Scribd
Upload
48 views1 page

Service Information: Cover Assembly Versions MFZ 430 & MFZ 2 / 400 With Preassembled Releaser

The document provides service information for the cover assembly of versions MFZ 430 & MFZ 2 / 400, highlighting the importance of the correct positioning of guide pins in the releaser to prevent premature failure. It emphasizes that improper handling or transportation can lead to misalignment, which affects operation. Prior to installation, it is crucial to verify the correct position of the releaser to avoid damage.

Uploaded by

Brahim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

Service Information: Cover Assembly Versions MFZ 430 & MFZ 2 / 400 With Preassembled Releaser

The document provides service information for the cover assembly of versions MFZ 430 & MFZ 2 / 400, highlighting the importance of the correct positioning of guide pins in the releaser to prevent premature failure. It emphasizes that improper handling or transportation can lead to misalignment, which affects operation. Prior to installation, it is crucial to verify the correct position of the releaser to avoid damage.

Uploaded by

Brahim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Service Information

Cover assembly
Versions MFZ 430 & MFZ 2 / 400
with preassembled releaser
3483 … / 3488 …

Fig. 1: Guide pin of release ring in its correct position Fig. 2: Guide pin of release ring incorrectly seated -The pin
slipped under the diaphragm spring

The correct position of the guide pins (Fig. 1) is between the recesses of the diaphragm spring tips.
If one of these guide pins slips under the diaphragm spring tips due to improper handling / incorrect
transportation eccentric / awry releaser contact will occur and inevitably cause premature failure.
Any shock during transportation or handling prior to installation can force the releaser out of its centered
position. This position is needed to ensure correct operation (Fig. 2).

Make sure to verify the correct position of the releaser prior to installation to avoid such damage.

www.aftermarket.zf.com/serviceinformation

ZF Friedrichshafen AG ▪ ZF Aftermarket © ZF Friedrichshafen AG Printed in Germany


Obere Weiden 12, 97424 Schweinfurt, Germany 12268 EN
Technical Support Phone: +49 9721 4755555 04.2006
Fax: +49 9721 4755556
www.aftermarket.zf.com/contact 1/1

You might also like