CSU, East Bay
FORKLIFT
PRE-SHIFT INSPECTION CHECKLIST
Forklift Operator - Perform pre-shift inspection at the Start of Every Shift/Task.
Note general vehicle condition. Clear away all collected debris. Check for mechanical
damage and loose or leaking components.
Before starting engine check the following:
Visual Inspection Status Remarks
Service
OK Needed
Walk around inspection (warning decals, capacity plate, etc.) ____ ____ ________________________
Forks/locking pins, Carriage, Mast ____ ____ ________________________
Wheels, Tires & Lug Nuts (condition/pressure) ____ ____ ________________________
Engine (check oil level and for leaks) ____ ____ add ________________________
Transmission (check oil level and for leaks) ____ ____ add ________________________
Engine Belts (check for adjustment/wear) ____ ____ ________________________
Air cleaner ____ ____ ________________________
Radiator (check coolant level) ____ ____ add ________________________
Hydraulic Tank (check oil level & for leaks) ____ ____ add ________________________
Fuel Tank (secure, valve open & fuel level) ____ ____ add ________________________
Overhead Guard (no damage) ____ ____ ________________________
Seat Belt ____ ____ ________________________
Other (loose, damaged or missing parts) ____ ____ ________________________
After starting engine check the following:
Operational Inspection Status Remarks
Service
OK Needed
Engine (does it sound normal) ____ ____ ________________________
Instruments (check for normal readings) ____ ____ ________________________
Exhaust system (check for leaks & excessive smoke) ____ ____ ________________________
Wipers, Lights & Signals ____ ____ ________________________
Horn & Back Up Alarm ____ ____ ________________________
All Hydraulic controls (Lift, Tilt, side shift) ____ ____ ________________________
Transmission & Clutch (direction & speed range) ____ ____ ________________________
Brakes ____ ____ ________________________
Steering ____ ____ ________________________
________________________
Note anything abnormal or in need of repair:_____
Operator Date ___________
Vehicle # Hour Meter Reading
Revised 7/09
