RE-120GR
Agent Release Panel
Product Overview Special Features:
RE-120GR is a microprocessor based Agent Release ?
Ravel Indian Manufacturer, International standard.
Panel. These panel are a feature packed control unit Modular Construction, Serviceable.
?
performing dual function of detection and controlled Special logic circuitory to prevent accident release.
?
release of gaseous agent. These panels have 2 Auto Resettable Fuse.
?
detection circuits and 1 agent release circuit with Surge Protected.
?
various programmable options. The panel have all the Battery polarity & deep discharge protection.
?
safety features to prevent accidental release, easy to Variable solenoid ON / OFF time.
?
install, commission with user friendly programmable 2 No’s of programmable Initiating Device Circuit
?
option, this panel is ideal choice to protect the and 1 No. of Releasing Agent circuit.
premises.
Features:
Operates on 220 VAC supply
?
Battery backup with built in charging.
?
16 X 2 LCD Dot Matrix Display.
?
Evacuate and Key pad Enable, Disable Facility.
?
Low battery visual warning with audible tone.
?
Relay output for actuators.
?
Provision for Remote fire with Audio / Visual Indications.
?
Compatible to all types of conventional detectors.
?
Zone Disable (Isolation) facility with loop voltage cut off.
?
Resettable 24 VDC output for 4 wire detectors.
?
Three 24V Sounder Output (Fire, after Cross zone,
?
after gas release).
Two mode operation facility (Auto / Manual).
?
Programmable Solenoid Output with ON and OFF Timer.
?
Programmable Main / Standby Cylinder output Facility.
?
Gas Inhibit and Instant release facility.
?
Manual Gas Release with or without timer.
?
Actuator pressure low sensing facility.
?
RS 485 Output for Repeater.
?
Electrical Specification
Power Releasing Agent Circuit
220-240 VAC, ± 10%, 50 Hz, 100W. Operating Nominal Voltage : 24 VDC
Wire size: 1.5 Sq. mm with 600V insulation Solenoid output : 0.75A
Battery (Lead Acid only) End-Of-Line Resistor : 4.7K, 1/4watt (for
Charging Voltage : 28 VDC, ± 2%. Solenoid Output)
Charging Current : 0.5 Amps (Max)
System Quiescent Current : 100mA Relay Outputs
1 Form C relay for Fire, Fault and Cross Zoning.
Initiating Device Circuits (Zone Circuit)
All zones are Class B wiring Contact Rating: 2A @ 30 VDC & 0.5 A @125VAC.
Normal Operating Voltage : 14 - 21 VDC
Alarm Current : 15 - 30mA 24 VDC Power For remote devices (Optional)
Short Circuit Current : 40mA Maximum Operating Voltage : 24VDC, 300mA Max.
Loop resistance : 50 ohms Maximum
End-Of-Line Resistor : 4.7K, 1/4watt Operating Condition
Standby Current : 6.8mA Operating Temperature 0 - 49° C / 32-120° F.
(2.4mA for Detectors) Storage Temperature 0 - 60° C
Relative Humidity 93 ± 2% RH (non-condensing) at
Notification Appliance Circuits (Sounder / Strobe Circuit)
32 ±2° C / 90 ± 3° F.
1) Supervised : 1 No
Operating Nominal Voltage : 24 VDC
Operating Current : 0.75A (Max)
End-Of-Line Resistor : 4.7K, 1/4watt
2) Non - Supervised :2 No’s
Operating Nominal Voltage : 24 VDC
Operating Current : 0.3A (Max)
End-Of-Line Resistor : 4.7K, 1/4watt
Mounting Detail: ø19
30 30
30
30
Note:- All Dimensions are in MM
35
200
Mechanical Specification:
Dimensions : (400W X 300H X 100D)
Color : Red / White
Construction : 18 Gauge (1.22mm) CRCA sheet with powder-coated Finish
IP Rating : IP50
Cable Entry : 09 x ø19mm Knockout in top of the cabinet
Weight : 7 Kg
Wiring Diagram:
Note:
D1,D2 - Two wire detectors
Initiating Device Circuit
Bd1, Bd2 - Four wire detectors.
IDC’s are 1 & 2, Class B StyleB/C
EOL - End Of Line Resistor
End of Line - 4K7 1/4W
NAC - Notification Alarm Circuit (Sounder)
IDC - Initiating Device Circuit (Zone)
All the field wiring circuits are supervised.
¤
All the field wiring circuits are Power limited except 220 VAC and Battery.
¤
Compatible Devices:
MODELS DESCRIPTION
RE-4K7 End Of Line Resistor
Ordering Information:
MODEL DESCRIPTION
RE-120GR-W 2 ZONE Agent Release Panel
RE-120GR-R 2 ZONE Agent Release Panel
Note: R- Red Color; W-White Color
India: United Kingdom:
RAVEL ELECTRONICS PVT LTD., RAVEL ELECTRONICS LTD.,
(An ISO 9001 Certified Company) Unit 11, Chancel Industrial Estate, Newhall street,
150A, Electronics Industrial Estate, Perungudi, Chennai - 96 .India. Willenhall WV13 1NX, West Midlands, United Kingdom.
E-Mail: marketing@ravelfire.com; Web : www.ravelfire.com E-mail: info@ravelfire.co.uk ;Web: www.ravelfire.co.uk
*In the interest of improving quality and design, Ravel reserve the right to change the specification without prior notice. RE-120GR / REV 01 / 2016-2017
