Scribd
Upload
146 views2 pages

FX1000A

The FX1000A Speed Controller is designed for easy connection and operation, allowing users to control motor speed via a front panel potentiometer and digital display. It features a slow up and down setting with a time range of 0.01 to 5 seconds, and operates on a rated input voltage of 200~240VAC. The device is compact, weighing 300g and measuring 60(W) x 100(H) x 117.5(D)mm.

Uploaded by

anhhoack3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
146 views2 pages

FX1000A

The FX1000A Speed Controller is designed for easy connection and operation, allowing users to control motor speed via a front panel potentiometer and digital display. It features a slow up and down setting with a time range of 0.01 to 5 seconds, and operates on a rated input voltage of 200~240VAC. The device is compact, weighing 300g and measuring 60(W) x 100(H) x 117.5(D)mm.

Uploaded by

anhhoack3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

B AC Motors

Speed Controller FX1000A

FX1000A Speed Controller

Features
Easy Connection
Control units combine the control pack, potentiometer and capacitor into on device. Operation is possible just by connecting the control unit into power
supply after connecting the motor and control unit together using the connector.

Easy Operation
The speed can be set easily with the potentiometer on the front panel of the control unit.

Digital Display
The motor speed can see directly on the front panel of display of the control unit.

Slow up & Down Setting


Setting time range : 0.01sec~5sec

.LULYHS:WLJPÄJH[PVUZ
Item :WLJPÄJH[PVU Item :WLJPÄJH[PVU
Rated Input Voltage 200~240VAC 50/60Hz Ambient Temperature -10 ~+55
Voltage Regulatio ±10% Ambient Humidity 35~85% RH
Power Consumption Below 4VA Weight 300g
Phase Loop Control
Control Mode Dimension 60(W) X 100(H) X 117.5(D)mm
(0 to 220VAC)

Input Frequency 10Hz-360Hz (TACHO) Insulation Resistance

Power On/Off Signal Red 3Ø LED Dielectric Strength

Speed Set Range 100~1750r/min Measurement CAT lll


Slow up & down Setting Setting time range: 0.01 sec ~ 5 sec

Circuit Diagram

B-179 AC Motors Speed Control System


Speed Controller FX1000A
Dimensions

Connection Diagrams
Speed Control Induction Motor / Speed Control Reversible Motor / Speed Control Clutch & Brake Motor

Speed Control Brake Motor

* SW Contact Capacity: AC125V or AC250 5A minimum


Ro and Co indicate CR circuit for surge suppression. [Ro=5~200Ω, Co=0.1~0.2 , 200WV (400WV)]

1) At first connect each terminal on the rear panel of the controller with the motor as instructed in connection diagram. And then input the external power to both of
the terminal ‘AC’ for the rated speed operation. Now you can adjust the main volume on the center of front panel to control the output speed of motor.
2) Direction: Clockwise COM+CW, Counterclockwise COM+CCW 3) Capacitor: Connect 3-9 or 6-9, according to its capacity
4) For the connection method of the clutch & brake part, refer to the diagram of [Clutch & Brake Connection Diagram].
5) When using powerful fan (F2 type) attached motor, connect two black wires of the fan to No.1 and No.2 terminals in order to supply power.

DKM AC/DC Geared Motor and Gearbox B-180

You might also like