g Nuovo Pignone                                                                                                                         No.
STD-MT-160
                                                                PRE COMMISSIONING                                                        Page          1 of 1
               FIRENZE                                                FORM                                                               Date:
                                                                  CHECKS ON THE
                                                         OIL VAPOURS SEPARATION SYSTEM
           System Item:.......................................................................................................................................
           Service:          Oil vapours separation system
                                                                   INSTRUMENTS FOR TEST
           - No special instruments are necessary
   POS.                                          ACTIVITY                                             CHECK.              DATE                          NOTE
     3.0        Checks
      1         Power supply and aux. switches open or extracted
      2         Filtering cartridge installed
      3         Data plates
      4         Preservation state
      5         Verification as per schematic
     4.0        Final setup
                Control and signaling cables conected to the
                temporary terminal boards and verified
                Power supply cables connected and verified
                Electrical motor verified
                Power and aux.switches extracted or open
                Ground connections tested and tightened
                Foundation bolts or anchor bolts tightened
 Contractor:                                                Nuovo Pignone:                                              Final Client:
 .......................................................... .......................................................... ..........................................................
STD-MT-160                                                                                                                                              Page 1 of 1