Full Automatic Washing Machine User's manual

This manual is for

HWM60-10

Please read this manual

carefully before using.
Retain it for future reference. 0030807260
Downloaded from www.Manualslib.com manuals search engine
 Contents

Names of the parts................................................1

Safety precautions ...............................................2
Installation and adjustment ..................................4
Install the water inlet hose....................................6
Preparation before washing ................................7
Put in the laundries ..............................................8
Put in the detergent ..............................................9
Use the operation buttons ...................................10
Close the top lid ...................................................14
Finish washing .....................................................15
Disposal after washing .........................................15
Trouble shooting Answer to question................16
Packing list ...........................................................17
Specifications...........................................back cover

Downloaded from www.Manualslib.com manuals search engine

 Names of the parts Before Using

Top lid B Top lid A Sop mat water valve

Detergent box Cabinet handle
Lint filter(Installed by user) Drain hose

Control panel

Filter cover
Power line
Inner tub

Control panel
film
Pulsator

back cover
Cabinet
fixed foot (3)
base frame Adjustable foot

Accessories

Bottom plate
(one) Meaning and description of the symbols
Contents marked with that symbol
The end connecting Warning sign are related to the safety of the
to the washing machine product and the personal safety
The end connection water inlet hose of the users. Please operate in
to the water inlet (one) strict conformity to the contents,
hose otherwise it may cause damage
of the machine or injure the
personal safety of the user.

tapping screws Forbidden sign Contents marked with that symbol

ST4X16 are actions forbidden to perform.
(eight) Performing of those actions may
result in damage of the machine
Lint filter or injure the personal safety of
(two) the user.

Downloaded from www.Manualslib.com manuals search engine

 Safety precautions Before Using
Please plug the plug on special 220V AC The power cord plug should be convenient
receptacle.Please guarantee that the to be pluged in or pluged out with hand
earthing wire is ear-thed reliably. while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving the machine,or when cleaning
the machine.Do not use wet hand to ins-
ert or pull out the power plug.
earth

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.

Keep the pin of the power plug clean,if the power plug is polluted with dust,
please wipe with dry cloth carefully.

Do not put the machine at damp place like Do not use water hotter above 50 C .
the bathroom. Never wash it with water.
Do Not put wet laundries on the control panel.

In case the washing machine is installed on ground with Do not wash water-proof laundries like the raincoat,
carpet, do not block the ventilation hole with carpet. bike covers etc. to avoid abnormal vibrations in spinning.
The ventilation holes
at the bottom

soft items

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.

Downloaded from www.Manualslib.com manuals search engine

 Before Using
Do not stretch hands into the working
machine. It is dangerous even if the Do not decompose, repair or alter the
rotation is slow. Take special care of machine by yourself.
the children.Do not let the children
climb the washing machine.

Do not put any hot or heavy items (such Do not wash laundries with volatile
as the kettle with hot water ) on the materials (such as thinner, petrol etc.)
washing machine.
l
Petro Thinner

The handicapped or children without Keep the machine away from direct
care shall not use the machine. sunlight and heat source like the heater.

To prevent your laundries and washing

.
machine from damage,be sure to take To prevent the lint in the tub from blocking
out all of the foreign materials from your the cascade outlet and influencing the
pocket,such as coins,buttons,sand or cascade effect, please keep the lint filter
hairpins etc. in good condition, and install it to proper
position during washing.

Before washing,please check if the water

tap is open ,and if the water inlet pipe is
connected properly.
It is suggested to use low-foaming was-
hing powder

Downloaded from www.Manualslib.com manuals search engine

 Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.

Install the lint filter Install the bottom plate

After you open the package,
1.Press downward to assmble.
2.Pull upward to detach. please lean the washing Back
machine gently down on soft
items ( like the towel cloth, Front

blanket, etc. ). Install the

Soft items
bottom plate to the bottom of
the machine with the eight
screws by a cross screwdriver, Screw
Put down Bottom plate
Put up
Put up
then lift the machine up gently.
Put down
See to the figure:

Adjust the installation position

The largest allowed slope of the

shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:

Adjust the adjustable foot:

1.To twist the adjustable foot, please
first lift up the side of the foot slightly, adjustable nut
loosen the adjustable nut, and twist Loosen Fasten
the foot. adjustable foot
2.Fasten the nut after adjustment. High Low

Downloaded from www.Manualslib.com manuals search engine

 Before Using
How to change the direction of the drain hose

1.Lean the machine down gently with the 3.Extend the drain hose from the left side.
front surface facing the ground. Loosen Push the drain hose into the groove with
the eight screws by a cross screwdriver. hands.

Back Bottom plate

Front
Push the drain hose
Soft item into the groove with
hands at this point
2.Pull out the drain hose from the groove at the
right side.

4.Install the bottom plate (as per indicated

before), then lift the machine up gently.
Use groove at
Page 4
this side after
direction changing

Usage of the drain hose

The drain hose shall drain smoothly
1.The height of the drain hose shall be 4.If extra drain hose is needed, please
less than 10cm, or the drainage will not make separate purchase. The inner
be smooth, and cost such long time that diameter of the extra hose shall not
the machine may stop at mid way. less than 30mm, and the length shall
2.Do not trample or press the drain hose. not exceed 1.5m.

If the drain hose is too long, cut it at mid 5.If the extra hose is too long,
point. To make smooth drainage, cut the cut it either at A or at B point.
front end of the hose slantingly.

Downloaded from www.Manualslib.com manuals search engine

 Install the water inlet hose Before Using
Install the water inlet hose
1. Insert a new flat washer into each end of the inlet hoses. Firmly put the
washers in the coupling.
Note:
Use the new hose sets supplied with the washer.
Any other old hose sets should not be used.
You may have to use pliers to tighten the coupling.
Do not over tighten because you may cause
damage to the valve.
2. Connect the water inlet hoses to the water faucet.
3. Connect the other ends to their respective cold and hot water inlet valve
located at the rear of the washer
Nut of the water inlet hose

Water absorption cushion

Jointer of the water inlet valve
4.Fasten the nut. Swing it gently to confirm if it's suitable.

Check the connection between the water inlet

hose and the water tap
1.Swaying the hose gently to confirm if it is
fastened stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap,
and the connection between the water inlet hose
and washer are firm, so as to prevent dropping
from improve Installation position.

Take down the water inlet hose

1.Close the water tap.

2. Pull off the water inlet hose from the water tap
and washer

Downloaded from www.Manualslib.com manuals search engine

 1 Preparation before washing Using process

Preparation before washing

1.Connect the water inlet hose and open
the water tap .
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the drain hose.

Pay attention to followings before washing the laundries

Confirm if Clear the pocket. Fasten the The quantity of When the pulsator
there's special Take out the buttons and the laundries is running , the
requirment for coins , sand, zippers. shall not exceed buttons of the
the laundries. hairpins etc. the rated value. laundries may
The big laundries cause noise. For
like the jeans the sake of
shall be put in discretion,please
loosely. put the laundries
with buttons into
other laundries.

A. Check if the laundries are applicable for washing with machine.

b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.
For the parts with heavy soil, please apply detergent on them in advance, which
can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before
putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.

Downloaded from www.Manualslib.com manuals search engine

 2 Put in the laundries Using process
The capacity of washing and spinning of
the machine refer to the largest weight of
the standard laundries under dry condition
that can be washed or spinned in one time.
One time washing quantity shall be lower
than the rated capacity. The largest capacity
of this machine is 5.0kg.
The thickness, size, type of the cloth will
influence the actual washing capacity. It is
suitable for one time washing to put in
reasonable amount of laundries and the
laundries can be turned round in washing.
Do not select "High" water level for
laundries small than 0.5kg, so as to avoid
splashing of water.

Reference weight of the laundries:

working suit up,down

cotton,about 1120g jeans about 800g
blanket
cotton,about 900g
blending coat
pajamas (about 800g)

jacket
shirt cotton,about
cotton,about 800g
300g

single bed sheet

cotton,about 600g

undershirt Socks
cotton,about 180g underpants
cotton,about 70g blending,about 50g

Downloaded from www.Manualslib.com manuals search engine

 3 Put in the detergent Using process
Inlet for concentrated washing
powder and detergent
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
Detergent box suitable water level.
The instant dissolving of the washing
How to use the whitener powder:
1.Prepare warm water of 30 and a
Fill water to decided level. Dilute container.
the whitener with container. Pour 2.Add the powder while stirring to
it slowly into the washing tub. fully dissolve it.
Avoid using whitener on Put in the prorer quantities detergent
laundries with color or pattern as according to the water level and the
they are prone to lose color. laundries quantities .
The whitener shall not touch the It is suggested not to use high
laundries directly. sudsing detergent.
Refer to the user's manual for Washing powder with poor quality or
the usage and quantity of the long time storage maybe caked.
whitener. Please pay attention to cleaning the
For powder whitener, please detergent box in time.
dissolve it before use.

Standard usage quantity of the detergent and water

quantity
Laundries Water level Water quantity Common powder Concentrated
quantity(kg) (Add 40g in each powder
30L water) (Add 25g in each
30L water)

Above 3.5 HIGH About 48L About 64g About 40g

2.0~3.5 MEDIUM About 37L About 49g About 36g

1.0~2.0 LOW About 30L About 40g About 25g

Below 1.0 VERY LOW About 20L About 27g About 17

Downloaded from www.Manualslib.com manuals search engine

 4 Use the operation buttons Using process
a. Description of the function of the buttons
SURPLUS(MIN)
To indicate remaining min. During
program running.
To indicate remaining reserved
time (hrs) during reservation period.
To indicate fault symbols for abnormal
conditions (see page 16)
Page 16

PROGRAM STATUS PROCEDURE STATUS

STANDARD SOAK
JEANS WASH
GENTLE RINSE
QUICK WASH SPIN
WASH
SPIN
PROGRAM
WATER LEVEL RESERVATION

"PROGRAM/RESERVATION " button

" WATER LEVEL"button Press"PROGRAM/RESERVATION " button
The user selects a suitable water level you can select one or several programs of
depending on the load. StandardJe, ansG , entle,Quick,Rinse and Spin.
Press"PROGRAM/RESERVATION " button
over 2 seconds, you can select the program
of peservtion.the Nixie tube displays the
reserved hrs to the wash cycle end. The
indicator flashes to indicate in-reservation.

Downloaded from www.Manualslib.com manuals search engine

 Using process
"POWER ON/OFF"button
Press "Power On/Off" button to connect
power supply.
After power is connected, pressing this
button will cut off the supply.

"START/PAUSE"button
After the power is switched on, press it to
start the machine
During working, push it to pause working.
During pause, push this button to restart
and continue operation.

POWER
START ON/OFF
PAUSE

Remarks: After pressing "Power On/Off" to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.

Downloaded from www.Manualslib.com manuals search engine

 Using process
b. Operating procedure and
explanations for the buttons

PROGRAM STATUS PROCEDURE STATUS

STANDARD SOAK
JEANS WASH
GENTLE RINSE
QUICK WASH SPIN
WASH POWER
SPIN START ON/OFF
PROGRAM PAUSE
WATER LEVEL RESERVATION

1 Press the "Power On/Off" button to switch on

the power supply

POWER
ON/OFF

2 Press the button of "Program/Reservation" to select

a suitable full-automatic program

PROGRAM
RESERVATION

After switching on, the "Standard" program will be the default. If other full-automatic
program is desired, you can press the button "Program" to get the corresponding
indicator on. Refer to the "Button of 'program'"paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles. Page 10

Downloaded from www.Manualslib.com manuals search engine

 Using process
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries .
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.

Selection method of the procedure programs

Times of pushing Selected procedure
Corresponding Total Time
the"Program Applicable procedure program
program
select"button
When the common Wash(bb) Rinse(cc)
0 Standard laundries need washing Spin(dd) About 39~44
rinse and spin
If the laundries are very Soak(AA) Wash(bb)
JEANS dirty, or the sleeve and
1 collar are dirty, first soak Rinse(cc) Spin(dd)
About 64~91
then wash
When the laundries Wash(bb) Rinse(cc) About 34
2 GENTLE needs to be washed
carefully such as woolen Spin(dd)
textiles or underwear.

3 When the laundries is

QUICK WASH lightly soiled that needs Wash(bb) Rinse(cc) About 10
to be washed quickly. Spin(dd)
When the common
4 WASH laundries need only Wash(bb) About 13~18
washing
When the laundries need
only spinning after About 9
SPIN manual washing Spin(dd)
5 (first drain then spin)

If you push the "Process selector" button for 6 times, it will resume the original
mode, and it will circulate like that.
Time list of each program (minute)
Soak Wash Rinse Spin
Program (min) (min) (min) (min) Total time(min)

Standard / About11~16 Rinse twice,each about 3 About 6 About 39~44

About
Jeans About10~16 Rinse twice, each abut 3 About 6 About 64~91
25~45
Gentle / About6 Rinse once, about 2 About 6 About 34
Quick / About3 Rinse twice, about 2 About 2 About 10
Wash / About11~16 / / About 13~18
Spin / / / About 6 About 9

Downloaded from www.Manualslib.com manuals search engine

 Using process
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Jeans program could combine the process of soak during which the washing
machine firstly soak for about 25~45 min after water filling and then begins to wash.

3 Press the "water level" button to select suitable

water level
WATER LEVEL

After switching on the power, press the button " Water level" to select a water level according
to the load.
Page 10

4 Push the "Reservation" button to select

suitable reserve program
PROGRAM
RESERVATION

After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the "Reservation"
button to set a reserved wash program. Refer to "The button of Reservation" on page 10.

Confirm the reserve program Page 10

When " Reservation " becomes active, the nixie tube

displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation, The washing will finish
you should cut off the supply and reselect. about 18 hours later

5 Press the "start/pause" button START

PAUSE

5 Close the top lid

When the machine spin working, if the
top cover is opened, the washing
machine will stop running and alarm.

Downloaded from www.Manualslib.com manuals search engine

 Using process
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.

After Finishing wash

alarm automatically

7 Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
your using the machine.
Please first pull off the power plug from the receptacle before cleaning.

When washing, lint filter must be used

After using, please clean it in time.

Lint filter:
1.Pull upward to detach Figure 1
Clean

2.Clean the lint

Put it in water and clean while it is still wet.
(See to Figure 1).
Put up Put down Put up
Put down
3.Press downward to assemble. Figure 2

The filter screen of the water inlet If the cabinet is dirty, wipe it with wet cloth
valve is likely to be blocked by Do not flush it directly with water.
foreign materials and influence the Wipe it with neutral detergent.
water inlet. Please clean it with
brush every two months. Do not wipe it with thinner, petrol, alcohol
etc.
hol
Alco Thinner
Petrol

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour),
then close the top lid.

Downloaded from www.Manualslib.com manuals search engine

 Trouble shooting Answer to question
If there's breakdown, please pull off the power plug before checking

Phenomena The reason How to settle

Buzzing upon reservation starts,
Nixie tube indicates "E0" The top lid is not closed Close the top lid

Is the drain hose put down? Put down the drain hose. Open
No or slow drain, nixie tube and close the top lid once.
indicates "E1" , buzzing. Is the drain hose blocked by Clean the foreign material.
foreign material? Open and close the top lid once.
Running pauses during spin, The top cover leaves open Close the top lid
nixie tube indicates "E2"
buzzing
Safety switch actuates, not Are the laundries put slantingly? Re-order the laundries. Close
spin, (after self-correction the top lid.
Is the machine slanting? Level the machine in right
twice), nixie tube displays
"E3", buzzing position. Open and close the
top lid once.

The water tap is not open Open the water tap. Push the
No or slow water filling (not "Start/Pause" button.
reaching the level in 15 min), The water inlet valve is blocked Clean the water inlet valve.
nixie tube indicates "E4", Push the "Start/Pause" button.
buzzing The water pressure is too low Wait for the normal water
and the current is too small pressure before use.
Is there power failure? Use it when the power is on.
Is the power plug loose? Insert the power plug tightly.
Not wash
Does the water level arrive at the Affusion to the set water level.
The machine does
set water level?
not act
Is the power plug loose? Insert the power plug tightly.
Not spin Is the top lid closed? Close the top lid
Are the laundries put orderly? Put the laundries orderly.
Is the machine slanting? Level the machine properly.
There's abnormal sound Is there metal material inside Fasten the buttons and zipper
inside the machine. the washing machine?
Are the laundries slanting in Reorder the laundries. Close the
spinning? top lid.

Is the power plug loose? Insert the plug firmly

No water filling If the water faucet is turned on? Turn on the water faucet
If Power On/Off and Press Power On/Off and
Start/Pause are pressed? Start/Pause

The machine does not act. Is there power failure? Use it when the power is on.
(the indicators are off.) Insert the power plug tightly.
Is the power plug loose?

Downloaded from www.Manualslib.com manuals search engine

 Common phenomena
Phenomena Explanation
The spinning is intermittent when it starts. Balance the laundries to avoid slanting.
Push the"PROGRAM /RESERVATION" button to The program is setting the drain time. Some time is
select "Spin", but it doesn't work. needed before it starts spinning.
There may be some water flowing out of It is the water remained in the factory inspection of
the drain hose in the first use of the machine. performance.
While water filling in wash and rinse, the To prevent splash during water filling.
pulsator pauses rotation

Packing list
Name Quantity

User's manual One

Components of the water

inlet hose One

(Between the upper cushion of the washing machine

Bottom plate One
package and the upper seal of the package carton)

Tapping screws ST4x16 Eight

Lint filter Two

Automatic washing machine One

Downloaded from www.Manualslib.com manuals search engine

 Specification

Model HWM60-10

Rated washing / spinning capacity(kg) 5.0

Water level/Water quantity (about) Lowest/20L Low/30L Mid/37L High/48L

Water inlet pressure(MPa) 0.03-0.78

Downloaded from www.Manualslib.com manuals search engine