NATIONAL FACTORY / SAUDI REGISTER

For Grilles & Central Air Conditioning Filters

KEC - Hotel &

Apartment Towers

DESCRIPTION
Nos Table Content
A Complinace Statement
B Bill of materials
C Catalogue copies and Technical data sheet
D Country of origin certificate
E Declaration of conformity
F Warranty Letter
G Previous project approvals
H Proposed material company profile
I ISO Certificate
J Local supplier company profile
K Trade license
L Agenncy letter
M Project references
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

1. COMPLIANCE STATEMENT
 COMPLIANCE STATEMENT
Project : Hilton Hotel & Residences Madinah
Contractor : ALFANEYAH
GRILLES, DIFFUSERS, LOUVERS, VOLUME CONTROL DAMPERS, FIRE DAMPERS & ACCESS DOOR
Manufacturer Supplier: National Factory / Saudi Registers for Grilles & CAC Filters.
Proposed
S/N SECTION 233700 - AIR OUTLETS AND INLETS Remarks
material
PART 2 -PRODUCTS
2.01 GRILLES
Grilles shall be if aluminum extrusion of the types and sizes shown on the drawings and in the schedules and be of the concealed fixing type. Noted
A. Where the size is not indicated. The grilles shall be selected for the air volume flow rates indicated in the schedules to achieve the required throw,and be
within the relevant noise level for the area being served.
All grilles shall be provided with an aluminum opposed blade multi leaf damper, with loose key to allow adjustment of the concealed adjuster from the Grille OBD can be operated
B. face of the grille. One loose key for every 20 grilles shall be provided.
by flat srew driver.

C. Each supply grille shall have two sets of individually adjustable aluminum blades, one set horizontal, the other vertical. AG101BDZ COMPLIED
Extract grilles shall be as indicated on the drawing, and in the schedules. Where the grilles does not have to be matched to the supply grille, it shall be of
D. the eggcrate type, unless otherwise specified in the schedules. Noted

E. For Kitchens and dining rooms, grilles shall have quick release sub frames. AG161,AG163 Comply
Non vision grilles as shown on the drawings and shall be of the inverted chevron type, comprising a non-vision insert core held firmly between two AG181Z
F. mating flanged frames, For door mounted applications, grilles shall be rattle-proof and provided with screw fixings and telescopic aluminum frames. COMPLIED

All grilles shall be supplied with a stove enamel paint finish to an approved color as approved by the Employer's Representative to match with the ceiling
Electrostatic thermosetting
G. finish.
polyester powder coating.

2.02 DIFFUSERS
Air diffusers shall be supplied and installed in accordance with the duties, sizes and locations shown on the Drawings.
A. Noted
Square diffusers for both supply and return air shall be manufactured from extruded aluminum and shall be supplied complete with opposed blade AF704BIZ
B. volume damper control dampers. Both dampers and grilles shall have concealed screw type fixings. Spring clip fixings shall not be permitted. 4-way Square SCD

Where a supply diffuser is directly connected to a stub duct which has a straight length of less than two diameters or equivalent diameters, then an
C. equalizing grid of deflector shall be used. Noted

The frames of all diffusers shall be provided with positive seals with the except of those mounted on exposed ductworks. Frames shall be of a type
D. compatible with the ceiling type or wall finish. COMPLIED

Linear slot and continuous slot diffusers shall be constructed from extruded aluminum and shall be supplied complete with pattern control element.
E. Linear slot diffusers shall have mitered flanges, end caps and concealed fixing straps. Spring clip fixing shall not be permitted. Where linear slot diffusers COMPLIED
cross partition locations, closure plates shall be provided to give a neat termination line either side of the partition.

F. All return air square diffusers shall be identical to the supply air diffusers within each conditioned zone. COMPLIED
 All diffusers shall be supplied with a stove enamel paint finish to an approved color as approved by the Employer's Representative to match with the
G. ceiling finish. COMPLIED

All diffusers shall be provided with galvanized steel plenum boxes line with acoustic insulation. The plenums shall be sized to match the diffuser and be
Electrostatic thermosetting
H. complete with fixing lugs and incorporate a cone iris central damper adjustable from the diffuser face and sized to restrict the re-generated noise level.
Plenums shall also include pivot tube connections for use in commissioning of systems. polyester powder coating

The Contractor shall ensure that the grille and diffuser manufacturer assesess volume flow, throw, maximum noise
I. level and maximum pressure drop data as shown in the schedules and confirm that his selections comply with the stated parameters. Noted

Special radiussed continuous slot diffusers shall be manufactured from site dimensions to ensure full co-ordination with the ceiling. Drawing / pattern required
J.
for curved LSD.
2.03 LOUVERS
Air intakes and discharges associated with air handling plant shall consist of ducted connections made to flanged openings formed in the galvanised
A. Contractor's scope
sheet steel blanking plates fixed to the rear of the building weather louvres complying with Division 10.
B. The blanking plates shall be used to cover over un-used areas of the weather louvers. Contractor's scope
Sand trap louvers shall be incorporated into air intake ductwork sections where indicated. The sand collection efficiency of the sand trap at a face AG644Z
C. velocity of 0.6 m/s shall be not less than 80% with a sand having 92% of particles falling within the 150 to 425 microns range. The pressure loss shall no COMPLIED
exceed 30 Pa.
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

2. BILL OF MATERIALS
HILTON HOTEL
Item Description
BASEMENT
233700 - Air Outlets and Inlets
Supply and install air outlets and inlets including all connection, fixing, necessary
accessories etc. complete as specified and shown on drawings
Supply Ceiling Diffuser
A Size, 225 x 225mm, Ref. SCD
B Size, 300 x 300mm, Ref. SCD
C Size, 375 x 375mm, Ref. SCD
D Size, 450 x 450mm, Ref. SCD
Supply Linear Slot Diffuser
E 2 slot, length 2000mm
Supply Air Grille
F SAG, 350 x 150mm size
G SAG, 450 x 250mm size
H SAG, 550 x 250mm size
J SAG, 600 x 450mm size
K SAG, 750 x 300mm size
L SAG, 750 x 450mm size
M SAG, 900 x 300mm size
N SAG, 900 x 350mm size
P SAG, 900 x 450mm size
Q SAG, 900 x 400mm size
Return Ceiling Diffuser
A Size, 225 x 225mm, Ref. RCD
B Size, 300 x 300mm, Ref. RCD
C Size, 375 x 375mm, Ref. RCD
D Size, 450 x 450mm, Ref. RCD
Return Linear Slot Diffuser
E 2 slot, length 2000mm
Return Air Grille
F RAG, 350 x 150mm size
G RAG, 450 x 250mm size
H RAG, 550 x 250mm size
J RAG, 600 x 450mm size
K RAG, 750 x 300mm size
L RAG, 750 x 450mm size
M RAG, 900 x 300mm size
N RAG, 900 x 450mm size
P RAG, 900 x 400mm size
Extract air grills in ducts
A Fixed to PED 400 x 300mm size duct
B Fixed to PED 500 x 250mm size duct
C Fixed to PED 700 x 400mm size duct
D Fixed to PED 750 x 400mm size duct
E Fixed to PED 850 x 450mm size duct
F Fixed to PED 900 x 350mm size duct
G Fixed to PED 1000 x 400mm size duct
H Fixed to PED 1000 x 500mm size duct
J Fixed to PED 1000 x 650mm size duct
K Fixed to PED 1100 x 300mm size duct
L Fixed to PED 1150 x 350mm size duct
M Fixed to PED 1150 x 400mm size duct
N Fixed to PED 1250 x 600mm size duct
P Fixed to PED 1250 x 650mm size duct
Q Fixed to PED 1250 x700mm size duct
Extract air grills in ducts (cont'd)
A Fixed to PED 1300 x 550mm size duct
B Fixed to PED 1300 x 650mm size duct
C Fixed to PED 1350 x 650mm size duct
D Fixed to PED 1450 x 700mm size duct
E Fixed to PED 1500 x 550mm size duct
F Fixed to PED 1500 x 650mm size duct
G Fixed to PED 1550 x 650mm size duct
H Fixed to PED 1600 x 750mm size duct
J Fixed to PED 1850 x 650mm size duct
PODIUM
233700 - Air Outlets and Inlets
Accessories
Supply and install air outlets and inlets including all connection, fixing, necessary
accessories etc. complete as specified and shown on drawings
Supply Linear Slot Diffuser (SLSD)
A 2 slots, 2000mm long
Return Linear Slot Diffuser (RLSD)
B 2 slots, 2000mm long
C 3 slots, 2000mm long
D 4 slots, 2000mm long
E 2 slots, 1000mm long
Supply Ceiling Diffuser
F Size, 150 x 150mm, Ref. SCD
G Size, 225 x 225mm, Ref. SCD
H Size, 300 x 300mm, Ref. SCD
J Size, 375 x 375mm, Ref. SCD
K Size, 450 x 450mm, Ref. SCD
L Size, 600 x 600mm, Ref. SCD
Return Ceiling Diffuser
A Size, 150 x 150mm, Ref. RCD
B Size, 225 x 225mm, Ref. RCD
C Size, 300 x 300mm, Ref. RCD
D Size, 375 x 375mm, Ref. RCD
E Size, 450 x 450mm, Ref. RCD
F Size, 600 x 600mm, Ref. RCD
G Size, 225mm dia, Ref. RCD
Supply Air Grille
H SAG, 350 x 350mm size
J SAG, 450 x 200mm size
K SAG, 450 x 250mm size
L SAG, 450 x 350mm size
M SAG, 450 x 450mm size
N SAG, 600 x 750mm size
P SPG, 500 x 400mm size
Q SPG, 900 x 400mm size
Return Air Grille
A RAG, 350 x 350mm size
B RAG, 450 x 200mm size
C RAG, 450 x 250mm size
D RAG, 450 x 350mm size
E RAG, 450 x 450mm size
F RAG, 600 x 450mm size
Flow Bar / Supply Linear Grille
G Size approximately, 5000mm long
TOWER
233700 - Air Outlets and Inlets
Accessories
Supply and install air outlets and inlets including all connection, fixing, necessary
accessories etc. complete as specified and shown on drawings
Supply Linear Slot Diffuser (SLSD)
A 1 slots, 2000mm long
B 2 slots, 2000mm long
C SLBG, 1500mm long
Return Linear Slot Diffuser (RLSD)
D 1 slots, 2000mm long
E 2 slots, 1000mm long
F 2 slots, 2000mm long
G RLBG, 1500mm long
H 3 slots, 2000mm long
I 4 slots, 2000mm long
J 1 slot, 500mm long
Supply Ceiling Diffuser
Size, 150 x 150mm, Ref. SCD
H Size, 225 x 225mm, Ref. SCD
Return Ceiling Diffuser
J Size, 225 x 225mm, Ref. RCD
K Size, 300 x30mm
L Size, 230mm dia
M ECD 150mm
Air Louvers
A Fresh air louver, size 6400 x 1000mm
B Extract air louver, size 1000 x 1000mm size
Extract air grills in ducts
C Fixed to EAD 150 x 150mm size duct
D Fixed to EAD 150 x 200mm size duct
E Fixed to EAD 200 x 150mm size duct
F Fixed to EAD 200 x 200mm size duct
G Fixed to FAD 150 x 150mm size duct
H Fixed to FAD 150 x 200mm size duct
J Fixed to FAD 200 x 200mm size duct
K Fixed to EAD 250 x 200mm size duct
Supply Air Grille
K SAG 450 x 200mm
L SAG 600 x 300mm
M SAG 750 x 300mm
P SPG, 900 x 400mm size
Q SAG 450 X 250mm
R SAG 550 X 250mm
S SPG 500 X 400mm
Return Air Grille
A RAG 450 x 200mm
B RAG 600 x 300mm
C RAG 750 x 300mm
D RAG 450 x 250mm
E RAG 550 x 250mm
TENDERER'S ADJUSTMENTS FOR DIVISIONS 21-23 AND 25-28
AIR OUTLETS
 BRANDED
RESIDENCES
Item Description

BASEMENT
233700 - Air Outlets and Inlets
Supply and install air outlets and inlets including all connection, fixing,
necessary accessories etc. complete as specified and shown on drawings

Supply Ceiling Diffuser

A Size, 375x 375mm, Ref. SACD
B Size, 450x 450mm, Ref. SCD
0 Supply Linear Slot Diffuser
C 2 slot, length 1000mm
D 2 slot, length 2000mm
0 Supply Air Grille
E SAG, 450 x 150mm size
F SAG, 450 x 250mm size
G SAG, 450 x 450mm size
H SAG, 500 x 250mm size
J SAG, 550 x 250mm size
K SAG, 600 x 450mm size
L SAG, 800 x 400mm size
M SAG, 1050 x 500mm size
N SAG, 750 x 300mm size
Return Ceiling Diffuser
A Size, 375 x 375mm, Ref. RACD
B Size, 375 x 375mm, Ref. RCD
C Size, 450 x 450mm, Ref. RCD
0 Exhaust Ceiling Diffuser
D Size, 150 x 150mm, Ref. ECD
0 Return Linear Slot Diffuser
E 2 slot, length 1000mm
F 2 slot, length 2000mm
0 Return Air Grille
G RAG, 450 x 250mm size
H RAG, 450 x 450mm size
J RAG, 550 x 250mm size
K RAG, 600 x 450mm size
L RAG, 1050 x 500mm size
M RAG, 750 x 300mm size
Exhaust air grills (EAG) in ducts
A EAG, 300 x 900mm size
B EAG, 400 x 400mm size
C EAG, 750 x 300mm size
D EAG, 900 x 450mm size
E EAG, 1000 x 300mm size
F EAG, 1050 x 450mm size
 PODIUM
233700 - Air Outlets and Inlets
Accessories
Supply and install air outlets and inlets including all connection, fixing,
necessary accessories etc. complete as specified and shown on drawings

Supply Linear Slot Diffuser (SLSD)

A 1 slots, 1000mm long
B 2 slots, 1000mm long
C 2 slots, 2000mm long
D 4 slots, 2000mm long
E 3 slots, 8000mm long
0 Return Linear Slot Diffuser (RLSD)
F 2 slots, 1000mm long
G 2 slots, 2000mm long
0 Supply Ceiling Diffuser
H Size, 225 x 225mm, Ref. SCD
J Size, 300 x 300mm, Ref. SCD
Return Ceiling Diffuser
A Ref. RCD, Size, 225 x 225mm
B Ref. RCD, Size, 300 x 300mm
0 Exhaust Ceiling Diffuser
C Ref. ECD, Size, 150 x 150mm
D Ref. ECD, Size, 225 x 225mm
0 Supply Air Grille
E SAG, 450 x 150mm size
F SAG, 450 x 200mm size
G SAG, 450 x 350mm size
H SAG, 750 x 300mm size
J SAG, 800 x 400mm size
K SAG, 900 x 450mm size
Return Air Grille
A RAG, 450 x 150mm size
B RAG, 450 x 200mm size
C RAG, 450 x 350mm size
D RAG, 600 x 450mm size
E RAG, 750 x 300mm size
TOWER
0 233700 - Air Outlets and Inlets
0 Accessories
0 Supply and install air outlets and inlets including all connection, fixing,
necessary accessories etc. complete as specified and shown on drawings

0 Supply Linear Slot Diffuser (SLSD)

A 1 Slot, 1000m long
B 2 slots, 1000mm long
C 2 slots, 2000mm long
D 2 slots, 3000mm long
E 3 slots, 2000mm long
F 3 slots, 5000mm long
0 Return Linear Slot Diffuser (RLSD)
G 2 slots, 1000mm long
H 2 slots, 2000mm long
J 2 slots, 3000mm long
K 3 slots, 2000m long
L 1 slot, 500mm long
Supply Ceiling Diffuser
A Size, 150 x 150mm, Ref. SCD
B Size, 225 x 225mm, Ref. SCD
C Size, 250 x 250mm, Ref. SCD
D Size, 300 x 300mm, Ref. SCD
E Size, 375 x 375mm, Ref. SCD
F Size, 450 x 450mm, Ref. SCD
0 Return Ceiling Diffuser
G Size, 150 x 150mm, Ref RCD
H Size, 225 x 225mm, Ref. RCD
I Size, 250 x 250mm, Ref. RCD
J Size, 300 x 300mm, Ref. RCD
K Size, 375 x 375mm, Ref. RCD
0 Exhaust Ceiling Diffuser
L Size, 150 x 150 mm, Ref. ECD
Air Louvers
A Fresh air sand trap louver, size 2800 x 2000mm
B Fresh air sand trap louver, size 3500 x 1700mm
C Fresh air sand trap louver, size 3500 x 2000mm
D Extract air louver, size 1500 x 1000mm size
0 Supply Air Grille
E SAG, 450 x 150mm size
F SAG, 500 x 300mm size
G SAG. 550 x 250mm size
H SAG, 750 x 300mm size
I SAG, 800 x 400mm size
J SAG, 200 x 150mm size
K SAG, 300 x 200mm size
L SAG, 500 x 200mm size
M SAG, 750 x 200mm size
N SAG. 1050 x 200mm size
O SAG, 900 x 250mm size
P SAG, 500 x 400mm size
0 Supply Air Register
Q Supply air register single slot, 800 x 400mm size
Return Air Grille
A RAG, 450 x 150mm size
B RAG, 500 x 300mm size
C RAG, 550 x 250mm size
D RAG, 750 x 300mm size
E RAG, 200 x 150mm size
F RAG, 300 x 200mm size
G RAG, 500 x 200mm size
H RAG, 750 x 200mm size
I RAG, 1050 x 200mm size
J RAG, 900 x 250mm size
0 Return Air Register
E Return air register, 1100 x 400mm size
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

3. CATALOGUE COPIES
AND
TECHNICAL DATA SHEET
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

RETURN CEILING DIFFUSER

REMOVABLE & INTERCHANGEABLE CORES WITHOUT
OPPOSED BLADE DAMPER
MODEL: AF704IZ

FILE/JSA/2011
9/11/2018 12:12 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AF704IZ
AF : FLANGE TYPE
704 : FOUR (4) WAY
Z : PAINT

PRODUCT DESCRIPTION

RETURN DIFFUSER, FLUSH MOUNTED WITH SPRING LOADED REMOVABLE AND

INTERCHANGEABLE CORES.

STANDARD CONSTRUCTION

 FRAMES 1.5MM THICKNESS EXTRUDED ALUMINUM ALLOY AA 6063 T6. MILL FINISH
PAINTED
 INNER CORE, 1.2MM THICKNESS EXTRUDED ALUMINUM ALLOY AA 6063 T6. MILL FINISH
PAINTED.
 PAINT, STANDARD FINISH 9016 WHITE AND 9010 OFF WHITE UNDER ELECTROSTATIC
POLYESTER POWDER COATED SYSTEM.
 THE INNER CORE OF THE DIFFUSER IS FULLY REMOVABLE FOR EASY INSTALLATION.

NOTES

 STANDARD SIZES OF ANY COMBINATION OF L X H SHOWN AT THE LEAFLET.

 PATTERN ARRANGEMENTS CODES SEE LEAFLET.
 OTHER SIZES AVAILABLE ON REQUEST

FILEORIGIN/JSA/2011
Contact info: jsa@refhouse.com
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY CEILING DIFFUSER

REMOVABLE & INTERCHANGEABLE CORES WITH OPPOSED
BLADE DAMPER
MODEL
AF704BZ

FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AF704BZ
AF : FLANGE TYPE
704 : FOUR (4) WAY
B : OPPOSED BLADE DAMPER
Z : PAINT

PRODUCT DESCRIPTION

SUPPLY DIFFUSER, FLUSH MOUNTED WITH SPRING LOADED REMOVABLE AND

INTERCHANGEABLE CORES WTH OPPOSED BLADE LEVER-OPERATED DAMPER
ADJUSTABLE FROM THE GRILLE FACE.

STANDARD CONSTRUCTION

 FRAMES 1.5MM THICKNESS EXTRUDED ALUMINUM ALLOY AA 6063 T6. MILL FINISH
PAINTED
 INNER CORE, 1.2MM THICKNESS EXTRUDED ALUMINUM ALLOY AA 6063 T6. MILL
FINISH
PAINTED
 OPPOSED BLADE DAMPER EXTRUDED ALUMINUM ALLOY AA 6063 T6 MILL FINISH.
 PAINT, STANDARD FINISH 9016 WHITE AND 9010 OFF WHITE UNDER ELECTROSTATIC
POLYESTER POWDER COATED SYSTEM.
 THE INNER CORE OF THE DIFFUSER IS FULLY REMOVABLE FOR EASY INSTALLATION.

FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
FILE ORIGIN/JSA/2011
12/15/2011 11:48 AM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY LINEAR SLOT DIFFUSER

20mm SLOT OPENING, WITH DEFLECTOR VANE AND DOUBLE
SIDE HIT-MISS-DAMPER
MODEL:
AG282BDEF7Z

FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG282BDEF7Z
AG : ALUM. FLANGE 28.5MM
282 : 2 SLOTS
B : HIT-AND-MISS DAMPER
D : DEFLECTORS
F7 : FIXING BRACKET
Z : PAINTED

PRODUCT DESCRIPTION

AG 282 SERIES, 2 SLOTS, 20MM SLOT OPENING. WITH TWO DEFLECTORS PER SLOT PROVIDE
AN ADJUSTABLE AIR PATTERN OF FULLY 180O. THE HIT AND MISS DAMPER DOES NOT AFFECT
THE AIR PATTERN AND CAN BE USED AS EQUALIZING GRID. BOTH SIDE END CAPS WITH F7
BRACKET FIXING.

CONSTRUCTION

 OUTER FRAMES AND INNER FRAMES MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063
T6. AS STANDARD
 DEFLECTORS MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063 T6 BLACK MATT 20-
22 MICRON. AS STANDARD.
 HIT AND MISS DAMPER ARE IN GALVANIZED STEEL G-90 WITH MULTIPLE SLOTTED HOLES
AND PAINTED WITH EPOXY SPRAY PAINT ON BOTH SIDES.
 STANDARD FINISH: ELECTROSTATIC POWDER COATED RAL- 9016 WHITE OR RAL- 9010
OFF WHITE.

FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:26 PM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY / RETURN AIR EGISTER

DOUBLE DEFLECTION FRONT HORIZONTAL, REAR VERTICAL
BLADES WITH OPPOSED BLADE DAMPER
MODEL:
AG101BDF3Z

FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG101BDF3Z
AG : FLANGE TYPE 32MM WIDTH
101 : TYPE SERIES
B : OPPOSED BLADE DAMPER
D : DOUBLE DEFLECTION
F3 : SPRING CLIP FIXING
Z : PAINTED

PRODUCT DESCRIPTION

SUPPLY / RETURN AIR EGISTER, INDIVIDUALLY ADJUSTABLE FRONT HORIZONTAL

BLADES AND REAR VERTICAL BLADES WITH OPPOSED BLADE DAMPER ADJUSTABLE
FROM THE GRILLE FACE.

CONSTRUCTION

 FRAMES, BARS AND MULLION IS EXTRUDED ALUMINUM ALLOY AA 6063 T6.

 PAINT, STANDARD FINISH 9016 WHITE AND 9010 OFF WHITE UNDER
ELECTROSTATIC POLYESTER POWDER COATED
 FRAME IS SUPPLIED AS STANDARD WITH PRE – PUNCHED HOLES ALLOWING FOR A
COUNTER SHANK FASTENER HEAD APPEARANCE.
 THE FRAME HAS A TYPICAL WALL THICK OF 1.4MM AND SUPPORTED BY MULLION UP
TO 500MM LENGTH. E ASILY SETTING OF BLADES WITHOUT USE OF ANY SPECIAL
TOOLS.
 OPPOSED BLADE DAMPER IS EXTRUDED ALUMINUM ALLOY AA 6063 T6 MILL
FINISH
 NYLON BUSHES ON BOTH SIDES TO HOLD OVER THE BLADES TO AVOID RATTLING AND
ELIMINATE VIBRATION.
 BLADES ARE DESIGNED INDIVIDUALLY ADJUSTABLE AT SPACED 20MM ON CENTER.

FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
FILE ORIGIN/JSA/2011
12/17/2011 8:45 AM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY LINEAR BAR GRILLE

FIXED BAR GRILLE 0˚ DEFLECTION WITH OPPOSED BLADE DAMPER
MODEL:
AG440BF3Z

FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG440BF3Z
AG : FLANGE TYPE 32MM
440 : SERIES
B : OPPOSED BLADE DAMPER
F3 : CONCEALED FIXING
Z : PAINT

PRODUCT DESCRIPTION

SUPPLY LINEAR BAR GRILLES, Fixed core with reinforcing tube, fixed
horizontal grille bars. 0o deflection. Opposed Blade Damper
adjustable from the grille face.

CONSTRUCTION

 FRAMES, BARS, Extruded Aluminum Alloy AA 6063 T6.

 PAINT, Standard finish 9016 White and 9010 Off White under
electrostatic polyester powder coated system the polyester
powder of highest quality is used to enhance the appearance of
the units.
 FRAME has a typical wall thickness of 1.4mm and mechanically
presses all corners.
 BAR OR BLADES, shall be firmly held in place by aluminum tube
insertion and fixed by crimping press machine at equal distance.
 Opposed Blade damper is Extruded Aluminum Alloy AA 6063 T6.
 BAR, are equal distances of 8mm for an equal air flow distribution.

FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:11 PM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY LINEAR SLOT DIFFUSER

20mm SLOT OPENING, WITH DEFLECTOR VANE AND DOUBLE
SIDE HIT-MISS-DAMPER
MODEL:
AG282BXEF7Z

FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG282BXEF7Z
AG : ALUM. FLANGE 28.5MM
282 : 2 SLOTS
B : HIT-AND-MISS DAMPER
X : WITHOUT DEFLECTORS
F7 : FIXING BRACKET
Z : PAINTED

PRODUCT DESCRIPTION

AG 282 SERIES, 2 SLOTS, 20MM SLOT OPENING. WITH TWO DEFLECTORS PER SLOT PROVIDE
AN ADJUSTABLE AIR PATTERN OF FULLY 180O. THE HIT AND MISS DAMPER DOES NOT AFFECT
THE AIR PATTERN AND CAN BE USED AS EQUALIZING GRID. BOTH SIDE END CAPS WITH F7
BRACKET FIXING.

CONSTRUCTION

 OUTER FRAMES AND INNER FRAMES MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063
T6. AS STANDARD
 DEFLECTORS MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063 T6 BLACK MATT 20-
22 MICRON. AS STANDARD.
 HIT AND MISS DAMPER ARE IN GALVANIZED STEEL G-90 WITH MULTIPLE SLOTTED HOLES
AND PAINTED WITH EPOXY SPRAY PAINT ON BOTH SIDES.
 STANDARD FINISH: ELECTROSTATIC POWDER COATED RAL- 9016 WHITE OR RAL- 9010
OFF WHITE.

FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:31 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG123F3Z
AG : FLANGE TYPE
123 : EGG CRATE GRILL
F3 : CLIP TYPE FIXING
Z : PAINT

PRODUCT DESCRIPTION

SMOKE EXHAUST AIR GRILLE, ALUMINUM EGG CRATE TYPE.

STANDARD CONSTRUCTION

 FRAMES 1.2MM THICKNESS EXTRUDED ALUMINUM ALLOY AA 6063 T6. MILL FINISH
PAINTED
 INNER CORE, ALUMINUM EGG CRATE MILL FINISH 12.5 X 12.5 X 0.5 MM CORE
PAINTED
 PAINT, STANDARD FINISH 9016 WHITE AND 9010 OFF WHITE UNDER ELECTROSTATIC
POLYESTER POWDER COATED SYSTEM.
 FREE AREA 90 PERCENT.

Contact info: amjad@refhouse.com

 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

ROUND CEILING DIFFUSER

RETURN ROUND CEILING DIFFUSER WITH ADJUSTABLE
CONES TO PROVIDE HORIZONTAL AND VERTICAL AIR
PATTERN.
MODEL: AF842Z

FILE/JSA/2010
12/15/2011 12:16 PM
CONTACT INFO: jsa@refhouse.com
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AF842Z
AF : ITEM CODE
842 : TYPE SERIES
Z : PAINTED

PRODUCT DESCRIPTION

RETURN CIRCULAR CEILING DIFFUSER, WITH EXPANDED CONES FEATURE GIVES A

HIGH DEGREE OF MIXING AND PRIMARY AND SECONDARY AIR THAT PROVIDES
EXCELLENT AIR DISTRIBUTION AND EFFICIENCY. WITH ADJUSTABLE CONES TO PROVIDE
HORIZONTAL OR VERTICAL PATTERN. RECOMMENDED FOR HEATING AND COOLING
REMOVABLE CENTER CONES PERMIT EASY INSTALLATION AND ACCESS TO DUCT. UPPER
POSITION OF CENTER CONES GIVES VERTICAL DISCHARGE.

CONSTRUCTION

 ALUMINUM CONSTRUCTION
 STANDARD FINISH 9016 WHITE AND 9010 OFF WHITE UNDER ELECTROSTATIC
POLYESTER
POWDER COATED SYSTEM THE POLYESTER POWDER OF HIGHEST QUALITY IS USED TO
ENHANCE THE APPEARANCE OF THE UNITS.

FILE/JSA/2010
12/15/2011 12:16 PM
CONTACT INFO: jsa@refhouse.com
FILE/JSA/2010
12/15/2011 12:16 PM
CONTACT INFO: jsa@refhouse.com
FILE/JSA/2010
12/15/2011 12:16 PM
CONTACT INFO: jsa@refhouse.com
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

RETURN AIR GRILLE/REGISTER

DOUBLE DEFLECTION, FRONT HORIZONTAL, REAR VERTICAL
BLADES WITHOUT OPPOSED BLADE DAMPER
MODEL:
AG101DZ

FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG101DZ
AG : FLANGE TYPE 32MM WIDTH
101 : TYPE SERIES
D : DOUBLE DEFLECTION
Z : PAINT

PRODUCT DESCRIPTION
RETURN AIR GRILLES AND REGISTER, INDIVIDUALLY ADJUSTABLE FRONT HORIZONTAL
BLADES AND REAR VERTICAL BLADES.

CONSTRUCTION

 FRAMES, BARS AND MULLION IS EXTRUDED ALUMINUM ALLOY AA 6063 T6.

 FRAME IS SUPPLIED AS STANDARD WITH PRE – PUNCHED HOLES ALLOWING FOR A
COUNTER SHANK FASTENER HEAD APPEARANCE.
 THE FRAME HAS A TYPICAL WALL THICKNESS OF 1.4MM AND SUPPORTED BY
MULLION UP TO 500MM LENGTH. EASILY SETTING OF BLADES WITHOUT USE OF ANY
SPECIAL TOOLS.
 NYLON BUSHES ON BOTH SIDES TO HOLD OVER THE BLADES TO AVOID RATTLING AND
ELIMINATE VIBRATION.
 BLADES ARE DESIGNED INDIVIDUALLY ADJUSTABLE AT SPACED 20MM ON CENTER.

NOTES

 STANDARD SIZES OF ANY COMBINATION OF L X H SHOWN AT THE LEAFLET.

 OTHER SIZES AVAILABLE ON REQUEST.

FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
FILE ORIGIN/JSA/2011
12/17/2011 9:19 AM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY LINEAR SLOT DIFFUSER

20mm SLOT OPENING, WITH DEFLECTOR VANE AND DOUBLE
SIDE HIT-MISS-DAMPER
MODEL:
AG281BDEF7Z

AVAILABLE FROM 1 SLOT UP TO 8

SLOTS

FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG281BDEF7Z
AG : ALUM. FLANGE 28.5MM
281 : 1 SLOTS
B : HIT-AND-MISS DAMPER
D : DEFLECTORS
F7 : FIXING BRACKET
Z : PAINTED

PRODUCT DESCRIPTION

AG 281 SERIES, 1 SLOTS, 20MM SLOT OPENING. WITH TWO DEFLECTORS PER SLOT PROVIDE
AN ADJUSTABLE AIR PATTERN OF FULLY 180O. THE HIT AND MISS DAMPER DOES NOT AFFECT
THE AIR PATTERN AND CAN BE USED AS EQUALIZING GRID. BOTH SIDE END CAPS WITH F7
BRACKET FIXING.

CONSTRUCTION

 OUTER FRAMES AND INNER FRAMES MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063
T6. AS STANDARD
 DEFLECTORS MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063 T6 BLACK MATT 20-
22 MICRON. AS STANDARD.
 HIT AND MISS DAMPER ARE IN GALVANIZED STEEL G-90 WITH MULTIPLE SLOTTED HOLES
AND PAINTED WITH EPOXY SPRAY PAINT ON BOTH SIDES.
 STANDARD FINISH: ELECTROSTATIC POWDER COATED RAL- 9016 WHITE OR RAL- 9010
OFF WHITE.

OPTIONS:
AVAILABEL FROM 1SLOT UP TO 8 SLOTS

FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
FILE ORIGIN/JSA/2011
12/17/2011 11:39 AM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY LINEAR SLOT DIFFUSER

20mm SLOT OPENING, WITHOUT DEFLECTOR VANE AND DOUBLE
SIDE HIT-MISS-DAMPER
MODEL:
AG283BXES3Z

FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG283BDES3Z
AG : ALUM. FLANGE 28.5MM
283 : 3 SLOTS
B : HIT-AND-MISS DAMPER
X : WITHOUT DEFLECTORS
S3 : FIXING BRACKET
Z : PAINTED

PRODUCT DESCRIPTION

AG 283 SERIES, 3 SLOTS, 20MM SLOT OPENING. WITH TWO DEFLECTORS PER SLOT PROVIDE
AN ADJUSTABLE AIR PATTERN OF FULLY 180O. THE HIT AND MISS DAMPER DOES NOT AFFECT
THE AIR PATTERN AND CAN BE USED AS EQUALIZING GRID. BOTH SIDE ENDCAPS WITH S3
BRACKET FIXING.

CONSTRUCTION

 OUTER FRAMES AND INNER FRAMES MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063
T6. AS STANDARD
 DEFLECTORS MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063 T6 BLACK MATT 20-
22 MICRON. AS STANDARD.
 HIT AND MISS DAMPER ARE IN GALVANIZED STEEL G-90 WITH MULTIPLE SLOTTED HOLES
AND PAINTED WITH EPOXY SPRAY PAINT ON BOTH SIDES.
 STANDARD FINISH: ELECTROSTATIC POWDER COATED RAL- 9016 WHITE OR RAL- 9010
OFF WHITE.

FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:42 PM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

SUPPLY LINEAR SLOT DIFFUSER

20mm SLOT OPENING, WITH DEFLECTOR VANE AND DOUBLE
SIDE HIT-MISS-DAMPER
MODEL:
AG283BDEF7Z

FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG283BDEF7Z
AG : ALUM. FLANGE 28.5MM
283 : 3 SLOTS
B : HIT-AND-MISS DAMPER
D : DEFLECTORS
F7 : FIXING BRACKET
Z : PAINTED

PRODUCT DESCRIPTION

AG 283 SERIES, 3 SLOTS, 20MM SLOT OPENING. WITH TWO DEFLECTORS PER SLOT PROVIDE
AN ADJUSTABLE AIR PATTERN OF FULLY 180O. THE HIT AND MISS DAMPER DOES NOT AFFECT
THE AIR PATTERN AND CAN BE USED AS EQUALIZING GRID. BOTH SIDE ENDCAPS WITH S3
BRACKET FIXING.

CONSTRUCTION

 OUTER FRAMES AND INNER FRAMES MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063
T6. AS STANDARD
 DEFLECTORS MADE FROM EXTRUDED ALUMINUM ALLOY AA 6063 T6 BLACK MATT 20-
22 MICRON. AS STANDARD.
 HIT AND MISS DAMPER ARE IN GALVANIZED STEEL G-90 WITH MULTIPLE SLOTTED HOLES
AND PAINTED WITH EPOXY SPRAY PAINT ON BOTH SIDES.
 STANDARD FINISH: ELECTROSTATIC POWDER COATED RAL- 9016 WHITE OR RAL- 9010
OFF WHITE.

FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
FILE ORIGIN/JSA/2011
12/17/2011 12:36 PM
 NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

RETURN LINEAR BAR GRILLE

FIXED HORIZONTAL BAR GRILLE 0˚ DEFLECTION WITHOUT OPPOSED
DAMPER
MODEL:
AG440F3Z

FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
 NATIONAL FACTORY
FOR GRILLES AND CENTRAL AIR CONDITIONING FILTER

CUSTOMIZED ITEM CODE

MODEL : AG440F3Z
AG : FLANGE TYPE 32MM WIDTH
440 : 00 DEFLECTION
F3 : SPRING CLIPS FIXING
Z : PAINT

PRODUCT DESCRIPTION

RETURN LINEAR BAR GRILLES, FIXED CORE WITH REINFORCING TUBE, FIXED
HORIZONTAL GRILLE BARS. 0O DEFLECTION.

CONSTRUCTION

 FRAMES, BARS, EXTRUDED ALUMINUM ALLOY AA 6063 T6.

 PAINT, STANDARD FINISH 9016 WHITE AND 9010 OFF WHITE UNDER
ELECTROSTATIC POLYESTER POWDER COATED SYSTEM THE POLYESTER POWDER.
 FRAME HAS A TYPICAL WALL THICKNESS OF 1.4MM AND MECHANICALLY PRESSES
ALL CORNERS.
 BAR OR BLADES, SHALL BE FIRMLY HELD IN PLACE BY ALUMINUM TUBE INSERTION AND
FIXED BY CRIMPING PRESS MACHINE AT EQUAL DISTANCE.
 BAR, ARE EQUAL DISTANCES OF 8MM FOR AN EQUAL AIR FLOW DISTRIBUTION.

NOTES

 STANDARD SIZES OF ANY COMBINATION OF L X H SHOWN AT THE LEAFLET.

 OTHER SIZES AVAILABLE ON REQUEST.

FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
FILE ORIGIN/JSA/2011
12/17/2011 1:15 PM
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

4. COUNTRY OF
ORIGIN CERTIFICATES
 NATIONAL FACTORY
FOR GRILLES & CENTRAL AIR CONDITIONING FILTERS

To whom so ever it mav concern

This is to bring to your kind notice that Country of Origin for National Factory products
are in ffingdom of Saudi Arabia.

National Factory Products are Listed Below.

1. Grilles & Registers. 11. Circular Volume Damper.

2. Linear Slot Diffuser 12_ Access Doors_
S. Linear Bar Grilles. lS. Penthouse.
4. Multi Pattern Perforated ceiling 14_ Plenum Box / Adaptor.
Diffuser. 15_ Back Pressure Relief Damper.
5. Circular Diffusers. 16. Circular Air Valve.
6. Sand Trap Louvers_ 17_ Fire Damper.
7. External Lovers. 18. Sound Attenuator.
8. Diffusers_ 19. Variable Air Volume.
9. Central Air---<.:onditioning Filter. 20. Light Troffers.
10. Volume Control Damper.

Best Regards,
National Factory
For Grilles.& Central Air Conditioning Filters_
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

5. DECLARATION
OF CONFORMITY
 CERTIFICATE OF CONFORMITY

Product :“Grilles, Diffusers and Dampers”

National Factory/Saudi Register for Grilles and Central Air Conditioning Filters” hereby certify that the
products mentioned in above orders has been fabricated in our factory located at 2nd Industrial City,
Dammam. The above product has been fabricated as per National Factory/Saudi Register Standards
and conform to the Specification & Technical Data listed in our product catalogue.

Best Regards,

National Factory
For Grilles & Central Air Conditioning Filters.
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

6. WARRANTY LETTER
 NATIONAL FACTORY
‫المصنع الوطنى لفتحات وفالتر التكييف المركزي‬
FOR GRILLES & CENTRAL AIR CONDITIONING FILTERS

WARRANTY CERTIFICATE

All material supplied by National Factory against the above P.O & Our Job No.
have been manufactured by National Factory and has been inspected.

The mentioned P.O shall be covered by a warranty of 12 Gregorian months starting

from the day of the goods are delivered to the buyer, National Factory confirms the
extension of this warrantee to a maximum of 10 years subject to the conditions
contained within this document.

The Warranty covers Original manufacturing defects with regards and

workmanship, however does not cover the damage direct or implied caused due to
mishandling, improper storage, wrong selection design, improper used/installation
of the goods by the buyer.

The goods should be offloaded and stored in a protected environment, also stored
in a way to avoid mechanical damages; we would require photographic evidence of
the same storage.

All the units to be visibly tagged and photographed upon installation as identified
on the as built drawing, a copy of which to be provided to National Factory on
handover, with a copy of the commissioning report clearly identifying each unit
tag.

All the units to be visibly checked and cleaned on a regular basis as required at any
event and at least once in a year, regular maintenance report with photographs to be
submitted to National Factory.

National Factory shall not liable for damages and delays in shipment or inability to
ship due to condition Which result from acts of fires, wars, sabotage, accidents,
labour disputes, equipments Failure, involuntary compliance with any law, order,
rule or regulation of governmental or Authority.

P.O. BOX 2892, AL KHOBAR 31952, SAUDI ARABIA

C. R. NO. 2050028098 ٠٥٠٥٥٠٢٥٠٢ ‫ت‬.‫س‬
TEL.: (013) 8121282 FAX: (013) 8121280
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

7. PREVIOUS PROJECT
APPROVALS
L

S fl U D I

SAUDI REGISTER

CONSULTANT APPROVALS
 ,.,,-- , ....- '
_r-________tt
-
,r. �f-- IV\'
\

-C>O \..,_)I� r • _JI

P ..-JECTNO.
\1
II - � I c�
PROJECT NAME
1/"� JC'�J\::
�
...Q_,

./
...
KINGDOM OF SAUDI ARAlfill .. t.""' 1 /4/542 CONST.OS:• _ESHOUSI�
MINISTRY OF DEFENSE �
PROJECT lOCATION / CONTRACTOR
JAZAN,KSA / AL JOUOAH CONTRACTING '-
ERAL DIRECTORATE OF MILITARY WOR TRANS. NO. & DATE SUBJECT
� )
"RUCTION DEPARTMENT-JAZAN REGIONAL OFFICE l � MAT•M-029A / 29 DEC 2013 HVAC-:-- n1FFUSERSANO o···--L.
---...-- � -·-
\
ERCNO. PAGE COHTROLCODE
ENGINEERING REVIEW COMMENTS (ERC) ,�, 1 OF2

Jc
(�
DRA'MNG/MATERIAUSUBMJTTAL
DESCRIPTIONS
0 M M E N T s ACTION COOE

PAC GRILLES, OIFFUSERS AND DAMPERS

. �mrnenl5: .
1. l)frHE PROPOSED MANUFACTURER I SUPPLIER, •NATIONAL FACTORY SAUDI REGISTER FOR

,I
GRILLES & CENrRAL AIC FILTERS" AS SHOWN ON l'HE ATTACHED OOCOMENT IS PRE.QUALIFJED
me of Company I SIIPl)lier: NATIONAi.. FACTORY / TO SUPPLY TliE HVAC ACCESSORIES FOR DUC'TWORKS WITH THE FOU.OWiNG REMARKS:
SAUDI REGISlER for ORll.1.ES and CENT� -..._
OONDfflONINO FfLTERS
lress (Jeddah Btandl: P. 0. BOX 91 OS, JEDOAH 21413
iphone : 01216a 2276
1.1.a) TO PROVIDE THE W.TERIAL SCHEDULE FOR EACH ITEM TO BE SUPPLIED IN EACH BUIDING
WHEREVER APPLICABLE; INDlCATE TI-IE PROPOSED MODEL, SIZE, TYPE, OPTIONS, ETC. FOR
n<E SUPPlY CEILING D!FFUSERS, RETURN I EXHAUST DIFFUSERS, LINEAR BAR GRIW:S,
> /'l
�
-
-
:i
,Number :Ot2H1 22165 or01228321N SUPPLY AIR GRlll.ES, SUPPLY AlR REGISTERS, EXHAUST AIR GRJW:S, DOOR GRILl.ES. \
\ AIR INTAKE LOUVERS.EXHAUST LOUVERS, SAND TRAP LOWERS, FIRE DAMPERS, SMOKE
1UfacturillJ Address & Locallon: DAMPERS AND AU 011-IER FITTINGS & APPURTENANCES PER CONTRACT SP!:ClFICA110NS. \ \..
� 101> Abila Slt'Ht 2nd Industrial City Damm1m, KSA \
-·
\
'
1 ti>) TO SUBMIT MATERIAL SAMPLE FOR EACH OF THE PRODUCT ITEM REQUIRED FOR THE PROJECT
itaaPerson : Engr. AmJacl Hammad I FOR VISUAl INSPECTION, COMPARISSON AND EVALUATIONS OF W.TERIAl FINISHES. \
1phon1t : +966 13 812 1282 \
\
,.
Nuniler : +96613 812 1260

"
11 : 1mjad@relhoUM.com: ,(
: hbpl/www.rethouse,00ffl ' I\ ./ I

,��
)sites \.
JCIPUNE ENGINEER'S NAME SIGNATURE _,,av, I � APPR¢!NG AUTHOF h-v / DATE
l
IAtb
I
\.� l
... _.,....,.-,
/
/r1/I \J-"-../'
,1ca1 O
Eng.Erllndo L,..,, -"/,X,/ { /coL ::·.v.. •
1
Ar'�A1a1
r wi7
V,
L
"'-"111 PROJECT ENGINEER ,Pf'RECTOR-9DMW JJ/LAM REGION

�DES: FO ING CODES ARE TO SUBMITTED.

�v i.-
- �
l'MIIEOEXCEPT ,-SHom>O IIMITTm
C: N'PIICM:0, EXCE1'r M HOlU> 0tl SVBYTTBl lrEMflEFER
TO °"TTACIIED ltEEf; tWIIJIIMISSIOH REOOJIIBI. F:
DISAPPROIIED IIU ATTACIIEII 11HEEr
SEE 00'9,IENJ'8 OIIAl'TACHEIO IIIIEET '.
iSUIMSSIOH NOT RE<lURIEI>. D, W1l. BE RETURNED SY A SEPNIATf; OOl'UIESPONOEHCc.. G· RBUANEDwmtOIIT ACn0H
 () (
( t

N.. YNJ,J,,MA COMPANY for Trading & Con1ntcting

• P.O. Box: 2110 Dammam • 31451
SAUDI ARABIA

REQUEST FOR TECHNICAL APPROVAL Date:

ci.Pgnw.JI gSolJI
Saudi Ammco
March lt, :2016
■
•NO OF COPIES ISUBMITTAL CODE

I�
TO: AHMAD II, N.. JAIIIEA CONTRACT NO Ot00033314 3
Senior Proje(:I Engl,-r B.1/J.O.NO.: Bl-to-ot312 0 ARCHITECTURAL
Publc:PlojedDMlk>n PAO.IEICT TtT1..E: TOLINE □ CML
Elcpand llha/nn Comnu,lty ......,__,.,,.._..NQSHH!.z
IIIPM!DIIIWIWI ftlllDafflM.CCWINTY-UTLffY
ITEM D STRUCTURAL
Project OMsloo- lncnlmont 1 LOCATION: DHAHRAN 1QF1 'M D MECHANICAL
OMSION NO. E .ELECTRICAi.
1 0 � OTHERS

REFEREHCE SUBMITTAL NO. CI) NEW SOOWTTAL SPECS.SE!

001-742
c::::J RESUBJ,UTAL YM2- 12111..,
MANUF�CTURER (S) CATALOG/ SPECFICATION

� /.-€ p M *�-� • b)FJo -rwi''P�Y) 1

,< ffSCRIPTION VENOOR(Sj PARAGRAPH/ DRAWING NO

1
ITEMNO COMMEt-lTS

l--+1---(pl ltTAfarNI ....... Gllle811111'--

• le.,"<? .._
IITAfot»r...,._.Oollo _
� RE.CE1
lllodel:
1. Ml101llll'1Z
11:•uwti
Is.,...

�-
Hiving dltcMd thil !SUBMITTED BY: T1111(-)docllmenl(1}na111 been
sutmbl,wecenlfylhlll
l conlonna lo the
...-1or·gene,.iwib1w,ce
wlhllec:onnctauc:h ...ilw­
ID
requl- oflle not ,_.. .,_connc:mtolhll
Conlrlct Doc:umenla In
1------------,-.......-------t

al Atspee:11, exa,ptu
lolhenl4se lndk:lted In Date
the lellar of lrllnlmltlal
I(' .. Ar.A=,..

,o.f• \'111,o/(' 2 8 MAR 3 I'J-% I J-0lh

NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

8. PROPOSED MATERIAL
COMPANY PROFILE
NATIONAL FACTORY
FOR GRILLES AND CAC FILTERS

COMPANY PROFILE

P.O. BOX 2892, AL KHOBAR 31952, SAUDI ARABIA

C. R. NO. 2050028098 ٠٥٠٥٥٠٢٥٠٢ ‫ت‬.‫س‬
TEL.: (013) 8121282 FAX: (013) 8121280
www.refhouse.com

rhadmin@refhouse.com
 NATIONAL FACTORY
SAUDI REGISTER
FOR GRILLES AND
CENTRAL AIR
CONDITIONING FILTERS

COMPANY PROFILE
File/jsa/2010
Contact Info: jsa@refhouse.com
 INTRODUCTION

File/jsa/2010
Contact Info: jsa@refhouse.com
 National Factory for Grilles & CAC Filters
commenced its activities of manufacturing
Air Devices and Filters Since 1979.

File/jsa/2010
Contact Info: jsa@refhouse.com
 National Factory is the first in the Eastern
Province
(Region) who introduced this unique industry
in the field of Air-conditioning especially in the
Gulf Region.

File/jsa/2010
Contact Info: jsa@refhouse.com
National Factory has been making continuous
efforts to cope with the latest requirements of our
devices in order to keep accuracy, efficiency,
quality, best workmanship and great variety in
kind, and numbers of Air-conditioning outlets and
to achieve better standard in the field of Air-
conditioning outlets and to achieve better
standard in the field of Air-conditioning.

File/jsa/2010
Contact Info: jsa@refhouse.com
Our factory is equipped with most
advanced, sophisticated and modern
machines and equipments and has
employed most efficient and highly skilled
technicians and manpower.

File/jsa/2010
Contact Info: jsa@refhouse.com
Due to good quality, better service, fastest
delivery time and with most competitive
prices we have captured vast market in
the entire Gulf region and the middle east.

File/jsa/2010
Contact Info: jsa@refhouse.com
National Factory products are already
exported to various Arabian Gulf Countries
and the Middle East countries.

File/jsa/2010
Contact Info: jsa@refhouse.com
Our goal of accomplishments in
contributing to the building up of modern
countries of Gulf region have placed our
factory at the top and have shown
confidence in our efficiency accuracy
and superb workmanship.

File/jsa/2010
Contact Info: jsa@refhouse.com
 National Factory now has the
capability to manufacture the
following products to cover a
complete range of products for
commercial and industrials air
distributions.

File/jsa/2010
Contact Info: jsa@refhouse.com
 Our Products
Grilles.
Linear Slot Diffuser.
Linear Bar Grilles.
Multi Pattern Perforated ceiling Diffuse.
Circular Diffusers.
Sand Trap Louvers.
External Lovers.
Diffusers.
Central Air-conditioning Filters.
Volume Control Dampers.
Circular Volume Dampers.
Access Doors.
Penthouse.
Plenum Box / Adaptors.
Back Pressure Relief Damper.
Circular Air Valve.
Fire Damper.
Light Troffers.

File/jsa/2010
Contact Info: jsa@refhouse.com
 NATIONAL FACTORY

Head Office
Tel: (03) 882 1713 - 882 3515
Fax: (03) 882 3066

Factory
Tel: (03) 812 1282 Fax: (03) 812
1280
P.O.Box.1823 - Al-Khobar.31952
SAUDI ARABIA
Email:rhadmin@refhouse.com

File/jsa/2010
Contact Info: jsa@refhouse.com
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

9. ISO CERTIFICATES
 This is hereby certified that the Quality Management System of

NATIONAL FACTORY FOR GRILLES & CENTRAL AIR

CONDITIONING FILTERS
2nd Industrial City, Dammam, P.O. Box 2892, Al Khobar 31952, Kingdom of Saudi Arabia

Has been found to comply with the requirements of

ISO 9001:2015
This certificate is applicable for the following scope:
Supply & Return Air Grilles, Linear Slot Diffuser, Linear Bar Grilles, Multi Pattern Ceiling Diffuser,
Perforated Face Ceiling Diffuser, Round Ceiling Diffuser, Sand Trap Louver, Circular Air Valve, Jet Nozzle,
Air Intake or Extract Louvers, Penthouses, Acoustic Louvers, Back Pressure Relief Dampers, Volume
Control Dampers, Fire Dampers (UL Listed), Access Doors, Plenum Box / Adopters, Sound Attenuator,
VAV (AHRI Certified), CAV, Motorized Fire & Smoke Damper, Motorized Fire Damper (UL Listed).

Certificate Number: KAQM202412033

Date of Initial Registration: 01 September 2023

Date of this Certificate: 13 December 2024
Surveillance audit on/before: 01 August 2025
Certificate expiry: 01 September 2025
Recertification due: 31 August 2026
MANAGEMENT SYSTEM CERTIFICATE

Website: www.iso-registration.com | Email: info@iso-registration.com

KVQA Assessment Private Limited is accredited to United Accreditation Foundation (UAF). UAF is internationally recognized by having
a signatory status across multilateral recognition arrangement of International Accreditation Forum (IAF) and Asia Pacific Accreditation
Cooperation (APAC).

The certificate is valid subject to successful completion of surveillance audits. Verify validity/status on www.iso-registration.com or on
email at info@iso-registration.com

UAF address: 1060 Laskin Road, STE 12B/13B, Virginia Beach, VA 23451, United States of America
10. LOCAL SUPPLIER
COMPANY PROFILE
N/A
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

11. TRADE LICENSE

 ‫رﻣﺰك اﻟﺘﺠﺎري ‪QR Code‬‬
‫ﻣﻦ ﺧﻼﻟﻪ ﻳﻤﻜﻨﻚ اﻟﺘﺤﻘﻖ اﻟﻤﺒﺎﺷﺮ ﻣﻦ اﻟﻌﻠﻮﻣﺎت‪:‬‬

‫رﺧﺼﺔ اﻟﺒﻠﺪﻳﺔ‬ ‫اﻟﺴﺠﻞ اﻟﺘﺠﺎري‬

‫ﺑﺮﻧﺎﻣﺞ ﻧﻄﺎﻗﺎت‬ ‫ﺷﻬﺎدة اﻟﺴﻌﻮدة‬

‫اﻟﻐﺮﻓﺔ اﻟﺘﺠﺎرﻳﺔ‬ ‫ﺷﻬﺎدة اﻟﺰﻛﺎة‬

‫‪MCgovSA‬‬
‫‪www.mc.gov.sa‬‬
 ̀˹˺˺̀˾˾˾˺˽
˻˹˾˹˹˻́˹̂́
˰ϫ˺˽˺˾˹˺˹˽

ΔϠϔϘϣΔϣϫΎγϣΕϻϭΎϘϣϠϟΩϳέΑΗϟ΍ΕϳΑΔϛέη

ϱΩϭόγ்˺˻က˾˹˹က˹˹˹ ΔϣϫΎ˰˰˰˰˰˰˰˰˰˰γϣ
ΩϬϓϥΑϝλϳϓέϳϣϷ΍ωέΎηέΑΧϟ΍

˹˹˺́˻˼ ˼˺̂˾˻ ˹˺˼́́˻˼˾˺˾

έΑΧϟ΍ ˰ϫ˺˼̂̂˹˽˺˾ ˻˹˾˺˹˹˽˾˽˺

ϱίϛέϣϟ΍ϑϳϳϛΗϟ΍έΗϼϓϭΕΎΣΗϔϟϲϧρϭϟ΍ϊϧλϣϟ΍

ϪϳϧΎΛϟ΍ϪϳϋΎϧλϟ΍ϪϘρϧϣϟ΍ϡΎϣΩϟ΍

́˺˻˺́˽́
ϱέΎΟΗϟ΍ίϣέϟ΍΢γϣ˯ΎΟέϟ΍ΔρηϧϷ΍ΕΎϧΎϳΑϰϠϋωϼρϼϟ

ϑϠΧϟ΍ϝΑϘϣ΢ϟΎλϰϠϋ

ϱΩϭόγϟ΍ΔϳΑέόϟ΍ ˰ϫ˺˼˿˹ ϯΩϭό˰˰˰˰γ

έΑΧϟ΍ϝ΍ϭΣ΃ ˰ϫ˺˽˼˻˹˻˹˿ ˺˹˻́˽̂̀̂́́

Δϛέηϟ΍ΩϘϋϪϳϠϋιϧΎϣΏγΣ

ϡΎϣΩϟ΍ ϡΎϣΩϟ΍

˰ϫ˺˽˽˾˺˻˺́ ˻˽˹˿˺˻˿˹˼˹˼́ ˰ϫ˺˽˽́˹˺˺̂

 ͷ௜̹௛̻̺͙ͮ௬௬̹௪̺͙௛̴̘͇͵̜̓͜௪̵̺̼́ͩ͵̢̺͙̰̼̻̺͙

̨̨̨̧̪̣̤̤̪̤

̨̨̥̥̣̣̬̤̩ ̨̥̣̣̣̥̫̣̬̫

̨̧̨̥̪ ̧̧̤̬̩̫̬

͓͙௛͙̜̘͆̚͜
̚͡͵̀͆

̧̦̤̣̤̥̣̦̩̫
 ‫ﺍﻟﺘﺎﺭﻳـــــــــﺦ‪19/11/2024 :‬‬
‫ﺍﻟﻤﻮﺍﻓـــــــﻖ‪1446/05/17 :‬‬
‫ﺭﻣﺰ ﺍﻟﺸﻬﺎﺩﺓ‪82005915 :‬‬

‫ﺷﻬﺎﺩﺓ‬

‫ﺍﻟﻤﺼﻨﻊ ﺍﻟﻮﻃﻨﻲ ﻟﻔﺘﺤﺎﺕ ﻭﻓﻼﺗﺮ ﺍﻟﺘﻜﻴﻴﻒ ﺍﻟﻤﺮﻛﺰﻱ‬ ‫ﺍﺳﻢ ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪522005916‬‬ ‫ﺍﺳﻢ ﺻﺎﺣﺐ ﺍﻟﻌﻤﻞ‬

‫‪٢٠٥٠٠٢٨٠٩٨‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬ ‫‪٥٢٢٠٠٥٩١٦‬‬ ‫ﺭﻗﻢ ﺍﻻﺷﺘﺮﺍﻙ‬

‫ﺍﻟﺨﺒﺮ ﺍﻟﺴﻌﻮﺩﻳﺔ ‪1823 34334‬‬ ‫ﺍﻟﻌﻨﻮﺍﻥ‬

‫ﺍﻟﻤﺠﻤﻮﻉ‬ ‫ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﻏﻴﺮ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ‬ ‫ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ‬

‫‪117‬‬ ‫‪86‬‬ ‫‪31‬‬ ‫ﺭﻗﻤﺎ‬

‫ﻣـﺎﺋﺔ ﻭ ﺳﺒﻌﺔ‬ ‫ﺳﺘﺔ ﻭ ﺛﻤﺎﻧﻮﻥ ﻣﺸﺘﺮﻛﺎ‬ ‫ﻭﺍﺣﺪ ﻭ ﺛﻼﺛﻮﻥ ﻣﺸﺘﺮﻛﺎ‬ ‫ﻛﺘﺎﺑﺔ‬

‫ﻋﺸﺮﻩ ﻣﺸﺘﺮﻛﺎ‬

‫ﺗﺸﻬﺪ ﺍﻟﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺃﻋﻼﻩ ﻗﺪ ﺃﻭﻓﺖ ﺑﺎﻟﺘﺰﺍﻣﺎﺗﻬﺎ ﺗﺠﺎﻩ‬
‫ﺍﻟﻤﺆﺳﺴﺔ ﻭﻓﻖ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻤﻘﺪﻣﺔ ﻣﻨﻬﺎ ﺣﺘﻰ ﺗﺎﺭﻳﺦ ﺍﺻﺪﺍﺭ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ‪ ،‬ﻭﺍﻟﺘﻲ ﺗﻢ ﻣﻨﺤﻬﺎ ﻟﺘﻘﺪﻳﻤﻪ ﻷﻳﺔ ﺟﻬﺔ‬
‫ﺗﻄﻠﺒﻬﺎ‪ ،‬ﻭﻫﻲ ﺻﺎﻟﺤﺔ ﻟﺠﻤﻴﻊ ﺍﻷﻏﺮﺍﺽ ﺍﻟﺘﻲ ﻧﺺ ﻋﻠﻴﻬﺎ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﻓﻲ ﺍﻟﻤﺎﺩﺓ‬
‫)‪ (١٩/٦‬ﻣﻨﻪ‪.‬‬

‫ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﺳﺎﺭﻳﺔ ﺍﻟﻤﻔﻌﻮﻝ ﺣﺘﻰ ‪ 1446/06/17‬ﻫـ‪.‬‬

‫‪ Public‬ﻋﺎﻡ‬
‫ﺍﻟﺸﻬﺎﺩﺓ ﻣﻌﺘﻤﺪﺓ ﻣﻦ ﺻﺎﺣﺐ ﺍﻟﺼﻼﺣﻴﺔ ﻭﻻ ﺗﺤﺘﺎﺝ ﻟﺘﻮﻗﻴﻊ ﺃﻭ ﺧﺘﻢ‬

‫ﺗﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﻭﺻﻼﺣﻴﺔ ﺍﻟﺸﻬﺎﺩﺓ ﻋﺒﺮ ﺯﻳﺎﺭﺓ ﺍﻟﺮﺍﺑﻂ ﺃﺩﻧﺎﻩ ﻓﻲ ﺍﻟﻤﻮﻗﻊ ﺍﻻﻟﻜﺘﺮﻭﻧﻲ ﻟﻠﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ‬
‫ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﺍﻭ ﻋﻦ ﻃﺮﻳﻖ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﺮﻣﺰ ﺍﻟﻤﻌﺮﻑ ﺍﻟﺘﺎﻟﻲ‬
 ‫ﺍﻟﺘﺎﺭﻳـــــــــﺦ‪1446/05/17 :‬‬
‫ﺍﻟﻤﻮﺍﻓـــــــﻖ‪2024/11/19 :‬‬
‫ﺭﻣﺰ ﺍﻟﺸﻬﺎﺩﺓ‪82006213 :‬‬

‫ﺑﻴﺎﻥ ﺑﺎﻷﺟﻮﺭ ﻭﺍﻻﺷﺘﺮﺍﻛﺎﺕ‬

‫ﺍﻟﻤﺼﻨﻊ ﺍﻟﻮﻃﻨﻲ ﻟﻔﺘﺤﺎﺕ‬ ‫ﺍﺳﻢ ﺍﻟﻤﻨﺸﺄﺓ ‪/‬‬

‫‪7011755514‬‬ ‫ﺍﻟﺮﻗﻢ ﺍﻟﻮﻃﻨﻲ ﺍﻟﻤﻮﺣﺪ‬
‫ﻭﻓﻼﺗﺮ ﺍﻟﺘﻜﻴﻴﻒ ﺍﻟﻤﺮﻛﺰﻱ‬ ‫ﺍﻟﺠﻬﺔ‬
‫‪7845‬‬
‫ﺭﻗﻢ ﺍﺷﺘﺮﺍﻙ‬
‫ﺍﻟﺨﺒﺮ ‪1 ,‬‬ ‫ﻋﻨﻮﺍﻥ ﺍﻟﻤﻨﺸﺄﺓ‬ ‫‪522005916‬‬
‫ﺍﻟﻤﻨﺸﺄﺓ‬
‫‪34334 , 3210‬‬

‫ﺍﻟﻔﺘﺮﺓ ﺍﻟﺘﻲ ﺗﺸﻤﻠﻬﺎ ﺷﻬﺎﺩﺓ ﺍﻟﺰﻛﺎﺓ ﻭﺍﻟﺪﺧﻞ ) ‪ 2024/01/01‬ﻡ ( ﺇﻟﻰ ) ‪ 2024/11/30‬ﻡ (‪.‬‬

‫ﺍﺟﻤﺎﻟﻲ ﺍﻷﺟﻮﺭ ﺍﻟﺨﺎﺿﻌﺔ ﻟﻼﺷﺘﺮﺍﻙ‬ ‫ﺍﺟﻤﺎﻟﻲ ﺍﻷﺟﻮﺭ ﺍﻟﺨﺎﺿﻌﺔ ﻟﻼﺷﺘﺮﺍﻙ‬

‫ﻟﻠﻤﺸﺘﺮﻛﻴﻦ ﻏﻴﺮ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ‬ ‫ﻟﻠﻤﺸﺘﺮﻛﻴﻦ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ‬

‫ﺭ‪.‬ﺱ‪2,791,046.70‬‬ ‫ﺭ‪.‬ﺱ ‪2,509,083.50‬‬

‫ﻣﻘﺪﺍﺭ ﻏﺮﺍﻣﺎﺕ ﺍﻟﺘﺄﺧﻴﺮ ﺍﻟﻤﺴﺪﺩﺓ ﻟﻠﻤﺆﺳﺴﺔ‬ ‫ﻣﻘﺪﺍﺭ ﺍﻻﺷﺘﺮﺍﻛﺎﺕ ﺍﻟﻤﺴﺪﺩﺓ ﻟﻠﻤﺆﺳﺴﺔ‬

‫ﺭ‪.‬ﺱ‪22.32‬‬ ‫ﺭ‪.‬ﺱ‪539,067.46‬‬

‫ﺻﺪﺭ ﻫﺬﺍ ﺍﻟﺒﻴﺎﻥ ﺑﻨﺎﺀ ﻋﻠﻰ ﻃﻠﺐ ﺍﻟﻤﻨﺸﺄﺓ‪ ،‬ﻭﻃﺒﻘﺎ ﻟﻠﻤﻌﻠﻮﻣﺎﺕ ﻭﺍﻟﻤﺴﺘﻨﺪﺍﺕ ﺍﻟﻤﻘﺪﻣﺔ ﻣﻨﻬﺎ ﺧﻼﻝ ﺍﻟﻔﺘﺮﺓ‬
‫ﺍﻟﻤﺬﻛﻮﺭﺓ ﻭﻳﻘﺼﺮ ﺍﺳﺘﺨﺪﺍﻣﻪ ﻋﻠﻰ ﻫﻴﺌﺔ ﺍﻟﺰﻛﺎﺓ ﻭﺍﻟﻀﺮﻳﺒﺔ ﻭﺍﻟﺠﻤﺎﺭﻙ ﻓﻘﻂ‪ ،‬ﻭﻻ ﻳﻤﺜﻞ ﺷﻬﺎﺩﺓ ﻭﻓﺎﺀ ﺑﺎﻟﺘﺰﺍﻣﺎﺕ‬
‫ﺍﻟﻤﻨﺸﺄﺓ ﺗﺠﺎﻩ ﺍﻟﻤﺆﺳﺴﺔ‪.‬‬

‫)ﺍﻟﺒﻴﺎﻥ ﻣﻌﺘﻤﺪ ﻣﻦ ﺻﺎﺣﺐ ﺍﻟﺼﻼﺣﻴﺔ ﻭﻻ ﻳﺤﺘﺎﺝ ﺇﻟﻰ ﺗﻮﻗﻴﻊ ﺃﻭ ﺧﺘﻢ(‬

‫‪ #‬ﺍﻻﺷﺘﺮﺍﻛﺎﺕ ﺍﻟﻤﺴﺠﻠﺔ ﻓﻲ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﻫﻲ ﺇﺟﻤﺎﻟﻲ ﺍﻻﺷﺘﺮﺍﻛﺎﺕ ﺍﻟﻤﺴﺪﺩﺓ ﻣﻦ ﺻﺎﺣﺐ ﺍﻟﻌﻤﻞ‬

‫ﻭﺗﺸﻤﻞ ﺣﺼﺔ ﺻﺎﺣﺐ ﺍﻟﻌﻤﻞ ﻭﺣﺼﺔ ﺍﻟﻤﺸﺘﺮﻙ‪.‬‬

‫‪ #‬ﺍﻻﺷﺘﺮﺍﻛﺎﺕ ﺍﻟﻤﺴﺠﻠﺔ ﻓﻲ ﻫﺬﺍ ﺍﻟﺒﻴﺎﻥ ﻫﻲ ﺇﺟﻤﺎﻟﻲ ﺍﻻﺷﺘﺮﺍﻛﺎﺕ ﺍﻟﻤﺴﺪﺩﺓ ﻣﻦ ﺻﺎﺣﺐ ﺍﻟﻌﻤﻞ‬

‫ﻟﻠﻤﻨﺸﺄﺓ ﺍﻟﺮﺋﻴﺴﻴﺔ ﻭ ﺟﻤﻴﻊ ﻓﺮﻭﻋﻬﺎ‪.‬‬

‫‪ Public‬ﻋﺎﻡ‬

‫ﺗﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﻭﺻﻼﺣﻴﺔ ﺍﻟﺸﻬﺎﺩﺓ ﻋﺒﺮ ﺯﻳﺎﺭﺓ ﺍﻟﺮﺍﺑﻂ ﺃﺩﻧﺎﻩ ﻓﻲ ﺍﻟﻤﻮﻗﻊ ﺍﻻﻟﻜﺘﺮﻭﻧﻲ ﻟﻠﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ‬
‫ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﺍﻭ ﻋﻦ ﻃﺮﻳﻖ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﺮﻣﺰ ﺍﻟﻤﻌﺮﻑ ﺍﻟﺘﺎﻟﻲ‬
 ‫شهادة الت وطين‬
‫ت اري خ ان ت هاء الصلاحي ة‬ ‫ت اري خ الإ صدار‬ ‫رق م الش هادة‬
‫‪17/02/2025‬‬ ‫‪21/02/2024‬‬ ‫‪135309-10853129‬‬

‫‪19/11/2024‬‬ ‫ت اري خ الت ج دي د‪/‬الت حدي ث‬

‫ت م الت حقق‬ ‫حالة الش هادة‬

‫المركز ي‬ ‫المصن ع الوطن ي لف ت حات وف لات ر الت كي ي ف‬ ‫اسم المن شأ ة‬

‫‪4-1500167‬‬ ‫رق م المن شأ ة‬

‫‪2050028098‬‬ ‫رق م السج ل الت ج اري‬

‫‪7011755514‬‬ ‫الرق م الوطن ي الموحد‬

‫اخ ض ر مت وسط‬ ‫مست وى ن طاق ات‬

‫‪% 28‬‬ ‫معدل الت وطي ن‬

‫‪The Ministry of Human Resources and Social Development certifies that‬‬ ‫تش هد وز ارة الموارد الب ش ري ة والت ن مي ة الاج ت ماعي ة ب أ ن المن ش أ ة‬
‫‪the above mentioned Establishment has achieved the required‬‬ ‫المذ كورة أ علاه حق ق ت ن سب ة الت وطي ن المطلوب ة وت م من حها‬
‫‪Nationalization rate and has been granted this certificate upon request.‬‬ ‫هذه الش هادة ب ناء عن طلب ها‪.‬‬

‫‪The certificate is electronically generated and approved by the‬‬ ‫الش هادة ت م إ ن ش اؤ ها إ لكت رون ي ًا ومعت مدة من الج هة‬
‫‪authority. It does not require any signature or stamp.‬‬ ‫المخ ت صة ولا ت حت اج الى خ ت م او ت وق ي ع‬
12. AGENCY LETTER
N/A
NATIONAL FACTORY / SAUDI REGISTER
For Grilles & Central Air Conditioning Filters

13. PROJECT REFERENCES

23 – 5 similar project references for Manufacturer.
Sn. Projects Name Contractor
1 Jabal Al – Kabah MEC- Mathaher El – Tayweer for Contracting
2 Movenpik Hotel Project Al- Khobar MEC- Mathaher El – Tayweer for Contracting
3 Petro Rabigh Jeddah A.A Turki Group of Companies
4 Office Park Al-Khafji-8446 Al-Hashim Airconditioning Co. Ltd.
5 Al-Rashid Mall Khobar Al-Salima A/c
6 PFB 8449-Pension Fund Building Saudi Oger Limited
7 Khuraiz Industrial Complex A.A Turki Group of Companies
8 NCB-Riyadh Nesma National Engineering Services
9 Bisha Airport Nesma National Engineering Services
10 Al-Raiji Bank Nawasi Est. Trading & Contracting
11 Dabal Compound Abdul Aziz Fahad Al-Mulhim
12 Meridian Tower E.A Juffali & Brothers
13 Al-Farsi Tower Akwan Contracting
14 Jamarat Projects Rowat Al-Wadi
15 Ibnu Sina Medical College Marine Services
16 North Park Office Yamama Tradinf Company
Medical OR/Css & Laboratory Bldg.62
17 Baseelah Mechanical Works
Dhahran ARAMCO
18 Hadeed Project I & II-Jubail Nesma Emcor
19 Prince Waled Bin Talal Palace Khalid Bakhashween Est.
20 Taiba-111 Madinah Saudi E.T.A Ltd.
21 Emara Madinah Abbar & Zainy
22 Diplomatic Quarters Saudi Technical Limited
23 King Abdul Aziz Historical Museum Saudi Technical Limited
24 Takhassusi Palace Saudi Binladin PBAD
25 Military Hospital Saudi Binladin PBAD
26 GOSI Housing at Diplomatic Quarters Saudi Ensas Company