Scribd
Upload
56 views2 pages

6M33.2 GB

The document provides specifications for a 6-cylinder, 4-stroke diesel engine with a total displacement of 19.6 liters and a compression ratio of 15:1. It highlights customer benefits such as low emissions, fuel efficiency, and extended maintenance intervals, along with performance ratings for different power outputs. Additionally, it outlines standard equipment and performance characteristics under various operating conditions.

Uploaded by

pngchanh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

6M33.2 GB

The document provides specifications for a 6-cylinder, 4-stroke diesel engine with a total displacement of 19.6 liters and a compression ratio of 15:1. It highlights customer benefits such as low emissions, fuel efficiency, and extended maintenance intervals, along with performance ratings for different power outputs. Additionally, it outlines standard equipment and performance characteristics under various operating conditions.

Uploaded by

pngchanh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

6 M33.

2
4 Stroke diesel engine, direct injection
Bore and stroke 150 x 185 mm
Number of cylinders 6 in line
Total displacement 19,6 litres
Compression ratio 15/1
Engine rotation (ISO 1204 standard) counterclockwise
Idle speed 650 rpm
Flywheel housing SAE 1
Flywheel SAE 14’’

Customer benefits
Continuous compact power with reference torque performance in its category
Global environment care with low exhaust emissions and controlled fuel consumption at any running cycle
Simple technology with mechanical injection
Life cycle cost efficiency with extended mean time between overhauls (MBTO)

Rated power - Fuel consumption


Duty kW hp rpm Fuel consumption Peak torque / speed IMO
g/kWh (N.m / rpm)
P1 478 650 1800 211 3056 / 1300 II
P1 515 700 1800 209 3085 / 1300 II
P2 551 750 1800 214 3684 / 1400 II

P1 P2
Power definition Application Unrestricted continuous Continuous
Standard ISO 3046/1 Engine load variations Very little / none Numerous
Mean engine load factor 80 - 100% 30 - 80%
Reference conditions
Annual working time 5000 hr + 3000 - 5000 hr
Ambient temperature 25 °C / 77 °F
Barometric pressure 100 kPa Time at full load Unlimited 8 hr every 12 hr
Relative humidity 30%R
Raw water temperature 25 °C / 77 °F Dimensions and dry weight (mm / kg)
Fuel oil
Relative density 0,840 ± 0,005
Lower calorifi c power 42 700 kJ/kg
Consumption tolerances 0 ± 5%
Inlet limit temperature 35 °C / 95 °F
1417

Our ratings also comply with classification


societies maximum temperature definition
530

without power derating.

Ambient temperature 45 °C / 113 °F


Raw water temperature 32 °C / 90 °F 1138 1870
2390

Baudouin.com POWER YOUR SUCCESS


Standard equipment
Cooling system Fresh / raw water heat exchanger with integrated thermostatic valves and expansion tank
Cast iron centrifugal fresh water pump, mechanically driven
Bronze self-priming raw water pump, mechanically driven

Lubrication system Full flow screwable oil filters


Fresh water cooled lube oil cooler
Lube oil purifier with replaceable cartridge
Manual prelubricating oil pump

Fuel system In-line injection pump with flanged mechanical governor


Double wall injection bundle with leakage collector
Duplex fuel filters replaceable while engine running

Intake air and exhaust system Fresh water cooled turbo blower

M.D.4.EN.03.17 Moteurs Baudouin reserve the right to modify these specifications, without notice. Document not contractual.
Fresh water cooled exhaust gas manifold

Electrical system Voltage: 24VDC


Electrical starter on flywheel crown
175A battery charger
Engine room and bridge panels

Performance Performance Performance


P1 - 478 kW - 1800 rpm P1 - 515 kW - 1800 rpm P2 - 551 kW - 1800 rpm

Société Internationale des Moteurs Baudouin


Technoparc du Brégadan - 13260 Cassis - France - Tél. +33 488 688 500 - Baudouin.com

You might also like