Programmable Relay I/O Card for Tripp Lite Highlights
SVTX, SVX, S3MX and SV UPS Systems ●
Allows UPS to provide contact
closure output communications
MODEL NUMBER: RELAYCARDSV ●
6 output relays configurable to
Normally Close or Normally
Open
●
Input signal performs remote
UPS shutdown or battery test
●
For Tripp Lite SVTX, SVX,
S3MX and SV 3-phase UPS
systems only
System Requirements
●
Tripp Lite SmartOnline SVTX
400V non-modular, SVX 400V
modular, S3MX 400V non-
Provides contact closures for remote monitoring of Tripp Lite SVTX, SVX, S3MX and SV Series UPS modular or SV 208V modular
systems. Recommended for IBM server, PC and workstation equipment, auto-controlled industrial
equipment and communication applications. UPS system
Description Package Includes
The RELAYCARDSV Programmable Relay I/O Card is a contact-closure management accessory card
compatible only with Tripp Lite SVTX, SVX, S3MX and SV Series 3-phase UPS systems. It is ideal for
●
RELAYCARDSV Programmable
providing contact closure output communications for IBM server, PC and workstation equipment and auto- Relay I/O Card
controlled industrial equipment and communications applications. It lets you communicate UPS system
status and events via six contact closure outputs. Each output relay can be configured as either Normally ●
DB9 communication cable, 6 ft.
Close or Normally Open. You can also configure the input signal to perform remote UPS system
shutdowns or battery tests. Relay contacts report UPS alarm, utility failure, UPS on-line mode, low battery,
●
Owner’s manual
bypass mode and UPS failure. The RELAYCARDSV is simple to install in Tripp Lite SmartOnline® SVTX
400V non-modular, SVX 400V modular, S3MX 400V non-modular or SV 208V modular UPS system. A
six-foot DB9 cable is included for connecting the UPS system to equipment for remote monitoring and
control.
Features
Provides Contact Closures for Remote UPS System MonitoringRecommended for IBM server, PC
and workstation equipment and auto-controlled industrial equipment and communications applications6
output relays configurable to Normally Close or Normally OpenInput signal performs remote UPS
shutdown or battery testRelay contacts report UPS alarm, utility failure, UPS on-line mode, low battery,
bypass mode and UPS failureCompatible with Tripp Lite SmartOnline SVTX 400V non-modular, SVX
400V modular, S3MX 400V non-modular and SV 208V modular UPS systems6 ft. DB9 cable included
Specifications
OVERVIEW
UPC Code 037332199775
OUTPUT
1/2
Output Connector Type DB9 port
PHYSICAL
Shipping Dimensions (hwd / cm) 4.80 x 16.61 x 12.42
Shipping Dimensions (hwd / in.) 1.89 x 6.54 x 4.89
Shipping Weight (kg) 0.20
Shipping Weight (lbs.) 0.44
Unit Dimensions (hwd / cm) 3.3 x 6.71 x 12.9
Unit Dimensions (hwd / in.) 5.08 x 1.3 x 2.64
Unit Weight (kg) 0.08
Unit Weight (lbs.) 0.18
COMMUNICATIONS
Communications Interface Contact closure
WARRANTY
Product Warranty Period
(Worldwide) 2-year limited warranty
© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them
does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2/2
