M ATE R I AL S AF E TY D AT A S HE E T
M SEAL GP
                                SECTION I - IDENTIFICATION OF COMPANY/ BUSINESS
            NAME   :PIDILITE INDUSTRIES LIMITED
            ADDRESS : Ram Krishna Mandir Road, Kondivita, Andheri (E), Mumbai 400 059.
                      Telephone : 91-022-2836 7085. Fax: 91-022-2837 6165. E-mail : rajerm@pidilite.com
            USE     : Two pack (Amine based hardener and Epoxy based resin) epoxy sealent..
                             SECTION II – HAZARDOUS CONSTITUENTS OF MATERIAL
                        COMPONENT                    CAS       PERCENT PERMISSIBLE SHORT TERM
                                                   NUMBER                  EXPOSURE     EXPOSURE
                                                                           LIMIT [TWA] LIMIT[ STEL]
             Epoxy Resin                          25068-38-6 Less than 35%      Not         Not
                                                                            established established
             Polyamide                                       Less than 35%      Not         Not
                    Phenyl Glycidyl Ether          122-60-1                 established established
                   3,6 Diazooctaneethylenediamine 112-24-3
                                      SECTION III- IDENTIFICATION OF HAZARDS
            TOXIC EFFECTS OF EXPOSURE/ CONTACT :
            SKIN CONTACT     : May cause irritation and sensitization to sensitive skin or on prolonged use.
            EYE CONTACT      : May create injury, irritation and sensitization or burns.
            INHALATION      : Not applicable.
            INGESTION        : Harmful. Possible irritation to intestinal tract.
            DELAYED EFFECTS: Not known.
                                          SECTION IV- FIRST AID MEASURES
            SKIN CONTACT    : Wash skin with plenty of water and soap for at least 15 minutes.
            EYE CONTACT       : Immediately flush eyes with plenty of water for at least 15 minutes. Call for
                             Physician if irritations persist
            INHALATION     : Not applicable.
            INGESTION      : Do not induce vomiting. Immediately give two glasses of water to drink. Never
                             give anything by mouth to an unconscious person. Call a Physician.
            NOTE TO PHYSICIAN: No special instruction, treat symptomatically on the clinical conditions.
                              SECTION V - FIRE AND EXPLOSION HAZARD OF MATERIAL
            FIRE EXTINGUISHING MEDIA : Material is not flammable. Use water to extinguish the fire.
            THERMAL DECOMPOSITION PRODUCT : May yield acrid smoke and irritating vapours with oxides
                              of carbon, nitrogen and sulphur.
            SPECIAL FIRE FIGHTING PROCEDURE : Wear self contained breathing apparatus or equivalent
                              [MSHA/ NIOSH - approved].
            UNUSUAL FIRE AND EXPOLSION HAZARDS : Not specific.
                                   SECTION VI - ACCIDENTAL RELEASE MEASURES
            PERSONAL PRECAUTIONS : Use personal protective equipment & handling listed under sections
                          VII & VIII
            ENVIRONMENT PRECAUTIONS : Review fire and safety precautions before proceeding with clean
                          up. Use appropriate personal protective equipment during clean up. Keep
                          spectators away. Collect the spilled material by sweeping the floor in a paper
                          and dispose off in accordance with the local regulations.
            CLEANING METHODS : Not applicable. Wash floor with water after collecting the material.
            INITIALS :                                                                              PAGE : 1/3
            MSDS CODE : 013SD88603                        REV. : 0.4                       DATE : 24.06.2020
PDF created with pdfFactory Pro trial version www.pdffactory.com
                                       SECTION VII- HANDLING AND STORAGE
            HANDLING PROCEDURE            : Use appropriate Personal Protective Equipments [PPEs] during
                                            handling. Protect against physical damage. Suggested to use
                                            suitable barrier cream.
            STORAGE REQUIREMENTS            : Store at cool and dry atmosphere, away from children and food.
                                            Keep container tightly closed when not in use. Maintain good
                                            housekeeping.
                         SECTION VIII- EXPOSURE CONTROL/ PERSONAL PROTECTIVE EQUIPMENT
            PERSONAL PROTECTIVE EQUIPMENT :
            HYGIENE MEASURES         : Do not eat, drink or smoke when working. Wash hands before
                                      breaks and after work.
            EYE PROTECTION            : Use safety goggles.
            HAND PROTECTION           : Use impervious hand gloves for prolonged use. Suggested to use
                                      suitable barrier cream..
            RESPIRATION PROTECTION : None required.
            OTHERS                       : Eye wash facility.
            ENGINEERING CONTROLS     : None required.
                                 SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
                                                              Hardner                   Resin
            PHYSICAL STATE                                : Black Putty                Green Putty
            ODOUR                                        : Amine Odour                 Characteristic Odour
                            0
            BOILING POINT ( C)                           : NA                          NA
            pH                                           : NA                          NA
            VISCOSITY (POISE)                            : NA                          NA
            DENSITY/ SPECIFIC GRAVITY (WATER=1)        : 2.5                           2.5
                          0
            SOLUBILITY (20 C) IN WATER                  :   Insoluble                  Insoluble
                                     0
            VAPOUR PRESSURE AT 25 C                     : NA                           NA
            FLAMMABILITY                                : Combustible.                 Combustible
            FLASH POINT                                : NA                            NA
            EXPLOSIVE LIMITS (% by vol.)                : LEL : NA UEL : NA             LEL : NA UEL : NA
                                    SECTION X - STABILITY AND REACTIVITY DATA
            CHEMICAL STABILITY             : Stable under normal ambient conditions.
            INCOMPATIBILITY                : None.
            HAZARDOUS POLYMERISION        : Will not occur.
            CONDITIONS TO AVIOD            : Not specific.
                                     SECTION XI - TOXICOLOGICAL INFORMATION
            Not known
            INITIALS :                                                                          PAGE : 2/3
            MSDS CODE : 013SD88603                      REV. : 0.4                      DATE : 24.06.2020
PDF created with pdfFactory Pro trial version www.pdffactory.com
                                       SECTION XII - ECOLOGICAL INFORMATION
            Do not allow to enter soil, waterways and open bodies of water.
                                        SECTION XIII - DISPOSAL INFORMATION
            The diking and contaminated material may be incinerated, in an approved equipment or may be
            disposed off according to current local or central regulation.
                                   SECTION XIV - TRANSPORTATION INFORMATION
            The material is not considered as dangerous goods under transportation.
                                      SECTION XV - REGULATORY INFORMATION
            The material is not containing any hazardous substance.
                                    SECTION XVI - MISCELLANEOUS INFORMATION
            DISCLAIMER : The data presented here is based on information we believe to be reliable but
                        unknown risks may be present. We disclaim liability for damage or injury which
                        results from the use of the above data and nothing contained therein shall constitute
                        a guarantee or a warranty (including warranty of Merchantibility or fitness for a
                        particular purpose) or representation (including freedom from Patentability) by us with
                        respect to the accuracy or completeness of the data, the product described or their
                        use for any specific purpose as known to us. The final determination of the suitability
                        of information, the manner of use of information or product and potential infringement
                        of patents is the sole responsibility of the user.
            ABBREVIATIONS USED : NA - NOT APPLICABLE, NH - NON HAZARDOUS,
                                  CI - CONTENT INSIGNIFICANT.
            ISSUED BY SAFETY DEPARTMENT                    R M RAJE           TEL. NO. 2836 7085 EXT. 7277
            INITIALS :                                                                             PAGE : 3/3
            MSDS CODE : 013SD88603                         REV. : 0.4                      DATE : 24.06.2020
PDF created with pdfFactory Pro trial version www.pdffactory.com