Scaffolding used in Construction
Definition
Scaffolding is a temporary structure to support the original structure as well as workmen
used it as a platform to carry on the construction works. Types of scaffolding varies with
the type of construction work. Scaffolding is made up of timber or steel. It should be stable
and strong to support workmen and other construction material placed on it.
Types of Scaffolding used in Construction:
Following are types of Scaffolding in construction:
1. Single scaffolding
2. Double scaffolding
3. Cantilever scaffolding
4. Suspended scaffolding
5. Trestle scaffolding
6. Steel scaffolding
7. Patented scaffolding
1. Single Scaffolding
Single scaffolding is generally used for brick masonry and is also called as brick layer’s
scaffolding. Single scaffolding consists of standards, ledgers, putlogs etc., which is parallel
to the wall at a distance of about 1.2 m. Distance between the standards is about 2 to 2.5 m.
Ledgers connect the standards at vertical interval of 1.2 to 1.5 m. Putlogs are taken out
from the hole left in the wall to one end of the ledgers. Putlogs are placed at an interval of
1.2 to 1.5 m. This is also known as a “dependent scaffolding”
2. Double Scaffolding
Double Scaffolding is generally used for stone masonry so, it is also called as mason’s
scaffolding. In stone walls, it is hard to make holes in the wall to support putlogs. So, two
rows of scaffolding is constructed to make it strong. The first row is 20 – 30 cm away from
the wall and the other one is 1m away from the first row. Then putlogs are placed which
are supported by the both frames. To make it more strong rakers and cross braces are
provided. This is also called as independent scaffolding.
3. Cantilever Scaffolding
This a type of scaffolding in which the standards are supported on series of needles and
these needles are taken out through holes in the wall. This is called single frame type
scaffolding. In the other type needles are strutted inside the floors through the openings
and this is called independent or double frame type scaffolding. Care should be taken while
construction of cantilever scaffolding.
Generally cantilever scaffoldings are used under conditions such as
• When the ground does not having the capacity to support standards,
• When the Ground near the wall is to be free from traffic,
• When upper part of the wall is under construction.
4. Suspended Scaffolding
In suspended scaffolding, the working platform is suspended from roofs with the help of
wire ropes or chains etc., it can be raised or lowered to our required level. This type of
scaffolding is used for repair works, pointing, paintings etc..
5. Trestle Scaffolding
In Trestle scaffolding, the working platform is supported on movable tripods or ladders.
This is generally used for work inside the room, such as paintings, repairs etc., up to a
height of 5m.
6. Steel Scaffolding
Steel scaffolding is constructed by steel tubes which are fixed together by steel couplers or
fittings. It is very easy to construct or dismantle. It has greater strength, greater durability
and higher fire resistance. It is not economical but will give more safety for workers. So, it
is used extensively nowadays.
7. Patented Scaffolding
Patented scaffoldings are made up of steel but these are equipped with special couplings
and frames etc., these are readymade scaffoldings which are available in the market. In this
type of scaffolding working platform is arranged on brackets which can be adjustable to
our required level.
