Manualslib.
com - Simplified Manuals
Manuals / Brands / VEVOR Manuals / Power Tool / ZD-888 / Manual / PDF
VEVOR ZD-888 MANUAL
Technical Support and E-Warranty Certificate www.vevor.com/support
HEAT PRESS MACHINE
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
HEAT PRESS MACHINE
MODEL:ZD-888
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
-1-
1. Important safety instructions
This instruction manual is intended for your benefit. Please read and follow
the safety, installation, maintenance and troubleshooting steps described
within to ensure your safety and satisfaction.
The contents of this instruction manual are based on the latest product
information available at the time of publication. The manufacturer reserves
the right to make product changes at any time without notice.
Always use common sense and pay particular attention to all the DANGER,
WARNING, CAUTION and NOTICE statements in this manual.
Maintain labels. These carry important information. The label on your tool may
include the following symbols. The symbols and their definitions are as follows:
Warning - To reduce the risk of injury, user must read instructions
manual carefully.
Alternating current
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to
an accident. To reduce the risk of injury, fire, or electrocution,
please always follow the recommendations shown below.
Danger!
Risk of personal injury or environmental damage! Risk of electric
shock! Risk of personal injury by electric shock!
Disposal information:
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
-2-
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not
cause harmful interference, and (2)this device must accept any
interference received, including interference that may cause
undesired operation.
WARNING
Prior to using this product, please read and understand all instructions and
safety warnings. Improper use may result in serious injury or property damage.
1.Warnings must be followed carefully to avoid body injury. Improper use may
result in electric shock, fire, personal injury and other damage:
1)Keep unplugging when moving the machine.
2)Keep unplugging when installing accessories.
3)Place on a flat and stable platform.
4)Do not use this machine in a hazardous-location.
5)Do not use when the machine is not working properly.
6)Do not disassemble and repair this machine.
7)Do not use an unsuitable AC Outlet.
8)Do not touch the heating plate when the machine is working .
9)Do not use it in a humid environment or contact with water Do not infiltrate
liquid in the machine to prevent fire or electric shock caused by short circuit.
10)Do not use the power supply that does not meet the rated voltage. The power
supply that does not meet the specified voltage may cause fire or electric shock.
11)Ensure that the machine is grounded so as not to cause harm to the body.
12)Do not touch the moving part with your fingers during use in case of injuries.
13)If the machine is not in use for a long time, please unplug the power cord from
the socket.
14)Please stop using it if the machine smokes, emits a peculiar smell, or
becomes noisy and in other abnormal conditions.
15)If they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not
-3-
play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision
16)If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
17)In order to avoid a hazard due to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly switched on and off by the
utility.
18）Operating and fixing of this product must be conducted by qualified person.
19）Please install this machine according to our instructions.
20）Once unpack the machine, check it throughout to make sure it is complete.
21）Once unpack the machine, check it throughout to make sure it is complete.
22）If anything is missing or damaged, please consult before operating.
23）The packing material should be placed beyond the reach of children.
24）Please turn off the machine when the operator is absent.If you need a repair,
please ask for an expert and use the original spare part.
25）Do not rinse the machine with water directly.
26）Clean the surface periodically in appropriate method to prevent any damages
brought by oxidization or chemical interference.
FCC INFORMATION
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly
approved by the party.responsible for compliance could void the user's
authority to operate the product.
-4-
Note: This product has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC Rules, These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television
reception,which can be determined by turning the product off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which
the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
INTRODUCTION
A heat press machine uses temperature and pressure with a certain
amount of time to transfer images on items, and the transfer is
permanently embedded into the product. Thank you for choosing our
Heat Press Machine. Please read this user manual carefully and keep it
for future reference. Please contact us if you need any assistance.
-5-
PARAMETER
Item Description ZD-888
1 Rating(s): AC120V 60Hz 1460W( For US user)
2 Rating(s): AC230V 50Hz 1330W( For Europe user)
3 Heat Size 15×15inch （381*381mm)
4 Temperature Range 32℉-480℉ (0-250℃)
5 Timer Range 0-999S
6 Pressure Compensation 5 Levels (P-1 / P-2 / P-3 / P-4 / P-5)
Shut down the machine if there is no action for 30
7 Automatic shut-down
minutes
MAIN STRUCTURE
control panel
Thermal Insulation Cover
Thermal Insulation Base
High temperature silicone mat
Heating plate
Ironing Board
Pull-out Handle Machine Base
-6-
Do not touch the heating area while in use to avoid burns.
(Including:Thermal insulation cover, thermal insulation base, and
heating plate.)
OPERATION INTERFACE
Heating indication
(heating on) Key 1
Key 2
Countdown timer
counter Key 3
Menu settings
(light to access Key 4
settings)
Interface including 4 operation keys:
KEY1 (+ PLUS): Setup data; KEY3 (SETUP): Setup item switching
KEY2 (- MINUS): Setup data; KEY4 (MODE): Fast mode switching
Functional description of short and long keys:
A: KEY1 (+ PLUS): Setup data;
1: short press to start running, motor down to make sure the countdown,
hot stamping work, countdown to the end of the sound 6 times tips and
end.
2：Long press about 5 seconds for production quantity PCS clear zero
B: KEY2 (- MINUS): Setup data;
1: Short press is reset to stop running, the motor rises to the upper limit
switch to stop and standby.
2: Mainly restore fast switching temperature and time
Mode 1: temperature 302 degrees Fahrenheit, time 60 seconds; For
example for nylon T-shirts heat pressing.
-7-
Mode 2: Temperature 356 degrees Fahrenheit, time 60 seconds; For
example for mouse pad heat pressing.
Mode 3: Temperature 392 degrees Fahrenheit for 60 seconds; For
example for cotton bags heat pressing.
C: KEY3 (SETUP): Setting item switching = SETUP
1: Short press for temperature setting -> time setting -> Fahrenheit and
Celsius conversion -> exit
a. Display SH 302: Temperature setting (data change by + key - key)
b. Display St 60: Time setting (data change by + key - key)
c. Display C/F F : ℃ to ℉ conversion (data change by + key - key)
d. Short press 4 times to exit setting
D: KEY4 (MODE): Fast mode switching
1: Short press once for fast mode switching, there are three working
modes, corresponding to the class has a prompt and flashing
Mode 1: temperature 302 degrees Fahrenheit, time 60 seconds; For
example for nylon T-shirts heat pressing.
Mode 2: Temperature 356 degrees Fahrenheit, time 60 seconds; For
example for mouse pad heat pressing.
Mode 3: Temperature 392 degrees Fahrenheit for 40 seconds; For
example for cotton bags heat pressing.
Note A.Short press to switch modes and flash the setting value twice to
achieve fast switching.
Note B.These mode setting value, you can short press the setting item
switch = SETUP to modify, will save the memory of the data.
2: The Count line displays P-1, press the + (plus) key to increase the
pressure, there are five levels (P-1/P-2/P-3/P-4/P-5), and the Time line
displays 60 seconds. Press to the required level and then loosen to
press and stamp.
MAINTAIN NOTE
MAINTAIN NOTE
1. Different items will require different temperature and time settings
because the materials or thickness are different.
-8-
2. This machine is not suitable for children to use or for food processing.
3. Please turn off the machine and unplug the power cord when the
machine is not in use.
4. The heat plate will automatically cool down to the room temperature if
the heat press stays non-use for more than 30 minutes.
5. For better maintenance of heat press, the maximum setting
temperature is 210°C(410°F).
6. To avoid re-heating the first transfer when printing double sided
T-Shirts, insert a sheet of cardboard in between the shirt, adjust the
height to less pressure, then press.
7. Heat plate may pivot slightly back and forth rationally. This is due to
the movement allowance within the clamp assembly, and it is normal.
TROUBLE SHOOTING
1. Temperature drops when the machine starts transferring
It is normal if the machine drops within 10°C, as the printed item is
considerably cold; part of the heat is transferred from machine to the
printed item, especially when transferring patterns on mugs and plates.
2. Printed effect: print color is a pale or faded image
The pressure is not high enough or the temperate is too low, pressing
time is too short. Please adjust the pressure/ temperature or increase the
heating time.
3. Printed effect: print color is too darkened, deep or blurred
Reason 1: The temperature is too high / or pressing time is too
long.Please adjust the temperature or reduce the heating time.
Reason 2: The pressing time is too short/ using poor-quality transfer
paper. Please increase the heating time or use high-quality transfer
paper.
4. The display screen does not turn on or the display screen is
working but the temperature is not heating up.
Pls kindly send us your problems. Our staffs will give instructions
according to your specific problems with patience.
-9-
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd. Suite 250. 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
EC REP Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Pooledas Group Ltd
UK REP Unit 5 Albert Edward House, The
Pavilions Preston, United Kingdom
Made In China
- 10 -
Technical Support and E-Warranty Certificate
www.vevor.com/support
