodeposition technique”, Chemical Engineering and Processing: Process
Intensification, Vol. No. 164, p.108408, April 2021. (ISSN No. : 0255-2701) (Indexed in :
SCI and scopus) (Impact Factor: 3.731) Q1
(https://www.sciencedirect.com/science/article/abs/pii/S0255270121001100)
2. Sushanth H. Gowda, A. Avinash, K. Raju, Production optimization of Vateria Indica
biodiesel and performance evaluation of its blends on compression ignition engine”,
Sustainable chemistry and policy, Vol. 22, April 2021. (ISSN: 2352-5541) (Indexed in
SCIE)
3. Fan Fangfang, Avinash Alagumalai, Omid Mahian, “Sustainable biodiesel production
from waste cooking oil: ANN modeling and environmental factor assessment”,
Sustainable energy technologies and assessment, Vol. 46, April 2021. (ISSN: 2213-1388)
(Indexed in SCIE) (Q1)
4. Prabhu, A.V., Alagumalai, A. & Jodat, A. "Artificial neural networks to predict the
performance and emission parameters of a compression ignition engine fuelled with
diesel and preheated biogas–air mixture". J Therm Anal Calorim (2021). (ISSN
No.:1588-2926) Mar 2021 (Indexed in: SCI & Scopus) (Impact Factor: 2.731)
(https://link.springer.com/article/10.1007/s10973-021-10683-9) Q2
5. Avinash Alagumalai, OmidMahian, Frank Hollman, Wuyuan Zhang, “ Environmentally
benign solid catalysts for sustainable biodiesel production: A critical review”, Science
of the total environment, Vol. 768, Feb 2021. ISSN: 0048-9697 (Indexed in SCI) (Q1)
6. February 2021 Vinay Sai Kumar Devarapu, S. Ranganathan, “Numerical Model and
Simulation of Photovoltaic Cell Heat Transfer Performance Integrated with PCM”,
Shankar S., Rajeshkumar G. (Eds) Materials, Design, and Manufacturing for Sustainable
Environment, Lecture Notes in Mechanical Engineering. Springer, Singapore.
https://doi.org/10.1007/978-981-15-9809-8_43, (ISSN:2195-4356) (7th Feb 2021) (Indexed
in Scopus) Q4 (https://link.springer.com/chapter/10.1007/978-981-15-9809-8_43)
7. Vijin Prabhu A., Sivaram A.R., Prabhu N., Sundaramahalingam A., “A Study of Enhancing
the Biogas Production in Anaerobic Digestion”, Materials Today: Proceedings, 2021,
(ISSN No.: 2214-7853) (13th Feb 2021) (Indexed in: Scopus), Q2
(https://www.sciencedirect.com/science/article/pii/S2214785320407278)
8. Dec 2020 A.Vijin Prabhu, S.Antony Raja, A.Avinash, Arivalagan Pugazhendhi,
"Parametric Optimization of Biogas Potential in Anaerobic Co-Digestion of Biomass
Wastes", Fuel, 119574, December 2020, (ISSN No.:0016-2361) (Impact Factor: 5.578)
(https://doi.org/10.1016/j.fuel.2020.119574) (Indexed in: SCI & Scopus) (Q1-Fuel
Technology)
9. Chintada Vinodbabu, G. Thirumala Rao, N. Bakthavatchala Reddy, and Grigory V.
Zyryanov, “A Review on Magnetron Sputter Coatings”, AIP Conference Proceedings,
 Volume 2280, Issue-1, ISSN: 0094-243X, E-ISSN:1551-7616.
(https://aip.scitation.org/doi/10.1063/5.0018142) (Indexed in : Scopus)
10. Baba, M. Sai, and Pankaj Kumar. "Analysis of Inertance Pulse Tube Refrigerator using
CFD" IOP Conference Series: Materials Science and Engineering, Vol. 954, Issue 1, IOP
Publishing, 2020. (ISSN No. 1757-8981), E-ISSN:1757-899X (Impact Factor: 0.6)
(https://iopscience.iop.org/article/10.1088/1757-899X/954/1/012049/meta) (Indexed in
Scopus)
11. Dec 2020 Bade, V.S., P., S.R. and P., G.R. (2020), "The Effect of Vibratory Conditioning
on Tensile Strength and Microstructure of 1018 Mild Steel", World Journal of
Engineering, Vol. 17 No. 6, pp. 837-844, December 2020. (ISSN: 1708-5284) Q3
https://doi.org/10.1108/WJE-07- 2020-0296
(https://www.emerald.com/insight/content/doi/10.1108/WJE-07-2020-
0296/full/html?skipTracking=true) (Indexed in: Scopus) (Q3-Mechanica Engineering)
12. Nov 2020 Vinod Babu Chintada, Sudhakar Uppada, Rakesh Chandmal Sharma, “Properties
of the
Multi Layer Electroless Ni-P-ZnO/Ni-P-SiC Coatings”, Journal of Critical Reviews, Vol.
7, Issue 19, pp. 268-271, August 2020 (ISSN No. 2394-5125)
(http://jcreview.com/fulltext/197-1600429928.pdf?1605845747) (Indexed in Scopus)
13. C.L.V.R.S.V. Prasad, G.V.S.S. Sharma, P.N.L. Pavani, “Capability Resurrection of DC
Sputtering Machine: A Case Study”, International Journal of Surface Engineering and
Interdisciplinary Materials Science (IJSEIMS), Vol. No. 9, Issue No. 1, pp. 60-76,
November 2020. (ISSN No. 2166-7233) (https://www.igi-global.com/article/capability-
resurrection-ofdc-sputtering-machine/267212) (Indexed in Scopus) Q4
14. Nazrul Islam Khan, Sudipta Halder, Subhankar Das, Manjeet S. Goyat, “Graphitic
Nanoparticles Functionalized with Epoxy Moiety for Enhancing the Mechanical
Performance of Hybrid Carbon Fiber Reinforced Polymer Laminated Composites”,
Polymer Composites, pp 1-15, Accepted for Publication in November 2020 (ISSN No.
1548-0569 (https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.25857) (Indexed in: SCI) Q2
15. Chiranjeeva Rao Seela, Avinash Alagumalai, Arivalagan Pugazhendhi, “Evaluating the
Feasibility of Diethyl Ether and Isobutanol added Jatropha Curcas Biodiesel as
Environmentally Friendly Fuel Blends”, Sustainable Chemistry and Pharmacy, Accepted
for Publication in November 2020 (ISSN No. 2352-5541)
(https://www.sciencedirect.com/science/article/abs/pii/S2352554120305799) (Indexed in:
SCI) Q2
16. R Satya Santosh Uday, K Simhadri, “Performance and Emission Characteristics of Four
Stroke Diesel Engine Using Sesame Biodiesel Blends with Addition of TiO2 Nano-
Particles”, IOP Conference Series: Materials Science and Engineering, pp 1-14, Accepted
for Publication in November 2020 (ISSN No. 0025-5416)
(https://iopscience.iop.org/article/10.1088/1757-899X/954/1/012032/pdf) (Indexed in:
Scopus)
17. Sudhakar Uppada, Subbarama Kousik Suraparaju, M. V. A. Raju Bahubalendruni and
Sendhil Kumar Natarajan, “Optimization of Process Parameters in Resistance Spot
Welding Using Artificial Immune Algorithm”, pp 477-485, Lecture Notes in Mechanical
Engineering, Select Proceedings of ICIPDIMS 2019, pp. 477-485, Accepted for Publication
in November 2020 (ISSN 2195-4364) (https://link.springer.com/chapter/10.1007/978-981-
15-2696-1_47) (Indexed in Scopus) Q4
18. Nov 2020 Vinod Babu Chintada , Ramji Koona & Thirumala Rao Gurugubelli,
“Investigation on Microhardness and Corrosion Resistance of ZnO Reinforced Ni-P
Composite Coatings at Various Annealing Temperatures”, Advances in Materials and
Processing Technologies, pp
1-15, Accepted for Publication in November 2020 (ISSN No. 2374-0698)
(https://www.tandfonline.com/doi/abs/10.1080/2374068X.2020.1835017) (Indexed in
Scopus and ESCI) Q2
19. Oct 2020 Nazrul Islam Khan, Sudipta Halder, Nabajyoti Talukdar, Subhankar Das, M.S.
Goyat, “Surface Oxidized/Silanized Graphite Nanoplatelets for Reinforcing an Epoxy
Matrix”, Materials Chemistry and Physics, Vol. 258, 123851, pp. 1-12, January 2021.
(https://www.sciencedirect.com/science/article/abs/pii/S0254058420312104) (ISSN No.
0254-0584) (Indexed in: SCI) Q2
20. M. Vykunta Rao, Srinivasa Rao P., B Surendra Babu, “Vibratory Weld Conditioning
during Gas Tungsten Arc Welding of Al5052 Alloy on the Mechanical And Micro-
Structural Behavior”, World Journal of Engineering, Vol. 17, Issue 6, pp. 831-836
(https://www.emerald.com/insight/content/doi/10.1108/WJE-06-2020-0211/full/html) (ISSN
No. 1708-5284) (Indexed in: Scopus) Q3
21. U.Sudhakar, J.Srinivas, M V A Raju Bahubalendruni, “Tensile Behaviour
Characterization of AA5251-AA6063 Joint prepared through Friction Stir Welding
Process”, International Journal of Emerging Trends in Engineering Research, Vol. 8, Issue
9, pp. 5624-5629, October 2020. (ISSN No. 2347-3983)
(http://www.warse.org/IJETER/static/pdf/file/ijeter116892020.pdf) (Indexed in: Scopus)
22. Oct 2020 A. Vijin Prabhu, A. Avinash, Kathirvel Brindhadevi, Arivalagan Pugazhendhi,
“Performance and Emission Evaluation of Dual Fuel CI Engine using Preheated
Biogas-Air Mixture”, Science of the Total Environment, Vol. 754, 142389, pp 1-9, To be
published in February 2021 (ISSN No. 0048-9697)
(https://www.sciencedirect.com/science/article/abs/pii/S0048969720359180) (Indexed in
SCI) Q1
23. Sept 2020 A. Avinash, P. Sasi Kumar, Arivalagan Pugazhendhi, “Analysis of the Limiting
Factors for Large Scale Microalgal Cultivation: A Promising Future for Renewable
and Sustainable Biofuel Industry”, Renewable and Sustainable Energy Reviews, Vol. 134,
pp. 1-9, (ISSN No. 1364-0321) (Indexed in : SCI)
(https://www.sciencedirect.com/science/article/abs/pii/S1364032120305396) Q1
24. D. Srinivasa Rao, Ch. Rajasekhar, K. Santa Rao, “A Study on Covid-19 Situation in
Andhra Pradesh: Current Scenario and Projections”, International Journal of Current
Research and Review, Vol. 12, Issue 17, pp. 45–50, (ISSN No. 0975-5241) (Indexed in:
Scopus) http://ijcrr.com/uploads/2852_pdf.pdf)
25. Behara santosh sagar, “A Review on Vibration Analysis of Rotor Shaft System by
Various Fault Diagnosis Techniques”, International Journal of Mechanical and Production
Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, pp. 13441–13449,
(ISSN No. 2249-8001) (http://www.tjprc.org/publishpapers/2-67-1600241671-
1281IJMPERDJUN20201281.pdf) (Indexed in: Scopus)
26. Sept 2020 GVSS Sharma , J. Raja Murugadoss, V. Rambabu, “Fostering Higher Order
Thinking Skills in Engineering Drawing”, Journal of Engineering Education
Transformations, Vol. No. 34, Issue No. 1, pp 28-40. (ISSN No. 2394-1707) (Indexed in:
Scopus) (http://journaleet.org/index.php/jeet/article/view/148359) Q3
27. Y.Shireesha, Govind Nandipati, K.Ravindra, Shiva Shankar Paka, “Experimental Study on
Mechanical Properties of Eco-Friendly Hybrid Composite”, Journal of Green
Engineering, Vol. 10, Issue 6, pp. 3264-3276. (ISSN No. 2245-4586) (Indexed in: Scopus)
(http://www.jgenng.com/volume10-issue6.php)
28. Aug 2020 Chiranjeeva Rao Seela, Ravi Sankar B., “Emulsified Nano Al2O3 – Jatropha
Methyl Ester Blends: Application in Variable Compression Ratio Engine”, World
Journal of Engineering, In Press, July 2020, (ISSN No. 1708-5284)
(https://www.emerald.com/insight/content/doi/10.1108/WJE-04-2020-0135/full/html)
(Indexd in : Scopus) (ESCI) Q3
29. Pankaj Kumar, Ajay Kumar Gupta, “Hydroelectric Energy using Prediction Technique of
Flood in River based on Fuzzy Rule Scheme”, International Journal of Mechanical and
Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, pp. 4647–
4654, August 2020 (ISSN No. 2249–8001) (http://www.tjprc.org/publishpapers/2-67-
1595573078- 439IJMPERDJUN2020439.pdf ) (Indexd in : Scopus)
30. Jagadeesh Varanasi, Dr. K. Venkata Subbaiah, K. Karthik, “Wind Energy Forecasting
Accuracy of Wind Power Plant by using Time Series Analysis based on Fuzzy Rule
Scheme”, Journal of Critical Reviews, Vol. 07, Issue 14, pp. 793–801, August 2020 (ISSN
No. 2394-5125) (http://www.jcreview.com/fulltext/197-1594885824.pdf?1597761069)
(Indexd in : Scopus)
31. July 2020 G. Dinesh Reddy, L.V.S. Prasad and P.K. Sarma, "A Review of Computational
Fluid Dynamics Approach for Analysis on Journal Bearing", International Journal of
Mechanical and Production Engineering Research and Development (IJMPERD), Volume
No. 10, Issue 3, pp. 3755-3760, June 2020, (ISSN No. :2249-8001) (Scopus)
32. M. Vykunta Rao, P. Srinivasa Rao and Potnuru Govinda Rao, "Influence of Transverse
Vibrations on the Fatigue Life of Aluminum Alloy Weld Connections", International
Journal of Mechanical and Production Engineering Research and Development (IJMPERD),
Volume No. 10, Issue 3, pp. 1353-1358, June 2020, (ISSN No. :2249-8001) (Scopus)
33. Naga Lakshmi Pavani Puvvada and Polarao Ronanki, "Expreimental Study on
Mechanical and Tribological Properties of Biodegradable Natural Fiber Composites",
International Journal of Mechanical and Production Engineering Research and Development
(IJMPERD), Volume No. 10, Issue 3, pp. 3595-3606, June 2020, (ISSN No. :2249-8001)
(Scopus)
34. P. Srinivasa Rao, G.V.S.S. Sharma and B. Surendra Babu, "Reflection on Spatial
Visualization for Enhanced Learning – A Comprehensive Review", International Journal
of Mechanical and Production Engineering Research and Development (IJMPERD),
Volume No. 10, Issue 3, pp. 1359-1370, June 2020, (ISSN No. :2249-8001) (Scopus)
35. Bade Venkata Suresh, P. Srinivasa Rao and Potnuru Govinda Rao, "Influence of Flexural
Strength on Welded Joints under the Effect of Electrode Vibratory Welding Process",
International Journal of Mechanical and Production Engineering Research and Development
(IJMPERD), Volume No. 10, Issue 3, pp. 1345-1352, June 2020, (ISSN No. :2249-8001)
(Scopus)
36. Sasidhar Gurugubelli, K. Santa Rao and Rajiv Aditya Jayanthi, "Design And Fabrication
of Economic Electric Bike with Fibre Reinforced Polymer Composite", International
Journal of Mechanical and Production Engineering Research and Development (IJMPERD),
Volume No. 10, Issue 3, pp. 4081-4090, June 2020, (ISSN No. :2249-8001) (Scopus)
37. K. Simhadri, P. Srinivasa Rao and M.K. Paswan, "An Experimental Investigation of R12
and R134A Refrigerants in a Two - Phase Ejector Expansion Refrigeration",
International Journal of Mechanical and Production Engineering Research and Development
(IJMPERD), Volume No. 10, Issue 3, pp. 1371-1378, June 2020, (ISSN No. :2249-8001)
(Scopus)
38. July 2020 D. Srinivasa Kumar, "A Cluster Investigation To Quantify The Financial
Performance Of Selected Housing Finance Companies In India", International journal of
scientific & technology research, Volume No. 9, Issue 6, pp. 594-601, June 2020, (ISSN
No. :2277-8616) (Scopus)
39. A Lakshumu Naidu, Rambabu, “Microstructure Analysis and Mechanical Behavior of
Semi Solid Aluminium 7075 Alloy Base Composite with Graphite Addition”,
International Journal of Psychosocial Rehabilitation, Vol. 2, Issue 7, pp. 38, May 2020.
(Scopus Indexed) ISSN : 1475-7192,
40. Bade, V.S., Srinivasa Rao, P.,Govinda Rao, P., “Experimental Investigation on Influence
of Electrode Vibrations on Hardness and Microstructure of 1018 Mild Steel
Weldments”, World Journal of Engineering, Vol. 17, Issue 4, pp. 509-517, May 2020
(ISSN: 1708-5284) (Indexed in Scopus) Q3
41. Alrobaian A., Rajasekar V., Alagumalai A., “Critical insight into Biowaste-Derived
Biocatalyst for Biodiesel Production”, Environmental Progress and Sustainable Energy, In
Press, 2020. (ISSN: 1944-7450) (SCIE Indexed) Q2
42. Rao K.P., Reddi V., “Parametric Optimization for Performance and Emissions of DI
Diesel Engine with Mahua Biodiesel along with Diethyl Ether as an Additive”, Biofuels,
Vol. 11, Issue 2, pp. 37-47, 2020. (ISSN: 1759-7277) (Scopus Indexed) Q2
43. Seela C.R., Ravi Sankar B., “Investigations on Ci Engine with Nano-Sized Zinc Oxide
added Mahua Methyl Ester Blends”, International Journal of Ambient Energy, Vol. 41,
Issue 2, pp. 146-151, January 2020. (ISSN: 0143-0750) (Scopus Indexed) Q2
44. Jagadeesh V., Venkata Subbaiah K., “Solar Forecasting Performance using Artificial
Intelligence Algorithms”, Test Engineering and Management, Vol. 83, pp. 132-139, March
2020. (ISSN: 0193-4120) (Scopus Indexed)
45. June 2020 Alagumalai, Avinash, Thangavel Mathimani, Arivalagan Pugazhendhi, A. E.
Atabani, Kathirvel Brindhadevi, and Nguyen Duc Canh, "Experimental Insight into Co-
Combustion Characteristics of Oxygenated Biofuels in Modified DICI Engine" Fuel,
Vol. No. 278, Issue No. X, pp 118303 June 2020. (ISSN No.:0016-2361) (Indexed in: SCI)
(Impact Factor:5.128) Q1
46. K. Simhadri, P. Srinivasa Rao, M.K. Paswan, "Experimental Investigation on Vapour
Compression Refrigeration System Employing R290/R600a (50/50) and TiO2nano-
Lubricant", Test Engineering and Management, Volume No. 83, Issue May- June 2020, pp.
14159-14166, June 2020 (ISSN No. : 0193-4120) (Indexed in Scopus)
47. Bade Venkata Suresh, P Srinivasa Rao, P Govinda Rao, ‘Influence of Electrode Vibration
on Impact Strength of 1018 Mild Steel Weldments’, Test Engineering and Management,
Vol. 83, Issue May- June 2020, pp. 14152-14158, June 2020 (ISSN No. : 0193-4120)
(Indexed in Scopus)
48. May 2020 G.V.S.S.Sharma, C.L.V.R.S.V. Prasad, M. Srinivasa Rao, “Industrial
Engineering into Healthcare – A Comprehensive Review", International Journal of
Healthcare Management, pp. 1-15, April 2020. (ISSN No. : 2047-9719) (Indexed in Scopus)
Q1
49. A Murugesan, A Avinash, E James Gunasekaran, A Murugaganesan, “Multivariate
Analysis of Nano Additives on Biodiesel Fuelled Engine Characteristics", Fuel, Vol.
No.275, Issue No.x, pp. 117922, April 2020. (ISSN No.:0016-2361) (Indexed in: SCI)
(Impact Factor:5.128) Q1
50. Gupta, S.K., Misra, R.D, “Development of Micro/Nanostructured-Cu-TiO 2-
Nanocomposite Surfaces to Improve Pool Boiling Heat Transfer Performance", Heat
and Mass Transfer, pp. 1-16, April 2020. (ISSN No. : 1432-1181) (Indexed in SCI) (Impact
Factor : 1.551) Q2
51. April 2020 Bade Venkata Suresh, P. Srinivasa Rao and Potnuru Govinda Rao. "Vibratory
Assisted Joining Processes for Quality Joints”, Journal of Xi’an University of
Architecture & Technology, Vol.12, Issue 4, pp.1553-1560, April 2020. (ISSN : 1006-7930
(Scopus Indexed) Q2
52. Alagumalai, A. , “Reduced Smoke and Nitrogen Oxide Emissions during Low-
Temperature Combustion of Ethanol and Waste Cooking Oil”, Environmental
Chemistry Letters, Vol. 18, Issue 2, pp. 511-516, April 2020.(doi:10.1007/s10311-019-
00954-1. ) ( IF 4.6) (ISSN : 1610-3653) (Indexed in Scopus and SCIE) Q1
53. Pugazhendhi A, Alagumalai A, Mathimani T, Atabani AE, “Optimization, Kinetic and
Thermodynamic Studies on Sustainable Biodiesel Production from Waste Cooking Oil:
An Indian Perspective”, Fuel, Vol. 273, Issue 117725, April 2020.
(doi:10.1016/J.FUEL.2020.117725.(SCI). IF 5.12 ISSN: 0016-2361) (Indexed in SCIE and
Scopus) Q1
54. D.Srinivasa Kumar, “Attributes Influencing Home Loan Borrowers in
Selecting Housing Finance Companies in India”, International Journal of Scientific &
Technology Research, Vol. 9, Issue 03, pp. 4059-4063, March 2020. (ISSN No. 2277-8616)
(Indexed in Scopus)
55. Das, S., Halder, S., Khan, N.I., Paul, B. and Goyat, M.S, “Assessing Damage Mitigation by
Silanized Milled Graphite Nanoparticles in Hybrid GFRP Laminated
Composites”, Composites Part A: Applied Science and Manufacturing, Vol 132, Issue
105784, pp. 1-10, April 2020. (ISSN No. 1359-835X) (Indexed in SCI and Scopus) Q1

Book Chapters

1. Pankaj Kumar, Ajay Kumar Gupta, Sanjay Kumar Gupta, R.K. Sahoo, “Effect of Porosity
on the Performance ofan GM-Type DIPTR Using CFD”, In: Palanisamy M.,
Ramalingam V., Sivalingam M. (eds) Theoretical, Computational, and Experimental
Solutions to Thermo-Fluid Systems, Lecture Notes in Mechanical Engineering. Springer,
Singapore. https://doi.org/10.1007/978-981-33-4165-4_23, March 2021. (Print ISBN 978-
981-33-4164-7, Online ISBN 978-981-33-4165-4), Q4,
(https://www.springerprofessional.de/en/effect-of-porosityon-the-performance-of-an-gm-
type-diptr-using-/18945404)
2. Gupta A.K., Kumar P., Sahoo R.K., “Numerical Analysis of Pulse Tube Cryocooler and
Optimization UsingTaguchi Method”, In: Palanisamy M., Ramalingam V., Sivalingam M.
(eds) Theoretical, Computational, andExperimental Solutions to Thermo-Fluid Systems.
Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-
981-33-4165-4_24, March 2021. (Print ISBN 978-981-33-4164-7, Online ISBN 978-981-
 33- 4165-4) (https://www.springerprofessional.de/en/numerical-analysis-of-pulse
tubecryocooler-and-optimization-usi/18945406)
3. Nazrul Islam Khan, Sudipta Halder, “Self-Healing Fibre-Reinforced Polymer Composites
for their Potential Structural Applications”, Self-Healing Polymer-Based Systems,
Elsevier, Chapter 15, DOI:https:doi.org/10.1016/B978-0-12-818450-9-00015-5, pp. 455-
472, Elsevier Publications, (Indexed in Scopus)
(https://www.researchgate.net/profile/Nazrul-Khan/publication/343028952_Self-
healing_fiberreinforced_polymer_composites_for_their_potential_structural_applications/lin
ks/5fc712bc45851568d1323c06/Self-healing-fiber-reinforced-polymer-composites-for-their-
potentialstructural-applications.pdf)
4. T. S. A. SuryaKumari and S. Ranganathan, “Investigation of Process Parameters on
Sliding Wear Behaviour of Aluminium 7075 Hybrid Nanocomposite Analyzed Using
Response Surface Methodology-Part I”, Advances in Materials and Manufacturing
Engineering, Springer Proceedings in Materials book series (SPM, volume 7), pp 461-468,
(ISBN No: 978-981-15-6267-9) (https://link.springer.com/chapter/10.1007/978-981-15-
6267-9_53)
5. T. S. A. SuryaKumari and S. Ranganathan, “Optimization of Process Parameters on
Sliding Wear Behavior of Aluminum 7075 Hybrid Nanocomposite Analyzed Using
Desirability Approach-Part II”, Advances in Materials and Manufacturing Engineering,
Springer Proceedings in Materials book series (SPM, volume 7), pp 453-459, (ISBN No:
978-981-15-6267-9) (https://link.springer.com/chapter/10.1007/978-981-15-6267-9_52)
6. T. S. A. Suryakumari, S. Ranganathan, B. Mahendra Reddy, G. Nethaji, and Challam
Naveen Kumar, “Tribological Behaviour of Al 7075 Alloy Reinforced with Nano-
Alumina and Silicon Carbide Particulates”, Advances in Materials and Manufacturing
Engineering, Springer Proceedings in Materials book series (SPM, volume 7), pp 445-451,
(ISBN No: 978-981-15-6267-9) (https://link.springer.com/chapter/10.1007/978-981-15-
6267-9_51)
7. Alagumalai, Avinash. "Biodiesel Production: Processes and Technologies." Recent
Technologies for Enhancing Performance and Reducing Emissions in Diesel
Engines”, IGI Global, 2020. 1-25. Web. doi:10.4018/978-1-7998-2539-5.ch001
--------------------------------------------------------------------------------------------------------------------

2019-20 :

2019-20 :
National Conferences:
1. M. Vijay Sekhar Babu, Ankur Jaiswal and Piyush Tiwari, “Finite Element Formulation
and Analysis of Single-Walled Carbon Nanotubes (SWCNTs)” National Conference on
“Challenges and Opportunities in Indian Industries” 12 -13 April, Department of
Metallurgical Engineering, National Institute of Technology (NIT), Raipur, 2019

2019-20 :
National Journals:
-------------NIL------------
2019-20 :
International Conference:
1. Khan NI, Halder S, Gunjan SB. “Bismaleimide Functionalization of GNP for Diels-Alder
based Self-Healing of Epoxy Nanocomposites”, 2nd International Conference on
Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, Odisha, India,
12th -14th December, 2019.
2. K. Simhadri, P.S.Rao, M.K. Paswan. “Experimental Investigation on Vapour
Compression Refrigeration System by Employing R290/R600a (50/50) and TiO2 Nano-
Lubricant”, 4th International Conference on Materials Science and Engineering
Application, ICMSEA, at Centurion University, Parlakhemidi, Odisha 19 th – 21st December
2019.
3. Seela C.R., Gade N., Srinivasa Rao M., “Analysis on CI Engine with Thermal Barrier
Coating and Biodiesel Blends”,. In: Pujari S., Srikiran S., Subramonian S. (eds) Recent
Advances in Material Sciences. Lecture Notes on Multidisciplinary Industrial Engineering.
Springer, Singapore, DOI: https://doi.org/10.1007/978-981-13-7643-6_58, Print ISBN 978-
981-13-7642-9,Online ISBN 978-981-13-7643-6, First Online 07 August 2019 (non-scopus
conference proceedings). International Conference on Latest Innovations in Materials
Engineering and Technology ,Departments of Mechanical Engineering, Lendi Institute of
Engineering and Technology, 15th and 16th June, 2018.
4. Sudhakar U, M V A Raju Bahubalendru, Subbarama Kousik Suraparaju, Sendhil Kumar
Natarajan, “Optimization of Process Parameters in Resistance Spot Welding Using
Artificial Immune Algorithm” 1st International Conference on Innovative Product Design
and Intelligent Manufacturing Systems (ICIPDIMS’19) 17 -18 May, jointly organized by
Department of Industrial Design and Department of Mechanical Engineering, National
Institute of Technology (NIT), Rourkela, 2019.
5. Anil Kumar Gulivindala, Vykunta Rao Matta, M V A Raju Bahubalendrun, “Disassembly
Sequence Planning Methodology for EOL Products Through a Computational
Approach” 1st International Conference on Innovative Product Design and Intelligent
Manufacturing Systems (ICIPDIMS’19) 17 -18 May, jointly organized by Department of
Industrial Design and Department of Mechanical Engineering, National Institute of
Technology (NIT), Rourkela, 2019.
2019-20 :
International Journals:
1. Feb 2020 Santarao, Korada, C. L. V. R. S. V. Prasad, and Gurugubelli Swaminaidu,
"Influence of Dominant Variables and their Optimization for Nano Powder Blended
EDM Process," Indian Journal of Engineering & Materials Sciences, Vol. 26, pp. 356-
362, October-December 2019, (ISSN : 0975-1017(Scopus) Q3
2. Sasidhar Gurugubelli, Fathimunnisa Begum, LSV Prasad, “Experimental Tensile
Strength Characterization of Metal Matrix Composite Aluminum-6069 Percentage
variation Reinforced with Molybdenum and Coconut Shell Ash”, International
journal of scientific and technology research, Vol.9, No.2, pp. 803-808, February 2020
(ISSN 2277-8616) (Scopus).
3. Jaya Prakash Killi, V.Rambabu, Sanjay Kumar Gupta, “Effect of Newly Designed Coil
Arrangements Slinky, Spiral, and U-Type on the Horizontal Ground Heat
Exchanger Performance”, International Journal of Scientific and Technology research,
Vol. 8, No. 12, pp. 363-369, December 2019. (ISSN 2277-8616) (Scopus)
4. Jagadeesh, V., K. Venkata Subbaiah, and Jyothi Varanasi, "Forecasting the Probability
of Solar Power Output using Logistic Regression Algorithm", Journal of Statistics and
Management Systems, Vol. 23, No. 1, pp. 1-16, 2020.
5. Jan 2020 I. Manivannan, S. Ranganathan, S. Gopalakannan, S. Suresh and D. Candane,
“Mechanical and Wear Surface Characterisation of Aluminium Hybrid
Nanocomposite”, Int. J. Computational Materials Science and Surface Engineering, Vol.
8, Nos. 3/4, pp 195-210, 2019 (ISSN : 1753-3473) (Scopus) Q3
6. Santarao Korada, Lakshmi Venkata Ranga Sobhanachala Vara Prasad Chilamkurti and
Swaminaidu Gurugubelli, “Employing SiC Nano-Powder Dielectric to Enhance
Machinability of AISI D3 Steel in Electrical Spark Machining”, International Journal
of Modern Manufacturing Technologies, Vol. 11, Issue 3, pp. 89-93, Nov 2019 (ISSN :
2067-3604) (scopus) Q3
7. I.Manivannan, S. Ranganathan, S. Gopalakannan “Application of Desirability-Based
Multiobjective Optimization Techniques to Study the Wear of Al Self-Lubricating
Hybrid Nanocomposites”, Transactions of the Indian Institute of Metals, pp. 1-15, Nov
2019 (ISSN : 0972-2815) (SCI) published online : 23 November 2019 Q2
8. Manivannan, I., S. Ranganathan, and S. Gopalakannan, "Dry Sliding Wear Behaviour
of Hybrid Aluminum based Nanocomposites." Materials Research Express Vol. 6, No.
12, Nov 2019 (ISSN : 2053-1591) (SCI) published online : 15 November 2019 Q2
9. Manivannan, I., S. Ranganathan, S. Suresh, and P. Philomen-D-Anand Raj, "Failure
Analysis using Online Acoustic Emission and Tribological Behavior of Al6061-Al 2
O 3 Nano Composite." Materials Research Express Nov 2019 (ISSN : 2053-1591) (SCI)
published online : 28 November 2019 Q2
10. M.Vykunta Rao, P Devi Prasad, Bade Venkata Suresh, “Influence of Mode of Power
Source on the Mechanical Properties of Vibratory Weld Joints”, International Journal
of Innovative Technology and Exploring Engineering (IJITEE), Vol.11, No. 2, pp. 2919-
2922, Dec. 2019 (ISSN : 2278-3075) (scopus)
11. Uppuganti Sai Akhil, Avinash Alagumalai “A Short Review on Valorization of
Slaughterhouse Wastes for Biodiesel Production”, Chemistryselect, Vol. 4, Dec 2019
(ISSN: 2365-6549) (SCIE) Q2
12. D. Srinivasa Kumar, “Demographic Characteristics as Cognitive Elements to
Measure the Service Quality of Housing Finance Companies in India”, International
Journal of Scientific & Technology Research, Vol. 8, Issue 10, October 2019 (Indexed in
Scopus)
13. Bade Venkatasuresh, Y. Shireesha and P. Srinivasa Rao, “Emission and Performance
Analysis of an Internal Combustion Engine with Turbocharger using Alternate
Fuel”, JP Journal of Heat and Mass Transfer, Vol. 17, No. 2, pp 539-551, Sep 2019
(ISSN : 0973-5763) (scopus) Q4
14. Srinivasa Rao Meesala, Naikan V.N.A., “A Novel Framework for Time Dependent
Availability Analysis of Degraded Systems”, International Journal of Recent
Technology and Engineering (IJRTE), Vol. 8, No. 3, Sep 2019 (ISSN: 2277-3878)
(Scopus).
15. Murugesan Arthanarisamy, Avinash Alagumalai, Kumaravel Arumugam, "An
Experimental Insight into Optimized Biodiesel Production and External Re-
Breathing of Burned Gases On Biodiesel Combustion", Journal of Thermal Analysis
 and Calorimetry, DOI 10.1007/s10973-019-08620-y, August 2019 (ISSN 1388-6150)
(SCI) Q2
16. R. Gokulana, A. Avinash. A, Ganesh Prabhu. G, Jegan. J, "Remediation of Remazol
Dyes by Biochar derived from Caulerpa Scalpelliformis—An Eco-friendly
Approach", Journal of Environmental Chemical Engineering, Vol. 7, No.5, pp. 103 -
297, August 2019. (ISSN: 2213-3437) (Scopus) Q1
17. Yegireddi Shireesha, Govind Nandipati, KiranKumar Chandaka, “Properties of Hybrid
Composites and its Applications: A Brief Review”,International Journal of Scientific &
Technology Research, Vol. 8, Issue No. 8, pp. 335-341, August 2019. (scopus, yet to be
indexed in scopus author preview)
18. B Sowgandhi, P N L Pavani, “Recent Studies in the Application of Internal Cooling
System in Conventional Machining Process”, International Journal of Scientific &
Technology Research, Vol. 8, Issue 8, pp. 441-444, August 2019. (scopus, yet to be
indexed in scopus author preview)
19. Hemant P. Jawale, Ankur Jaiswal, Kapil N. Bhasme, “Design and Analysis of Three-
Axis Cantilever type Force Sensor”, World Journal of Engineering, June 2019,
ISSN:1708-5284, (Indexed in free scopus) Q3
20. Bade Venkata Suresh, P Srinivasa Rao, P Govinda Rao, “Improvement of Tensile
Strength of 1018 Mild Steel Welded Joints Produced Under the Influence of
Electrode Vibration”, International Journal of Innovative Technology and Exploring
Engineering (IJITEE) , Vol. 8, Issue 8, 2019, pp 1219-1222, ISSN: 2278-3075 (Indexed
in paid scopus)
21. M.V.A.Raju Bahubalendruni, U.Sudhakar, K.V.Vara Lakshmi, “Subassembly Detection
and Optimal Assembly Sequence Generation through Elephant Search Algorithm”,
International Journal of Mathematical, Engineering and Management Sciences, Vol. 4,
Issue 4, 2019, pp 998-1007, ISSN: 2455-7749 (Indexed in free scopus) Q2
22. Sasidhar.G, Leela Prasad.G, Mahesh Kumar.G, Chaitanya Vardhan.B, Prudhvi Kumar.G
“Design, Fabrication and Analysis of Varying Loads on Speed Hump”,International
Journal of Research in Advent Technology, Vol.7, No.4, pp472-477, April 2019. (E-
ISSN: 2321-9637) (non-scopus)

Book Chapters

1. Vamsi A.S., Seela C.R., Naveen A, “Design and Fabrication of Four-Way Multi-
hacksaw Cutting Machine”, In: Reddy A., Marla D., Simic M., Favorskaya M., Satapathy
S. (eds) Intelligent Manufacturing and Energy Sustainability. , Vol 169, pp. 67-76,
DOI: https://doi.org/10.1007/978-981-15-1616-0_7, Print ISBN 978-981-15-1615-3, Online
ISBN978-981-15-1616-0, Smart Innovation, Systems, and Technologies. Springer, Singapore
(Scopus)
2. G.V.S.S.Sharma, P.Srinivasa Rao and B. Surendra Babu “Generation of Sequence of
Machining Operations through Visualization of End Product”, In: Shunmugam M.,
Kanthababu M. (eds) Advances in Forming, Machining and Automation. Chapter 58, DOI:
https://doi.org/10.1007/978-981-32-9417-2_58, Print ISBN978-981-32-9416-5, Online
ISBN978-981-32-9417-2, Lecture Notes on Multidisciplinary Industrial Engineering.
Springer, Singapore (Non-Scopus).

---------------------------------------------------------------------------------------------------------------------
2018-19 :
2018-19 :
National Conference:
1. U. Sudakar, “Thermo-Mechanical Modeling of Friction-Stir Welding in Dissimilar
Aluminium alloys”, Proceedings of the 3rd International Conference on Design, Analysis,
Manufacturing and Simulation (ICDAMS-2018) on April 06 & 07, 2018 organized by
Department of Mechanical Engineering, Saveetha School of Engineering, Chennai.
2. B.M.V.A. Raju, G. Anil Kumar, “Practically Feasible Optimal Assembly Sequence
Planning with Tool Accessibility”, 3rd International Conference on Materials and
Manufacturing Engineering (ICMME-2018) on 08-03-2018 to 09-03-2018 Organized by
Department of Mechanical Engineering, SCSVMV university, Kanchipuram, Chennai.
3. M.Sekar, B.D.Deepak, I.Kantharaj, "A Novel Wi-Fi Embedded System to Measure and
Analyze Temperatures in Metal Cutting", 5th National Level Conference on ‘Emerging
Trends In Electrical, Electronics And Computer Engineering’, organized by JCT College of
Engineering and Technology, Coimbatore, held on 4 th April 2018.
4. N. Venkatesh, Dr. M. Srinivasa Rao, A. Lakshumu Naidu, “A Review on Emission
Characteristics of Diesel engines with Biodiesel blends from Different oils”, A two day
National Conference on GREEN and SUSTAINABLE ENERGY-Indian Perspective in
Global Environment. Sponsored by SERB,DST, held at AITAM Tekkali on 14-07-2017 to
15-07-2017
2018-19 :
National Journal:
-------------NIL------------
2018-19 :
International Conference:
1. C.L.V.R.S.V. Prasad, I. Dharma Rao, K. Santa Rao, “Experimental Investigations to Study
the Effect on Coefficient of Friction and Heat Transfer Coefficient in the Lubricants
with Nano Blending”, International Mechanical Engineering Congress and Exposition, held
on 03-11-2017 to 09-11-2017 organized by ASME, Tampa, Florida, USA
2. D.Srinivasa Kumar, K.V.S.Prasad and A. Vinod Kumar(BARC Scientist H), “Influence of
Education Levels on Women’s Fertility: A Study in Kovvada Region, Srikakulam
District, Andhra Pradesh”, Conference Proceedings of 16th Annual Conference, Indian
Association for Social Sciences and Health (IASSH), pp. 62, held at Jawaharlal Nehru
University, Delhi, Dec 10-12, 2018
3. V. Rambabu, A. Lakshumu Naidu, Srinivas Kona, “Analysis of Mechanical and Thermal
Behavior of Sisal Fiber Composites: Review”, International Mechanical Engineering
Congress and Exposition, International Conference on Latest Innovations in Materials
Engineering and Technology, Organized by Lendi Institute of Engineering and Technology,
Vizianagaram, .held on 15-06-2018 to 16-06-2018
2018-19 :
International Journal:
1. M.VykuntaRao, P. Srinivasa Rao and B. Surendra Babu, “Effect of Transverse Vibrations
on the Hardness of Aluminum 5052 H32 Alloy Weldments”, International Journal of
Mechanical Engineering and Technology, Vol. 10, Issue 1, pp. 327–333, 2019, (ISSN Print:
0976-6340, ISSN Online: 0976-6359) (Scopus Indexed).
2. M. VykuntaRao and K. Simhadri, “Experimental Investigation on Performance
Characteristics of Four Stroke Single Cylinder Petrol Engine using a Pre-Heating Set-
Up for Methanol Blends”, International Journal of Mechanical Engineering and
Technology, Vol. 10, Issue 2, pp. 351-360, 2019, (ISSN Print: 0976-6340, ISSN Online:
0976-6359) (Scopus Indexed).
3. Vinod Babu Chintada , Ramji Koona, “Preparation and Properties of composite
electroless Ni-P-ZnO coatings” material research innovations ,
https://doi.org/10.1080/14328917.2019.1582740, ISSN: 1432-8917 (Print) 1433-075X
(Online), (Scopus Indexed) Q3
4. Bade Venkata Suresh, P Srinivasa Rao, P Govinda Rao, "Influence of Vibrations in
Welding Process to Enhance Mechanical Properties: A Review " International Journal of
Scientific Research and Review, Vol. No. 8, Issue No. 02, pp. 576-585, February 2019.
(ISSN No: 2279-543X)
5. U.Sudhakar, B.V.Suresh, M.V.A.Raju Bahubalendruni, “A review on physical and
chemical properties of natural fiber reinforced composite materials”, International
Journal of Scientific Development and Research (IJSDR), Vol . No. 3, Issue No.12, pp 160-
172, Dec 2018. (ISSN:2455-2631) (Not indexed in scopus/SCI)
6. D. Venkata Rao, A. Lakshmu Naidu, M.V.A.Raju Bahubalendruni, “A Review on
Mechanical Behaviour of Polymers/ Sisal Fiber Reinforced Composites Material”,
International Journal of Scientific Development and Research (IJSDR), Vol . No. 3, Issue
No.12, pp 190-199, Dec 2018. (ISSN:2455-2631) (Not indexed in scopus/SCI)
7. D.Srinivasa Kumar, K.V.S.Prasad, A.Vinod Kumar, “A few Demographic Factors
affecting the Decline of Total Fertility Rate: An Empirical Evidence”, International
Journal of Mechanical Engineering and Technology, Vol. 10, Issue 1, pp. 1762-1771,
January 2019. (ISSN No.: Online - 0976-6359, Print - 0976-6340)(Indexed in: Scopus)
8. Naga Lakshmi Pavani Puvvada, Pola Rao Ronanki, L.V.R.S.V. Prasad Chilamkurti,
"Experimental Investigation to Assess the Performance and Optimization of Process
Parameters of Esm Ing Process", Journal of Modern Machining Processes, Vol. 10, Issue 2,
pp. 58-66, December 2018. (ISSN: 2067–3604) (Scopus indexed)
9. Isai Dharma Rao, C.L.V.R.S.V.Prasad and K.Santarao, "Experimental Investigation to
Enhance the Performance of High Speed Reduction Gearbox using Nano Blended
Lubricants", Journal of Surface Science and Technology, Vol. 34, Issue 3-4, pp. 87-97,
December 2018. (ISSN.:0970-1893) Q4
10. V. Rambabu, Srinivas Kona, A.Lakshmu Naidu, P.S.V. Ramana Rao“ Mechanical
Properties of Okra and Jute Fibers Filled with Groundnut Shell Ash Reinforced
Composites with Epoxy (LY556) and Epoxy (XIN 100 IN) Resin Matrices”, Journal of
Materials and Environmental Sciences, Vol. No.9, Issue No.7, pp 2169-2173, Dec 2018.
(ISSN: 2028-2508) (Indexed in: Scopus)
11. D.Srinivasa Kumar and A. Lakshumu Naidu, “The Business Philosophies for Extended
Enterprise in Manufacturing Automobile Sectors”, International Journal of Mechanical
and Production Engineering Research and Development (IJMPERD). Vol.No.8, Issue No. 2,
pp, 715-730, Apr 2018. (ISSN (P): 2249-6890; ISSN (E): 2249-8001) (Indexed in: Scopus)
(Impact Factor(JCC) : 7.6197)
12. K.Santarao, C.L.V.R.S.V. Prasad, and G. Swaminaidu. "Parametric Optimization of Nano
Powder Blended Electrical Spark Machining Process on AISI D3 DIE Steel Employing
 Grey Relational Analysis." Journal of Materials and Environmental Sciences, Vol. 9, Issue
10, pp. 2854-2862, December 2018. (ISSN.:2028-2508)
13. Ch. Vinod Babu and Ramji Koona “Influence of surfactant on the properties of Ni-P-ZnO
composite coating.” Materials Research Express, Vol. No.6, Issue No. 3,025030
(ISSN:2053-1591) (SCIE Indexed) Q2
14. Ch.Suresh, C.L.V.R.S.V.Prasad & K.Santa Rao, "Performance Assessment of an
Automobile Radiator using Al2O3/Water+EG based Nanocoolant", International Journal
of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8,
Issue 4, pp. 715-725, August 2018. (ISSN.:2249-6890) (Indexed in Scopus)
15. D. Ajay Kumar, A. Lakshmu Naidu, “A Study on different chemical treatments for
natural fiber reinforced composites”, International Journal of Mechanical and Production
Engineering Research and Development, Vol..8, Issue 5, pp. 143-152, October 2018.
(Indexed in: Scopus)
16. Vinodbabu Chintada, Ramji Koona, “Influence of SiC Nano Particles on Microhardness
and Corrosion Resistance of Electroless Ni–P Coatings”, Journal of Bio- and Tribo-
Corrosion, Vol. 4, Issue 4, December 2018. (Scopus Indexed) Q2
17. S. Chiranjeeva Rao, B. Rabi Sankar, “Stability Analysis and Characterization of the Nano
Emulsified Jatropha-Curcas-based Bio-fuel”, Energy Sources, Part A: Recovery,
Utilization, and Environmental Effects, Published online first on 31 st July 2018. (Indexed in
SCI (Impact factor- 0.555) and Scopus (free)) Q2
18. Ch.Vinod Babu, Y.Meghana, T.Dharama Teja, “A Review on Recent Trends in Surface
Coatings”, IOP Conference Series: Material Science and Engineering, Vol. 390, Issue
012079, pp. 1-6, July 2018. (Indexed in Scopus)
19. B.Venkata Suresh, Y.Shireesha, P.Govinda Rao, “Effect of Rear Axle Ratio on Vehicle
Performance”, Journal of Mechanical Engineering Research and Developments, Vol. 40,
Issue 3, pp-515-525, 2017. (Indexed in Scopus (free))
20. S.Chiranjeeva Rao, B.Rabi Sankar, “Investigation on CI Engine with Nano Sized Zinc
Oxide added Mahua Methyl Ester Blends”, International Journal of Ambient Energy,
(https://doi.org/10.1080/01430750.2018.1451377), Published online first on March 2018.
(Indexed in ESCI, scopus (free)) Q2
21. B. Venkata Suresh, Y. Shireesha and B. Sateesh, “Vibration Analysis and Control of
Locomotive System” , Mechanics and Mechanical Engineering, Volume-22, Issue no.1,
2018, pp-195-205. ISSN: 2354-0192, Indexed in Scopus Q4
22. K. Santa Rao, C.L.V.R.S.V. Prasad, G. Swami Naidu, “Experimental Invistigation on
Influence of SiC and Nanopowder blended Dielectric in Electric Spark Machining”,
International Journal of Modern Manufacturing Technologies, Vol. X, No 1, pp- 84- 91,
2018. (Indexed in Scopus) Q3
23. M. Akhilesh, K. Santa Rao, M.V.S. Babu, “Thermal Conductivity of CNT- Water
Nanofluids: A Review”, Mechanics and Mechanical Engineering, Vol. 22, Issue 1, pp. 207-
220, 2018 (Indexed in Scopus) Q4
24. V. Chitti Babu, P. Govinda Rao, K. Santa Rao and K. Murali Krishna, “ Design of Accurate
Steering Gear Mechanism”, Mechanics and Mechanical Engineering, Vol. 22, Issue
no.1,pp-91-103, 2018. (Indexed in Scopus) Q4
25. M.V.S. Babu, K.N.S. Suman, P. Srinivasa Rao, “Drafting Software as a Practicing Tool
for Engineering Drawing-based Courses: Content Planning to its Evaluation in Client–
 Server Environment”, International Journal of Mechanical Engineering education,
Published online first on 01-01-2018. ISSN: 2050-4586, Indexed in Scopus. Q2
26. B.B.V.L. Deepak, Balamurali.G, B.M.V.A. Raju, B.B. Biswal, “Assembly Sequence
Planning using Soft Computing Methods: A Review, “Proc. Institute of Mechanical
Engineers Part E: J. Process Mechanical Engineering, Published online on 29-03-2018.
ISSN: 2041-3009, Indexed in SCI with impact factor of 1.448, Indexed in Scopus.
27. B.M.V.A. Raju, Hruday.K, Rahul.B, “Robots in Medicine: Past, Present and Future”,
International Journal of Manufacturing, Materials and mechanical Engineering, Volume-7,
Issue-4, pp; 44-64, 2017. ISSN: 2156-1672, Indexed in ESCI, Scopus. Q4
28. A. Shobha Rani, D. Ajaad, P. Karteek, A. Lakshumu Naidu, “Expermental Investigation on
the Performance and Emission Characteristics of DI-Diesel Engine using Diesel -
Ethanol blends and Aluminium Oxide Nano Particles”, International Journal of
Mechanical and Production Engineering Research and Development (IJMPERD), Volume-8,
Issue-01, pp-521-530, 2018. ISSN: 2249-8001, Indexed in Scopus.
29. A. Lakshumu Naidu, K. Srinivas, “Experimental Study of The Mechanical Properties of
Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite”,
International Journal of Engineering, Volume-31, Issue-4, pp-184-191, April 2018. ISSN :
1735-9244, Indexed in ESCI, Scopus.
30. J. Kalpana, P. Srinivasa Rao, P. Govinda Rao, “Investigation of Acceleration Effect on the
Flexural Strength of Vibratory Dissimilar Welded Joints”, Materials Focus Journal,
Volume-6, Issue-2, pp- 107-113, April 2018. ISSN: 2169-4303, Indexed in ESCI, Scopus.
31. A.Sarvana Kumar, K.Santa Rao, G.Nandini, “Influence of Alumina Nano Powder Mixed
Dielectric Fluid in Electric Spark Machining of AISI D3 Steel”, International Journal of
Mechanical and Production Engineering Research and Development (IJMPERD), Vol.8,
Issue-2, pp. 1257-1264, April 2018. ISSN: 0976-6359 (Indexed in Scopus)
--------------------------------------------------------------------------------------------------------------------

2017-18 :

2017-18 :
National Conference:
-------------NIL------------
2017-18 :
National Journal:
-------------NIL------------
2017-18 :
International Conference:
1. Ch.Vinod Babu, “A Review on Recent Trends in Surface Coatings”, 3rd International
Conference on Materials and Manufacturing Engineering (ICMME-2018) held at Sri
Chandrasekharendra Saraswathi Viswa Mahavidyalaya, Chennai on 8 th and 9th March, 2018.
2. A.Lakshumu Naidu, “Study of Process Parameters of Friction Stir Welded AA7020 AL”,
International Conference on Mathematical Sciences in Engineering Applications (ICMSEA-
2018) held at BABA Institute of Engineering and Technology, Vizag during 22 nd to 24th
December, 2017.
3. A. Lakshumu Naidu, “Mechanical Behavior of Layered Silicate Composites from
Nagavali River”, International Conference on Advances in Materials and Manufacturing
Engineering (ICAMME 2018) held at Acharya Nagarjuna University, Guntur during 22 nd to
24th January, 2018.
4. I. Kantharaj, M.Sekar, X.Vasanth and A. Mohansundaram, "Comparative Study of Cutting
Fluid Application Methods to Improve Machine Conditions in Surface Grinding on
AISI 1040 Steel", International Conference on Engineering Materials, Metallurgy and
Manufacturing (ICEMMM 2018), held at SSN College of Engineering, Chennai during 15 th
and 16th February, 2018.
5. M. Sekar A. Koilraj and B. Suresha, "Machining Investigations of a Free Form Curve",
International Conference on Contemporary Design and Analysis of Manufacturing and and
Industrial Engineering systems, held at NIT- Trichy. Tamilnadu, 18 th Jan 2018. (Won best
paper award).
6. K. Sandeep and M. Sekar, "Experimental Analysis of Properties of Biolubricant Derived
from Palm Kernel Oil" International Conference on Emerging Trends in Engineering,
Science and Technology (ICETEST) - PDME 2018, held at Government College of
Engineering, Trissur, Kerala, 19th Jan 2018.
2017-18 :
International Journals:
1. B.M.V.A. Raju, “An Efficient Method for Exploded View Generation through
Assembly Coherence Data and Precedence Relations”, World Journal of Engineering,
Published online first. (ISSN: 1708-5284) (Indexed in ESCI, Scopus) Q3
2. D. Srinivasa Kumar and K.V.S. Prasad, “A Logical Investigation of Demographic
Characteristics of Human Population in Selected Area of Srikakulam District”,
International Journal of Mechanical Engineering and Technology (IJMET), Vol. 9, Issue
2, pp. 539-546, February 2018. (ISSN: 0976 – 6340, Indexed in Scopus)
3. D. Srinivasa Kumar and A. Lakshumu Naidu, “The Business Philosophies for Extended
Enterprise in Manufacturing Automobile Sectors”, International Journal of
Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8,
Issue 2, pp. 715-730, Accepted for publication April 2018 issue. (ISSN: 0976-6359,
Indexed in Scopus)
4. D. Abhishekkrishna, M. Anusha, A. Saravana Kumar, “Role of Solid Lubrication in
Materials”, International Journal for Research and Development In Technology, Vol. 8,
Issue 6, pp. 355-359, December 2017.
5. Balamurali Gunji, B.B.V.L.Deepak, M.V.A.Raju Bahubalendruni and Bibhuti Bhushan
Biswal, “An Optimal Robotic Assembly Sequence Planning by Assembly Subsets
Detection Method using Teaching Learning-Based Optimization Algorithm”, IEEE
Transactions on Automation Science and Engineering, Published online first. ISSN:
1545-5955. (Indexed in SCI, SCOPUS) Q1
6. J. Kalpana, P. Srinivasa Rao, P. Govinda Rao, “A review on techniques for improving
the mechanical properties of fusion welded joints”, Engineering Solid Mechanics,
 Volume-5, Issue-4, pp- 213-224, Aughust-2017. ISSN: 2291-8744, Indexed in Scopus
Q2
7. J. Kalpana, P. Srinivasa Rao, P. Govinda Rao, “ Effect of Vibratory welding process on
hardness of dissimilar welded joints”, Engineering Solid Mechanics, Volume-5, Issue-
2, pp- 213-224, July-2017. ISSN: 2291-8744, Indexed in Scopus Q2
8. J. Kalpana, P. Srinivasa Rao, P. Govinda Rao, “Influence of Amplitude on the tensile
Strength of Welded Joints fabricated under Vibratory weld conditioning”, Journal
of mechanical engineering research and developments, Volume-39, No.3, pp- 757-762,
2016. ISSN: 1024-1752, Indexed in Scopus.
9. J. Kalpana, P. Srinivasa Rao, P. Govinda Rao,” Effect of Frequency on impact
Strength of Dissimilar weldments produced with vibration”, International Journal of
Chemical Sciences, Volume-14, Issue-3, pp- 1797-1804, 2016. ISSN: 0972-768X,
Indexed in Scopus.
10. K. Santa Rao, C.L.V.R.S.V. Prasad, G. Swaminaidu, “Influence of dominant variables
and their optimization for nanopowder blended EDM process”, Journal of
Engineering Technology, Volume-6, Special issue on Technology Innovations and
applications, pp-164-169, October-2017. ISSN: 0747-9964, Indexed in SCI and Scopus
Q4
11. G.V.D. Mohan, Srinivas Kona, A. Lakshmu Naidu, “A small-scale fabrication facility
for extraction of alternative diesel fuel from waste plastic”, International Journal of
Mechanical and Production Engineering Research and Development, Volume-8, Issue-1,
pp- 521-530, February 2018. ISSN: 2249-6890, Indexed in Scopus.
12. U. Sudhakar, J. Srinivas, M.V.A. Raju Bahubalendruni, “ Flexural Behaviour
Characterization of AA5251-AA6063 Joint prepared through Fricition Stir Welding
process”, International Journal for Research and Development in Technology”, Vol. 8,
Issue 6, pp. 211-214, December 2017.
13. S. Chiranjeeva Rao, B. Ravisankar, B.M.V.A. Raju, “A GRNN based Frame Work to
Test the Influence of Nano Zinc Additive Biodiesel Blends on CI engine Performance
and Emissions”, Egyptian Journal of Petroleum (Elsevier Journal), published online first
in September 2017. (Scopus Indexed) Q1
14. M.V.S.Babu, K.N.S.Suman, A.Ramakrishna, "Improvement of Fatigue Strength of Tin
Babbit by Reinforcing with Nano Ilmenite", Journal of Engineering Science and
Technology, Vol.12, Issue 8, pp. 1999 - 2009, October, 2017, ISSN No.: 1823-4690,
Scopus Indexed: Yes Q3
15. Ch.Vinod Babu, M. Vykunta Rao, U. Sudakar, “Analysis of composite leaf spring: A
comparison”, International Journal of Mechanical Engineering and Technology
(IJMET), Volume.8, Issue.6, pp-688-694, June-2017. ISSN: 0976-6359, Indexed in
Scopus.
16. Chiranjeeva Rao Seela, Ravisankar Bhuvanagiri, Rajesh Bathi “Effect of Nano Al 2O3
Added Jatropha Methyl Ester On CI Engine Performance and Emissions”, Rasayan
Journal of Chemistry, Volume. 10, No. 4, pp-1189-1193, October - December, 2017.
ISSN: 0976-0083, Scopus Indexed: Yes Q2
17. D. Srinivasa Kumar, “Housing Finance Snags faced by Indian home loan mortgagors: A
matter-of-fact study”, Indian Journal of Finance, Volume.11, Issue.11, pp- 56-65,
November-2017. ISSN: 0973-8711, Scopus Indexed: Yes Q3
18. D. Venkata Rao, K. Srinivas, A. Lakshumu Naidu, “ A review on Jute stem Fiber and its
Composites”, International Journal of Engineering trends and Technology (IJETT),
Volume.6, Issue.1, pp-1-11, September-2017. ISSN: 2231-5381 Q4
19. Ch.Vinod Babu, K. Ramji, “Structural Analysis of Nanocomposite Foundation for
Marine Machinery”, Journal of Engineering Science and Technology Review, Volume-
10, Issue-4, pp-31-36, 2017. ISSN: 1791-2337, Indexed in Scopus
20. V. Rambabu, J. Ramarao, S. Ravibabu, “ Enhancement of Heat transfer in Shell and
Tube heat exchanger by using nano fluid”, International Journal of Mechanical and
Production Engineering Research and Development (IJMPERD), Volume-7, Issue -5,
pp-191-198, October-2017. ISSN: 2249-6890, Indexed in Scopus.
21. G. Musalaiah, B.V. Suresh, B. Prasanth, B. Dhanraj, “ Experimental Studies on Tensile
Properties of Jute Fiber reinforced Polymer Composites”, International Journal of
Mechanical and Production Engineering Research and Development (IJMPERD),
Volume-7, Issue -4, pp-321-326, August-2017. ISSN: 2249-6890, Indexed in Scopus.
22. G. Musalaiah, Y. Shireesha, P. Kamal Kumar, P. Satyanaryana Raju, “ Compressive and
Flexural strength improvement of Jute Fiber reinforced polymer composited”,
International Journal of Mechanical and Production Engineering Research and
Development (IJMPERD), Volume-7, Issue -4, pp-235-240, August-2017. ISSN: 2249-
6890, Indexed in Scopus.
23. M. Sekar, I. Kantharaj, Amit Siddhappa, “Machining Chatter Analysis for High Speed
Milling Operations” IOP Conference series: Materials Science and Engineering,
Volume.247, No.1. pp. 012014, October 2017, (Scopus), ISSN: 757-899X.
24. M. Sekar, B. Suresha, I. Kantharaj, “Design of Smooth Ramp Feedrate for Machining
Complex NURBS Paths”, IOP Conference series: Materials Science and Engineering,
Volume.247, No.1, pp. 012017, October 2017, (Scopus), ISSN: 757-899X
25. N.Venkatesh, M.Srinivasa Rao and A.Lakshmu Naidu, “Evaluation of High Speed
Diesel Engine Performance and Characteristics of its Emissions with Carbon Nanotubes
added Ethanol-Diesel Blends”, International Journal of Mechanical and Production
Engineering Research and Development, Vol. 7, Issue 4, pp. 439-446, August 2017.
(ISSN(E): 2249-8001) (Indexed in Scopus)
26. D. Srinivasa Kumar “Effect of working capital on firms Profitability: A Pragmatic Study
with reference to Pharmaceutical Companies in India”, International Journal for
Advanced Research, Vol. 5, Issue No. 7, pp. 668-672, 2017.
27. Chiranjeeva Rao Seela, B. Ravi Shankar, D. Kishore and M.V.S. Babu, “Experimental
Analysis on a DI Diesel Engine with Cerium-oxide-added Mahua Methyl Ester Blends”,
International Journal Ambient Energy, Published online on 10 th August, 2017. (ISSN
2162-8246) (Indexed in ESCI)
28. S. Chiranjeeva Rao, A. Saravana Kumar and G. Chandra Sekhar, “Influence of Nano
Added Mme Blends on CI Engine based on DOE Concept”, International Journal of
Mechanical Engineering and Technology (IJMET), Vol. 8, Issue 7, pp. 860-868, July
2017. (ISSN: 0976-6359, Indexed in Scopus)
29. D.Venkata Rao, “A Subassembly Identification Method for Optimal Assembly Sequence
Generation”, International Journal of Mechanical Engineering and Technology (IJMET),
Vol. 8, Issue 7, pp. 449-454, July 2017. (ISSN: 0976-6359, Indexed in Scopus)
30. G. Musalaiah, B.V. Suresh, Monica Tanniru and P. Ramakrishna Reddy, “Development
and Mechanical Characterization of Glass Fiber Reinforced Polymer Composite”,
 International Journal of Mechanical Engineering and Technology (IJMET), Vol. 8, Issue
7, pp. 231-239, July 2017. (ISSN: 0976-6359, Indexed in Scopus)
31. G.Musalaiah, Y.Shireesha, M.V.Babu Tanniru and U.Pranavi, “Flexural Strength
Enhancement of Glass Fiber Reinforced Polymer Composite”, International Journal of
Mechanical Engineering and Technology (IJMET), Vol. 8, Issue 7, pp. 240-246, July
2017. (ISSN: 0976-6359, Indexed in Scopus)
32. Simhadri Kambala, Ibrahim Mohaamad, “A Study on the Performance of An Ejector
Expansion Refrigeration (EERS) System using Various Refrigerants and Geometric
Parameters”, International Journal of Mechanical Engineering and Technology (IJMET),
Vol. 8, Issue 7, pp. 992-1000, July-2017. (ISSN: 0976-6359, Indexed in Scopus)
33. G.V.S.S.Sharma, P.Srinivasa Rao, B.Surendra Babu, “Process capability improvement
through DMAIC for aluminum alloy wheel machining”, Journal of Industrial
Engineering International, Published online on 24 th July, 2017. (ISSN: 2251-712X,
Indexed in Scopus) Q1
34. G.V.S.S. Sharma and M. V. A. Raju Bahubalendruni, “An Automated Computer Aided
Procedure for Exploded View Generation”, International Journal of Performability
Engineering, Vol. 13, No. 4, pp. 390-399, July 2017. ISSN: 0973-1318 (Indexed in
Scopus) Q4
35. P. Govinda Rao, P. Srinivasa Rao and B.B.V.L. Deepak, “GRNN- Immune Based
Strategy for Estimating and Optimizing the Vibratory Assisted Welding Parameters to
Produce Quality Welded Joints”, Engineering Journal, Vol. 21, Issue 03, pp. 251-267,
July 2017. (ISSN: 0125-8281. Indexed in Scopus and ESCI) Q3
36. P.N.L. Pavani, C.L.V.R.S.V. Prasada and K. Ramji, “Experimental Study &
Optimization of Machining Parameters in Turning of AISI 1040 Steel with Micro-
grooved WC Cutting Tools”, Engineering Journal, Vol. 21, Issue 04, pp. 155-169, July
2017. (ISSN: 0125-8281. Indexed in Scopus and ESCI) Q3
37. S. Rajesh, Kumar and P. Sai, Chaitanya, "Impact of Emulsification of Bio Diesel Blends
on a Diesel Engine- A Recent Review", International Journal for Research in Applied
Science & Engineering Technology, Vol. 5, No. 6, pp. 7-12, 2017.
38. Chiranjeeva, Rao, Seela and K. Sathi, Reddy and N.Ramesh, "Analysis of turbocharged
DI Diesel Engine Fuelled With Linseed Methyl Ester", International Journal of Applied
Environmental Sciences, Research India Publications, Vol. 12, No. 6, pp. 1159-
1166,2017.
39. BBVL Deppak and MVA Raju, Bahubalendruni, “Numerical analysis for force
distribution along the swing jaw plate of a single toggle jaw crusher”,World Journal of
Engineering, Emerald Insight publisher, Vol. 14, No. 3, pp 255-260, 2017 (scopus,
ECSI) Q3
40. BBVL Deppak and MVA Raju, Bahubalendruni, “ Development of a Path Follower in
Real Time Environment”, World Journal of Engineering, Emerald Insight publisher,
2017. (scopus, ECSI) Q3
41. D Venkata, Rao and A Lakshmu, Naidu and Srinivas, Kona, “ Design and Simulations
of Walk Link”,International Journal of Engineering Trends and Technology, Vol 47, No.
8, pp 468-473, 2017
42. V Rambabu and P Sai, Chaitanya and K Prasad, Rao, “ Investigtion on Performance of
diesel engine using Al2O3 nanofluid as coolant”,Advances in Science and Technology
 Research Journal, Lublin University of Technology, Poland, Vol.11, No 2, pp 58-64,
2017. (ECSI)
43. M Srinivasa, Rao and N Venkatesh and A Lakshumu, Naidu, “ A Review on
Performance of Diesel Engines by using Biodiesel blends from Different
oils”,International Journal for Research and Development in Technology, Vol. 7, No. 6,
pp. 135-143, 2017
44. A Lakshumu, Naidu and PSV Ramana, Rao, “ A Review on Chemical Properties of
Biodiesel from Sorghum Oils”, International Journal of ChemTech Research , Sai
Scientific Communications, Vol. 10, No. 3, pp 156-161, 2017 (scopus, ECSI)
45. B Venkata, Suresh and P Govinda, Rao and G Musalaiah and P Srinivasa and Rao, “
Influence of Vibratory Weld Conditioning on Hardness of Lap Welded
Joints”,International Journal of Mechanical Engineering and Technology, IAEME
Publications , Vol. 8, No. 1, pp 169-177, 2017 (Scopus Indexed)
46. G Musalaiah and B Venkata, Suresh and P Govinda, Rao and P Srinivasa and Rao, “
Shear Strength Enhancement in Vibratory Lap Welded Joints”,International Journal of
Mechanical Engineering and Technology, IAEME Publications, Vol. 8, No.1, pp. 160-
168, 2017. (Scopus Indexed)
47. P.N.L. Pavani, R. Pola Rao, C.L.V.R.S.V. Prasasd, “Synthesis And Experimental
Investigation Of Tribological Performance Of A Blended (Palm And Mahua) Bio-
Lubricant Using The Taguchi Design Of Experiment (Doe)”, International Journal of
Technology, Volume.8, No-3, pp- 418-427, 2017. ISSN 2086-9614, Indexed in Scopus,
Impact Factor: 0.123 (SJR) Q2
48. P.N.L. Pavani, R. Pola Rao, K. Santa Rao, “Performance Assessment and Mathematical
Modeling of Process Parameters in Electrical Discharge Machining of EN-31 Tool Steel
Material Using Taguchi DOE”, Engineering Journal, Volume.21, Issue-2, pp- 227-236,
March-2017. ISSN 0125-8281, Indexed in ECSI & Scopus, Impact Factor: 0.23 (SJR)
Q3
49. M. Vykunta Rao, P. Srinivasa Rao and B. Surendra Babu, “ Vibration Effect on the
Impact Strength of Al 5052-H32 Weldments”, Journal of Mechanical Engineering
Research and Developments, Vol. 40, No.01, pp-311-316, 2017. (ISSN: 1024-1752)
(Indexed in Scopus)
50. V. Chitti Babu, K. Santa Rao, P. Govinda Rao and M.V.S. Babu, “Evaluation of Stress
Intensity Factors of Different Materials: A Finite Element Approach”, International
Journal of Chemical Sciences, Vol. 14, Issue 4, pp- 1886-1892, 2016. (ISSN 0972-768X)
(Indexed in Scopus) (Submitted in April 2017)
---------------------------------------------------------------------------------------------------------------------

2016-2017:

2016-2017:
National Conference:
1. M.Srinivasa Rao, “Reliability Analysis based on Condition Monitoring of Process
Equipments”, presented at two day National Conference on Recent Advances in
Mechanical Engineering (RAME-2017), Organised by the Department of Mechanical
 Engineering, Andhra University College of Engineering, Visakhapatnam, during March
10th – 11th 2017.

2016-2017:
National Journal:
-------------NIL------------

2016-2017:
International Conference:
1. P. Sai Chaitanya, T.V.S. Siva and K. Simhadri, “Production and Purification of Biogas
from Biodegradable Waste”, Published in Proceedings of the 1 st International and 18th
ISME Conference, ISME18, Organized by NIT Warangal, Warangal, February23 rd – 25th,
2017.
2. A. Lakshumu Naidu, P. S. V. Ramana Rao, P. Suman, M. V. A. Raju Bahubalenruni, "
Processing and Mechanical behavior of Nagavali clay for layered Silicate Composite
Materials”, International Conference on Advances in Materials and Manufacturing
(ICAMM- 2016), Organized by University College of Engineering, Osmania University
and DRDO, Hyderabad, 8th to 10th, December 2016.
3. G.V.S.S. Sharma, P. Srinivasa Rao, B. Surendra Babu, "A Spatial Visualization
Methodology in Brainstorming the Casual Factors for Process Deviations in
Manufacturing”, 6th International & 27th All India Manufacturing Technology, Design
and Research Conference (AIMTDR-2016), Organized by College of Engineering, Pune,
Maharastra, 16th to 18th December 2016.
4. G.V.S.S.Sharma, P. Srinivasa Rao, B. Surendra Babu, C.L.V.R.S.V. Prasad, T.R. Krishna
Mohan, "Some Investigations on sandblasting parameters in Die Casting of Alloy
Wheels”, 6th International & 27th All India Manufacturing Technology, Design and
Research Conference (AIMTDR-2016), Organized by College of Engineering, Pune,
Maharastra, 16th to 18th December 2016.
5. P. Suman, A. Lakshumu Naidu, P.S.V. Ramana Rao, "Processing and mechanical
behavior of hair fiber reinforced polymer matal matrix composites", International
Conference on Recent Innovations in Engineering and Technology (ICRIET-2k16),
Organized by Gandhi Institute of Engineering and Technology, Gunpur on 5th & 6th
November-2016

2016-2017:
International Journals:
1. A.K.Matta, “Modeling of micro turbine for rapid prototyping”, International Journal for
Modern Trends in Science and Technology, Vol. 2, Issue.7, pp. 19 to 22, July 2016.
(Indexed in Thomson reuter end notes) (Submitted in April 2017)
2. A.K.Matta, “Preparation and toughness studies of Acetal (POM) & PTFE blend”,
International Journal for Modern Trends in Science and Technology, Vol. 2, Issue 12, pp.
63-67, December 2016. (Submitted in April 2017)
3. M.Vykunta Rao, P.Govinda Rao and P.Srinivasa Rao, “Development of a Prediction Tool
for Tensile Strength of the Welded Joints prepared by Vibratory Welding Process”,
Material Focus Journal, Vol. 6, No. 3, pp 319-324, June 2017. (Indexed in Emerging
Sources Citation Index (ESCI) Web of Science (Thomson Reuters)) (ISSN: 2169-429X
(Print) EISSN: 2169-4303 (Online))
4. K.Santa Rao, C.L.V.R.S.V. Prasad and G. Swami Naidu, “Experimental Investigation to
Study the Viscosity and Dispersion of Conductive and Non- Conductive Nano Powders
Blended Dielectrics”, Advances in Sciences and Technology Research Journal, Vol. 11,
Issue 1, March 2017. (IISN: 2299-8624, Indexed in Emerging Sources Citation Index
(ESCI) Web of Science (Thomson Reuters))
5. V.Jagadeesh, K.Venkata Subbaiah, P.Govinda Rao and P.Jamaleswara Kumar,
“Sustainable Development in Process Industries: A Review”, International Journal of
Chemical Sciences, Vol. 14, Issue 4, pp. 1959-1976, 2016. (ISSN 0972-768X, Indexed in
Scopus)
6. K. Rajendra, M.V.S. Babu, P.Govinda Rao, K.N.S. Suman, “Recent Developments in the
Fabrication of Metal Matrix Composites by Stir Casting Route: A Review”, International
Journal of Chemical Sciences, Vol.14, Issue 4, pp. 2358-2366, 2016. (ISSN 0972-768X,
Indexed in Scopus)
7. P.Sai Chaitanya, V.Rambabu, K.Simhadri, “Investigation on Effect of Water Emulsified
with Diesel by Surfactant addition on Performance and Emission Characteristics of
Diesel Engine”, International Journal of Chemical Sciences, Vol. 14, Issue 4, pp. 2835-
2844, 2016. (ISSN 0972-768X, Indexed in Scopus)
8. T.V.S. Siva, P.Sai Chaitanya, “Optimization of Shell and Tube Heat Exchanger used in a
Rankine Cycle of Exhaust Gas Waste Heat Recovery System using CFD”, International
Journal of Chemical Sciences, Vol. 14, Issue 4, pp. 2247-2258, 2016. (ISSN 0972-768X,
Indexed in Scopus.)
9. A.Rakesh, K.Simhadri, “Experimental Investigation on Performance Characteristics of
Four Stroke Single Cylinder Petrol Engine using a Pre-Heating Set-Up and Fuel Blends”,
International Journal of Chemical Sciences, Vol. 14, Issue 4, pp. 2198-2210, 2016. (ISSN
0972-768X, Indexed in Scopus)
10. B.V.Suresh, Y.Shireesha, P.Govinda Rao, “Performance Analysis of a Four Stroke Petrol
Engine with and without Turbocharger and Emission Analysis using Alternate Fuel”,
International Journal of Chemical Sciences, Vol. 14, Issue 4, pp. 1918-1928, 2016. (ISSN
0972-768X, Indexed in Scopus)
11. A.Lakshumu Naidu and P.S.V. Ramana Rao, “A Review on Chemical Behavior of
Natural Fiber Composites”, International Journal of Chemical Sciences, Vol. 14, Issue 4,
pp. 2223-2238, 2016. (ISSN 0972-768X, Indexed in Scopus)
12. K.Srinivas, A.Lakshumu Naidu and M.V.A. Raju Bahubalendruni, “A Review on
Chemical and Mechanical Properties of Natural Fiber Reinforced Polymer Composites”,
International Journal of Performability and Engineering, Vol. 13, No. 2, pp. 189-200,
March 2017. (ISSN No: 09731318, Indexed in Scopus)
13. P.S.V.Ramana Rao and A.Lakshumu Naidu, “Design and Fabrication of Pedal Operator
Centrifugal Pump”, Open Journal of Technology & Engineering Disciplines (OJTED),
Vol. 2, No. 4, pp. 25-39, December 2016. (ISSN: 2455-6971)
14. A.K.Matta, “Modeling of Micro Turbine for Rapid Prototyping”, International Journal for
Modern Trends in Science and Technology, Vol. 2, Issue.7, pp. 19-22, July 2016
(Indexed in Thomson Reuter end notes)
15. A.K.Matta, “Preparation and Toughness Studies of Acetal (POM) & PTFE Blend”,
International Journal for Modern Trends in Science and Technology, Vol. 2, Issue.12, pp.
63-67, December 2016 (Indexed in Thomson Reuter end notes)
16. P. Govinda Rao, V. Jagadessh, K. Santa Rao, V. Chittibabu, “Performance of Solar
Power Refrigerator using Different Materials: A Comparison”, International Journal of
Manufacturing, Materials, and Mechanical Engineering, Vol. 7, Issue 1, January-March
2017, Indexed in Google Scholar.
17. A. Lakshumu Naidu, V. Jagadeesh, M.V.A.Bahubalendruni, “A Review on Chemical and
Physical Properties of Natural Fiber Reinforced Composites”, International Journal of
Advanced Research in Engineering and Technology (IJARET), Vol. 8, Issue 1, pp. 56–
68, January- February 2017. (Indexes in google scholar.)
18. Vinodbabu Chintada, Sudhakar Uppada, Chiranjeeva Rao Seela, “Design and Fabrication
of Reducing Toxic Particle Silencer”, International Journal of Chemical Sciences, Vol.
14, Issue 4, pp. 2012-2020, 2016. (Indexed in Scopus)
19. G. Vamsi Durga Mohan, K. Santa Rao, P. Srinivasa Rao, “Enhancement in Mechanical
Properties of Vibratory Welded Joints: An Overview”, International Journal of
Mechanical Engineering and Technology (IJMET), Vol. 8, Issue 2, pp. 50–55, February
2017 (Indexed in Scopus, Google Scholar)
20. U. Sudhakar, M. V. A. Raju Bahubalendruni, “DFA Model Through Assembly Contact
Data And Geometrical Feasibility Testing”, International Journal of Mechanical
Engineering and Technology (IJMET), Vol. 8, Issue 2, pp. 131 to 136, February 2017.
(Indexed in Scopus, Google Scholar)
21. G.V.S.S. Sharma, R. Umamaheswara Rao, P. Srinivasa Rao, “A Taguchi Approach on
Optimal Process Control Parameters for HDPE Pipe Extrusion Process”, Journal of
Industrial Engineering International, Springer, doi:10.1007/s40092-016-0179-1, pp 1–14,
24 December 2016. (ISSN: 2251-712X , Indexed in Scopus)
22. Bala Murali Gunji, BBVL. Deepak, MVA Raju Bahubalendruni, and B. B. Biswal.
"Hybridized Genetic-immune Based Strategy to Obtain Feastible Assembly Sequences",
International Journal of Engineering Computations, Vol. 8, 2017 (Published online first).
(ISSN No: 1923-2934, Indexed in Scopus).
23. V. Chitti Babu, K. Santa Rao, P. Govinda Rao, “Factors affecting the Mechanical
Properties of Compact Bone and Minature Specimen Test Techniques: A Review”,
Advances in Science and Technology Research Journal, Vol. 10, No. 32, pp- 169-183,
December 2016. (Indexed in Emerging Sources Citation Index (ESCI) by Thomson
Reuters Web of Science).
24. B.B.V.L.Deepak, M.V.A.Raju Bahubalendruni, and B. B. Biswal. "Development of in-
pipe robots for inspection and cleaning tasks: survey, classification and comparison."
International Journal of Intelligent Unmanned Systems, Vol. 4, Issue 3, 2016. (ISSN No:
2049-6427, Indexed in Scopus).
25. D. Venkata Rao, M.V.S. Babu, K. Santa Rao, P. Govinda Rao, “Experimental
Investigation of Mechanical Behaviour of Tin Alloy based Particulate Metal Matrix
 Compisites”, International Journal of Chemical Sciences, Vol. 14, Issue 3, pp- 1730-
1736, 2016. (ISSN No : 0972-768X, Indexed in Scopus).
26. M. Vykunta Rao, P. Srinivasa Rao and B. Surendra Babu, “ Investigate the Influence of
Mechanical Vibrations on the Hardness of Al5052 Weldments”, Indian Journal of
Science and Technology, Vol. 9, Issue X, October 2016. (ISSN No : 0974-5645, Indexed
in Scopus).
27. P.N.L.Pavani, R. Pola Rao, C.L.V.R.S.V.Prasad, S.Srikiran, “Performance Assesment
and Study of Tribological Properties of Self-lubricating Materials for Dry Lubrication”,
Journal of Mechanical Engineering Research and developments, Volume 39, No.3, 2016,
pp. 670-680. (ISSN No : 1024-1752, Indexed in Scopus).
28. S.Chiranjeeva Rao, B. Ravi Sankar, D. Sai Kiran, “ Influence of biodiesel and its blends
on CI engine performance and emissions: A review”, Biofuels Journal, 2016, Taylor and
Francis group, Accepted for publication on 22 June 2016. (Indexed in SCOPUS and
Thomson Reuters Emerging Sources Citation Index, part of Web of Science, Print ISSN:
1759-7269 Online ISSN: 1759-7277)
29. T.Victor, K.Prasad Rao, B.V.Appa Rao, K.Aditya, “Experimental Investigation on
combustion, emission, performance and cylinder vibration analysis of an IDI engine with
RBME along with isopropanol as an additive”, Accepted for publication on 9 August
2016. (Indexed in SCOPUS and Thomson Reuters Emerging Sources Citation Index, part
of Web of Science, Print ISSN: 1759-7269 Online ISSN: 1759-7277)
30. J.S. Uday Kumar, C.L.V.R.S.V. Prasad, K.Santa Rao, “Simulation Studies of Impact of
Electrode Geometry on Thermal Profiles in Micro EDM by using CFX Tools”,
International Journal of Mechanical Engineering and Technology (IJMET), Vol. 7, Issue
4, pp. 196-204, August 2016. (Impact factor -9.2286 (GISI), ISSN : 0976-6359, Indexed
in Google Scholar).
31. V.Chitti Babu, K.Santa Rao, P.Govinda Rao, M.V.S.Babu, “ Experimental Studies on
Tensile Properties of Various Steels using Miniature Specimens”, International Journal of
Chem Tech Research, Vol. 9, No.8, pp-305-311, 2016. (Impact Factor: 0.241, ISSN
No.:0974-4290, Indexed in Scopus).
32. M. Srinivasa Rao and V.N.A. Naikan, “Review of Simulation Approaches in Reliability
and Availability Modeling”, International Journal of Performability Engineering, Vol. 12,
No.4, pp 369-388, July 2016. (Submitted in August 2016)
33. A. Rakesh and K. Simhadri, “Experimental Investigation on Performance Characteristics
of Four Stroke Single Cylinder Petrol Engine with Ethanol Blends using Pre-heating”,
International Journal of Advanced Technology in Engineering and Science, Vol. 4, Issue
08, pp 194, August 2016. (Impact Factor: 2.870)
34. P. Sai Chaitanya, T.V.S. Siva, B. Suneela Rani, “A Review on optimization of shell and
tube heat exchanger used in Rankine cycle of Exhaust gas waste heat recovery system”,
International Journal of Scientific & Engineering Research, Vol. 7, Issue 6, June 2016.
(Indexed in Google Scholar and Thomson Reuters)
35. B. Venkatanarayana, Ch. Ratnam, R. Umamaheswara Rao and K. Prasad Rao, “Multi-
response optimization of DI diesel engine performance parameters using Karanja methyl
ester by applying Taguchi-based principal component analysis”, Biofuels Journal, Taylor
& Francis group, published online, on 14th July 2016. (Indexed in scopus)
36. C.L.V.R.S.V.Prasad, K.Santa Rao and P.Govinda Rao, “Thermoelectric Power
Generation by Recovering Heat Energy from the Exhaust Gases: A Green Technology
 Approach”, International Journal of Chem Tech Research, Vol. No.9, Issue No.5, pp 577-
584, 2016. (Impact Factor: 0.241) (Indexed in: Scopus) (ISSN No.:0974-4290).
37. Y.Shireesha, B.Venkata Suresh and P.Govinda Rao, “Emission Reduction using Catalyst
Converter”, International Journal of Chem Tech Research, Vol. No.9, Issue No.3, pp 540-
549, 2016. (Impact Factor: 0.241) (Indexed in: Scopus) (ISSN No.:0974-4290).
38. P. Sai Chaitanya, T.V.S. Siva and B. Suneela Rani, “Thermo Electric Power Generation
using Heat from Exhaust Gas – A Recent Review”, Pak. J. Biotechnology, Vol.
13(special issue), pp. 40-44, 2016. (Indexed in Scopus, ISSN No: 1812-1837)
39. P.N.L.Pavani, C.LV.R.S.V.Prasad and K.Ramji, "Review on Influence of Nanocoatings
on Tool Wear and Suggesting Alternate Methods of Coatings", Journal of Machining and
Forming Technologies, Nova Science publishers, Vol.No.7, Issue No. 3-4, pp.1-10,
2016.(Indexed in Scopus) (ISSN No.:1947- 4369)
40. K.Prasada Rao, K Santa Rao, P Govinda Rao, “Experimental Investigation on
performance and Emission Characteristics of a DI Diesel Engine Fuelled with Rice Bran
Oil Methyl Ester and Methanol as an additive ”, International Journal of ChemTech
Research, Vol. No.9, Issue 3, pp 258-266, May 2016. (Impact Factor: 0.241) (Indexed in:
Scopus)
--------------------------------------------------------------------------------------------------------------------
2015-2016:

National Conferences:
-------------Nil------------

National Journals:
1. K.Santa Rao, G.Musalaiah, K.Mohan Krishna Chowdary, “Finite Element Analysis of a Four
wheeler Automobile Car Chassis”, Indian Journal of Science and Technology, Volume 9(2),
January 2016, (Scopus Indexed).

International Conferences:
1. P. Sai Chaitanya, T.V.S. Siva, B. Suneela Rani, “Thermo Electric Power Generation using
Heat from Exhaust Gas – A Recent Review”, 3rd International Conference on Innovations in
Information Embedded and Communication Systems (ICIIECS), Organized by Karpagam
Engineering College, Sponsored by IEEE, March 2016
2. U.Sudhakar, J.Srinivas, “Modeling and Design of a Spherical Parallel Manipulator for
Friction-Stir Welding of Aluminum Alloy Plates”, 2 nd International and 17th National
conference on machines and mechanisms (iNaCoMM 2015), IIT, Kanpur, 16 th to 19th
December, 2015.
3. C.L.V.R.S.V Prasad Chilamakurti, Naga Laxmi Pavani Puvvada, Ramji Koona and Venkata
Ramana Swarna, “Experimental Investigations to Evaluate the Performance of Alternate
Striped Coated Carbide Inserts in Turning of AISI 1040 Steel”, International Manufacturing
Science and Engineering Conference (MSEC2015), , Proceedings of the ASME 2015, pp 1-
10, 8th to 12th June, 2015.
4. V. Chitti Babu, “Fracture Toughness of Reversed Dished End Pressure Vessels”, Asian
International Conference on Science, Engineering & Technology (AAICSET), Akshar
Publications, organized at Hotel Surya, Vadodara during 11th – 12th October, 2014.
(Submitted in May 2015)
International Journals:
1. U. Sudhakar and J. Srinivas, “Impact resistance and hardness modeling of Aluminum alloy
welds using square-headed friction stir welding tool”, IOP Conference series: Material
Science and Engineering, Volume 115, March 2016.
2. M. Srinivasa Rao and V.N.A. Naikan, “A Markov system Dynamics approach for repairable
systems reliability modeling”, International Journal of Reliability, Quality and Safety
Engineering, World Scientific Publishing Company, Volume 23, No.1, 2016.
3. G.V.S.S.Sharma, P.Srinivasa Rao, B.Surendra Babu, “Process-Based Tolerance Assessment
of Connecting Rod Machining Process”, Journal of Industrial Engineering International,
Springer publishers, February 2016.
4. P.N.L.Pavani, C.L.V.R.S.V.Prasad, K.Ramji, S.V.Ramana, “Characterization of Wear and
Prediction of Wear Zone Locations on the Rake Face using Mamdani Fuzzy Inference
System”, Proceedings of the Institute of Mechanical Engineers, Part B: Journal of
Engineering Manufacture, January 27, 2016.
5. P.N.L. Pavani, R.Pola Rao, S. Srikiran, “Performance Evaluation and Optimization of Nano
Boric Acid Powder Weight Percentage Mixed with Vegetable Oil using Taguchi Approach”,
Journal of Mechanical Science and Technology (Springer), Volume 29, Issue 11, , pp- 4877-
4883, 2015.
6. K. Simhadri, P. Srinivas, “Performance and Emission Analysis of Partially Insulated Four
Stroke Diesel Engine Fuelled with Blends of Sunflower Methyl Ester”, International Journal
of Engineering Trends and Technology (IJETT), Vol. 27, No. 6, , pp- 287,September 2015.
7. R. Umamaheswra Rao, G.Babji and T.Venkateswara Rao, “Preparation and Characterization
of Non Asbestos Brake Pads”, International Journal of Applied Engineering Research, Vol.
10, No. 15, pp. 35945-35947, September 2015. (Scopus Indexed).
8. G.V.S.S.Sharma, Ravi Kumar Dumpala, “Teaching of mechanical engineering concepts
through three-dimensional geometric modeling”, International Journal of Mechanical
Engineering Education, September 2015 (Indexed in Scopus)
9. P. Govinda Rao, P. Srinivasa Rao, A. Gopala Krishna, “Evaluating the bending strength of
the vibratory welded joint using regression technique”, International Journal of offshore and
Polar Engineering (IJOPE), Vol. 25, No. 3, pp 227-230, September 2015. (Indexed in SCI)
10. Ch. Naveen Kumar, K. Prasad Rao, “Experimental Investigation on performance and
emission characteristics of a DI Diesel engine fuelled with Palm oil Methyl Ester and
Methanol as an additive”, International Journal of Engineering Trends and Technology
(IJETT), Vol. 26, No. 3, pp 132, August 2015.
11. V. Joshua Jaya Prasad, V. Rambabu, “Combustion and performance analysis of direct
injection, compression ignition engine fuel with preheated neat cotton seed methyl ester”,
Biofuels, Taylor & Francis Group, June 2015.
12. P. Govinda Rao, P. Srinivasa Rao, A. Gopala Krishna, “Flexural Strength Improvement of
Welded Joints Prepared by Vibratory Welding Process”, International Journal of
Manufacturing, Materials, and Mechanical Engineering, Vol. 5, Issue 4, pp 1-16, , October-
December 2015. (Indexed in SCOPUS)
13. P. Govinda Rao, P. Srinivasa Rao, A. Gopala Krishna, “Impact Strength Improvement of
Butt Welded Joints prepared by Vibratory Welding Process”, Journal of Manufacturing
Technology Research, Nova Science Publishers Inc., Vol. 6, No. 3-4, July 2015. (Abstracted
and Indexed in SCOPUS)
14. S. Chiranjeeva Rao, M. Srinivasa Rao, “Performance Analysis of DI Diesel Engine Fuelled
with Diesel along with Nano Additives”, International Journal of Engineering Trends and
Technology (IJETT), Vol. 24, No. 2, PP- 107, June-2015. (ISSN: 2231-5381, IF-1.795,
Indexed in- Cross ref, DOAJ, Google Scholar, Index Copernicus.)
15. T.D.J Prabha, P. Ramesh Babu, V. Rambabu, “Diesel Engine Performance Improvement
with Biodiesels- A Review”, International Journal of Thermal Technologies, INPRESSCO,
Vol.5, No.2, pp. 106-111, June 2015 (Indexed in Google Scholar, Index Copernicus)
16. M. Srinivasa Rao, V.N.A. Naikan, “Availability Modeling of Repairable Systems using
Markov System Dynamics Simulation”, International Journal of Quality & Reliability
Management, Emerald Group Publishing Limited, Volume 32, No.5, pp- 517-531, 2015.
(Scopus Indexed)
17. K. Prasad Rao, B.V. Appa Rao, V. Rambabu, “Heat Release Rate and Engine Vibration
Correlation to Investigate Combustion Propensity of an IDI Engine Run with Biodiesel
(MME) and Methanol Additive as an Alternative to Diesel Fuel”, Biofuels, Taylor & Francis
Group, May 2015. (Online Journal)
18. D. Ravi Kumar, Maneesh Chandran, M.S. Ramachandra Rao, “Engineered CVD Diamond
Coatings for Machining and Tribological Applications”, Journal of the Minerals, Metals &
Materials Society, Springer, May 2015. (Online Journal)
19. P. Sai Chaitanya, M.V.S. Pavan Kumar, P. Suneela Rani, “Design Of An Air Conditioning
Unit For Swift-Diesel Engine Using the Heat Carried by Exhaust Gases and Cooling Water”,
International Journal of Applied Engineering Research, Special Issue Vol 10, No. 20, , Pg
No- 19770-19774, 2015. (IJAER-Scopus Indexed)
20. CH. Vinod Babu, S. Chiranjeeva Rao, M. Vykunta Rao, “Modal and Static Analysis of
Automotive Chassis Frame by Using FEA”, International Journal of Applied Engineering
Research, Special Issue Vol 10, No. 20, Pg No- 19775-19777, 2015. (IJAER-Scopus
Indexed)
21. B. V. Suresh, Y. Shireesha, B. Sateesh, “Evolution of Performance of Primary and Secondary
air Preheaters”, International Journal of Engineering Trends and Technology (IJETT),
Volume 22, No 7, pp:311-314, April-2015.
22. CH. Vinod Babu, S. Chiranjeeva Rao, M. Vykunta Rao, “Structural Analysis of Eicher 11.10
Chassis Frame”, International Journal of Engineering Trends and Technology (IJETT),
Volume 22, No 7, pp: 315-319 April-2015.
23. Sudheer Kumar Nagothu, Joseph Praveen Kumar, G. Anitha, “Lossless Compression of
Hyperspectral images using Differential pulse code modulation”, International Journal of
Applied Engineering Research, Special Issue, Vol 10, No. 20, Pp: 15613-15617, 2015.
(IJAER-Scopus Indexed)
24. A. Sudhakar, M. Satyanarayana, M. Sunil Prakash, Sudhir Kumar Sharma, “WLAN Band
Notched UWB Square Monopole Antenna with Swastik and C Shaped Slot”, International
Journal of Applied Engineering Research, Special Issue, Vol 10, No. 20, Pg No- 19764-
19769, 2015. (IJAER-Scopus Indexed)
25. M.Vykuntarao, S.Chiranjeeva Rao, Ch.Vinod Babu and M.V.Sekhar Babu “Influence of
reinforced particles on the Mechanical properties of Aluminium Based Metal Matrix
Composite – A Review”, Chemical Science Review and Letters, Vol 4, Issue 13, pp 335-341,
May 2015.

---------------------------------------------------------------------------------------------------------------------
2014-2015
National Conferences:
-------------NIL------------
National Journals:
-------------NIL------------
Inter National Conference:
1. C.L.V.R.S.V Prasad Chilamakurti, Naga Laxmi Pavani Puvvada, Ramji Koona and Venkata
Ramana Swarna, “Experimental Investigations to Evaluate the Performance of Alternate
Striped Coated Carbide Inserts in Turning of AISI 1040 Steel”, International Manufacturing
Science and Engineering Conference (MSEC2015), , Proceedings of the ASME 2015, pp 1-
10, 8th to 12th June, 2015.
2. A. Sudhakar, M. Sunil Prakash, Sudhir Kumar Sharma, “Single Band-Notched UWB square
monopole antenna with double U- slot and key shaped slot”, 5 th IEEE International
Conference on Communication systems and Network Technologies, MIR Lab, Gwalior, 4 th -
6th April 2015.
3. M. Anil Kumar, V. Purushottam, “Analysis of the Novel Brake Rotor using FEM”, 5 th
international & 26th All India Manufacturing Technology, Design and Research Conference,
December 12-14th, 2014, IIT Guwahati, Assam India.
4. N. Sudheer Kumar, G. Anitha, A. Sudhakar, “Navigation Aid for People(Joggers and
runners) in the unfamiliar Urban Environment using Inertial Navigation”, Sixth International
Conference on Advanced Computing (ICoAC’ 14), Department of Computer Technology,
MIT Campus, Anna University, Chennai & IEEE Madras Section, December 17-19, 2014
5. N. Sudheer Kumar, Om Prakash Kumar, G. Anitha, “Autonomous Monitoring and
Attendance system using Inertial Navigation system and GPRS in predefined Locations”,
Third International Conference on Eco-friendly Computing and communicational systems
(ICECCS 2014), NITK, Surathkal, December 18-21, 2014.
6. Vijaya Sekhara Babu.M, A. Ramakrishna, K.N.S. Suman, “Experimental Investigation of
Mechanical behavior of Babbitt based particulate MMC fabricated using sand and die casting
techniques”, International Symposium for Research Scholars (ISRS) - 2014, IIT-Madras, PS
(Poster Session) IX-2, Materials Processing section, 12-12-2014.
7. Ravikumar Dumpala, B.V. Suresh, K. Ramasubramanian, V. Chittibabu, M.S. Ramachandra
Rao, “Tribological and machining performance of the CVD diamond coatings against Alm –
30SiCp MMC”, International Conference on Advances in Design and Manufacturing
(ICAD&M’ 14), NIIT, Tiruchirappalli, December 5-7, 2014.
8. R. Pola Rao, P.N.L. Pavani, S. Sri Kiran, “ Investigation and Optimization of the Effect of
Titanium dioxide and Nanobaric acid in machining AISI 1040 Steel”, Interational colloquium
on materials, manufacturing and metrology, ICMMM2014, August 8-9, 2014, IIT Madras,
Chennai, India.
Inter National Journals:
1. S. Chiranjeeva Rao, M. Srinivasa Rao, “Performance Analysis of DI Diesel Engine Fuelled
with Diesel along with Nano Additives”, International Journal of Engineering Trends and
Technology (IJETT), Vol. 24, No. 2, PP- 107, June-2015. (ISSN: 2231-5381, IF-1.795,
Indexed in- Cross ref, DOAJ, Google Scholar, Index Copernicus.)
2. T.D.J Prabha, P. Ramesh Babu, V. Rambabu, “Diesel Engine Performance Improvement
with Biodiesels- A Review”, International Journal of Thermal Technologies, INPRESSCO,
Vol.5, No.2, pp. 106-111, June 2015 (Indexed in Google Scholar, Index Copernicus)
3. M. Srinivasa Rao, V.N.A. Naikan, “Availability Modeling of Repairable Systems using
Markov System Dynamics Simulation”, International Journal of Quality & Reliability
Management, Emerald Group Publishing Limited, Volume 32, No.5, pp- 517-531, 2015.
(Scopus Indexed)
4. K. Prasad Rao, B.V. Appa Rao, V. Rambabu, “Heat Release Rate and Engine Vibration
Correlation to Investigate Combustion Propensity of an IDI Engine Run with Biodiesel
(MME) and Methanol Additive as an Alternative to Diesel Fuel”, Biofuels, Taylor & Francis
Group, May 2015. (Online Journal)
5. D. Ravi Kumar, Maneesh Chandran, M.S. Ramachandra Rao, “Engineered CVD Diamond
Coatings for Machining and Tribological Applications”, Journal of the Minerals, Metals &
Materials Society, Springer, May 2015. (Online Journal)
6. P. Govinda Rao, P. Srinivasa Rao, A. Gopala Krishna, “A smart Prediction tool for
estimating the impact strength of welded joints prepared by vibratory welding process”,
Journal of Process Mechanical Engineering(Institute of Mechanical Engineers), Accepted on
2nd March 2015, Published online early on 29th March, 2015
(http://pie.sagepub.com/content/early/recent).
7. Y. Shireesha, S. Karthik, L.V.N. Ch. Mohan, “Comparison of different car cooling systems
with portable car cooling system”, IOSR Journal of Mechanical and Civil Engineering,
Volume-12, Issue 2,Version- 5, pp- 50-57, March-Apr 2015.
8. K. Simhadri, G.V.D. Mohan, P. Sai Chaitanya, “Comparison of the overall heat transfer
coefficient value of double pipe heat exchanger without and with various twisted inserts of
different twist ratios”, IOSR Journal of Mechanical and Civil Engineering, Volume-12, Issue
2,Version- 6, pp-115-124, March-Apr 2015.
9. S. Chiranjeeva Rao, Vinod Babu Ch, M. Vykunta Rao, “Techniques of Tar Removal from
Producer Gas- A Review”, International Journal of Innovative Research in science,
Engineering and Technology, Vol.4, Issue 2, Pp:258-266, Ess & Ess Research Publications
,February 2015.
10. P. Govinda Rao, P. Srinivasa Rao, A. Gopala Krishna, “Review on Residual Stresses in
Welded Joints prepared under the influence of Mechanical Vibrations”, Journal of
Manufacturing Technology Research, Volume 6, Number 1-2. , Nova Science Publishers
11. VSSSR Guptha,K.Mallic,P.Govinda Rao” Two Dimensional Modeling of Oil Bearing
Geological Structures using Finite Element Method”Acta Engineering International,VOL.2
Issue 1 PP;30-36 2014, Aufa periodicale
12. K.Ch.Sekhar, V.Gagadeesh,VSSR Guptha,Jkalpana” Design and Fabrication of Manual
Peeling Machine “Acta Engineering International,VOL.2 Issue 1 PP;19-26 2014, Aufa
periodicale
13. K Prasad Rao, B.V. Appa Rao, “Performance and emission characteristics of an indirect
diesel injection engine fueled with Mahua methyl ester and methanol as an additive”,
Biofuels Journal, Taylor & Francis Group, Biofuels (2014) 5(4), 369-378.
14. K. Simhadri, P.Sai Chaitanya, G.V.D. Mohan, “Experimental Analysis On Performance
Improvement Of Diesel Engine Utilizing Alternate Fuels”, IOSR Journal of Mechanical and
Civil Engineering (IOSR-JMCE), Volume 12, Issue 1(Ver. I - Jan-Feb. 2015), PP 8-13.
15. P. Sai Chaitanya, B. Suneela Rani, K. Vijaya Kumar, “Thermal Analysis of Engine Cylinder
Fin by Varying Its Geometry and Material”, IOSR Journal of Mechanical and Civil
Engineering (IOSR-JMCE), Volume 11, Issue 6 Ver. I (Nov- Dec. 2014), PP 37-44.
16. Maneesh Chandran, C.R. Kumaran, Ravikumar Dumpala, P. Shanmugame, R.Natarajan,
S.S. Bhattacharya, M.S. Ramachandra Rao, “Nanocrystalline diamond coatings on the
interior of WC–Co dies fordrawing carbon steel tubes: Enhancement of tube properties”,
International journal of Diamond and related materials journal, Vol 50.PP:33-37, NOV 2014,
ELSEVIER
17. M. Srinivasa Rao, V.N.A. Naikan, “Reliability analysis of repairable systems using system
dynamics modeling and simulation”, Journal of Industrial Engineering International (2014),
Volume 10, article id.69 , Springer.
18. A.K.Matta, R. Umamaheswara Rao, K.N.S. Suman, V. Rambabu, “Preparation and
characterization of biodegradable PLA/PCL Polymeric blends”, 3rd International Conference
on Materials Processing and Characterization (ICMPC 2014), Procedia materials science
6(2014) 1266-1270.
19. P.N.L. Pavani, C.L.V.R.S.V. Prasad, K. Ramji, S.V.Ramana, “Design and Fabrication of
Micro Grooves on the Rake Face of Tungsten Carbide cutting tools with an array of Nano
films”, International conference on Advances in manufacturing and material engineering,
AMME-2014, Procedia materials sciemce 5(2014) 2039-2045.
20. P.N.L. Pavani, B.K. Prafulla, R. Pola Rao, S. Srikiran, “Design, Modeling and Structural
analysis of wave springs”, 3rd International Conference on Materials Processing and
Characterization (ICMPC 2014), Procedia materials science 6(2014) 988-995.
21. P. Srinivasa Rao, C.L.V.R.S.V. Prasad, G.V.S.S. Sharma, M.V.S. Babu, “Experimental
Investigations and study of tribological behavior of alternate WC coated bearing surfaces”,
International conference on Advances in manufacturing and material engineering, AMME-
2014, Procedia materials sciemce 5(2014) 1165-1173.
22. V. Jagadeesh, Yegireddi Shireesha, Ch. Vinod Babu, Bade Venkata Suresh, K.CH. Sekhar,
“Optimization and Fabrication of Dome shaped Crop Dryer”, IOSR Journal of Mechanical
and Civil Engineering, Volume11, Issue -5, Ver-II , PP- 65-71. (September-October-2014),
23. D. Venkata Rao, K. Prasad Rao, S. Chiranjeeva Rao, R. Umamaheswara Rao “Design and
fabrication of power generation system using speed breaker”, International Journal of current
engineering and technology, Volume-4, Issue-4, PP 2697 – 2702 August-2014.
24. K. Prasad Rao, V. Rambabu, K. Santa Rao, D. Venkata Rao, “ Mobile Operated
Lawnmower”, International Journal of Mechanical Engineering and Robotics Research,
Volume-3, Issue-4. PP 67 – 72 August-2014.
25. Ravi kumar Dumpala, Maneesh Chandran, S. Madhavan, B. Ramaoorthy, M.S. Ramchandra
Rao, “High Wear Performance of the dual-layer graded composite diamond coated cutting
tools”, International Journal of Refractory Metals and Hard Materials(Elsevier), Volume 48,
PP 24- 30, Jan 2015.Elsevier
26. U. Sudhakar, J. Srinivas “ Path Planning of Parallel Manipulator linkage for Laser-Welding
process”, International Journal of Engineering Research and Sports Science, Volume-1,
Issue-7, July-2014
27. P. Govinda Rao ,P. Srinivasa Rao and A.Gopala Krishna “Mechanical Properties
improvement of weldments using vibratory welding system “Journal of Engineering
Manufacture (Proceedings of the institute of mechanical engineers), Volume-228, Issue-5,
May2014 .
28. G.V.S.S. Sharma and P. S. Rao “A DMAIC approach for process capability improvement an
engine crankshaft manufacturing process “ Journal of Industrial Engineering International
Volume-10, Accepted- 15 May2014, Published(online)-27 May 2014 , Springer

2013-2014

National Conferences:
1. M.Srinivasa Rao “A frame work for reliability analysis for boiler tubes of thermal
power plants ” one day National Conference on Recent Advances in Mechanical
Engineering (NCRAME 14 ), JNTUCOE, Vizianagaram on 22 March 2014
2. K.Vijaya Kumar, P. Saicahitanya“ Periodic simulation for fluid flow in tubes using CFD “
National mconference at Mallaredyy Engineering College on 20 to 21 Sep-2013
National Journals:
-------------NIL------------
Inter National Conference:
1. P. N. L. Pavania* , Dr.C.L.V.R.S.V.Prasadb , Dr.K.Ramjic,Dr.S.V.Ramanad, “Design and
Fabrication of Micro Grooves on the Rake Face of Tungsten Carbide Cutting Tools with
an Array of Nanofilms”, International Conference on Advances in Manufacturing and
Materials Engineering, AMME 2014, NITK, Surathkal, during 27 th-29th March 2014. AMME
2014 proceedings will be published by Elsevier journal” Procedia Material Science”.
2. P.Srinivasa Rao, CLVRSV Prasad “ Experimental Investigations and Study of Tribological
behavior of alternate WC coated bearing surfaces “ International Conference on Advances in
Manufacturing and Materials Engineering, AMME 2014, NITK, Surathkal, during 27 th-
29th March 2014. AMME 2014 proceedings will be published by Elsevier journal” Procedia
Material Science”.
3. P. N. L. Pavania*,B.K.Prafullab,R.Pola Raoc, S.Srikirand, “Design, Modeling and Structural
Analysis of Wave Springs”, 3rd International Conference on Materials Processing and
Characterization (ICMPC 2014), GRIET, Hyd, during 8 th - 9th March 2014. ICMPC
proceedings will be published by Elsevier journal” Procedia Material Science”.
4. PNL Pavani, CLVRSV Prasad ,SV Ramana and K.Ramji « The Infuence of Array of
Alternative Nan coatings on The Characterization of Wear Zones on the Rake Face of
Tungsten Carbide Cutting Tools « International Conférence on
PRECISION,MESO,MICRO and Nano Engineering , Dec 13- 15 2013, NIT , Calicut Kerala
, India.
5. CLVRSV Prasad , S.V.Ramana and P.L.Pavani “Experimental investigations of wear
zones on the rake face of Tungsten Carbide Inserts Under dry Machining Conditions”
International Conference on Modeling of Machining Operations ( CIRP CMMO ). 14 CIPR ,
PP :, June 2013
6. A.K . Matta R.U.M.Rao and V. Rambabu “Preparation and characterization of ternary
A blends composed of polylactide, poly ( e-carrolactone) and MWCNT” International
conference on Engineering materials and processes(ICEMAP, PP :, June 2013

Inter National Journals:

1. K.Prasada Rao and BV Appa Rao “ Investigation on Emission Characteristics of An
Indirect Injection ( IDI ) Diesel Engine Replacing Conventional Diesel with neat Mahua
Methyl Ester (MME) Blended with Methanol as an Additive“ International Journal
 Engineering Research and Technology ( IJERT) Vol.2. Issue. –II, PP 3462 – 3471, Nov,
2013
2. K.Prasada Rao and BV Appa Rao “ Combustion and Emission Analysis of IDI - Diesel
Engine Operating with neat Mahua Methyl Ester (MME) Blended with Methanol as an
Additive“ International Journal Engineering Research and Applications ( IJERA) Vol.3.
Issue. 6, PP 1642 – 1649, Nov- Dec 2013
3. GVSS Sharma and P Srinivasa Rao “ Processing Capability Improvement of an engine
connecting rod machining process “ Journal of Industrial Engineering International( Springer
) 9,37 2013
4. P.Sai Chaitanya, K.Simhdri & G.Vamisi Durga Mohan “ Experimental Investigation on
Impact of Hot and Cold Exhaust Gas Recirculation on Diesel Engine with Centane
Improver“ International Journal of Current Engineering and Technology ( IJCET) Vol.3.
No. -5, PP 1794 – 1798, ISSN 2277-4106 5 Nov, 2013
5. S. Ravi Babu , K.Prasada Rao and P. Ramesh babu “ Performance Evaluation of an IC
Engine in the presence of a C-D Nozzle in the Air intake manifold “ International Journal
of Current Engineering and Technology ( IJCEAT) Vol.3. issue -4, Pp:1158-
1163,September- October 2013
6. M.Vijaya Sekhar Babu, K.Santa Rao “ Investigation of mechanical behaviour of ilmenite
based al metal matrix particulate composites “ International Journal of Engineering
Research and Technology ( IJMET) Vol.4. issue -5, Pp:111-115,September- October 2013
7. S.Chiranjeeva Rao, D.Venkata Rao and M.Vykunta Rao “ Performance analysis of an air
driven engine modified from si engine “ International Journal of Engineering Research
and Technology Vol.3 No.4 Pp:1440- 1447October 2013.
8. G.V.S.S.Sharma, V.Jagadeesh “ Process capability improvement – a case study of an
engine connecting rod manufacturing process “ International Journal of Engineering
Research and Technology ( IJMET) Vol.4. issue -5, Pp:116-129..September- October 2013
9. G.V.S.S.Sharma, V.Jagadeesh “ Process capability improvement – a case study of crank
pin-bore honing operation of an engine connecting rod manufacturing process “
International Journal of Advanced Research in Engineering and Technology ( IJARET)
Vol.4. issue -6, Pp:84-97.,September- October 2013
10. K.Prasada Rao, M.Anil Kumar, R.Umamaheswara Rao “The six sigma approach to reduce
specific roll consumption in medium merchant & structural mill” International Journal of
Research in Engineering Science & Advanced Technology [IJREST], Volume-2, Issue-1,
PP 120-129, ISSN: 2250-3676 Aug-Sep 2013.
11. V.Rambabu and Chiranjeeva Rao seela“ Micro Algae as the Dependable Source For
Energy Security “ International Journal of Engineering Research and Technology ( IJERT)
Vol.2. issue -9 Pp:576 – 579, Sep 2013
12. K.Prasada Rao,R. Umamaheswara Rao S.Ravi babu and V.Rambabu “ Optimization of
performance parameters of a diesel engine fuelled with Biofuels “ International Journal
of Thermal Technologies ( IJTT) Vol.3. issue -3 Pp:85 – 92, Sep 2013
13. K.Santha Rao, SV Ramana and CLRSV Prasad “ Influence of solid lubricant emulsion on
surface rough roughness of hardedned steel when machining on shaper “ International
Journal of Mechanical Engineering and Technology ( IJMET) Vol.4. issue -5 Pp:63 – 70,
Sep 2013
14. G.Rama Krishna, Ch. Anil Kumar P. Govinda Rao , V.chitti babu and SV Ramana “ Finete
element Analysis of Residual stresses in welded joints Prepared under Infuence of
 Mechanical Vibrations“ International Journal on Mechanical Engineering and Robotics (
IJMER) Vol.1. issue -1 Pp:85 – 89, Sep 2013
15. U. Sudhakar and J.Srinivas “ A stiffness index prediction Approach 3- RPR planar
parallel Linkage“ International Journal of Engineering Research and Technology ( IJERT)
Vol.2. issue -9 Pp:2747-2752, Sep 2013
16. U. Sudhakar and J.Srinivas “ Design and analysis of X-Y- positioning stage based on
redundant parallel linkage “ International Journal of Research in Engineering and
Technology (IJRET) Vol.2. issue -9 Pp:371 - 377, Sep 2013
17. P. Saichaitanya, K. Simhadri and G.Durgavamsimohan “ Impact of cold and hot exhaust
gas recirculation on Diesel engine “ International Journal of Research and Applications (
IJRA) Vol.3. issue -5 Pp:430 – 434, Sep 2013
18. S.Ravi Babu, P.Ramesh Babu, V.Rambabu “ Effect of some parameters on Thermal
Conductivity of Nano fluids and Mechanisms of Heat Transfer Improvement “
International Journal of Engineering Research and Applications ( IJERA) Vol.3. issue -4
Pp:2136 – 2142, July-Aug 2013
19. LV Steesh V.Chittibabu “ Finite element Analysis of Piezoelectric Transducers “ ITSI
Transactions on Electrical and Electronics Engineering, ( ITSI-TEEE) Vol.1. issue -3 Pp:19
– 30, JUly 2013
20. P.Govinda Rao P.Srinivasa Rao,A Gopalakrishna and CV Sriram “ Improvement of tensile
strength of butt welded joints prepared by vibratory welding process “ International
journal of Mechanical and Technology ( IJMET) Vol.4. issue -4 Pp:53 – 61, July 2013
21. Yegireddi Shireesha SV Ramana, P.Govinda Rao “ Modelling and static Analysis of femur
bone by using different implant materials “ IOSR journal of Mechanical and Civil
Engineering Vol.7. issue -4 Pp:82 – 91, July 2013
22. V.Chittibabu, Mr Bade Venkata Suresh, P.Govinda rao “Determination of Mechanical
Properties of Different Materials Using Inverse Finite Element Procedure for the
Miniature Specimen Test Simulation “ IOSr Journal of Mechanical and Civil Engineering (
ISOR- JMCE ), Volume 6 ,Issue 3 , ,PP25-36 ,May-june 2013
23. Ms J.Kalpana, S.V.Ramana , P.Govinda rao, V.Chittibabu, K.Santa Rao “ Implementation
of Generalized Regression Neural Network to Establish a Relation between Vibration
Paramenters and Time of Vibration for Welded Joints.” IOSr Journal of Mechanical and
Civil Engineering ( ISOR- JMCE ), Volume 6 ,Issue 3 , PP : 36- 42 ,May-june 2013,
24. P.Govinda rao, CLVRSV Prasad, SV ramana and D.Sreeramulu “ Development of Grnn
Based Tool For Hardness Measurement of Homogeneous Welded Joints Under
Vibratory Weld Condition. “International Journal of Advanced Research in Engineering
and Technology (IJARET), Volume 4,issue 4, , Pp : 50- 59 , May –June 2013

2012-2013
National Conferences:
1. S.Ravibabu, P.Beulah, R.Umamaheswara Rao “Enhancement of Heat Transfer using nano
fluids A Review “National Conference for Researchers on Latest Innovations in Mechanical
Engineering (Lime -2013), PP: 41-45,28 April 2013
2. Bade Venkata Suresh, V.Chittibabu, P.Govinda rao “ Inverse Finite Element Procedure
for the Determination of Mechanical Properties of Different Materials Using Miniature
 Specimen Test Simuation “ Proceedings of the National Conference for Researchers on
Latest Innovations in Mechanical Engineering (LIME-2013) PP: 18- 25, 28 April 2013,
3. P.Govinda Rao,P.Srinivasa Rao, A.Gopalakrishna, Sriram CV ” Some Improvements in
Mechanical Properties for Butt Welded Joints of Steels Through Vibratory Welding
Process “ Proceedings of the National Conference for Researchers on Latest Innovations in
Mechanical Engineering (LIME -2013) Pp : 175- 180,27 April 2013.
4. Dr M. Srinivasa Rao, A.Suneetha “ Reliability Evaluation based performance analysis of
a process industry” National Conference of Green Engineering and Technologies -2013on
16th to 17th March 2013 Centurion University of Technology Management Department of
Mechanical Engineering , Odisha.

National Journals : - Nil -

Inter National Conference

1. L.V.Sateesh, V.Chittibabu “Finite Element Analysis of Piezoelectric Transducers”

International Conference on Latest Trends in Engineering and Technology (ICLTET) PP : 65
– 76, 27 April 2013
2. Ramakrishna, Ch.Anil Kumar, P.Govinda Rao, V.Chittibabu, & S.V.Ramana “ Finite
Element Analysis of Residual Stresses in Welded Joints Prepared Under Influence of
Mechanical Vibrations “ International Conference on Latest Trends in Engineering and
Technology (ICLTET), PP : 86-90., 27 April 2013
3. AS Kranthi , AK Matta “ Experimental Heat Transfer and Transient Heat Stress Analysis of
a Brake Rotor “ International conference on advanced trends in polymeric materials, March
1-3 2013, Organized by CIPET Lucknow
4. P.Ramesh Babu , V. Rambabu and S.Ravi babu, “Performance and combustion
characteristics of DI-Diesel engine with neat MME and DEE “ International conference
on energy resources and Technologies for sustainable Development, (ICERTSD-2013),
Howrah, West Bengal Feb 7-9,2013,
5. P.govinda Rao, and S.V. Ramana,“ A finite Element based Analysis of Residual stresses
of welded joint through mechanical vibrations “International conference on advanced
research in Mechanical engineering, Pune,18 - Nov 2012.
6. M srinivasa Rao, A suneetha “A soft computing approach for reliability analysis of a
power plant “International conference on statistics and mathematics in engineering ,
Mogalaraj Puram, Vijayawada 14,15 Sep 2012
7. P Ramesh Babu, N.Haribabu and BV Appa Ra “Combustion Heat Release Estimation and
Cylinder Vibration Time Wave Study to Explore Best Blend of Mahuva Methyl Ester
and Diethyl Ether as Cetane Impover in a Laboratory Based DI-Diesel Engine
“,International Conference on Challenges and Opportunities in Mechanical Engineering,
Industrial Engineering and Management Studies (ICCOMM – 2012) ,MSRIT,Banglore, 11-
13 July 2012
8. Penta Srinivasa Rao S V Ramana “An Artificial Intelligence Approach to Optimize Solid
Lubricant Particle Weight Percentage in the Machining of Hardened Steel “
International conference on Mechanical and Industrial Engineering (ICMIE 2012),
SILCHER, ASSAM, India 12th to 12th August 2012
 International Journals
1. Ms. B.Krishna Prafulla, V.Chittibabu and P.Govinda Rao “CFD Analysis of Convergent –
Divergent Supersonic Nozzle” International journal; of computational Engineering
Research , Vol 3,Issue 5 ,PP 5-16, May 2013
2. V.Chittibabu, Mr.L.V.Sateesh,, P.Govinda Rao “ Dynamic Analysis of Piezoelectric
Transducers Using Finite Element Method “ International journal ogf engineering and
technology , Volume 2,issue 5, May -2013
3. D.Murali mohana Rao,CLVRSV Prasad,T.Ramakrishna “ Experimental and simulated
studies on temperature Distribution for Various Disc Brakes” International journal of
Research in Mechanical Engineering and Technology ,,Vol.3,Issue 1 ,Pp 34-39 April 2013
4. P.Govinda Rao, CLVRSV Prasad, D.Sreeramulu, V.Chittibabu, M.Vykunta Rao
“Determination of Residual Stresses of Welded Joints Prepared Under The Influence of
Mechanical Vibrations by Hole Drilling Method and Compared by Finite Element
Analysis “International Journal of Advanced Research in Engineering and Technology
(IJARET), Volume 4,issue 2, March 2013

5. P.Ramesh Babu , V. Rambabu and S.Ravi babu “ Performance and combustion

characteristics of DI-Diesel engine with neat MME and DEE “ International journal of
Engineering Technology and advanced Engineering, Vol.3.Special issue Pp:153 – 159, 3Feb
2013,
6. V.Rambabu, “Evaluation 0f Performance and Emission of A VCR DI Diesel Engine
Fuelled With Preheated CsME “ Global journal of Research in Engineering, Vol 12, issue
6, Pp: 11-19 Dec – 2012
7. V J J Prasad , P. Ramesh Babu and V Rambabu , ” Investigation on emission and
combustion with 100 % palm kernel methyl ester as fuel on VCR-DI-diesel engine” ,
International journal of energy and power engineering Vol 6, issue 9, Pp: 1416-1423 - 2012
8. S.Chiranjeevarao AV Sitaramaraju V J J Prasad and D Linga Raju, “ Studies of the
emission characteristics of a single cylinder diesel engine fueled with diesel, Linseed
derived derived bio-diesel and its blends “ International journal of Science and
Technology ISSN : 2229-7677 Vol 2, issue 6 pp: 267-278, Aug- Sep - 2012
9. R.Umamaheswara Rao,S.Snatosh Kumar and M.Santhi Kumar “ Preparation and
characterization of polymer nano components for damping “ International journal of
Engineering research and application Vol.2,issue.4 , PP 1451-1458, July-August - 2012
10. A.K.Matta R.Umamaheswara Rao and CLVRSV Prasad “ Construction of a test bench
for bike rim break motor “ IOSR Journal of Engineering, Vol 2,Issue 8, PP 40-44 , August
- 2012
11. M.Santhi Kumar, R. UmamaheswaraoS.Santosh Kumar “ Failure analysis of journal
bearing during startup “ IRACST - Engineering Science and Technology An international
journal (ESTIJ) Vol.2, issue.4, Pp 812-814, August - 2012
12. P.Govinda Rao,Srinivasa rao P,GopalaKrishna A and Sarkar MMM “ Affect of vibratory
welding process to improve the mechanical properties “ International Journal of Modern
Engineering Research (IJMER) Vol.2,Issue 4, PP 2766-2770, July - August 2012,
13. D.Linga Raju S.Chiranjeeva Rao V J J Prasad and AVS Rajau, “Fuelling diesel engine with
diesel, linseed derived biodiesel and its blends at different injection pressures:
performance studies “ International Journal of Management, IT and Engineering
Vol.2,Issue 7 PP 53-65 , July - 2012
14. PS Rao, KMK Chowdari,V Sekhar Babu and P Govinda Rao, “ Synthesis of Nano
Titanium Dioxide Power using MWP (microwave plasma) and its characterization “
International Journal of Modern Engineering Research (IJMER) Vol 2, Issue 3, pp 1150-
1156, May-June 2012.
15. V Rambabu, V J J Prasad and V Rambabu, “ Performance analysis of Di-Diesel engine at
different injection pressures using Jatropha Methyl Ester “ International Journal of
Thermal Technologies Vol 2, issue 2, June - 2012.
16. V J J Prasad and K Prasada Rao , “Performance and Emission Analysis of Diesel Engine
Using Neat Linseed Methyl Ester Along with Methanol as Dual Fuel “ ,International
Journal of Thermal Technologies, Vol 2, issue 2 , June - 2012..
17. A K Matta , P.Ramesh Babu and R Umamaheswara Rao “Design and Analysis of Steam
Turbine Blades using FEM “ International Journal of Mechanical Engineering Research
Volume2,issue 2, pp. 67-73, June - 2012

2011-2012
National Conferences
1. VJJ Prasad “ Use of plastic diesel as fuel for CI Engine “ National conference Modren
trends in Mechanical Engineering (M-TIME) ,Gandhi Institute of Engineering &
Technology, Gunupur, Orissa on 18 -02 - 2012
2. VJJ Prasad and V Rambabu, “ Micro Algae as the dependable source for energy security
“ National Conference of chemical engineers on Bio-fuels towards energy security and
environment protection , Visakhapatnam on 30th Sept and 1st Oct - ,2011
3. V Rambabu and VJJ Prasad, “Performance and emission analysis of Di Diesel Engine
using 100% linseed methyl ester along with methanol as fuel “ ,National Conference of
chemical engineers on Bio-fuels towards energy security and environment protection ,
Visakhapatnam on 30th Sept and 1st Oct - ,2011
4. P.Sriniva Rao and S.V.Ramana , ” An Experimental Approach To Investigate the
Lubrication of Nano-Crystalline Boric Acid “,National Conference on Emerging Trends in
Mechanical Engineering- 2K11 Aksheyaa College of Engineering, Kanchipuram Dist,
Tamilnadu on 6th August - 2011

National Journals
- Nil -

Inter National Conference

1. P.Laxminarayana ,P Govinda Rao, MVS Babu and PS Rao “ Reduction of residual stresses
in welded joints using mechanical vibrations and analysis using finite element method ”
International conference on Materials processing and characterization ICMPC 2012
,Hyderabad 8-10 march 2012,
2. P. Ramesh Babu, K. Prasada Rao and VJJ Prasad “Experimental studies on a DI Diesel
engine run with methyl ester injection and methanol carburetion “ ,International
conference on Recent Advances or challenges in Energy 2012, , Manipal, Karnataka.,4- 6 Jan
- 2012 ..
3. M Anil Kumar and P.Ramesh Babu “ Convective Heat Transfer Analysis of Gas Turbine
Blades using Finite Element Methods” Proceedings of International Conference on
Computational Methods in Manufacturing (ICMM 2011) IIT, GOWHATI, December 15,
2011
4. C.L.V.R.S.V. Prasad, S.V.Ramana, and P.N.L. Pavani, “ Prediction of Surface
Interactions At Chip Tool Interface UsingMamdani Fuzzy Inference System”
International Conference on Nanotechnology and Biosensors (ICNB-2) -2011, Raghu
Engineering College, Visakhapatnam , From 28-29, December - 2011
5. Bajani Shaik S.V.Ramana “Investigation and Development of Mathematical Correlations
of Cutting Parameters for Machining Titanium with CNC WEDM “ International
Conference on Mechatronics, Robotics and Manufacturing, ICMRM-2011 Interscience
campus P.O, Kantabada, Dist.Kurda, Odessa, From 11-12 December - 2011
6. S.V.Ramana “ Experimental Investigations with respect to material Removal Rates and
Tool Wear for Contoured Tools” International Conference on Technology and Innovation,
ICTI-2011 ,Green park, Chennai, on 26th July 2011
7. VJJ Prasad, P. Ramesh Babu and P Govinda Rao “ Bio Diesel(JME as an alternate fuel in
a Diesel Engine with the exhaust gas recirculation to reduce NOx “ ,International
Conference on Themal Energy & Environment – INCOTEE 2011 Kalasalingam University,
Krishnakoil, Virdunagar Dist, Tamilanadu, from 24th to 26th March,2011
8. P Ramesh Babu ,VJJ Prasad and V Rambabu “ Experimental Investigation on Emission
& combustion by Implementation of 100% Palm Kennel methyl Ester on VCR DI
Diesel Engine ” First India International Energy Summit- 2011,VNIT, Nagpur ,on 28th to
30th Jan. - 2011

Inter National Journals:

1. P. Ramesh Babu and K. Prasada Rao “ The role of oxygenated fuel addition alloy with
Mahuka Methyl Ester to estimate performance and emission analysis of DI- Diesel
Engine” International Journal of Thermal Technologies, Vol 2 issue 1, Pp 119 – 127 ,Mar –
2012
2. SudhirKumar.J VJJ Prasad, Venkata subbiah.K and VV Prasada Rao P “Experimental
studies on a DI-CI engine using blends of fuel with plastic diesel derived from plastic
waste at 250 bar injection pressure “ International journal of current Engineering and
Technology, Vol 1 issue.1 Pp 159-165 March - 2012
3. P. Ramesh Babu and BV Appa Rao “Combustion Heat Release Estimation of Explore
best blend of Mahua methyl ester and Diethyl Ether as cetane Improver “International
Journal of Engineering Science and Metallurgy, Vol 2 ,issue.1, Pp 385-394 Feb – 2012
4. A.K. Matta , D. Venkata Rao , P. Ramesh Babu and R.Umamaheswara Rao “ Analysis of
Gas Turbine Blades with materials N155& INCONEL 718 “ International Journal of
Advances in Science and Technology, Vol 4 , Issue 1, Pp 46-50 Jan – 2012
5. P.Ramesh babu, VJJ.Prasad , N.Hari Babu and BV Apparao “ Combustion and Performance
Analysis of DI-Diesel Engine Fuelled with Neat Mahua Methyl ester along with Oxygenated
fuel ( DEE ) as an additive “IRME , vol. -6, PP 147- 152 Jan 2012 Praise Worthy Prize
6. P.Ramesh babu, N.Hari Babu and BV Apparao “ Potential of Diethyl ester as a
supplementary Oxygenated fuel with Mahua Methyl ester to improve performance and
emission characteristics of diesel engine“ fundamental journal of Thermal sciences and
engineering, vol. -2, Issue -1, PP 1- 12 ,Jan 2012
7. G.Bhanu Kiran, KNS Suman, N.Mohan Rao and R.Umamaheswara Rao “A study on the
influence of hot press forming process parameters on mechanical properties of green
composites using Taguchi experimental design “ International Journal of Engineering
Science and Technology Vol 3 , Issue 4, Pp 253 – 263 Dec – 2011
8. R.Umamaheswara Rao S.Krishna Madhavi KNS Suman, and G.Bhanu Kiran, “
Elimination of Multi- Resonse correlation while applying Taguchi Philosophy in
optimization of process parameters for preparation of PLA and Pcl bio polymer blends
through compression molding “ International journal of Industrial Engineering technology,
Vol 3 , Pp 351-368 Nov – 2011

9. R.Umamaheswara Rao “Toughening of Polylactide by melt blending with a

biodegradable polycaprolactone “ International journal of Advanced Materials science ,
Vol . 2 , issue 2 ,Pp 241-248 Aug – 2011

10. R.Umamaheswara Rao KNS Suman, VVS Kesava Rao and G.Bhanu Kiran, “ Study of
rheological and mechanical properties of biodegradable polylactide and
polycaprolactone blends “ International Journal of Engineering Science and Technology
Vol 3 , Issue 8, Pp 253 – 263 Aug – 2011
11. R.Umamaheswara Rao KNS Suman, VVS Kesava Rao B Satayanarayana and G.Bhanu
Kiran “ Selection of optimal process parameters for preparation of PLA and PCL Bio-
Polymer blends through compression molding” Automotive Mechanical and Aerospace
Engineering Research , Vol .2, Pp, 272-281 June - 2011
12. P.Srinivasa Rao and S.V.Ramana “A metal cutting approach to investigate the
triboligical properties of nano crystalline boric acid and the effect of its carrying
medium “ International Journal on Advanced Materials Research Vol 223(2011) pp 359-368
2011

2010-11
National Conferences

1. GVSS Sharma CLVRSV Prasad and RL Naidu “Expression for Mean Fluctuation
Velocity Bearing Surfaces” Gitam, Visakhapatnam, 15th & 16th,April - 2011
2. B Aswani Kumar “Mesh Free Methods- Beyond FEM “ , Mechanical Engineering Students
Conference ( MESCON’ 10 ), AU, Visakhapatnam , Sep 23 and 24 - 2010,

National Journals ……….NIL ………

Inter National Conference

1. S V Ramana K Ramji and B.Styanarayana “A metal cutting approach to investigate the
tribological properties of nano crystalline boric acid and the effect of its carrying
medium”, 13th CIRP International Conference on Modeling of Machining Operation ,
Catholic University of Portugal, Sintra, Portugal May 12 th & 13th - 2011
2. P.Ramesh babu VJJ Prasad and V Rambabu “Experimental Investigations of Evaluating
the performance by implementing 100% PKME on a VCR D I Diesel Engine “
 International Mechanical engineering Congress and Exposition ( IIES-2011 ) , VNIT, Nagpur
, 28th to 31st Jan.2011
3. Ramu.N, Gandhi M, Mohan krishna K and Satyanarayana B “Investigation on Slurry
Abrasion Wear behaviors of weld deposited steel “,3rd International & 24th AIMTDR
Conference-2010, Department of Mechanical Engineering, AU College of Engineering (A)
Andhra University, Visakhapatnam 13th to 15th Dec. - 2010
4. S V Ramana K Ramji and B.Styanarayana “Experimental investigations on the
tribological behavior of the nano sized solid lubricant in the machining of AISI 1040
steel”, 3rd International & 24th AIMTDR Conference-2010, Department of Mechanical
Engineering, AU College of Engineering (A) Andhra University, Visakhapatnam 13 th to 15th
Dec. – 2010
5. CLVRSV Prasad, S V Ramana S.Srikiran and K Ramji “ Experimental investigations for
characterization and analysis of rake face of the WC-Co inserts using Taguchi
method”, ASME International Mechanical Engineering Congress and Exposition , during
November 12-18, 2010 ASME
6. S V Ramana K Ramji and B.Styanarayana “Performance Evaluation of Solid lubricant
and its Nano Regime when machining of AISI 1040 steel l” International Conference on
Synthesis, Characterization, Consolidation and Modeling of Nanomaterials, Department of
Metallurgical Engineering, PSG College of Technology, Coimbatore India, 5 - 6, March
2010

Inter National Journals:

1. R Umamaheswara Rao “A Study on the influence of hot press forming process

parameters on mechanical properties of green composites using Taguchi Experimental
Design “ International Journal of Engineering science and Technology Vol.3,issue 4, Pp
253- 263, June – 2011.
2. V Rambabu and VJJ Prasad T Subramanyam and B.Styanarayana,” Evaluation of
Performance, Combustion Characteristics Emission of DI-Diesel Engine Fueled with
preheated cotton seed methyl ester” International Journal of Mechanical Engineering
(IREM ) - Vol.4 ,issue 5 Pp. 502-506, July – 2010
3. J.Ganesh Kumar, M Chowdary, V.Ganesan and RK paretkar “High Temperature design
curves for high nitrogen grades of 316LN Stainless steel”, International Journal of
Nuclear Engineering & Design ELSEVIER vol. 240,Pp 363-137 – 2010
4. S V Ramana K Ramji and B.Styanarayana “Influence of nano-level variation of solid
lubricant particle size in the machining of AISI 1040 steel “International Materials
Engineering Innovation, Vol 2,Issue 1 PP : 16-22 2011 Indrescience Enterprises Ltd

2009-10
National Conferences:
1. P.S.Rao “Expert System for Welding process selection using MADM Approaches “ ,
National conferance on Advanced Materials & Processing (AMP) JNTU, Vzm Nov.2009
2. P.S.Rao and .MV S Babu “Nano Characterization by Nano indentation and its
simulation using ANSYS” , National conference in emerging trends in Mechanical
engineering,( SNIST), Hyderabad 01st and 02nd july,2009.
 National Journals: ……..NIL……..

Inter National Conference:

1. S V Ramana, K Ramji and B. Satyanarayana “Experimental Investigation on the influence

of variation of wt% of nano sized solid lubricant in the machining of AISI 1040 steel “
Indo French Workshop cum international Confer on Nano Sc. & Nano Technology, Ansal
Institute of Technology, Gurgaon from 12th to 19th October,09
2. V.Rambabu VJJ Prasad , Dr T.Subramanyam and B.Satyanarayana “ Analysis of
performance combustion and emissions on a variable compression ratio Diesel engine
fueled with cotton seed Methyl ester “International conference on advances in mechanical
engineering Aug 2009, SV national institute of technology Surat
3. VJJ Prasad, P.Srinivasa Rao and N Hari babu “ Evaluation of best compression ratio for
considering performance combustion and emission analysis on VCR- Diesel engine
fueled with Mahua Methyl Ester “International conference on advances in mechanical and
building sciences ICAMB Dec 2009, VIT , Vellore Tamilnadu

Inter National Journals:

1. SV Ramana , K Ramji, B. Sataya narayana „ Studies on the behaviour of the green

particulate fluid lubricant in its nano regime when machining AIAI 1040 steel “ Journal of
Engineering Manufacture, Vol 224 part B Pp : 1491-1499 Januray 2010
2. V.Rambabu VJJ Prasad , Dr T.Subramanyam and B.Satyanarayana “Comparison of
performance and combustion parameters and Emissions on a variable compression
ratio diesel engine fueled with CsME “International Journal of Applied Engineering.
Research , Vol.4 issue 11, Pp 2291 - 2306 Nov – 2009
3. CLV RSV Prasad and S.Srikiran “Functional Failure analysis of Pandrol Clip “ ,
International Journal of Applied Engineering. Research , Vol.4 issue 11, Pp 2329-2336 Nov -
2009
4. VJJ Prasad, N.Hari babu and BV Appa Rao “Reduction of NOx in the exhaust gas of DI-
Diesel Engine fueled with mahua methyl ester along with exhaust gas recirculation”
International Journal of Renewable and sustainable Energy (American Institute of Physics
Journal) Oct -2009
5. M V S Babu “Microprocessor based position and velocity control of pneumatic,
Actuators for low cost applications “International Journal of Applied Engineering.
Research, Vol.4 issue .8 Pp 1499-1506 Aug.2008
6. N. Hari BabuG. Ravikiran Sastry, VJJ Prasad and BV Appa Rao ““Experimental studies on
a DI-CI Engine Run with Pongamia Methyl Ester Injection and Methanol
Carburetion” International Journal of Internal Review of Mechanical Engineering., Vol.3
issue.4 Pp 489 – 493 July. 2009.

2008-09
 National Conferences:
-----------NIL--------------
National Journals:
-----------NIL--------------

Inter National Conference:

1. V J J Prasad, K Prasada Rao and P.Govinda Rao “Recent Trends in Material and
Mechanical Engg 2008”, International Conference Paper, Dr Mahalingam College of Engg,
Polachi, Chennai 18-20th December 08
2. CLVRSV Prasad, and Mr.S.Srikiran “Performance Analysis of a Pandrol Clip”,
International Seminar on “Modeling, Simulation and Manufacturing Systems”, AU College
of Engineering, Visakhapatnam, on 29-30 June 2008
3. .S V Ramana, “Newer coating materials for dry machinery – A state of art review in
Nano Technology Perspective”, International Seminar on “Modeling, Simulation and
Manufacturing Systems”, AU College of Engineering, Visakhapatnam, on 29-30 June 2008
4. S V Ramana, “Experimental investigations on the influence of variation of wt% of nano
sized solid lubricant in the macbhining of AISI 1040 steel”, International Seminar on
“Modeling, Simulation and Manufacturing Systems”, AU College of Engineering,
Visakhapatnam, on 29-30 June 2008

Inter National Journals:

------NIL---------
2007-08
National Conference:
1. R.Umamaheswara Rao, “Optimal Path Selection For pick and place application of
SCARA ROBOT by Using GA- Case Studies”, National Conference on Emerging Trends
in Mechatronics and Instrumentation ( ETMI-2007), Venkateswara University, Tirupati. On
29-30, June 2007
2. R.Umamaheswara Rao and P.Ramesh Babu, “Optimal Control Parameters Selection of
HDPE Pipe Extrusion for improving withstanding Pressure” National Conference on
Emerging Trends in Mechatronics and Instrumentation ( ETMI-2007), Venkateswara
University, Tirupati. On 29-30, June 2007

National Journals:
-----------Nil-------

Inter National Conference:

1. V J J Prasad, “Experimental Investigation to reduce the exhaust pollution of Laboratory
based DI Diesel engine with the application of Mahaua Methyl Ester and hydrogen total
replacing petro diesel fuel”. International Conference ICONICE-2007., JNTU, Hyderabad,
on 6-9th December 2007
2. V J J Prasad and V.Rambabu. “Effect Of Change In Injection Pressure On Performance
Of A Diesel Engine Fuelled By Diesel, Diesel-Bio-Diesel Blends And 100% Bio-Diesel
(Jatropha Methyl Ester)”. International Conference ICONICE-2007., JNTU, Hyderabad,
on 6-9th December 2007
3. R.Umamaheswara Rao, “Optimal Path Selection For pick and place application of
SCARA ROBOT by Using GA- Case Studies” International Conference on Advanced
design and Manufacturing ( ICADM-2007) , Sethu Institute of Technology, Pulloor,
Kariapatti – T.N, 626 106 On 9-11, August 2007

Inter National Journals:

-----------Nil----------

2006-07
National Conferences:
1. R.Umamaheswara Rao, and P.Ramesh Babu “Optimal Control Parameters Selection of
HDPE Pipe Extrusion for improving withstanding Pressure”, ETMI-2007, Venkateswara
University, Tirupati. On 29-30, June 2007
2. R.Umamaheswara Rao, “Optimal Path Selection For pick and place application of
SCARA ROBOT by Using GA- Case Studies”, ETMI-2007, Venkateswara University,
Tirupati. On 29-30, June 2007
3. P.Srinivasa Rao, and P Venkata Kumar, “Vibration isolation performance of a full car
suspension system model using delayed resonator vibration absorber” , National
conference, organized by AIMS-07, KCIT, Coimbatore on 22-24 March2007
4. P.Ramesh Babu and V J J Prasad, “Experimental Investigations On ‘Esterified Rice Bran
Oil on 4stroke Single cylinder – Kirlosker Diesel Engine”, National Conference on
Emergin Trends in Thermal Engineering Competitive Manufacturing and Management 2007,
St. Joseph’s college of Engineering, Chennai on 30 th January 2007
5. P.Srinivasa Rao and S.Srikiran, “Attribute Variables for Expert System for selection of
welding process”, National Conference on Factory Automation, Robotics And Soft
Computing ( FARSC-07 ) , NIT, Warangal, 18-19 January 2007
6. V.Rambabu, and Mr.Saurabh Gupta “Use of Ammonia for Air Conditioning Application”,
National Conference, “TIME-2006”, KITS – Warangal during 29 th -30th December 2006
7. R.Umamaheswara Rao and P.Ramesh Babu “On Investigation of Optimum M/C
parameter for tuning through Taguchi Approach”, ETME-2006, SRKREC, Bhimavaram
on 22nd & 23rd December 2006.
National Journals:
-----------Nil-----------

Inter National Conference:

1. P.Srinivasa Rao, “Advances in Machine Design and Industry Automation”,
International Conference, ICAMDIA’07, 10-12th January,2007
2. V J J Prasad and Mr.P.Ramesh Babu “C F D Analysis over the Eductor Diffuser System
for the I R Suppression”, International Conference E D A F Symposium, Bangalore,
International Conference E D A F Symposium at Banglore on 11 th – 12th January 2007
3. B.Murali Krishna,”The use of CSO in Direct Injection Diesel Engine as an Alterntive
Fuel”, ICBFV2015, Engineering College Bikaner, Rajasthan, 13 th-15th October 2006.
4. B.Murali Krishna, ”Renewable Biodiesel from CSO- a Fuel Option for Diesel Engines”,
ISEC2006, Denver USA , 8-13th July 2006
 Inter National Journals:
Nil
2005-06
National Conferences:

1. Saurabh Gupta, “Under Floor Air Conditioning”, National Conference on State of the art
in Technologies in Mechanical Engineering ( NCSAME 06,) JNTU College of Engg.,
Hyderabad, 5th & 6th May 2006
2. B.Murali Krishna, “Determination of Properties of Prospective Bio-diesel Fuel for Diesel
Engines”. National Conference on State of the art in Technologies in Mechanical
Engineering ( NCSAME 06,) JNTU College of Engg., Hyderabad, 5 th & 6th May 2006
3. P.Srinivasa Rao, “Experimental Design through Taguchi Technique to improve the
quality of Ring Casting”, National Conference on Applications of Advanced quality
methods in Engineering & Technology, (AAQMT – 2006), Erode Sengunthar Engineering
College – Erode – Tamilnadu, 23rd -24th February 2006
4. M.Srinivasa Rao, “ Software oriented Inventory control approach for Welding
electrodes “National Conference “ NCRTM, KITS college of engineering, Kolhapur, (M.S),
7th , 8th , January , 2006.
5. B.Murali Krishna, “CATCON-An immediate solution to reduce exhaust emissions of I.C
Engines”, National conference on Advances in Mechanical Engineering (AIME-2006),
Jamia Milla Islamia, New Delhi, Jan 20th-21st 2006
6. P.Srinivasa Rao, and N.V.S.Shankar,” “A feature Based Approach for Automatic Process
Planning”, National conference on Computer Applications in Mechanical Engineering,
CAME 2005, JNTU, Ananthapur, 21st December 2005
7. B.Murali Krishna, Effect of Nozzle hole shape on the performance of single cylinder
Direct Injection Diesel Engine, National Conference on Computer Applications in
Mechanical Engineering (CAME-2005), JNTU College of Engineering, Anantapur , 21 st
December 2005

8. B.Murali Krishna, “Energy conservation in boiler application through efficient

utilization of steam”, National conference on emerging technologies and Applications
(ETA-2005), Computer Science Department of Saurashtra University, Rajkoti and
Amoghsidhi education society, Sangli, 1st -2nd October 2005.
9. Saurabh Gupta, “Energy Conservation in Fired Equipments”, National conference on
emerging technologies and Applications (ETA-2005), Computer Science Department of
Saurashtra University, Rajkoti and Amoghsidhi education society, Sangli, 1st -2nd October
2005.
10. Saurabh Gupta, “Introduction to ERA for Simulation of refrigerators”, National
Conference, Academic Staff College, Rajkot, 1st and 2nd October 2005
11. M.Srinivasa Rao, “A Computer Aided Approach for Achieving Total Quality Control”,
National Conference on “CS department of saurashtra University, Rajkot – 360 005, Jointly
with Amoghsiddhi Education society, Sangli on 1 st and 2nd , oct-2005.
12. B.Murali Krishna, “An analytical approach to solve tensional vibration problem of multi
cylinder I.C engines”, National Conference on Computational Methods in Mechanical
Engineering (COMPUTIME), Osmania University, Hyderabad,16 th-17th September 2005.
13. M.Srinivasa Rao, “SQC Based Expert System for a Process Industry”, National
Conference on “ National Conference on Computational methods in Mechanical Engineering
(COMPUTIME ) , Osmania University, Hyderabad, 15 th Sept. 2005
14. N.V.S.Shankar, “Obstacle avoidance using stereo vision system”, National seminar on
Advances in Image Processing and Robotics, MIT, Chennai, Jan 2005

National Journals:
---------Nil----------
Inter National Conference:
1. M.Srinivasa Rao, “ Statistical quality control based expert system for a Jute processing
industry”, International conference, “INCREASE 2005, IIT, Kharagpur , extension centre,
Bhubanaswar , 21st to 23rd , December, 2005
2. B.Murali Krishna, “Performance evaluation of single cylinder diesel engine using
Biodiesel” 14th ISME International conference on ME in Knowledge Age, Delhi college of
Engineering, Delhi 12th to 14th Dec. 2005
3. B.Murali Krishna, “Biodiesel form CSO” International Conference on Environment, JNTU,
Hyderabad, 27th to 30th oct, 2005

Inter National Journals:

-------------Nil---------------