Cookie *The pattern includes only custom hood parts
for Cookie Blouson and this instruction is only
Zipper Blouson for about attaching the hood.
*You can purchase main blouson pattern here
customize parts for >> www.wafflepatterns.com
Hoodie version *There are blog articles about a casual
way to attach lining for this blouson.
check here >> blog.wafflepatterns.com
RECOMMENDED SIZE CHART * Inch notations are approximate.
FABRICS <BODY MEASUREMENTS>
Light - medium weight jacket fabrics. size 34 36 38 40 42 44 46 48
Knit fabrics for cuffand hem. 80 84 88 92 96 100 104 110 cm
bust
31.5 33 34.6 36 37.8 39.4 41 43.3 in
MATERIALS waist
62 66 70 74 78 82 86 92 cm
• Main Fabric /140 cm (55“) width 24.4 26 27.5 29 30.7 32.3 34 36.2 in
2 m (2.2 yds) for size 34-40
2.3 m (2.5 yds) for size 42-48 86 90 94 98 102 106 110 116 cm
hip
33.8 35.4 37 38.5 40.1 41.7 43.5 45.6 in
• Knit Fabric /140 cm (55“) width
Length : 0.5 m (0.5 yds)
<FINISHED GARMENT>
• Pocket pouch Fabric
100 cm (39“) width size 34 36 38 40 42 44 46 48
Length : 0.5 m (0.32 yds) 95 99 103 107 110 115 119 125 cm
bust
• Interfacing 37.4 38.9 40.5 42.1 43.3 45.2 46.8 49.2 in
• Separating Zipper : 1 58 58.5 59 59,5 60 60,5 61 61.5 cm
length 52- 53- 54- 54.5- 55.5- 56- length
57 -58cm( 20.4- 20.8- 21.2-
22.8 23 23,2 23.4 23.6 23,8 24 24,2 in
21.4- 21.8- 22- 22.4- 22.8 inch ) sleeve 66 66.2 66.4 66.7 67 67.5 68 68.5 cm
length 25.9 26 26.1 26.2 26.3 26.5 26.7 26.9
• Zipper 12 cm (4.7 inch) : 2 in
* The finished bust measurements are approximate incl gather.
*The finished length shows from nape to hem.
hoodie version < Cookie > Zipper Blouson JK_2009
PATTERN PREPARATION
• Print out the pattern pages. The data size is 100%. Print it without scaling.
Check the test square (10 X 10 cm (≈ 4”)) in the pattern page to insure that your pattern has printed correctly.
• The pattern has layers. It can be printed or shown only the size(s) you need. For better visibility, show only the layers
you need. Please refer the file about layered pdf included in download files.
• Cut off the margins around each page.
• Place them along the numbers as shown in the diagram on the pattern data. Tape the pieces together.
• Adjust the pattern if necessary to fit your measurements.
• Cut out your pattern.
* This pattern includes seam allowances, also shows seamlines and hemlines.
You can choose your pattern outline, as your sewing way.
LAYOUT / CUTOUT / MARKING / PUT INTERFACING
No need the Collar part for hoodie version. Seam allowance : 1.2cm ( ≈1/2”)
exception of indicated on the fig
• Preshrink your fabrics, if it is needed. width : 140cm // 55“ Interfacing
• Place the pattern pieces on your fabric Back
• Choose the grainline direction as your design
Front
referring this diagram. Make sure to be
fold
Yoke Yoke • 1cm ( ≈3/8” ) widthinterfacing tape on
followed the grainline on the pattern.
cut 1 cut 2
zipper places
1.5cm
(≈5/8”)
Pocket
Pouch
Back
• Cut your fabrics. cut 2
• Interfacingon pocket places
* If your fabrics have some print or Front
pattern, such as the plaid, make sure Back cut 2
fold
cut 1
• Interfacing on
to match it on the different pieces. 1.5cm(≈5/8”)
pocket open places
• Mark all pattern markings onto the
wrong side of your fabric. (notches, Front fold
Under
center, pocket placement etc.) Pocket
fold
cut 2
Pouch
Front
Back
• Press the interfacing, according to
cut 2
Facing
this diagram onto the wrong side
cut 1
Pocket Pouch fabric
of the fabric. Sleeve
width : 100cm // 39“
cut 2
1.5cm(≈5/8”)
Center
Hood
Tips for INTERFACING
Outside
Inside
cut 2
*referenceplacements for
size 42-48
• If your fabrics are easy to shrink from
Back
iron heat.... Yoke Pocket
Front
Yoke
Pouch
Front
1 Pre-cut your fabric larger size. Facing
cut 2
Back Front
Pattern Side
Side
2 press interfacing. Hood Hood
(Inside) (Outside)
cut 2
fabric cut 2 Back Front
Facing
Facing
Sleeve
interfacing
3 Cut actual size
width : 140cm // 55“
Hem band Center
Pattern
fold
cut 1 Side Hood
Hood
Front
Under
* recommendable for the Facing parts.
Knit fabric Side
Cuff
Hood
• Choose the suitable interfacing for your fabrics.
cut 2
Stretch direction
Check it by making test pieces if you are not sure.
<Cookie> Zipper Blousonhoodie version JK_2009
LEGEND
Right side fabric Wrong side fabric Interfacing
* The seam/hemline markings are shown for explanation.
FINISH EDGES
HEM BAND
YOKE
1 Finish these steps following the instruction of the main pattern.
HOOD 1 Place the Center and the Side Hood (L/R) pieces,
right sides together. Sew the seam lines.
4 Finish the Inside Hood the same as this.
Hood center
(outside)
Wrong side
*If your fabric is thick or stiff, make the Inside
Hood smaller than the Outside Hood for better
2 Clip into the curve. fitting. Check the fitting by placing them
together and adjust the size by adding saem
*Use the pattern allowance width on inside hood.
notches as a guide Hood side
(outside)
Right side
Hood side
(outside)
Wrong side
3 Press the seam open.
1
FACING Place the Front and Back
Facing piecesright sides together.
Sew the shoulder seam.
Press the seam open.
Back Finish the other side in the same way.
Front
Facing
Facing
Right side
Wrong side
ZIPPER POCKET ATTACH YOKE // BODICE SIDE SEAM
PREPARE GATHER CUFF *If you put the lining, attach cuffs after the front zipper.
ARMHOLE ATTACH HEM
1 Finish these steps following the instruction of the main pattern.
<Cookie> Zipper Blousonhoodie version JK_2009
ATTACH FACING / HOOD
1 Put the outside Hood neckline and the Bodice neckline
together right sides facing and stitch. 4 Press the seam open.
3 Clip into the curve.
Hood Hood
outside outside
Right side Right side
Yoke Yoke
Wrong side Wrong side
Bodice Bodice
Wrong side Wrong side
2 Trim the all edges of seams.
5 Attach the inside Hood to the Facing
as the same way.
Facing
Wrong side
Hood
inside
Right side
FRONT ZIPPER 3 Separate the zipper.
Put it onto the bodice and baste.
1 Check the zipper length, adjust it if necessary.
Hood
Right
side
Yoke
Right side
0.7cm( ≈1/4”)
Front
2 Put marks
Right side
as a guide.
Front
Wrong side
Facing
Right side
Zipper
Wrong side
<Cookie> Zipper Blousonhoodie version JK_2009
4 Place the Facing with the Hood onto the Front Bodice 5 Turn it right side and press the edges.
right sides together. Sew the front seam,
6 Baste the front line.
hem and edge of the hood.
Hood Inside
Wrong side
Hood Outside
Right side
Facing Front
Wrong side
Front Wrong side
Right side
Zipper Facing
Wrong side Right side
Sew until the end of the Facing.
TOPSTITCH
2 Topstitch around the edge
of the hood.
1 Stitch in ditch on the shoulder seams
to fix the facing to the bodice 3 Topstitch around the
neck line.
4
Topstitch the front edge.
6 Topstitch around the Cuff.
5 Topstitch on the hem line. FINISH !
www.wafflepatterns.com
All designs, illustration, and images are protected by federal copyright.
Designs are not to be created for commercial sale.
Personal use only.
Copyright © 2015 Waffle Patterns / Yuki design All rights reserved.
<Cookie> Zipper Blousonhoodie version JK_2009
