200/100/70/50 MHz DIGITAL STORAGE OSCILLOSCOPE

GDS-1000B Series
FEATURES

200/100/70/50 MHz : 2 Channel models ;

100/70/50 MHz : 4 Channel models
1GSa/s Maximum Sampling Rate
10M Maximum Memory Depth For
Each Channel
7” 800 x 480 WVGA LCD Display
256 Color Gradient Display Function to
Strengthen Waveform Performance
Ethernet 1Mpts FFT Frequency Domain Signal
Display
I C/SPI/UART/CAN/LIN Serial Bus
The GDS-1000B Series digital storage 1Mpts FFT signal display makes the
Trigger and Decoding Functions
oscilloscopes equip with 200/100/70 frequency domain display function more
Zero Key Function For Horizontal Time,
MHz : 2 Channel models; 100/70/50 delicate. Engineers can clearly observe
MHz : 4 Channel models, that provide the distributed details of frequency Vertical Voltage and Triggering
entry level users with diversified domain signals. Smooth and rapid
selections. The maximum real time response can even better locate where
sampling rate can be up to 1GSa/s. The the problems are originated. Powerful
robust functional performance makes FFT function realizes high efficient
the economical oscilloscope more spectrum analysis measurement which
colorful and allows entry level users to is indispensable for technology and
sumptuously enjoy the fun and value education arenas.
brought by test and measurement which
is precisely the emerging mission of the The GDS-1000B series provides serial bus
test and measurement industry that analysis function with 10M long memory
GW Instek works relentlessly to achieve. depth. Users can trigger, decode, and
analyze frequently used I2C, SPI and UART Front
10M memory depth for each channel serial bus and CAN/LIN bus, which is
yields exquisite measurement results and often used by automotive communications.
allows each retrieved waveform to
successfully reveal the details of signal. The GDS-1000B Series oscilloscopes
Engineers are often baffled by failing to provide the zero key function for vertical
retrieve signal details when measuring voltage scale adjustment, horizontal
basic electric circuit signals. Now,
time scale adjustment and trigger level
GDS-1000B series oscilloscopes, with
adjustment. When processing
10M memory depth for each channel, Rear Panel
complicate waveform adjustment and
are capable to uncover all signal details.
observation, engineers often require the
zero key function to start a new APPLICATIONS
7” 800 x 480 WVGA LCD display and the
measurement, adjust waveform or reset
256 color gradient display function
trigger level. The zero key function can Educational Market - General Purpose
together allow the GDS-1000B Series to
reduce time in turning control knobs
distinctly display waveform details in Instruction
that is a great benefit for engineers.
gradients while measuring fast changing
analog signals. Additionally, 50,000wfms/s Industrial Sector - Fundamental R&D
waveform update rate helps engineers Measurement Applications
clearly understand the gradients of signal
variations and easily identify the problem
of transient signal variations.

GDS-1000B Series Simply Reliable

SPECIFICATIONS
GDS-1054B GDS-1072B GDS-1074B GDS-1102B GDS-1104B GDS-1202B
VERTICAL Channels 4 2 + Ext 4 2 + Ext 4 2 + Ext
Bandwidth DC~50MHz(-3dB) DC~70MHz(-3dB) DC~70MHz(-3dB) DC~100MHz(-3dB) DC~100MHz(-3dB) DC~200MHz(-3dB)
Calculated Rise Time 7ns 5ns 5ns 3.5ns 3.5ns 1.75ns
Bandwidth Limit 20MHz 20MHz 20MHz 20MHz 20MHz 20MHz
Vertical Sensitivity Resolution 8 bit : 1mV~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx. ; GDS-1202B : 1MΩ// 14pF approx.
DC Gain Accuracy* ±3%
Polarity Normal & Invert
Maximum Input Voltage 300Vrms, CAT I (300Vrms CAT II with GTP-070B- 4/100B-4, 200B-4 10:1 probe)
Offset Position Range 1mV/div : ±1.25V ; 2mV/div ~ 100mV/div : ±2.5V ; 200mV/div ~ 10V/div : ±125V
Waveform Signal Process +,-, ×, ÷, FFT, FFTrms, User Defined Expression ; FFT: 1Mpts; FFT: Spectral magnitude. Set FFT Vertical Scale to
Linear RMS or dBV RMS ; FFT Window Display : Rectangular, Hamming, Handing, or Blackman-Harris
TRIGGER Source CH1, CH2, CH3*, CH4*, Line, EXT** ; *four channel models only. ; **two channel models only
Trigger Mode Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width, Video, Pulse Runt, Rise & Fall, Timeout, Alternate, Event-Delay(1~65535 events),
Time-Delay(Duration, 4nS~10S)
Holdoff range 4ns to 10s
Coupling AC, DC, LF rej., Hf rej., Noise rej.
Sensitivity 1div
EXTERNAL TRIGGER Range ±2.5V
Sensitivity DC ~ 100MHz Approx. 100mV ; 100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
HORIZONTAL Time base Range 5ns/div ~ 100s/div (1-2-5 increments)
ROLL 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Timebase Accuracy ±50 ppm over any ≥1 ms time interval
Real Time Sample Rate 1GSa/s max.
Record Length Max. 10Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2nS (typical)
Average selectable from 2 to 256
X-Y MODE X-Axis Input Channel 1; Channel 3*(*four channel models only)
Y-Axis Input Channel 2; Channel 4*(*four channel models only)
Phase Shift ±3° at 100kHz
CURSORS AND Cursors Amplitude, Time, Gating available; Unit : Seconds(s), Hz(1/s), Phase(degree), Ration(%)
MEASUREMENT Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot,
FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses,
-Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors Measurement Voltage difference between cursors (ΔV) Time ; difference between cursors (ΔT)
Auto Counter 6 digits, range from 2Hz minimum to the rated bandwidth
CONTROL PANEL Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset
FUNCTION Save Setup 20set
Save Waveform 24set
DISPLAY TFT LCD Type 7" TFT WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s), infinite persistence
Waveform Update Rate 50,000 waveforms per second, maximum
Display Graticule 8 x 10 divisions
Display Mode YT, XY
INTERFACE USB Port USB 2.0 High-speed host port x1, USB High-speed 2.0 device port x1
Ethernet Port(LAN) RJ-45 connector, 10/100Mbps with HP Auto-MDIX (Only for 4 channel models.)
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard kensington-style lock
POWER SOURCE AC 100V ~ 240V , 50Hz ~ 60Hz , Auto selection , Power consumption: 30 Watts
MISCELLANEOUS Multi-Language Menu Available
Operation Environment Temperature : 0°C ~ 50°C. Relative Humidity ≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Online Help Available
DIMENSIONS & 380(W) × 208 (H) × 127.3(D)mm, Approx. 2.8kg
WEIGHT
The specifications apply when the GDS-1000B is powered on for at least 30 minutes under +20°C~+30°C . Specifications subject to change without notice. DS-1000BGD2DH
ORDERING INFORMATION OPTIONAL ASSESSORIES
GRA-426 Rack Adapter Panel GCP-206P Power supply for current probe
GDS-1202B 200MHz, 2 channels, Digital Storage Oscilloscope GAK-003 50 Impedance Adapter (2 input channel)
GDS-1104B 100MHz, 4 channels, Digital Storage Oscilloscope GSC-008 Soft Carrying Case GCP-425P Power supply for current probe
GDS-1102B 100MHz, 2 channels, Digital Storage Oscilloscope GTL-246 USB Cable, USB 2.0, (4 input channel)
A-B Type, 1200mm GTP-033A Oscilloscope Probe, 35MHz
GDS-1074B 70MHz, 4 channels, Digital Storage Oscilloscope GCP-300 300kHz/200A Current probe 1:1 Passive Probe, BNC(P/M)
GDS-1072B 70MHz, 2 channels, Digital Storage Oscilloscope GCP-530 50MHz/30A Current probe GDP-025 25MHz High voltage differential probe
GDS-1054B 50MHz, 4 channels, Digital Storage Oscilloscope GCP-500 500kHz/150A Current probe GDP-050 50MHz High voltage differential probe
GCP-1030 100MHz/30A Current probe
ACCESSORIES GCP-1000 1MHz/70A Current probe
GDP-100 100MHz High voltage differential probe
User manual CD x 1, Power cord x 1
GTP-070B-4 : 70MHz(10:1/1:1) Switchable passive probe for GDS-1074B,GDS-1072B,GDS-1054B(one per channel)
GTP-100B-4 : 100MHz(10:1/1:1) Switchable passive probe for GDS-1104B, GDS-1102B(one per channel) FREE DOWNLOAD
GTP-200B-4 : 200MHz(10:1/1:1) Switchable passive probe for GDS-1202B(one per channel) Software OpenWave Software Driver USB Driver ; LabView Driver