2022 Amigurumi designed by

AndryPinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please

do not share or sell the pattern. Amigurumis created
based on the pattern can be marketed.

If you have any questions about the pattern you can

write to me at:

Creative Commons License This work is licensed under a

Creative Commons License.
Creative Commons Attribution-NoDerivatives 4.70
International

Kalu Crochet
AM: magic ring Cad:
chains
Lap number of points at
Nd: Slipped Knot
Number the end of the round.

V10. (1sc, 1inc) *6V

(18)
Aumpa: Increase in Dis: High Point
decreases Tha: Knit taking
back stitch. Thd: Knitting just the thread
Sequence to follow the number of times the
taking
during the lap sequence is repeated
the thread
front of the point.

Creative Commons License This work is under Creative License

Commons Attribution-NoDerivs 4.00 International Kalu Crochet
Pd: slip stitch or dwarf stitch
Pb: single crochet
Mpa: half double crochet
Pa: high point
Aum: increase in bp
Aummpa: Increase in half a point
 Yarn brand: Cotton touch papatya

Materials
(Body) 50gr beige color
Skirt and sandals 30gr
lilac color THREAD: Silvia Cotton (Body,
accessories
and hair)
30gr lilac green color4gr light blue
color10mm safety eyes

021
1.75mm Crochet Hook

1 button of 1/2 cm
Black and white embroidery
threadAcetate, foam, pearls and
siliconeNeedles
and pinsScissors
, stuffing and lots of love
Creative Commons License This work is licensed under a Creative Commons Attribution-
NoDerivatives 4.00 International License Kalu Crochet
 T BE ZA
O

We fill until the piece is but we must

compact, leave a half to introduce the
space in way towards the interior of the
piece that
head.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the Amigurumis created based on the
pattern can be marketed.
the pattern. Kalu Crochet

We are going to knit this piece with beige V 1. Am 6pb

yarn or the color you chose for the body, V 2. 6inc of Pb (12)
the head is knitted in a spiral. V 3. 1sc, 1 inc *6v (18)
V 4. 1sc, 1 Inc (2sc, 1inc*5v)1sc(24) V28. 9sc, 1dec *6v) (60)
V 5. 3sc, 1 inc *6v (30) V29. 4sc, 1dis (8sc, 1dis *5v) 4sc (54)
V 6. 2sc, 1inc (4sc.1inc*5v)2sc(36) V30. 7sc, 1dec *6v (48)
V31. 3sc, 1dis (6sc, 1dis *5v) 3sc (42)
V 7. 5sc, 1 inc *6v (42)
V32. 5sc, 1dec *6v (36)
V 8. 3sc, 1inc (6sc,1inc*5v)3sc(48)
V33. 2sc, 1dis (4sc, 1dis *5v) 2sc (30)
V 9. 7sc, 1inc *6v (54) V 34. 3sc, 1dec *6v (24)
V10. 4sc, 1inc (8sc,1inc*5v)4sc(60) V 35. THA 24sc (1round)
V 11. 9sc, 1inc *6v (66) V 36-49. 24 (14 laps)
V 12. 21sc, 1inc *3v (69) V 50. 2sc, 1dec *6v (18)
V 13-26. 69sc (14 rows) V 51. 1sc, 1dec *6v (12)
EYES: between V20 and 21 with 12pb V 52. 6dis
distance. (we cut the thread and with the help of a
V 27. 21sc, 1dec *3v (66) needle we close the 6 sc that we have
left in round 52.
 DETAILS

Nose: We embroider it in the middle of rounds 22 and

23 taking 3 sc.

EMBROIDERY: With white thread we will

embroider an eyelash below each eye and
with black thread we will embroider two
eyelashes on the upper part towards the
outside of the eye.
For the cheeks, we apply pink blush two
turns lower, diagonally towards the eyes.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis
created based on the pattern can be marketed.
Kalu Crochet
 LEGS
We are going to knit two pieces with beige yarn, this piece is knitted flat and in a spiral, we start
with 6 chains, we leave a chain free from the crochet and we knit:
V1. We start with 4 sc, in the last chain we knit 3 sc, we continue knitting 3 sc at the other end
of the chains and we finish with 1 sc inc (12)
V2. 1aum, 3sc, 3aum, 3sc, 2aum (18)
V3. (1sc, 1inc) 3sc (1sc, 1inc *3v) 3sc (1sc, 1inc *2v) (24)
V4. THA 24sc (1 round)
V5-7. 24 sc in each round (3 rounds)
V8. 6sc, 5dec, 8sc (19)
V9. 6sc, 1dis, 1sc, 1dis, 8sc (17)
V10-23. 17 sc in each round (14 rounds)
We fill, cut long thread and finish the work.

We are going to mark the internal points of the legs where we will make the union to start with
the body.
We are going to fold the legs and in the points that remain in the middle we place a marker, in
my fabric the points are in Leg 1 point 7 and in Leg 2 point 14 (I recommend you measure first
and make sure that the feet are straight, since the location of the point can vary depending on
the level of fabric tension)

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern
can be marketed.
 BODY

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern. w Qroche+
Amigurumis created based on the pattern can be marketed. au rock
Let's take Leg 1 and insert the hook into point 7 that we marked, with light lilac thread we make
a slip knot and pass it through the point, we continue knitting 4 chains and take Leg 2 and insert
the hook into point 14 that we marked and make 1 sl st, in this way we join the two legs and
continue knitting to start the first round of the body;
V1. We knit 17 sc on the second leg, continue knitting 4 sc over the chains, move on to the first
leg, knit 17 sc and finish with 4 sc over the chains. (42) V2-6. 42 sc in each round (5 rounds)
V7. 5pb, 1dec *6 (36)
Color change to Beige
V8-9.36sc in each round (2 rounds)
V10. 10sc, 1dec *3v (33)
V11-15. 33sc (5 rounds)
V16. 9sc, 1dec *3v (30) 2021

V17. 3sc, 1dec *6v (24)

V18. 2sc, 1dec *6v (18)
V19. 7sc, 1dec *2v (16)
V20-36. 16sc (17 rows)
V 37. 8dis
We fill, cut the long thread and with the help of a needle we close the 8 stitches that we had left
in R37.
V 1. AM 5pb
V 2. 5inc sc (10)
V 3. 10sc (1 round)
V 4. 4sc, 1puff stitch (3 double crochets in the same stitch) 5sc (10)
V 5. 10sc (1 round)
V 6. 3sc, 1 dis *2v (8)
V 7-16. 8 sc in each round (10 rounds)
We are going to sew the head to the body with the help of beige thread and a needle.
We insert the needle into a point of V1 of the head and pass it through the middle of the head, we take the
base of the neck and with the needle we pass through the base of the neck in the middle of rounds 28 and 29,
then we take the needle through the inside of the head and pass it towards the first round of the head. We
generate tension on both sides of the thread and insert the neck into the head, after holding it very well we knot
it at the top of the head and lose the strands.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern
can be marketed.
V1. We start by knitting 32std, we leave 2 chains free and in the next
one we are going to knit the first cup (we knit 4dc, we continue
knitting 27chains, we leave one free from the hook and we go back
knitting st over the chains. For a total of 26std - we are going to knit
4dc in the same chain where we knitted the first 4dc to complete the
cup in this way) we leave 2 chains free and in the next one we knit
1std, we continue with 2std, we leave 2ch free and we are going to
knit the second cup (we knit 4dc, we continue knitting 27chains, we
leave one free from the hook and we go back knitting st over the
chains. For a total of 26std - we are going to knit 4dc in the same
chain where we knitted the first 4dc to complete the cup in this way)
we leave 2ch free and in the next one we knit 1std, we are going to
continue knitting pd over the chains, in total we knit 32pd, we cut long
strand and finish work.
 HAIR
We are going to knit with light blue thread, first we are
going to knit the base, to continue knitting the strips for the
hair. We start with a slip knot and knit 13 chains, from the
crochet hook we leave a free chain and in #2 we knit 1 inc
of sc, we continue knitting 10 sc and in the last chain we
are going to knit 4 sc, which allows us to continue knitting
through the other end of the chains, we knit 10 sc and
finish with 1 inc of sc, we close the round with 1 sl st and
we are going to continue knitting the strips, for each strip
we are going to go up the work with 62 chains, we leave 2
chains free and in #3 we knit the first stitch, we are going
to knit 5 inc of hdc, we continue with 55 hdc, and we close
at the base stitch with 1 sl st, we are going to repeat the
instructions to knit each strip, in total we must knit 28
strips, when we get to the last one we close with 1 sl st
and cut a long strand to assemble it to the head.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern
can be marketed.
Kalu Crochet
M E NATIO -
C ABELL E
N
We place the base of the hair on the head vertically, taking as a reference point the first turn of the head
so that the base is centered, in the front we leave 6 strips which we are going to use to shape Amelia's
hairstyle, We start from the back we fix the strips to the base of the head with pins, we take the strips from
the sides they should be approximately 5sc away from the eyes, we are going to take three strips on the
sides to complement Amelia's hairstyle for which we sew these strips to the head taking into account that
the seam is at eye level, then with the thread that we had left when we finished weaving the hair we sew
the base and the strips to the head of the doll. I recommend that you first secure the base with pins,
continue with the back strips and finally continue with the sides. We take the front strips and take 3 to the
right and 3 to the left, placing them diagonally over the strips that we sewed previously, we are going to
braid these three strips and take them over the sides to the back where we are going to sew them, then
we take the three strips on the sides that were left underneath and we are also going to braid them,
placing the braid underneath we take it to the back of the head and join it over the first braid that we made
to give the final detail to the hairstyle, the other strips are left loose towards the back.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern.

Amigurumis created based on the pattern can be marketed. Kalu Crochet

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.
All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern can
be marketed.
Kalu Crochet
 SKIRT
We are going to knit with strong lilac thread. We start with a slip knot and knit 50 chains, we leave 8 chains free and in #9 we knit
the first stitch of R1.
V 1. We knit 42 sc, to continue with the next round we join the last stitch to the first stitch of the round with 1 sl st.
V 2. We are going to leave 2 free stitches and in the next one we knit 5dc (to form the first fan) we leave 2 free stitches and close
with 1sc, we are going to repeat the above until we knit 7 fans.
V 3. On the first st that we knitted in round 2 we are going to go up the work with 3ch and knit 2dc, we are going to knit 1dc on
stitch 3 of the first fan in R2 and continue on the slipped stitch knitting 5dc to knit the first fan, we close with 1dc on stitch 3 of the
fan in R2, this is the sequence we are going to follow, we knit a fan of 5dc over the sts in R2 and close with 1dc on stitch 3 of the
fans in R2. When we reach the end of the round we will knit 2dc at the point where we started to complete the fan and close with sl
st to the chains.
V 4. We start this round by knitting the first fan of 5dc over the first st of R3, we knit the dc and close with 1 st in point 3 of the first
fan of R3. We are going to repeat the above until completing the round and we close with 1 st at the joining point of V3 - that is, on
the last fan. 2 0 2 1
V 5. We go up the work with 3ch, we knit 2dc to form half of the fan and we are going to close with 1sl st on point 3 of the fan of
R4, we continue knitting a fan of 5dc on the st of the previous round and we close with 1sl st on point 3 of the fan of the previous
round, we are going to repeat the sequence until completing the round, at the end we are going to knit 2dc in the same point
where we started to complete the fan and we close with 1sl st on the chains.
As you can see, the rounds are alternated. In some we start with the complete fan and in others we increase the work with 3
chains and we knit only half of the fan.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not sell Amigurumis created share or sell the pattern.
based on the pattern.
Kalu Crochet
 SKIRT
V 6. We are going to knit over the st of the previous round 5hdc for the first fan and close with 1hdc over the st3 of the fan of the
previous round, we are going to repeat the above by knitting 5hdc over the sts and closing with 1hdc over the st3 of the fan of the
previous round until completing the round, in total there are 7 fans.
V 7. In this round we will start with 3ch and in the same point we knit 2hdc to form half of the fan, we continue with 1sl st on the
st3 of the fan from the previous round and we knit on the st 5hdc to form the fan, we close with 1sl st on the st3 of the fan from the
previous round and we will repeat this step until completing the round to finish we knit, 2hdc in the point where we started and
close with 1sl st to the ch3 to give shape to the fan.
V 8. We will start by knitting the first fan of 5hdc over the st from the previous round, we continue with 1stdc over the st3 of the
fan from the previous round, we will repeat the above until we complete the 7 fans and we finish by closing with 1stdc.
V 9. We go up the work with 2 ch and knit 5 sc over the fan stitches and 1 hdc over the sl st, again 5 sc and 1 hdc over the
slipped stitch from the previous round, we knit this sequence until completing the round, when finished we close with 1 sl st over
the chains from the beginning. 2021
V 10. We go up the work with 3 ch and we knit the sequence of 1 dc, 1 inc *8 sts, we continue with 2 sc, 4 sts, 2 sc and we knit
again 1 dc, 1 inc of dc *8 sts, we knit 1 dc and we close with 1 st to chain 3.
V 11. We go up the work with 3ch and knit 2dc, 1inc *8v, continue with 2sc and taking the back loop of the sts from the previous
round, we knit 4std, continue with 2sc and the sequence of 2dc, 1inc *8v, finish with 1dc and close with st.
We cut the thread, finish the work and lose the thread in the fabric. We sew the button on the last stitches of R1.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not sell Amigurumis created share or sell the pattern.
based on the pattern.
Kalu Crochet
2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.
All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern can be
marketed. Kalu Crochet
2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.
All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern can be
marketed. Kalu Crochet
We are going to start by knitting the pieces for the sole of the shoes, we are going to knit with LILAC thread flat and in a spiral, with the
following instructions we are going to knit 4 pieces.
We start with a slip knot and knit 6 chains, leaving 1 chain free
and in the next one we knit:
V1. 1inc, 3sc, we knit 4sc in the last chain, we continue knitting
3sc through the other end of the chains, we finish with 1inc. (14)
V2. 2aum, 3sc, 4aum, 3sp, 2aum (22)
V3. (1sc, 1inc *2v) 3sc (1sc, 1inc *4v) 3sc (1sc, 1inc
*2v) (30).
We cut a long thread and match the fabric with a magic chain.
With one of the pieces we are going to make a mold in the
acetate, the mold should be smaller than the piece, we are
going to stick the mold to the back of one of the pieces and
then apply silicone and stick the second piece also on the
back, that is, for each sole we are going to join two pieces and
in between the two pieces there should be the acetate sheet, we must keep in mind that the right side of the two pieces should be facing
outwards.
After gluing the pieces to the sheet, we are going to insert the crochet hook in the first stitch of R3, going through the stitches of both pieces.
With lilac thread we make a slip knot and pass it through the stitch. We are going to insert the crochet hook in the next stitch and we are going
to knit a slip stitch in each stitch of R3, taking the stitches of both pieces. In total we are going to knit 30 sts. This allows us to join the pieces
and form the sole, giving firmness to the sole of the sandal. Finally, we cut the thread and finish the work.
To knit the upper part of the sandal we will place the hook on
the slipped stitch #24, insert the hook from the outside to the
inside of the piece and with lilac thread we make 1st, pass the
thread through the stitch, go up the work with 1ch and in the
same stitch we knit 1sc, we will continue knitting 2sc to
complete R1, once the 3sc are ready we knit 1ch and turn the
fabric for the next round:
V2-14. 3 sc in each round (13 rounds)
We cut a long thread and with the help of a needle we are
going to sew the 3 sc of row 14 to the sts of the sole, we are
going to sew them on sts 8, 9 and 10, before sewing you must
measure that the strip of the upper looks straight at both ends if
it is facing forward you must sew it from st7 of the sole.
 HAIR ACCESSORIES
With lilac thread we are going to weave the strip that goes in the front part over the hair, we leave a long strand and start with 1st
and weave 70 chains, once the chains are ready we cut a long strand and adjust the weave, we are going to glue half of the piece
on the front part of the hair and take the ends to the sides, with the help of a needle we take the thread that we left at each end and
sew towards the inside of the main braid. We are going to decorate by gluing pearls on the chains and around the hair.

We are going to knit the stars with pink thread, with the following instructions we knit two pieces. We make a magic ring and knit:
1sc, 1dc, 1ch, 1dc (repeat the above 5 times) cut a long strand, close the magic ring, and join the last stitch to the first with a
magic chain. We sew the hair onto the shell, for the final detail we add glitter or sparkle.

2022 Amigurumi designed by Andry Pinzón for Kalu Crochet.

All rights RESERVED, pattern for personal use, please do not share or sell the pattern. Amigurumis created based on the pattern
can be marketed.
Kalu Crochet
Thank you for purchasing Analu's pattern. This document is only for 1 person. You will not be able to share it or make
modifications. By downloading this material you agree to use it individually.
No part of this document may be distributed, published on the Internet, edited or resold.
All contents of this material are protected under copyright.
Thank you for respecting and appreciating my work and that of the entire creative team that helped create this material.

If you have any questions about the pattern you can

write to me at:

Creative Commons License This work is licensed under a Creative Commons Attribution-No Derivatives 4.0 International
License