SPECIFICATIONS

Net Power Standard Bucket Operating Weight

152 HP (113 kW) .73 m3 / .95 yd3 40,570 lbs (18,400 kg)
/ 2,200 rpm

OPERATING WEIGHT (APPROXIMATE)

Operating weight, including 5.1 m (16' 9") boom, 2.6 m (8' 6") arm, SAE heaped
ENGINE 0.73 m3(0.95 yd3) bucket, lubricant, coolant, full fuel tank, full hydraulic tank,
Maker / Model Cummins B4.5 and all standard equipments.
Tier 4F/ Stage V Emission Certified, OPERATING WEIGHT
Type 4 cylinder diesel engine with no manual
Ground
regeneration. Shoes Operating Weight
Pressure
Rated
J1995 (gross) 115 kW (155 HP) at 2,200 rpm Width kgf / cm2
flywheel Type kg (lb)
SAE mm (in) (psi)
horse
J1349 (net) 113 kW (152 HP) at 2,200 rpm
power 500 HX180A L 18,140 (39,990) 0.50 (7.13)
Max. torque 115 kW (155 hp) at 2,000 rpm (20") HX180A L Dozer 19,235 (42,410) 0.53 (7.56)
Peak torque 712 N·m (525 lb·ft) at 1,200 rpm
Displacement 4.5 ℓ(275 cu in) 600 HX180A L 18,400 (40,570) 0.42 (6.03)
Triple (24") HX180A L Dozer 19,505 (43,000) 0.45 (6.39)
HYDRAULIC SYSTEM grouser
700 HX180A L 18,665 (41,150) 0.37 (5.24)
MAIN PUMP
(28") HX180A L Dozer 19,780 (43,610) 0.39 (5.55)
Type Variable displacement tandem axis piston pumps
Max. flow 2 × 160 lpm (42.3 U.S. gpm) 800 HX180A L 18,920 (41,710) 0.33 (4.65)
AUXILIARY PRESSURE (32")
HX180A L Dozer 19,985 (44,060) 0.35 (4.91)
Flow (I/min) 13~85 gpm / (50~320 lpm)
2 Way
Pressure (bar) 1,450~5,076 psi / (100~350 bar) SWING SYSTEM
Flow (I/min) 11 gpm / (39.9 lpm)
Rotating Swing motor Fixed displacement axial piston motor
Pressure (bar) 2,321 psi / (160 bar)
Swing reduction 2 - stage planetary
PILOT PUMP
Swing bearing lubrication Grease-bathed
Type Fixed displacement gear pump single stage
Max. flow 29 ℓ/min (7.7 U.S. gpm) Swing brake Multi wet disc
Swing speed 10.3 rpm
HYDRAULIC MOTORS
Travel Variable displacement axial piston motor COOLANT & LUBRICANT CAPACITY
Swing Fixed displacement axial piston motor
US gal liter
RELIEF VALVE SETTING
2
Fuel tank 76.6 290
Implement circuits 350 kgf/cm (4,980 psi)
Travel 350 kgf/cm2 (4,980 psi) Engine coolant 6.1 23
Power boost Engine oil 2.9 11
380 kgf/cm2 (5,410 psi)
( Boom, Arm, Bucket ) Swing device 1.6 6.2
Swing circuit 285 kgf/cm2 (4,060 psi) Final drive (Each) 1.6 6
Pilot circuit 40 kgf/cm2 (569 psi) Hydraulic system
Service valve Installed 59.4 225
(Including tank)
HYDRAULIC CYLINDERS Hydraulic tank 33.0 125
Boom : 2-Ø115 × 1,090 mm
No. of Cylinder Arm :1-Ø120 × 1,355 mm Def/Adblue® 9.2 35
Bore X Stroke Bucket : 1-Ø110 × 995 mm
Blade : 2-Ø110 × 320 mm UNDERCARRIAGE
* Hyundai Bio Hydraulic Oil (HBHO) available. The X-leg type center frame is integrally welded with reinforced box-section
track frames. The undercarriage includes lubricated rollers, idlers, track
DRIVES & BRAKES adjusters with shock absorbing springs and sprockets, and a track chain with
Drive method Fully hydrostatic type double or triple grouser shoes.

Drive motor Axial piston motor, in-shoe design Center frame X-Leg Type

Reduction system Planetary reduction gear Track frame Pentagonal Box Type

Max. Drawbar pull 16,700 kgf (36,820 lbf) No. of Shoes on each side 49

Max. Travel speed No. of Carrier roller 2x2

3.1 km/hr (1.9 mph) / 5.4 km/hr (3.4 mph)
(High / Low) No. of Track roller 2x7
Gradeability 35°(70%) No. of Rail guard 2x1
Parking brake Multi wet disc
CAB NOISE LEVEL
CONTROL Guaranteed noise level presented below can be differed depending on a range
Pilot pressure operated joysticks and pedals with detachable lever provide of factors such as operating condition, speed of a cooling fan, types of engine
almost effortless and fatigueless operation. and so forth. Hearing protection may be necessary if an operator is working in
the improperly aintained cabin or exposed to a noisy environment by leaving
Two joysticks with one safety lever doors and/or windows open. With cooling fan speed at maximum value:
Pilot Control (LH) : Swing and arm,
(RH) : Boom and bucket Operator sound pressure level (ISO 6396:2008) 71 dB(A)
Exterior sound power level (ISO 6395:2008) 99 dB(A)
Traveling and Steering Two levers with pedals
* Distance of 15 m (49.2 ft), moving forward in second gear ratio
Engine throttle Electric, dial type
 D(D')
E

K I
F
Powered By Cummins Performance Series Engines
C
P N G
O
A H
B L
HX180A DIMENSIONS Unit: ft·in (mm)
J M

5.10 m (16' 9") BOOM and 2.20 m (7' 3"), 2.60 m (8' 6"), 3.10 m (10' 2") ARM

Boom Length 5,100 (16' 9")

A Tumbler Distance 11' 0" (3,360)
2,200 2,600 3,100
B Overall Length of Crawler 13' 5" (4,100) Arm Length
(7' 3") (8' 6") (10' 2")
*C Ground Clearance of Counter Weight 3' 6" (1,060) 8,660 8,650 8,670
J Overall Length
(28' 5") (28' 5") (28' 5")
D Tail Swing Radius 8' 2" (2,490) 3,040 3,030 3,195
*K Overall Height of Boom
(10' 0") (9' 11") (10' 6")
D' Rear-End Length 8' 2" (2,490)
L Track Shoe 500 (20") 600 (24") 700 (28") 800 (32")
E Overall Width of Upper Structure 8' 1" (2,475)
2,490 2,590 2,690
*F Overall Height of Cab 9' 9" (2,980) M Overall Width -
(8' 2") (8' 6") (8' 10")
*G Min. Ground Clearance 1' 6" (460) **N Ground clearance of blade up 615 (2' 0")
H Track gauge 7' 5" (2,250)
**O Depth of blade down 670 (2' 2")
*I Overall Height of Guardrail 10' 8" (3,250)
**P Height of blade 640 (2' 1")
* This figure includes the size of grousers.
**With dozer blade option A

A'
HX180A WORKING RANGE Unit: ft·in (mm)
F

Boom Length 5,100 (16' 9")

Arm Length 2,200 (7' 3") 2,600 (8' 6") 3,100 (10' 2")

A Max. Digging Reach 8,690 (28' 6") 9,020 (29' 7") 9,450 (31' 0")
D
A' Max. Digging Reach on Ground 8,530 (28' 0") 8,860 (29' 1") 9,300 (30' 6")
E

B Max. Digging Depth 5,630 (18' 6") 6,030 (19' 9") 6,530 (21' 5")

B' Max. Digging Depth (8' Level) 5,410 (17' 9") 5,825 (19' 1") 6,340 (20' 10")

C Max. Vertical Wall Digging Depth * 3,410 (11' 2") 3,600 (11' 10") 3,845 (12' 7")

D Max. Digging Height 8,670 (28' 5") 8,750 (28' 8") 8,880 (29' 2") C
B B'

E Max. Dumping Height 6,140 (20' 2") 6,250 (20' 6") 6,410 (21' 0")

F Min. Swing Radius 3,180 (10' 5") 3,170 (10' 5") 3,160 (10' 4")
8ft

HX180A DIGGING FORCE

Length mm (ft.in) 5,100 (16' 9") Mono Boom
Boom
Weight kg (lb) 1,277 (2,810)
Remark
Length mm (ft.in) 2,200 (7' 3") 2,600 (8' 6") 3,100 (10' 2")
Arm
Weight kg (lb) 807 (1,780) 860 (1,900) 888 (1,960)
kN 108.0 [117.0] 108.0 [117.0] 108.0 [117.0]
SAE kgf 10,987 [11,930] 10,004 [11,950] 11,006 [11,950]
lbf 24,222 [26,301] 24,259 [26,345] 24,264 [26,345]
Bucket Digging Force
kN 126.0 [137.0] 126.0 [137.0] 126.0 [137.0]
ISO kgf 12,872 [13,980] 12,892 [14,000] 12,894 [14,000]
lbf 28,379 [30,821] 28,421 [30,865] 28,427 [30,865] []:
Power
kN 87.0 [95.0] 77.0 [84.0] 69.0 [75.0] Boost
SAE kgf 8,889 [9,650] 7,879 [8,550] 7,035 [7,640]
lbf 19,596 [21,275] 17,370 [18,850] 15,510 [16,843]
Arm Crowd Force
kN 92.0 [99.0] 81.0 [88.0] 72.0 [78.0]
ISO kgf 9,339 [10,140] 8,237 [8,940] 7,314 [7,940]
lbf 20,590 [22,355] 18,158 [19,709] 16,124 [17,505]
Note : Boom weight includes arm cylinder, piping, and pin
Arm weight includes bucket cylinder, linkage, and pin
Powered By Cummins Performance Series Engines

Lifting Capacity (Without Dozer)

Boom: 5.1 m (16’ 9”) Capacities based on North American Standard Configuration
Arm: 2.60 m (8’ 6”) in accordance with ISO condition 2 standard.
Shoe 600 mm (24”) triple grouser Rating over front
CWT 3,250 kg (7,170 lb) Rating over side or 360 degrees
Lift-point radius (B) At max. reach

Lift-point 1.5 m (4.9 ft) 3.0 m (9.8 ft) 4.5 m (14.8 ft) 6.0 m (19.7 ft) 7.5 m (24.6 ft) Capacity Reach
height (A)
m (ft)

7.5 m kg *3410 *3410 4.85

(24.6 ft) lb *7520 *7520 (15.9)
6.0 m kg *3840 *3840 *2970 *2970 6.27
(19.7 ft) lb *8470 *8470 *6550 *6550 (20.6)
4.5 m kg *4870 *4870 *4430 4100 *2850 *2850 7.10
(14.8 ft) lb *10740 *10740 *9770 9040 *6280 *6280 (23.3)
3.0 m kg *9370 *9370 *6120 6120 *4940 3960 *3110 2820 *2880 2790 7.54
(9.8 ft) lb *20660 *20660 *13490 13380 *10890 8730 *6860 6220 *6350 6150 (24.7)
1.5 m kg *7380 5720 *4880 3420 *4040 2760 *3060 2680 7.66
(4.9 ft) lb *16270 12610 *10760 7540 *8910 6080 *6750 5910 (25.6)
0.0 m kg *5920 *5920 *8070 5500 5640 3690 *3420 2730 7.47
(0.0 ft) lb *11660 *11660 *17790 12130 12430 8140 *7540 6020 (24.5)
-1.5 m kg *5090 *5090 *9190 *9190 *8010 5430 5590 3640 *4130 3000 6.95
(-4.9 ft) lb *11220 *11220 *20260 *20260 *17660 11970 12320 8020 *9110 6610 (22.8)
-3.0 m kg *9360 *9360 *10170 *10170 *6880 5490 *4910 3710 *4890 3700 6.01
(-9.8 ft) lb *20640 *20640 *22420 *22420 *15170 12100 *10820 8180 *10780 8160 (19.7)
-4.5 m kg *6860 *6860 *4560 *4560 4.39
(-14.8 ft) lb *15120 *15120 *10050 *10050 (14.4)

Lifting Capacity (Dozer Down)

Boom: 5.1 m (16’ 9”) Capacities based on North American Standard Configuration
Arm: 2.60 m (8’ 6”) in accordance with ISO condition 2 standard.
Shoe 600 mm (24”) triple grouser Rating over front
CWT 3,250 kg (7,170 lb) Rating over side or 360 degrees
Lift-point radius (B) At max. reach

Lift-point 1.5 m (4.9 ft) 3.0 m (9.8 ft) 4.5 m (14.8 ft) 6.0 m (19.7 ft) 7.5 m (24.6 ft) Capacity Reach
height (A)
m (ft)

7.5 m kg *3410 *3410 4.85

(24.6 ft) lb *7520 *7520 (15.9)
6.0 m kg *3840 *3840 *2970 *2970 6.27
(19.7 ft) lb *8470 *8470 *6550 *6550 (20.6)
4.5 m kg *4870 *4870 *4430 4310 *2850 *2850 7.10
(14.8 ft) lb *10740 *10740 *9770 9500 *6280 *6280 (23.3)
3.0 m kg *9370 *9370 *6120 6120 *4940 4170 *3110 2980 *2880 *2880 7.54
(9.8 ft) lb *20660 *20660 *13490 13380 *10890 9190 *6860 6570 *6350 *6350 (24.7)
1.5 m kg *7380 6020 *4880 4010 *4040 2920 *3060 2380 7.66
(4.9 ft) lb *16270 13270 *10760 8840 *8910 6440 *6750 6240 (25.1)
0.0 m kg *5920 *5920 *8070 5800 5640 3900 *3420 2890 7.47
(0.0 ft) lb *11660 *11660 *17790 12790 12430 8600 *7540 6370 (24.5)
-1.5 m kg *5090 *5090 *9190 *9190 *8010 5740 5590 3850 *4130 3180 6.95
(-4.9 ft) lb *11220 *11220 *20260 *20260 *17660 12650 12320 8490 *9110 7010 (22.8)
-3.0 m kg *9360 *9360 *10170 *10170 *6880 5790 *4910 3920 *4890 3900 6.01
(-9.8 ft) lb *20640 *20640 *22420 *22420 *15170 12760 *10820 8640 *10780 8600 (19.7)
-4.5 m kg *6860 *6860 *4560 *4560 4.39
(-14.8 ft) lb *15120 *15120 *10050 *10050 (14.4)
NOTES:
1. Lifting capacities are based on ISO 10567. 3. The Lift-point is the bucket pivot mounting pin on the arm (without bucket mass).
2. Lifting capacity of the HX Series does not exceed 75% of tipping load with 4. (*) indicates load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.
ENGINE STD OPT SAFETY STD OPT
Cummins B4.5 Lifting Mode ●●

Engine Auto Idle ●● Auto Safety Lock ●●

Engine Auto Shutdown Control ●● Seatbelt Warning Alarm ●●
Emergency Engine Stop Switch ●●
Battery Master Switch ● ●
HYDRAULIC SYSTEM
Rear View Camera ●●
INTELLIGENT POWER CONTROL (IPC) UPGRADE
AAVM (Advanced Around View Monitoring) ●●
3-Power Mode, 2-Work Mode, User Mode ●●
Four Front Working Lights
Variable Power Control ●● ●
(2 Boom Mounted, 2 Front Frame Mounted)
Pump Flow Control ●●
Travel Alarm ●
Attachment Mode Flow Control ● ●
Hyundai Bio Hydraulic oil (HBHO) ●● Rear Work Lamp ●●
CAB & INTERIOR STD OPT Beacon Lamp ●●
ISO STANDARD CABIN Automatic Swing Brake ●●

Rise-Up Type Windshield Wiper ●● Boom Holding System ● ●

Radio / USB Player ●● Arm Holding System ●●
Handsfree Mobile Phone System with USB ●●
Safety Lock Valve For Boom Cylinder With Overload Warning Device ●●
12V Power Outlet (24V DC to 12V DC converter) ● ●
Electric Horn ●● Safety Lock Valve For Arm Cylinder ●●
All-Weather Steel Cab with 360° Visibility ●● Swing Lock System ●●
Safety glass - Tempered glass ●● Three Outside Rearview Mirror ●
Safety glass - Tempered glass with front laminated glass ●
ATTACHMENT STD OPT
Sliding Fold-In Front Window ●●
Booms
Sliding Side Window (LH) ● ●
5.10 m, 16' 9" Mono ●
Lockable Door ●●
Hot & Cool Box ●● 5.10 m, 16' 9" 2-Piece ●●
Storage Compartment ●● Arms
Transparent Cabin Roof-Cover ●● 2.2 m, 7' 3" ●
Sun Visor ●●
2.6 m, 8' 6" ●
Door And Cab Locks, One Key ● ●
3.1 m, 10' 2" ●
Pilot-Operated Slidable Joystick ●●
Adjustable L & R Consoles ●● OTHER STD OPT
AUTOMATIC CLIMATE CONTROL Fuel Pre-Filter ●●

Air Conditioner & Heater ● ● Fuel Warmer ●●

Defroster ●● Pre-Cleaner ● ●
Starting Aid (Air Grid Heater) for Cold Weather ●● Self-Diagnostics System ●●
CENTRALIZED MONITORING Hi MATE (Remote Management System) ●●
8" LCD Display ●● ●
Batteries (2 × 12 V × 100 AH)
Engine Speed or Trip Meter / Accel. ●●
Fuel Filler Pump (35 lpm) ●●
Engine Coolant Temperature Gauge ●●
Max Power ● ● 2-Way auxiliary w Proportional control ●
Low Speed / High Speed ●● Rotating Piping Kit ●●
Auto Idle ●● Air Compressor ●●
Overload warning with alarm ●●
Quick Coupler Piping ●
Check Engine ●●
Air Cleaner Clogging ●● Quick Coupler ●
Indicators ●● One Pedal Straight Travel System ●
ECO Gauges ● ● Accumulator For Lowering Work Equipment ●●
Fuel Level Gauge ●●
Pattern Change Valve (2 Patterns) ●●
Hyd. Oil Temperature Gauge ●●
Warnings ●● Fine (Cushion/Free) Swing Control ●
Communication Error ● ● Tool Kit ●
Low Battery ●● UNDERCARRIAGE STD OPT
Clock ●●
Lower Frame Under Cover ●
Cabin Lights ●●
Track Shoes
Cabin Front Window Rain Guard ●
Triple Grousers Shoes (500 mm, 20") ●●
Cabin Roof-Steel Cover ●
Triple Grousers Shoes (600 mm, 24") ●
SEAT
Triple Grousers Shoe (700 mm, 28" ) ●●
Adjustable Air Suspension Seat With Heater ●
Track Guard ●
CABIN FOG (ISO 10262) LEVEL 2
FOG (Falling Object Protective Structure)·ISO 10262 Level 2 ● * Standard and optional equipment may vary. Contact your Hyundai dealer for more information.
CABIN ROPS The machine may vary according to international standards.
ROPS (Roll Over Protective Structures)·ISO 12117-2 ● * The photos may include attachments and optional equipment that are not available in your area.
* Materials and specifications are subject to change without advance notice.
* All imperial measurements rounded off to the nearest pound or inch.

6100 Atlantic Blvd., Norcross, GA 30071

TEL (678) 823-7777 FAX (678) 823-7778 Printed in U.S.A. HX180A L 8/2023 PS v1