VALIANT

COMMUNICATIONS VCL-TP, Teleprotection Equipment

& Trip Counter & Alarm Display Unit
With 8 Binary Command Inputs and
8 Binary Command Outputs
Product Overview: The Trip Counter Display and Alarm Extension Unit may be either
powered from the Teleprotection Equipment, or directly from a
VCL-TP, Teleprotection / Digital Tele Protection Coupler (DTPC) /
48V DC, 110V DC, 220V DC or 250V DC power source. 1+1
Digital Protection Signalling Equipment (PSE) is an extremely
Redundant Power is also offered as an option.
reliable and rugged, sub-station hardened equipment that is
designed to operate very reliably even under the most demanding
conditions and harsh environments. The VCL-TP, Teleprotection
Equipment provides up to 8, 2-way independent “binary
command” channels which can be operated selectively; or in a
combination; or simultaneously over a diverse range of
communication interfaces.
Command Transfer Time (including relay operating time)
VCL-TP, Teleprotection Equipment may be used over E1
(2.048Mbps), over IEEE C37.94 or over Ethernet / IP-MPLS / MPLS- Interface type Command Relay Total
TP links. The VCL-TP, Teleprotection (Protection Signalling Transmission Operating Command
Equipment / DTPC) Equipment offers multiple choices of network Time Time Transfer
interfaces which include: Time
E1 (2.048 Mbps) < 2ms <3ms <5ms
Substation interface options include:
E1 plus E1 (1+1 redundant) < 2ms <3ms <5ms
· 8 Binary Commands IEEE C37.94 Optical < 2ms <3ms <5ms
· IEC-61850 GOOSE (PSCH1 and PSCH2) C37.94 plus C37.94 < 2ms <3ms <5ms
Network / Transmission interface options include: (1+1 redundant)
E1 (2.048Mbps) plus IEEE < 2ms <3ms <5ms
· E1 (2.048Mbps) C37.94 (1+1)
· 1+1, E1 (2.048Mbps), point-to-point transmission links with path Ethernet / IP/MPLS / MPLS-TP < 2ms <3ms <5ms
protection / route protection with automatic fail-over Binary Plus IEC-61850 GOOSE < 2ms <3ms <5ms
· E1 (2.048Mbps) transmission links transferring 4+4 Binary Interface over E1/IEEE C37.94
Commands over E1 links in a point-to-multipoint application (i.e. /Ethernet/IP/MPLS / MPLS-TP
4 Binary Commands on E1 Link # A and 4 Binary Commands on IEC 61850 GOOSE Over < 3ms - <3ms
E1 Link # B) Ethernet/IP/MPLS / MPLS-TP
· IEEE C37.94 Optical link
Features and Benefits:
· 1+1 redundant, C37.94 Optical Interface, point-to-point
transmission links with path protection / route protection with ! Unrivaled Speed, Security and Reliability
automatic failover protection ! Bi-directional transmission of 8 Binary Command Inputs and 8
· Ethernet / IP/MPLS / MPLS-TP (10/100BaseT RJ45; or 100BaseFX Binary Command Outputs
Optical) transmission link ! Dual Direction Teleprotection with Teleprotection Command
· E1 plus IEEE C37.94 Optical, 1+1 redundant transmission links Distribution
with path protection / route protection with automatic fail-over ! 8 Channels Trip Counter Display and Alarm Extension Unit
· E1 + Ethernet / IP/MPLS / MPLS-TP (10/100BaseT RJ45; or ! Compact, standard 19-Inch Rack-mountable chassis
100BaseFX Optical) transmission link with path protection / ! Full Duplex Operation, Automatic loop test facility
route protection ! User programmable to support “Direct Tripping”, “Permissive
· E1 plus IEEE C37.94 Optical plus Ethernet / IP/MPLS / MPLS-TP Tripping” and “Blocking” Protection Schemes. Default “Direct
(1+N redundant transmission) links Tripping”.
· IEEE C37.94 Optical plus Ethernet / IP/MPLS / MPLS-TP ! Compliant with IEC 60834-1 and all applicable sections of
(1+1 redundant transmission) links. IEC 60834-2 standards
! SNMPv2 / SNMPv3 management protocol for management and
monitoring
! Network interface options:
– E1, 2.048Mbps; IEEE C37.94 Optical; Ethernet / IP/MPLS /
MPLS-TP with 1+1 and 1+n redundant path protection /
route protection options
The “Trip Counter & Alarm Display” unit shows the total number of
! Substation interface options:
“Trip Input / Trip Receive” and “Trip Output / Trip Send” commands
– 8 Binary Commands
on each of the 8 Teleprotection channels. A manual display counter
– IEC-61850 GOOSE (PSCH1 and PSCH2)
reset option is also provided which may be enabled or disabled by
! Available in 24 VDC, 48V DC, 110V DC, 220V DC, 250V DC,
the system administrator.
configurations.
Trip Counter Display and Alarm Extension Unit is designed to
function as an optional extension of the Teleprotection Equipment
to provide 8 Channels, Digital Trip Counter Display in addition to
providing up to 8 External Relay Alarm outputs.

www.valiantcom.com 1
Valiant Communications Teleprotection Equipment

Smart Grid Ready: Management and Monitoring:

• May be directly interfaced to IEC-61850 Protection Relays using ! Serial RS232 and USB interfaces for local terminal access
GOOSE messages (PSCH.1 and PSCH.2) ! 10/100BaseT Ethernet Interface for remote access over an IP
! Network Interfaces: E1, IEEE C37.94, Optical and IP/MPLS / network
MPLS-TP Interface Options ! Encrypted Password Protection
! Centralized NMS option for remote monitoring and ! Telnet (with clear text disable option)
management of more than 2,000 units from central site over an ! SSH - Secured remote access using Secure Shell Protocol over IP
IP network links
! Assignable user assigned access levels for configuration and ! SNMPv2 / SNMPv3 Traps and NMS for secure, real time remote
monitoring monitoring
! Secure password control ! Centralised NMS option for remote monitoring and
! Encrypted Password Protection management of up to 2,000 units from central site over an IP
! Maintains logs of all successful and un-successful access network
attempts ! Automatic Link Test feature – link testing at user programmable
! User programmable “Input” Command sampling time and periodical intervals
“Output” Command holding time: ! Visual I/O status – LED Display
– Input Sampling Time - Sets the “Sampling Time” of the ! Dry contact external alarm relay to connect an external alarm on
INPUT Pulse an annunciator panel, which can be wired up for either NO or NC
– Output Command holding time is the Relay Deactivation condition.
Time which sets the duration of the OUTPUT Pulse
Reliability and Dependability:
! Complies with all relevant Teleprotection Standards and
Regulatory Compliances. ! Advanced Communication Protocols to ensure reliable
transmission of commands
Performance: ! Compliant with IEC 60834-1 and all applicable sections of IEC
60834-2 standards
! Less than 2ms command transfer time
! Power Supply Immunity to withstand impulse surges and
! Less than 4ms relay operating time
transients of up to 10,000 Volts
! Less than 5ms back-to-back operating time (including relay
! High Quality Relays – withstands voltage 10 kV between coil and
operating time) over IEEE C37.94 Optical Interface
contacts (1.2 × 50 μþs)
! Less than 5ms back-to-back operating time (including relay
! 2.5kV RMS - Contact Input / Output Hi-port dielectric strength
operating time) over 2.048Mbps, E1 Interface
! Maximum Switching Voltage: 400V AC or 300V DC
! Less than 5ms back-to-back operating time (including relay
! Optoisolated Command Inputs
operating time) over an Ethernet / IP/MPLS / MPLS-TP Interface.
! Optoisolated Relay Outputs
! Relays compliant with IEC-255-0-20 / VDE 0435, 0631, 0700,
Flexibility and User Programmability:
40013847 standards
! User programmable input command sampling time for error ! Relays - Mechanical: 10,000,000 operations min. (at 18,000
resistant command inputs operations / hour).
! User programmable output command relay deactivation time.
Technical Specifications:
2.048Mbps, G.703 E1 Interface:
Maintenance:
Number of Interfaces 1
! Manual Loop Test: This feature initiates a “Manual Loop-Test” Conformity (Electrical) G.703 (E1)
of the transmission link that interconnects the “Local” Frame Structure As per ITU (CCITT) G.704
Teleprotection Terminal and the “Remote” Teleprotection PCM Sampling Rate 8000 Samples/sec
Terminal. Bit Rate 2048 Kbps ± 50 ppm
! Automatic Loop Test: The Automatic Link Test feature Code HDB3
automatically initiates “Periodic Loop Tests” at user Nominal Impedance 120 Ohms balanced / 75 Ohms
programmed intervals of the transmission link that un-balanced (any one option only)
interconnects the “Local” Teleprotection Terminal and the Peak Voltage of a mark
“Remote” Teleprotection Terminal. For 120 Ohms Balanced 3.0 V ± 0.3 V
! Delay Measurement: This feature automatically initiates an interface, 75 Ohms 2.37 V ± 0.237 V
end-to-end “Delay Measurement Test” between the “Local” Unbalanced interface
and the “Remote” Teleprotection Terminal through the Nominal Pulse Width 244 ns
interconnecting transmission link. Pulse Mask As per ITU (CCITT) Rec. G.703
Output Jitter < 0.05 UI (in the frequency range of
Event and Alarm Logging:
20Hz to 100 KHz)
! Time-Stamped Alarm Logging Permissible Attenuation 6 dB at 1 MHz
! Time-Stamped Event Logging Return Loss at:
! IRIG-B time synchronization option to synchronize time-stamp 51.2 KHz to 102.4 KHz > 12dB
with GPS 102.4 KHz to 2048 KHz > 18dB
! NTP time synchronization option to synchronize time-stamp 2048 KHz to 3072 KHz > 14dB
with NTP Server Jitter Tolerance As per ITU (CCITT) G.823
! IEEE 1588v2 Slave emulation option to synchronize time-stamp Loss and recovery of frame As per clause 3 of ITU (CCITT) G.732
with PTP Grandmaster. alignment
Connector RJ45 / BNC (only one option)

www.valiantcom.com 2
Valiant Communications Teleprotection Equipment

Technical Specifications: Error Detection and Coding:

C37.94 Optical Fiber Interface ! Link Loss Detection
Option 1 Option 2 ! LOS Detection
Optical Module Type SFP 1x9 ! Line Code Violation Detection
Connector LC ST ! Block Command Encoding as per IEEE C37.94 (for C37.94 optical
Fiber Multi-mode Multi-mode links).
850 nm, 1310 nm Back-to-Back Switching Time (including command transfer and
Distance ≤ 500 m, ≤ 2 Km ≤ 2 Km relay operating time):
Type Laser LED
! Less than 5ms back-to-back operating time (including relay
IEEE C37.94 Fully Compliant Fully Compliant
operating time) over IEEE C37.94 Interface.
Ethernet / IP-MPLS / MPLS-TP Interface ! Less than 5ms back-to-back operating time (including relay
operating time) over G.703 E1, 2.048Mbps interface.
Number of Ports 1 x 10/100BaseT (Copper) Ethernet port
OR Time Clock:
1 x 100BaseFX Optical Port
! Built-in real time clock (RTC)
- Electrical 10/100 Auto-negotiation/MDI-X
! IRIG-B / NTP / IEEE-1588v2 time synchronization options to
(Auto-sensing), Full-Half Duplex, RJ45
synchronize the equipment time with an external IRIG-B, NTP or
Electrical Connector
PTP source for accurate event time-stamping.
- Optical 100Base-FX (Fast Ethernet), SFP
Maximum Frame Size 1500 Bytes Configuration and Access Command Language:
C37.94 Modulation Compliant Optical Fiber Interface ! Command Line Interface (English text commands).
Optical Module Type SFP Transmission Standards and Compliance:
Connector LC
! Electrical: ITU-T, G.703 for 2.048Mbps interface
Fiber Single-mode, 1310 nm, 1550 nm
! Optical: IEEE C37.94 compliant Multi-Mode optical interface
Distance ≤40 Km, ≤80 Km, ≤120 Km, ≤150 Km
! Optical: IEEE C37.94 compliant (modulation only) 1310nm
Type Laser
Single-Mode optical interface
IEEE C37.94 Modulation Only
! Ethernet / IP / MPLS Interface
Teleprotection Outputs Commands: - IEEE-802.3 10/100 Base-T, Auto MDI-X
- IEEE-802.3u 100 Base-FX Optical
Maximum Switching Voltage 400V AC or 300V DC
! Laser: Class I (for Single-Mode Optical Interface) - Eye-safe as
Closing Ability (W/VA) 91W / 1,000VA
per EN 60825-1 specifications.
Short time current (0.5 sec.) 20A
Crossing a continuous-current (A) 5A Teleprotection Standards and Compliances:
Maximum breaking current at 220V DC 8A
! IEC 60834-1 and IEC 60834-2 (Teleprotection Command
Surge protection arrester module Built-in / Integrated,
Systems)
MOV Protected
@ > 350 V DC Command Voltage Options:
Teleprotection Inputs Commands: 48V DC 110V DC 220V DC 250V DC
Command 48V DC, 110V DC, 220V DC, 250V DC Power Supply Options:
Minimum Operating 41V DC, 75V DC, 172V DC, 172V DC
! 24V DC, range 18V DC ~ 32V DC
Command Voltage
! 48V DC, range 36V DC ~ 70V DC
Maximum Operating 72V DC, 140V DC, 290V DC, 290V DC
! 110V DC / 125V DC, range 80V DC ~ 140V DC
Command Voltage
! 220V DC / 250V DC, range 80V DC ~ 300V DC
Sense Off <25V DC,<60V DC,<140V DC,<140V DC
! 110V AC / 220V AC, range 80V AC ~ 264V AC
Consumption on a < 5mA @ 48V DC; < 0.24W
Voltage Withstand: Meets and exceeds IEC 834-1 and IEC 255
digital input (W) < 5mA @ 110V DC; < 0.55W
requirements
< 5mA @ 220V DC; < 1.1W
! Dual / redundant power supply inputs and power supplies
< 5mA @ 250V DC; < 1.25W
are also offered as an option
Input / Output Commands Combination Options: ! Short circuit protection
! Reverse power input protection.
off When all 8 inputs are independent
and When two adjacent inputs are used logically, “and-ed” Power Consumption: < 18 Watts.
or When two adjacent inputs are used logically, “or-ed”
Output Contact Type: COM, NO, NC
Command Transfer Time:
Physical Dimensions:
! Less than 2ms command transfer time
Dimensions Teleprotection Unit Trip Counter Display
Relay Operating Time: Rack mounting Standard 19-Inch. Rack Mount
! Less than 4ms relay operating time Height 88 mm / 133mm 88 mm.
standard 2U / 3U high standard 2U high
Number of Commands: Depth 341mm / 300 mm 240 mm
Number of Input Commands 8 Type - Binary standard 2U / 3U high
Number of Output Commands 8 Type - Potential Free Width 483 mm. 483 mm
Weight 4.3 kg 3.5 kg

www.valiantcom.com 3
Valiant Communications Teleprotection Equipment

Technical Specifications: EMI, EMC, Surge Withstand and other Compliances:

Environmental: EN 50081-2 EN 50082-2 IEC 60068-2-29
Operating Temperature -20 C to +60 C IEC 61000-4-6 IEC 60068-2-6 IEC 60068-2-2
Maximum Operating Humidity 95% R.H., Non-Condensing (Conducted Immunity)
Maximum Operating Altitude Up to 3,000 meters above IEC 60068-2-78 IEC 60068-2-1 IEC 60068-2-14
sea level CISPR 32 / EN55032 Class B
Operation Complies with ETS 300 019 (Conducted Emission and Radiated Emission)
Class 3.2 IS 9000 (Part II Sec. 1-4, Part III Sec. 1-5, Part IV, Part 14 Sec. 1-3)
Storage Temperature -40 C to +70 C IEC 60870-2-1 IEC 61000-4-5 IEC 61000-4-12
Storage Complies with ETS 300 019 IEC 61000-4-3 IEC 61000-4-8 IEC 61000-4-16
Class 1.2 (Radiated Immunity)
Maximum Storage Humidity 98% R.H., Non-Condensing IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-10
Maximum Storage Altitude Up to 3,000 meters above sea IEC 61000-4-11
level
! ESD, Voltage and Surge Withstand: Meets and exceeds
Transportation Complies with ETS 300 019
Class 2.3 IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5, Level 4
specifications.
Electromagnetic Standards Compliance: ! Immunity to Voltage Dips, Short Power Supply Interruptions
! EN 50081-2, EN 50082-2 and Voltage Variations meets and exceeds IEC 61000-4-11,
! IEC 61000-6-2 (immunity) Level 1 specifications.
! IEC 61000-6-4 (emission) Other Regulatory Compliances:
! Complies to IEEE and IEC standards
! RoHS
CE Compliance: ! CE Marking
! Complies with FCC Part 68 and EMC FCC Part 15
! Low Voltage Directive 2014/35/EU
! Electromagnetic Compatibility 2014/30/EU

Application Diagrams:
Typical Point-to-point Application
High Voltage Line
Substation A Substation B

Trip Trip

IEC-61850 IEC-61850
Distance / Distance /
Differential Differential
Protection Protection
Relay Relay
<

8 8 Contact I/O Contact I/O 8 8

< Less than 5 ms + Network Delay >
<

<

VCL-TP IEEE C37.94 - Direct Optical Fiber VCL-TP

Teleprotection Teleprotection

Teleprotection over SDH / E1 PDH Network

High Voltage Line
Substation A Substation B

Optical Fiber
Trip Trip

E1 E1

VCL-TP E1 MUX / E1 MUX / VCL-TP

Teleprotection PDH / SDH PDH / SDH Teleprotection

IEC-61850 IEC-61850
Teleprotection System
Distance / <
< Distance /
Differential Line Protection System Differential
Protection Relay Protection Relay

www.valiantcom.com 4
Valiant Communications Teleprotection Equipment
Teleprotection over E1 plus E1 (1+1 redundant) Interface Application

SDH / SDH /
PDH MUX PDH MUX

SDH Link

1+ 1 E1 Interface

VCL-TP VCL-TP
Teleprotection < < Less than 5 ms + Network Delay > <
Teleprotection
<

<
8 8 8 8
<

<
Contact I/O Contact I/O

1+1 Redundant E1 interface with link failure detection and automatic failover

Teleprotection over E1, P-M-P (Point to Multi-point) Application

SDH SDH SDH

SDH Link SDH Link

E1 Link E1 Link E1 Link E1 Link

#A #A #B #B

VCL-TP VCL-TP
Teleprotection < < < < Teleprotection
< Less than 5 ms < Less than 5 ms
<

<

<
4 4 + Network Delay > 8 8 + Network Delay > 4 4
<

<

<
Contact I/O Contact I/O Contact I/O
VCL-TP Teleprotection

E1 (2.048Mbps) transmission link in a point-to-multipoint application

4 Binary Commands on E1 Link # A and 4 Binary Commands on E1 Link # B

Teleprotection over E1, (Add-Drop) Application

SDH SDH SDH

SDH Link SDH Link

E1 Link
E1 Link Fractional E1 Link
#A E1 Link #C
#B
VCL-TP VCL-TP
Teleprotection < < < < Teleprotection
< Less than 5 ms < Less than 5 ms
<

<

<

8 8 + Network Delay > 4 4 + Network Delay > 4 4

<

<

<

Contact I/O Contact I/O Contact I/O

VCL-TP Teleprotection

E1 (2.048Mbps) transmission link in a add-drop application -

4 x Binary Commands to Site # B and
4 Binary Commands to Site # C

www.valiantcom.com 5
Valiant Communications Teleprotection Equipment
Teleprotection over IEEE C37.94 Optical Interface

High Voltage Line

Trip Trip
IEC-61850 IEC-61850
Distance / Distance /
Differential Differential
Protection Protection
Relay Relay
<

<
Contact I/O 8 8 8 8 Contact I/O
< Less than 5 ms + Network Delay >
<

<
VCL-TP IEEE C37.94 - Direct Optical Fiber
VCL-TP
Teleprotection <
<
Teleprotection
1 KM to < 180 KMS (47dB)

Teleprotection over E1 (2.048Mbps) + C37.94 Interface (Redundant Transmission Links)

SDH / SDH /
PDH MUX PDH MUX

SDH Link

E1 Interface E1 Interface

VCL-TP VCL-TP
Teleprotection IEEE C37.94 - Direct Optical Fiber Teleprotection
<

<

8 8 8 8
< < Less than 5 ms + Network Delay > <
<

<

Contact I/O Contact I/O

Teleprotection over IEEE C37.94 Interface + Ethernet / IP / MPLS Network (Redundant Transmission Links)

Ethernet / IP / MPLS Ethernet / IP / MPLS

IP / MPLS
Network

VCL-TP VCL-TP
Teleprotecon Teleprotecon
IEEE C37.94 - Direct Optical Fiber
<
<

8 8 8 8
< < Less than 5 ms + Network Delay > <
<

<

Contact I/O Contact I/O

www.valiantcom.com 6
Valiant Communications Teleprotection Equipment
Teleprotection over C37.94 and E1 - Redundant Distance Protection Scheme using “OR” Binary Commands
MAIN 1
Protection Relay

E1 to SDH Network Binary Commands

Teleprotection / Digital
Protection Coupler
“OR”

C37.94 (Optical)
Binary Commands
Teleprotection / Digital
MAIN 2
Protection Coupler
Note: Protection Relay

1. This diagram illustrates the scheme in which the MAIN 1 and MAIN 2 relays are connected to provide Teleprotection over C37.94
and E1 Channels to implement the concept of "Reliable Communications" and 1+1 Redundancy for establishing a resilient
protection network.
2. The “OR” function is used to provide alternate tripping paths for both MAIN 1 and MAIN 2 protection relays, to provide fail-safe
distance protection.

Distance Protection Reliability Index over E1 plus C37.94 using “OR” Commands.
Reliability Index in a
Reliability Index Traditional Distance Protection Application

Distance
Protection Relay

E1 8 x Binary Commands
1
To Network
VCL-TP
Teleprotection

Enhanced Distance Protection Application Distance

Protection Relay

E1 8 x Binary Commands
5
10 To Network
VCL-TP
Reliability “OR”
Teleprotection
Increased by
100, 000
Times

E1 / C37.94 8 x Binary Commands

To Network
VCL-TP
Teleprotection Distance
Protection Relay

Redundant Protection Scheme with “OR” Binary Commands

Teleprotection over E1 - Redundant Distance Protection Scheme using “OR” Binary Commands
MAIN 1
Protection Relay

E1 Binary Commands
<< <
<
Teleprotection / Digital
Protection Coupler
“OR”

E1 < <
< <
Binary Commands
Teleprotection / Digital
MAIN 2
Protection Coupler
Protection Relay
Note:
1. This diagram illustrates the scheme in which the MAIN 1 and MAIN 2 relays are connected to E1 Teleprotection equipment
(Teleprotection over E1 interfaces) to implement the concept of "Reliable Communications" and provide 1+1 Redundancy for
establishing a resilient protection network.
2. The "OR" function is used to provide alternate tripping paths for both MAIN 1 and MAIN 2 protection relays, to provide fail-safe
distance protection.

www.valiantcom.com 7
Valiant Communications Teleprotection Equipment
Ordering Information: # Add Power Supply Option (Any One Option)
BASE UNIT without Network Interface and PSUs: Part # Description
AC220 1 x 110~240V, 50/60 Hz, AC Power Supply Input
Part # Description
DC048 1 x 48V DC Power Supply Input
VCL-TP-1531 VCL-TP, TeleProtection Terminal Equipment
DC220 1 x 110V~250V DC Power Supply Input
19-Inch, Rack mountable
AC220R 2 x 110~240V, 50/60 Hz, AC Power Supply Input
- Management: SNMP/Telnet Port (RJ45 (F)),
[Redundant]
Serial Port (USB, DB-9 COM), Serial Port, EMS,
ACDC048 1 x 110~240V AC, 50/60 Hz, Power Supply Input
Graphical User Interface (GUI)
1 x 48V DC Power Supply Input
- Installation Kit: System Core Cables, Mounting
ACDC220 1 x 110~240V AC, 50/60 Hz, Power Supply Input
Hardware, Documentation, User Manual
1 x 110~250V DC Power Supply Input
DC048DC220 1 x 48V DC Power Supply Input
Substation Interface:
1 x 110~250V DC Power Supply Input
BINARY - 8, 2-way independent binary
DC048R 2 x 48V DC Power Supply Input [Redundant]
commands
DC220R 2 x 110V~250V DC Power Supply Input
[Redundant]
Network Interfaces:
[# Add Network Interfaces]

[# Add Power Supply ]

[# Add Trip Counter Display (optional)]

# Select SFP Option (1 SFP per UNIT):

Part # Description
VCL-EMOD 0469-TP SFP Transceiver, Duplex LC, 14dB, 820nm, 1 Mile / 2Km, MM (Multi-Mode)
VCL-EMOD 0193-TP SFP Transceiver, Duplex LC, 13dB, 1310nm, 9 Miles / 15Km, SM (Single-Mode)
VCL-EMOD 0194-TP SFP Transceiver, Duplex LC, 29dB, 1310nm, 25 Miles / 40Km, SM (Single-Mode)
VCL-EMOD 0217-TP SFP Transceiver, Duplex LC, 29dB, 1550nm, 49 Miles / 80Km, SM (Single-Mode)
VCL-EMOD 0402-TP SFP Transceiver, Duplex LC, 37dB, 1550nm, 99 Miles / 160Km, SM (Single-Mode)
VCL-EMOD 0171-TP SFP Transceiver, Duplex LC, 46dB, 1550nm, 111 Miles / 180Km, SM (Single-Mode)
VCL-EMOD 0244-TP SFP Transceiver, Duplex LC, 47dB, 1550nm, 124 Miles / 200Km, SM (Single-Mode)
VCL-EMOD 0364-TP SFP Transceiver, Duplex LC, CWDM, 46dB, 1550nm, 161 Miles / 260Km, SM (Single-Mode)
VCL-EMOD 0490-TP SFP Transceiver, Duplex LC, CWDM, 50dB, 1550nm, 167 Miles / 270Km, SM (Single-Mode)

# Add VCL-TP external feed-through terminal block panel optional, if required

Part # Description
VCL-HTER 1030-60IO VCL-TP external feed-through Knife
disconnect Terminal Block (TB) 60-I/O
(2 x input and 2 x output)
19" 2U High Rack Mount Version
VCL-HRNS 1294-08-01.00M 8-Point, Feed-through Cable
(8PINF/RA/Screw Flange to open), 1 meter]
[4 cables required to order]
VCL-HRNS 1294-04-01.00M 4-Point, Feed-through Cable
(8PINF/RA/Screw Flange to open, 1 meter)
[2 cables required to order]
VCL-HRNS 1294-03-01.00M 3-Point, Feed-through Cable
(5PINF/RA to open, 1 meter)
[2 cable required to order]

www.valiantcom.com 8
Valiant Communications Teleprotection Equipment

# Add Network Interface (Any one option)

Part # Description
2715-2730-2733-O 1 x C37.94 protocol optical interface [without SFP]
2715-2730-2734-O 1 x C37.94 protocol optical 820nm, (MM, TX/RX, ST) interface
2715-2730-2735-2O 1+1 redundant, C37.94 protocol Optical Interface with automatic failover protection
- 2 x C37.94 protocol Optical Interface [without SFP]
2715-2730-2733-E1O 1+1 redundant, automatic protection E1 Plus C37.94 interface
- 1 x 2.048Mbps E1 (120 Ohms) digital interface [RJ45 (F)]
- 1 x C37.94 protocol optical interface [without SFP]
2715-2730-2734-E1O 1+1 redundant, automatic protection E1 Plus C37.94 interface
- 1 x 2.048Mbps E1 (120 Ohms) digital interface [RJ45 (F)]
- 1 x C37.94 protocol optical 820nm, (MM, TX/RX, ST) interface
2715-2730-2736-1E1 1 x 2.048Mbps E1 (120 Ohms) digital interface [RJ45 (F)]
2715-2730-2736-2E1 1+1 redundant, automatic protection E1 interface
- 2 x 2.048Mbps E1 (120 Ohms) digital interface [RJ45 (F)]
2715-2730-2736-E1-PMP - 2.048Mbps E1 (120 Ohms) digital interface [RJ45 (F)] (Point-to-multipoint)
2715-2714-2733-O-IP 1+1 redundant, C37.94 / IP interface with automatic failover protection
C37.94 Interface
- 1 x C37.94 protocol Optical Interface [without SFP]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
2715-2714-2733-E1O-IP 1+1 redundant, E1 Plus C37.94 Plus IP interface with automatic 1+N failover protection
E1 Interface
- 1 x 2.048Mbps E1 (120 Ohms) interface [RJ45 (F)]
C37.94 Interface
- 1 x C37.94 protocol optical interface [without SFP]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
2715-2714-2736-1E1-IP E1 Plus Ethernet / IP interface with automatic failover protection
E1 Interface
- 1 x 2.048Mbps E1 (120 Ohms) interface [RJ45 (F)]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
2715-2714-2736-2E1-IP 1+1 E1 Plus Ethernet / IP interface with automatic failover protection
E1 Interface
- 2 x 2.048Mbps E1 (120 Ohms) interfaces [RJ45 (F)]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
2715-2714-2736-1E1-IP-GOOSE E1 Plus Ethernet / IP interface with automatic failover protection
E1 Interface
- 1 x 2.048Mbps E1 (120 Ohms) interface [RJ45 (F)]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
IEC-61850 - GOOSE (Substation Interface)
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
2715-2714-2736-2E1-IP-GOOSE 1+1 E1 Plus Ethernet / IP interface with automatic failover protection
E1 Interface
- 2 x 2.048Mbps E1 (120 Ohms) interfaces [RJ45 (F)]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
IEC-61850 - GOOSE (Substation Interface)
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]

www.valiantcom.com 9
Valiant Communications Teleprotection Equipment

# Add Network Interface (Any one option)

Part # Description
2715-2714-2733-E1O-GOOSE 1+1 redundant, E1 / C37.94 interface with automatic failover protection
E1 Interface
- 1 x 2.048Mbps E1 (120 Ohms) interface [RJ45 (F)]
C37.94 Interface
- 1 x C37.94 protocol Optical Interface [without SFP]
IEC-61850 - GOOSE (Substation Interface)
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
2715-2714-2733-O-IP-GOOSE 1+1 redundant, C37.94 / IP interface with automatic failover protection
C37.94 Interface
- 1 x C37.94 protocol Optical Interface [without SFP]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
IEC-61850 - GOOSE (Substation Interface)
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
2715-2714-2733-E1O-IP-GOOSE 1+1 redundant, E1 / C37.94 / IP interface with automatic failover protection
E1 Interface
- 1 x 2.048Mbps E1 (120 Ohms) interface [RJ45 (F)]
C37.94 Interface
- 1 x C37.94 protocol Optical Interface [without SFP]
Ethernet / IP / MPLS Interface
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
IEC-61850 - GOOSE (Substation Interface)
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
2714-2154 IEC-61850 - GOOSE over IP / MPLS
- 2 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
2432-1546 IEC-61850 - GOOSE over E1
- 1 x 10/100BaseT Electrical Ethernet Port [RJ45 (F)]
- 1 x 100BaseFX Optical Ethernet Port [without SFP]
- 1 x 2.048Mbps E1 (120 Ohms) digital interface [RJ45 (F)]
E1-120-75-CONV E1 120 Ohms (RJ45) to E1 75 Ohms (BNC) Converter

# Add Trip Counter Display (External Trip Counter Display) – optional, if required
Part # Description
VCL-DISP-1599- Trip Counter Display / Alarm Extension Unit
1597-08-DC048 – 16 x Trip (8 Input and 8 Output) Counter Display
– 8 x User Assignable External Relay Alarm outputs
19-Inch, 2U High Rack mountable
– 1 x (-) 48V DC Power Supply Input
VCL-DISP-1599- Trip Counter Display / Alarm Extension Unit
1597-08-DC048R – 16 x Trip (8 Input and 8 Output) Counter Display
– 8 x User Assignable External Relay Alarm outputs
19-Inch, 2U High Rack mountable
– 2 x (-) 48V DC Power Supply Inputs
Optional - Trip Counter Display Panel and Alarm Extension Unit:
! The Trip Counter Display Panel and Alarm Extension Unit can be installed in conjunction with the Teleprotection unit to display the
count of the “Trip Input Sense” and “Trip Output Initiate” events and to obtain and extend additional alarm outputs to the Sub-
Station “Alarm Annunciator” panel.
! 16, (8 Inputs and 8 Outputs) Trip Counter Display Panel to display the count of the “Trip Input Sense” and “Trip Output initiate” events
! Additionally provides 8 user configurable external dry contact alarm outputs to extend up to 8, separate user assignable alarms
! Each alarm output can be individually assigned to any type of event, including failure of Transmission Link, PSU Failure Alarm, Trip
Input Sense / Trip Output Initiate Commands.

Note : The Trip Counter Display and Alarm Extension Unit may, or may not be ordered with the Teleprotection Equipment,
depending upon the user requirements.

www.valiantcom.com 10
Valiant Communications Teleprotection Equipment

Notes:

Technical specifications are subject to changes without notice.

Revision – 7.3, June 21, 2024

U.K. U.S.A. INDIA

Valiant Communications (UK) Ltd Valcomm Technologies Inc. Valiant Communications Limited
Central House Rear Office 4000 Ponce de Leon Blvd., 71/1, Shivaji Marg,
124 High Street, Hampton Hill Suite 470, Coral Gables, New Delhi - 110015,
Middlesex, TW12 1NS, U.K. FL 33146, U.S.A. India

www.valiantcom.com 11