Casually Cozy
Knitted hat and scarf in DROPS Delight and DROPS Kid-Silk. The hat is worked in garter
stitch and rib; the scarf is worked in garter stitch with angles.
DROPS 192-6
DROPS Design: Pattern no de-194
Yarn group A + A or C
-------------------------------------------------------
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 1 din 7
:
YARN FOR WHOLE SET:
Sizes (for hat; the scarf is one-size): S/M - M/L - L/XL
Materials:
DROPS DELIGHT from Garnstudio (belongs to yarn group A)
250-250-250 g colour 19, sunset waves
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
100-100-100 g colour 25, sea green
YARN FOR HAT:
Sizes: S/M - M/L - L/XL
Fits head size: approx. 54/56 - 56/58 - 58/60 cm
Materials:
DROPS DELIGHT from Garnstudio (belongs to yarn group A)
50-50-50 g colour 19, sunset waves
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
25-25-25 g colour 25, sea green
YARN FOR SCARF:
Measurements:
Width: approx. 30 cm
Length: approx. 150 cm
Materials:
DROPS DELIGHT from Garnstudio (belongs to yarn group A)
200 g colour 19, sunset waves
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
75 g colour 25, sea green
-------------------------------------------------------
ACCESSORIES FOR THE PIECE:
HAT:
KNITTING TENSION:
17 stitches in width and 34 rows in height with garter stitch and 1 strand of each quality (2
strands) = 10 x 10 cm.
NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 5 MM: length 40 cm for garter stitch.
DROPS CIRCULAR NEEDLE SIZE 4.5 MM: length 40 cm for rib.
The needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 2 din 7
:
size. If you get too few stitches on 10 cm, change to a smaller needle size.
SCARF:
KNITTING TENSION:
17 stitches in width and 34 rows in height with garter stitch and 1 strand of each quality (2
strands) = 10 x 10 cm.
NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 5 MM: length 60 cm for garter stitch.
The needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle
size. If you get too few stitches on 10 cm, change to a smaller needle size.
-------------------------------------------------------
EXPLANATIONS FOR THE PATTERN:
-------------------------------------------------------
RIDGE/GARTER STITCH (worked back and forth):
All rows are knitted (1 ridge = knit 2 rows).
DIAGRAM (for scarf):
Diagram A.1 shows the parts the scarf is made up of and which direction they are worked.
-------------------------------------------------------
START THE PIECE HERE:
-------------------------------------------------------
HAT - SHORT OVERVIEW OF THE PIECE:
The piece is worked back and forth with circular needle and is sewn together mid back to finish.
HAT:
Cast on 80-84-88 stitches with 1 strand Delight and 1 strand Kid-Silk (= 2 strands) with circular
needle size 4.5 mm. Knit 1 row (= wrong side). Then work rib as follows:
From the right side: Knit 1, * purl 2, knit 2 *, work from *-* and finish with knit 1.
From the wrong side: Purl 1 * knit 2, purl 2 *, work from *-* and finish with purl 1.
Work this rib until the piece measures 16 cm (the rib section will be folded in the middle), adjust
so that the next row is from the right side (i.e. the first row of the piece is purled; this is important
as the rib will be folded up on the right side to finish and then this row will be seen as a knitted
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 3 din 7
:
row (stocking stitch)). Change to circular needle size 5 mm and continue in GARTER STITCH – see
description above. Work until the piece measures approx. 26-27-28 cm from the cast-on edge. On
the next row decrease 0-4-0 stitches evenly on row = 80-80-88 stitches. Insert 8 markers in the
piece as follows: 1 marker is inserted after 5 stitches, the next 7 markers are inserted with 10-10-
11 stitches between each and there are 5 stitches left on the row after the last marker. Knit 1 row.
Then decrease on every 2nd row as follows:
Row 1: Knit and decrease by knitting 2 stitches together before each marker = 8 stitches
decreased.
Row 2: Knit.
Row 3: Knit and decrease by knitting 2 stitches together after each marker = 8 stitches decreased.
Row 4: Knit.
Repeat rows 1-4 a total of 4 times = 16-16-24 stitches on the needle.
SIZE L/XL: Repeat rows 1-2 one more time = 16 stitches on the needle.
ALL SIZES:
On the next row knit all stitches together 2 and 2 = 8-8-8 stitches. Cut the strands, pull them
through the remaining stitches a couple of times, tighten and fasten well. The piece measures
approx. 31-32-33 cm.
ASSEMBLY:
Sew the hat together mid back; sew in the outermost loop of the outermost stitch so that the
seam is flat. Fold the rib border up, so that the first row on the rib is 1 row of stocking stitch. You
can fasten the folded section in place with a couple of stitches on each side of the hat, if you wish.
SCARF – SHORT OVERVIEW OF THE PIECE:
The piece is worked back and forth with circular needle. The whole piece is knitted in one go, but
you will work in parts which are then worked together. The piece is worked in GARTER STITCH –
see description above. All yarn overs are knitted to leave holes.
SCARF:
Cast on 3 stitches with 1 strand Delight and 1 strand Kid-Silk (= 2 strands) with circular needle
size 5 mm.
Work PART 1 as follows:
PART 1:
ROW 1 (= right side): Knit 1, 1 yarn over, knit 1, 1 yarn over and knit 1.
ROW 2 (= wrong side): Knit.
ROW 3 (= right side): Knit 1, 1 yarn over, knit until there is 1 stitch left, 1 yarn over and knit 1.
ROW 4 (= wrong side): Knit.
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 4 din 7
:
Work ROWS 3-4 like this until there are 69 stitches and 2 yarn overs on the row - the last row is
ROW 3. Part 1 is finished, see diagram A.1 for overview.
Now work PART 2 as follows:
PART 2:
ROW 5 (= wrong side): Knit 1, 1 yarn over, slip the next stitch as if to knit, knit 1 and pass the
slipped stitch over the knitted stitch (this stitch will from now on be called the decrease-stitch).
The remaining stitches on the left needle are not worked; leave them on the needle. Turn the
piece.
ROW 6 (= right side): Knit.
ROW 7 (= wrong side): Knit 1, 1 yarn over, knit to the decrease-stitch, slip this stitch as if to knit,
knit 1 and pass the slipped stitch over the knitted stitch. The remaining stitches on the left needle
are not worked; leave them on the needle. Turn the piece.
ROW 8 (= right side): Knit.
Work ROWS 7-8 until there are 35 stitches left on PART 1 after the last decrease-stitch (the last
row is from the wrong side) and then knit the 35 stitches from PART 1 from the wrong side. Part 2
is finished; see diagram A.1 for overview.
Now work PART 3 as follows:
PART 3:
ROW 9 (= right side): Knit 1, 1 yarn over, knit as far as the decrease-stitch, slip this stitch as if to
knit, knit 1 and pass the slipped stitch over the knitted stitch. The remaining stitches on the left
needle are not worked; leave them on the needle. Turn the piece.
ROW 10 (= wrong side): Knit.
Work ROWS 9-10 like this until there are 17 stitches left on part 2 after the last decrease-stitch
(the last row is from the right side) and then knit the last 17 stitches from part 2 from the right
side. Part 3 is finished; see diagram for overview.
Now work PART 4 as follows:
PART 4:
ROW 11 (= wrong side): Knit 1, 1 yarn over, knit as far as the decrease-stitch, slip this stitch as if
to knit, knit 1 and pass the slipped stitch over the knitted stitch. The remaining stitches on the left
needle are not worked; leave them on the needle. Turn the piece.
ROW 12 (= right side): Knit.
Work ROWS 11-12 like this until there are 35 stitches left on part 3 after the last decrease-stitch
(the last row is from the wrong side) and then knit the last 35 stitches from part 3 from the wrong
side.
Work PART 3 and PART 4 alternately until the piece measures approx. 130 cm - measured in the
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 5 din 7
:
middle of the piece and adjust so that the last part worked is part 3. Continue working ROWS 9-10
of PART 3 until there are no stitches left on PART 4, the next row is from the wrong side.
Now work PART 5 as follows:
PART 5:
ROW 13 (= wrong side): * Knit 1, 1 yarn over, slip 1 stitch as if to knit, knit 1 and pass the slipped
stitch over the knitted stitch. The remaining stitches on the left needle are not worked; leave them
on the needle. Turn the piece.
ROW 14 (= right side): Knit.
ROW 15 (= wrong side): Knit 1, 1 yarn over, knit as far as the decrease-stitch, slip this stitch as if
to knit, knit 1 and pass the slipped stitch over the knitted stitch. The remaining stitches on the left
needle are not worked; leave them on the needle. Turn the piece.
ROW 16 (= right side): Knit.
Work ROWS 14-16 until there are 35 stitches left on part 3 after the last decrease-stitch.
Now work as follows from the wrong side:
ROW 17 (= wrong side): Knit 1, 1 yarn over, slip 1 stitch as if to knit, knit 2 together and pass the
slipped stitch over the knitted together stitches. Knit as far as the decrease-stitch, slip this stitch
as if to knit, knit 1 and pass the slipped stitch over the knitted stitch. The remaining stitches on
the left needle are not worked; leave them on the needle. Turn the piece.
ROW 18 (= right side): Knit.
Work ROWS 17-18 until there are 3 stitches left on part 3 after the last decrease-stitch.
Now work as follows from the wrong side:
ROW 19 (= wrong side): Knit 1, slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over
the knitted stitch, slip the decrease-stitch as if to knit, knit 1 and pass the slipped stitch over the
knitted stitch. Turn the piece.
ROW 20 (= right side): Slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted
stitch, slip the decrease-stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch
(= 3 stitches on needle). Turn the piece and cast off the last stitches. Cut and fasten the strands.
Diagram explanations
= Knitting direction
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 6 din 7
:
Have you finished this pattern?
Tag your pictures with #dropspattern #casuallycozyset or submit them to the #dropsfan gallery.
Do you need help with this pattern?
You'll find 21 tutorial videos, a Comments/Questions area and more by visiting the pattern on
garnstudio.com.
Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from
the store that sold you the yarn.
© 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about
what you can do with our patterns at the bottom of each pattern on our site.
https://www.garnstudio.com/includes/pattern-print.php?id=8665&cid=19 24.12.2024, 16 50
Pagina 7 din 7
:
